REPAIR AND MAINT OF HIGH MAST LIGHT, TARMAC LIGHTS, SEARCH LIGHTS, TOWER LIGHTS, PERIMETER LIGHTS AND SECURITY LIGHTS ALONGWITH CONNECTED ITEMS AT GE (AF) TECH AREA AGRA

Amount

Excavation in trenches in soft/ loose soil n.exc 1.5m wide and n. exc 1.5m depth for laying of cable, errection of poles, stay and pipe line,and getting out complete all as specified and directed.

Returning & filling including spreading, leveling watering and well ramming in layers n. exc 25 cm thick in soil complete all as specified and directed.

Removing excavated soil n. exc 50 m and depositing where directed at a level n.exc. 1.5 mtr above the starting point complete all as specified and directed.

M&L for laying of bricks locally available sub class 'B' bricks (old size) for cable protection cover, laid flat and dry in trenches over the cable perpendicular to the direction of cable complete all as specified and directed.

Labour only for re-laying of old serviceable bricks retreived from taking out of cable for cable protection cover, laid flat and dry in trenches over the cable perpendicular to the direction of cable complete all as specified and directed.

M&L for local sand coushioning with dry and clean sand over and under the cable for protection of cable , 80 mm thick sand laid before laying the cable 150 mm thick sand after laying the cable complete all as specified and directed. Note : Thickness of sand will be measured after punning for payment purpose.

Taking out old serviceable/ unserviceable LT UG cables of any size of 10 to 70 sq mm, 2/3.5/4 core from trenches, poles/walls and floor includuing taking out old serviceablee bricks from trenches complete all as specified and directed.

Laying only serviceable XLPE LT UG cable PVC insulated , bedded armoured heavy duty electric cable 1100 volts grade with aluminium conductor of 10 sqmm to 70 Sqmm 3.5/4 core sizes laid in trenches or fixed on walls/floor/pole complete all as specified and as directed.

Supply and Laying XLPE LT UG cable PVC insulated , bedded armoured heavy duty electric cable 1100 volts grade with aluminum conductor of the following sizes laid in trenches or fixed on wall/floor/poles complete all as specified and as directed :-

10 Sq mm 4 core

16 Sq mm 4 core

25 Sq mm 4 core

35 Sq mm 3.5 core

50 Sq mm 3.5 core

70 Sq mm 3.5 core

S&F Security light bracket 1.50 RM long, made of GI pipe 40 mm dia, light grade for mounting Security light, bracket bent to shape including suitable clamps made with flat iron 32x6mm -(04 Nos) 02 Sets nut bolt including painted with two coat aluminium paint over a coat of red oxide primer and with and including all fixing arrengment complete all as specified and directed.

Taking down carefully unserviceable LED street light, flood light fitting upto 250 watts of any type from pole / wall / High mast etc, dismantling and checking out serviceability of parts / circuit such as drivers, MCPCB etc, repalcement of unserviceable parts with new parts including soldering with existing circuit board, reassembling and refixing in position including connecting, testing complete all as specified and directed. Note : New parts will be measured and paid separately under relevant items of BOQ as 'supply only'.

Supply only driver suitable for LED Security light 25/30 Watt complete all as specified and directed.

Supply only driver suitable for LED Security light 45/60/90 Watt complete all as specified and directed.

Supply only driver suitable for LED Flood light 90/120/150 Watt complete all as specified and directed.

Supply only driver suitable for LED Flood light 200/250 Watt complete all as specified and directed.

Supply and fixing in repair 30 watt LED road way light fitting luminaires comprising of epoxy powder coated housing, enclosed with glass cover in frame IP-66, complete all as specified and directed.

Supply and fixing in repair of 45 watt LED road way light fitting luminaires ,comprising of epoxy powder coated housing ,enclosed with glass cover in frame , IP-65, with 110LM/W complete all as specified and directed.

Supply and fixing in repair of 90 watt LED road way light fitting luminaires ,comprising of epoxy powder coated housing ,enclosed with glass cover in frame , IP-65, with 110LM/W complete all as specified and directed.

Supply and fixing in repair 150 watt LED flood light fitting suitable for high mast light with and including all fixing arrangement high grade aluminium pressure die cast and toughend glass 110 lumen/watt and high spread using high quality lenses and reflector including over voltage protection up to 300 volts complete all as specified and directed.

Supply and fixing in repair 120 watt LED flood light fitting suitable for fixing on high mast light including all fixing arrangement high grade aluminium pressure die cast and toughened glass 110 lumen/watt and high spread using high quality lenses and reflector including over voltage protection up to 300 volts complete all as specified and directed.

Supply and fixing in repair 200 watt LED flood light fitting suitable for high mast light with and including all fixing arrangement high grade aluminium pressure die cast and toughend glass 110 lumen/watt and high spread using high quality lenses and reflector including over voltage protection up to 300 volts complete all as specified and directed.

Supply and fixing in repair 250 watt LED flood light fitting suitable for high mast light with and including all fixing arrangement high grade aluminium pressure die cast and toughend glass 110 lumen/watt and high spread using high quality lenses and reflector including over voltage protection up to 300 volts complete all as specified and directed.

S&F Weather Proof thermo plastic (Polysterene) Cable Junction box with 4 aluminium strip bar (25x3 mm) , having protection class IP-65 and of overall size 205mm x 255mm x 112mm having metric knockouts on the wall, having three phase cable connecter, duly fixed with the pole with clamp, GI bolts, nuts, washers and 2 Nos polymide weather proof cable glands of cable sealing range 10mm to 17mm (Complete with check nut) and including 1 No, 30 Amps 4 Way cable connector and 1 No, 6 Amps SP MCB complete all as specified and directed.

M & L Painting to existing LT Panels, angle iron support bracings, clamps etc. with two coats of aluminium paint superior quality of approved make on surfaces exposed to view external surface above PCC benching including preparation of old painted surfaces by scraping etc complete all as specified & directed.

Preparation of old painted surface of steel tubular poles of 9 mtr long including cross arms, cable protection pipe, bus bar box and painting of complete area with one coat of aluminium paint from 1.5 mtr above ground level to top of pole and making alternate strips/layers (30 cm wide) with white and blue synthetic enamel paint upto the 1.50 meter height from the ground level including writing the pole number in white letters on black background and cleaning/cutting the grass/bushes at a radius of 2 mtr surrounding the pole complete all as specified and directed.

S & F in repair cage for protection/housing LED lights made out of 4mm dia GI wire along with suitable size of angle iron frame fixed on foundation with necessary anchor fastner and nut bolts etc complete the size of cage should be 550x450x550 mm including one side with cage opening and locking arrangement and painted with black super enamel paint over a coat of red oxide primer etc complete all as specified and directed.

Supply and fixing in repair on pole/ wall PVC insulated heavy duty electric cable unarmoured with stranded aluminium conductor flat/round with including fixing arrangement complete all as specified and directed of the following sizes:-

2 core, 1.5 Sqmm

2 core, 2.5 Sqmm

2 core, 4 Sqmm

2 core, 10 Sqmm

M&L for repair of Street light panels and timer switch with replacement of unserviceable and burnt parts including all wiring and setting of timer switch with sun set and sunrise including all necessary accesories required for smooth functioning of panel and timer switch complete all as specified and directed.

M&L for repair of Swivel/search LED lights including motor repair/winding, circuit repair and repair of all un-serviceable parts of panel board of swivel light including all necessary accesories required for smooth functioning of Swivel/Search lights complete all as specified and directed.. Note : (i) The working height of watch tower is min 15 meter (ii) The contractor shall carry his own arrangement for carrying out the repair work (iii). Contractor quoted rate shall be deemed to be included above aspect. No extra charge shall be paid to contractor on this account.

Carryout day to day rectification of external electrifical complaints such as repair, reconnection and lightening of burnt/loose cable lead in MCCB/MCB of existing LT indoor/outdoor panels and bus bar with suitable size lug/thimbles, attending external electrical no supply complaints, jointing of traced out burnt cable with suitable size of jointing kit complete all as specified and directed. 'Note : (a) Replacement of major items shall be measured and paid under relevant items of this schedule. (b) Repairing upto 03 points at different electrical system without any other material will be considered as one job.

Material & labour for earthing with galvanised steel earth plate electrode 60cm x 60cm x 6.00mm thick burried directly in ground vertically at a depth not less than 2.25 metre below normal ground level with top edge of earth plate shall be at a depth not less than 1.5 metre below normal ground level, earth plate surrounded from all sides by 15 cm thick packed layer of charcoal dust and common salt filling in alternate layers and electrode connections by using galvanised iron strip of 25 x 4 mm as earthing lead (upto the body of the equipment) by means of bolts, nuts, check nuts and washers made of galvanised iron and thimbles and protected by medium 40 mm dia GI pipe connected to main switch board or main control board or equipment and GI pipe medium grade 20mm bore for watering and including funnel, wire mesh, 40mm thick RCC pit cover reinforced with 8mm dia TMT bar at 75 mm c/c both ways and lifting arrangement by providing handles (02 Nos) of 12mm dia MS round bar and PCC chamber pit with PCC (1:3:6) type C-1 (using 20mm graded stone aggregate) including excavation and earth work in soft/loose soil, returning, filling in with excavated soil and disposal of surplus spoil to a distance not exceeding 50m and shown in electrical Plate No 3 of SSR 2009 (Part-I) complete all as specified and directed.

Supply, erecting and fixing in repair in true vertical position, steel tubular swaged pole (410 SP-31) 09 meter long, complete with cast iron base plate, pole cap, mild steel bolts, nuts and screw including one coats of black bituminous paint externally (upto planting depth) and remaining exterior portion of pole shall be painted with two coats of aluminium paint over a coat of red oxide primer including preparetion of surface including painting blue(sky blue) strips of 30 cm width with synthetic enamel paint in alternate layers up to 1.5 mtr above the plinth block, writing letter or figures (Block Roman, Italic as Indian) with thick synthetic enamel paint of approved shade not exceeding 5 cm height including numbering of pole, painting of coping with two coat of cement based paint etc complete all as specified and directed. Note : Excavation, Earth work and PCC etc shall be measured and paid separately.

Excavating in trenches, n exc 1.5 m wide and exc 1.5 m in depth but n exc 3.0 m; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan errection of pole and getting out complete all as specified and directed.

M&L for cement concrete (1:3:6) type C2 using 40 mm gradded stone aggregate in foundations , filling and mass concrete etc complete all as specified and directed.

Demolition of PCC/Black bituminous road of any description and in any position not otherwise specially provided , etc complete all as specified and directed.

M&L for Cement Concrete (1:2:4) type B1 using 20 mm gradded stone aggregate for coping of poles, panel board and filling of road cutting etc complete all as specified and as directed.

M&L for rendering 15 mm thick 1:4 on fair faces of brick work or concrete surfaces finished even and smooth (without using extra cement) all as specified and directed

M & L Painting to existing light pillar with two coats of synthetic enamel paint of superior quality of approved make on surfaces exposed to view external surface above PCC benching including preparation of old painted surfaces by scraping etc complete all as specified & directed.

S & F in replacement of automatic street light switch using infrared sensor based nature switch, 25 KW equally distributed, 63 Amps, 3-Pole, Model- Swadeep-02 EC 25 Kw 3P for automatic switching of street lights based on LUX level of natural light. The sensor (Nature switch) along with suitable power contactor rating 63 Amps 3-Pole & 40 Amps 2-Pole, MCB SP 63 Amps-03 Nos and support terminals should be enclosed in pole/wall mountable enclosure made of rust proof, electric shock proof, termite proof and FR grade SMC junction box (Sintex make) confirming to IP-54. The contractor suitable to 3-Phase load of 25 kw, rating 63 Amps 3 Pole, MCB rating 63 Amps SP 03 Nos complete all as specified and directed. Make of nature sweitch- Kakatiya Energy systems Pvt Ltd. Hyderbad/Bjaj/Healer. Contractor: BCH/L&T/Schneider (as per IEC-60947-4-1/IS-13947-4-1), MCB : Hager/Schneider/Legrand/L&T, Circuit wiring polycab/RR Cable/Finolex/Havells.

Taking out lantern carriage of high mast light fitting with the help of integral power tools for repair and maintenance of unserviceable parts of any capacity and type including replacement of defective parts with new parts (items replaced shall be measured and paid seperately as "supply & fixing in repair") and made the fittings serviceable and re-fixing the lantern carriage at the original position complete all as specified and directed.

Supply and fixing in repair LED aviation obstruction light in red colour with 48 W capacity by lowering the lantern removing the old light and refixing the new one and raising the lantern in same position with coonected accesssories complete all as specified and directed.

Supply and fixing in repair stainless steel wire rope grade- AIAI 304, 7/19 construction of dia 6mm with breaking load capacity as per standard norms for highmast including removal of old wire rope and reconnection with proper connected accessories complete all as specified and directed.

S& F in repair Diamond chain B.S (I) 3/8 suitable for highmast motor roatation with connected accessories including taking down old sprocket and replaced with all fixing arrangment complete all as specified and directed.

S& F in repair sprocket 3/8 with Hub TH-14 heavy duty suitable for highmast motor and roatary part with connected accessories including taking down old sprocket and replaced with all fixing arrangment complete all as specified and directed.

Supply & fixing in Replacement of control panel outdoor type size 500x775x250 made of 14 SWG CRCA sheet with, IP-55, stand (made of 40x40x5 MS angle) mounted feeder piller with including aluminium busbar-4 nos 63 A internal wiring with 6 Sqmm copper wire for 32A circuit and 2.5 Sqmm for others. Complete forf autometic, timely Off/On for operating 6 to 10 Nos) 250 watt LED light fitting. (i) incoming 32 A 4pole MCB isolater- 01 no. Make- siemens/ABB/L&T(ii) 22A TP Contactor- 01 No.Make- siemens/ABB/L&T (iii) 9A contactor- 02 nos. Make- siemens/ABB/L&T(iv) single dial timer switch - 01 no. Make- L&T (v) push button- 02 No. (vi) Outlet Terminal- 02 nos. (vii) Toggle switch- 01 no (viii) Neutral link- 01 no (ix) Glass fuse- 01 no

M & L for repair of control panel of high mast light fitting complete with checking all electrical wiring and contactor including removing the old burnt control wiring from the panle and re-wiring with new PVC insulated copper cable single core multi strand with existing size and made the panel serviceable including testing after completion of work complete all as specified and directed.

Supply and fixing MCB FP 40 t0 63 Amps, 230 volts, 10 KA with enclosure in existing highmast panel complete all as specified and directed.

Supply and fixing MCB SPN 6 to 32 Amps, 230 volts, 10 KA with enclosure in existing highmast panel complete all as specified and directed.

Supply and fixing MCB SP 6 to 32 Amps, 230 volts, 10 KA with enclosure in existing highmast panel complete all as specified and directed.

Supply and fixing three phase motor of capacity 1 hp with reverse and forward moving ,6 pole single speed suitable for high mast complete all as specified and directed. Make- Havells/Crompton or equivalent

Repair/Maintenance winch/power tool double drum type/350 Kg suitable for lowering and raising the highmast lantern including dismantling of winch/power tool and refixing after repair with connected accessories complete all as specified and directed.

M&L for re-winding of existing highmast three phase motor of capacity upto 1.5 HP with reverse and forward moving ,6 pole single speed suitable for high mast including dismantling of motor and refixing after rewinding in same position with connected accessories complete all as specified and directed.

Repair & maintainenace three phase motor of capacity 1 HP with reverse and forward moving ,6 pole single speed suitable for high mast including dismantling of motor and refixing after repair/servicing in same position with connected accessories complete all as specified and directed.

Balaji Associate (BID ID -3362867)

GUPTA ENGINEERING WORKS (BID ID -3364440)

M/S GUPTA ENTERPRISES (BID ID -3364627)

FUTURE Inc. (BID ID -3370770)

TRIVENI ASSOCIATES (BID ID -3368194)

CHAHAR CONTRACTOR AND SUPPLIERS (BID ID -3371940)

MUKTA AND COMPANY (BID ID -3364737)