Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹2.2 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹2.3 L+₹11,958 (5.45%)Rejected-AOC | L2 | Rejected-AOC L2 |
Tender Value
₹2.1 L
EMD Value
₹4,300
Closing Date
28 Feb 2023, 5:00 pmClosed
XEN Electrical Division No. 1 Shimla
The Executive Engineer Electrical Division No-1 HPPWD Shimla-9
Providing Special Repair and Additional Alteration of E.I and installation of water lifting pump in O O Advocate General HP High Court Shimla 1
2023_PWD_69409_1
Electrical Division-I dated 16.02.2023
Open Tender
Electrical Works
Item Rate
90 days
SHIMLA
Please refer Tender documents.
7 documents required · 7 mandatory
₹350
E.E.Electrical Division No-I Shimla-9
₹4,300
18 Jun 2023
22 Feb 2023
1 Mar 2023
22 Feb 2023
28 Feb 2023
22 Feb 2023
Amount
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required.
Group C.
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.
2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire
2 X 4 sq. mm + 1 X 4 sq. mm earth wire
4 X 4 sq. mm + 2 X 4 sq. mm earth wire
Supplying and fixing metal box of 150mm X 75mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 3 pin 5/6 A socket outlet and 5/6 A piano type switch, connections, painting etc. as required.
Supplying and fixing metal box of 180mm X 100mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 & 15/16 A socket outlet and 15/16 A piano type switch, connections, painting etc. as required.
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
Single pole. Cat-A.
Supplying and fixing Higher Rating (80 to 125A) 240/415 volts, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
MCB DP 50/63 A 'C' curve
Supplying and fixing following way, CRCA sheet steel enclosure, IP 30 - Metal Door, RAL9003, powder coated, suitable for surface and flush mounting, with provision to mount MCB/Isolator/RCCB/RCBO and other modular devices, including interconnections, earthing etc. as required. (But without MCB/RCCB/Isolator etc.)
MCB Enclosure 2/3 or 4 way
Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
8 way , Double door
Providing and installation of Light duty, plastic body, ventilating fan of following sizes in the existing opening, by means of suitable rag-bolts/nuts, including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. as required complete in all respects to the satisfaction of the Engineer-in-Charge:- Make: Havell's, Bajaj, Crompton Greaves, Usha, Kahitan etc.
Ventilating Fan, Light duty, (Plastic body) 200 mm
Providing and installation of following type of LED batten with aluminium housing, anti glare polycarbonate diffuser and energy efficient constant current, integral electronic driver; suitable for input voltage: AC 220-240 V, 50/60Hz, complete with all accessories, including mounting clamps, connections, testing etc. as required: of Approved Make
LED Batten Light 20W
Providing and installation of following type of surface mounting square/round type LED panel Light with aluminium die cast housing in white finish with anti glare polycarbonate diffuser and seprated energy efficient constant current, non-integral, electronic driver; suitable for input voltage: AC 220-240 V, 50/60Hz, complete with all accessories, connections, testing etc. as required: of Approved Make
Square/round LED Panel Light 18/20W Surface
Square LED Panel Light 36W Surface
Providing & Laying of one number aluminium conductor, PVC insulated and PVC sheathed armoured/ XLPE power cable, 1.1 KV grade of following sizes on wall surface as required.
Armoured cable 10 sq. mm (twin core)
Supoplying and installation of energy saving and environmental friendly long life LED street light made up of pressure cast aluminium housing with high efficiency LED as lighting source and less embedded PC cover having bottom Opening seperate driver compartment with IP66 protection and impact resistance of IK08 suitable for input voltage AC 220-240 V, 50HZ, complete with all accesssories testing and commissioning etc. as required. Make: Havells,Twinkle , Syska, GE, Bajaj,jaquar , C&S, Panasonic or any other approved by Engineer-in-Charge..
LED street light .45 Watt
Supplying and fixing electrical switch board, having 3 No. of 5 amp. switches and socket on suitable size of metal box of 200mm X150 mm X 75 mm deep ( nominal size) on surface or in recess with suitable size phenolic laminated sheet cover in the front i/c providing and fixing 3 No. 5 pin 5/6 amp socket outlet and 5/6 amp piano type switch, connection, painting etc.as req. (For light plugs)
M/s Naresh Elecric Works
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_104725.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .