Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹6.6 L
EMD Value
₹19,400
Closing Date
13 Sept 2023, 9:58 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Directorate of Municipal Administration
jyoti
Erection of electric poles, drawing street light line and erection of high mast in city park of ward no.28 of Hubli division
DMA/2023-24/EL/WORK_INDENT2781
DMA/2023-24/EL/WORK_INDENT2781
Open
Electrical
Electronic Documents, First(One Cover)
DMA City Corporation Hubballi-Dharawada
6 documents required · 6 mandatory
₹500
₹19,400
5 Sept 2023
5 Sept 2023
11 Sept 2023
Erection of electric poles, drawing street light line and erection of high mast in city park of ward no.28 of Hubli division
RCC Poles RCC Pole - 9 Mtr Long, 145 Kg WL
Erection of RCC/PSCC Pole of 9 to 10 Mtr long in a pit of 1.8 Mtr depth Bescom,Elct, SR2021-22 [Pg.No 2 I.No2.02
Digging of Pit 1.8 Mtr depth for errection of 9 to 10 Mtr Long Steel/RCC/PSCC supports as per approved Drawing. in Bescom,Elct, SR2021-22 [Pg.No 1 I.No1.1.1 ordinary soil
Spiral Earth Electrodes as per standard technical specification as per BESCOM.
Bescom,Elct, SR2021-22 [Pg.No2 I.No2.16
LT 2 Pin Cross Arm - GI Bescom,Elct, SR2021-22 [Pg.No:1 I.No2.06]
Fixing of 2 Pin cross arm with Insulator and Braces fixing Bescom,Elct, SR2021-22 [Pg.No 2 I.No5.01
1.1 KV Pin Insulator Supplying and Fixing ….including all Hardware etc. complete as per the standard technical specification of Bescom,Elct, SR2021-22 [Pg.No:2 I.No6.03]
1.1 kV GI Pin for 1.1 kV Ceramic Shell Insulator Bescom,Elct, SR2021-22 [Pg.No2 I.No6.04
No. 8 Strain Insulator
Bescom,Elct, SR2021-15 [Pg.No:2 I.No6.06)]
Rabbit Conductor (6/3.35mm Al +1/3.35mm Steel). Rate:61515.00
Bescom,Elct, SR2021-22 [Pg.No3 I.No7.02]
Stringing of Conductor Stringing of conductor Squirrel, Weasel, binding of conductor on each insulator and dead ending on strain or disc/strain insulator by means of clamps. Bescom,Elct, SR2021-22 [Pg...
Guy Wire & GI Wire as per IS-217/10 SWG Guy Wire (7/3.251 mm Dia), Std Wt: 680 Kg/KM Bescom,Elct, SR2021-22 [Pg.No3 I.No8.01]
(Dwg No. BESCOM/GM/QS&S/07 Dtd 24.11.2018) Bescom, SR2021-22 [Pg.No2 I.No5.09
Turn Buckle (GI)
(Dwg No. BESCOM/GM/QS&S/07 Dtd 24.11.2018) Bescom, SR2021-22 [Pg.No:2 I.No5.11]
Anchor Rod using 12 mm rounds/Guy Rod - MS
(Dwg No. BESCOM/GM/QS&S/07 Dtd 24.11.2018) Bescom, SR2021-22 [Pg.No2 I.No5.12]
Digging of Pit for GUY SET Hard Soil SR 2021-22 BESCOM Part IV 11kv Labour page No 1. Item No 1.7.2
Jungle Clearing: 3 Mtr Corridor (1.5 Mtr on either side of line) As above for construction of new line including Trimming ofTrees, if Jungle/ Tree/ Plant/Shrubs Exists SR 2021-22 BESCOM Part IV 11kv L...
Pothead Epoxy Terminating Kit (Pothead) suitable for 1.1 kV, LTUG Cable BESCOM SR 2021-22 Page No 10 Item No 32.01
GI Pipe B - Class as per IS-1239 GI Pipe - 20 mm Dia
LT UG Cable 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3...
Laying of cable Existing Trench/GI pipe/Stoneware/RCC Hume pipe using wooden/Aluminium Rollers as directed by department staff. 2.5 to 25Sqmm. BESCOM SR 2021-22 Part IV 11kv Labour Sl No 230 page No 9...
Ordinary Soil Earth work Excavation for cable trenchof 0.5 to 0.75mtr width & depth up to 1mtr including trial pits,depositing on bank up to a lead of 50 mtr.Supplying & Displaying necessary danger bo...
Cement Concrete Road Cutting Cutting of Road surface for cable trenches and disposing of the excavated earth, as directed including Barricading, Danger Lighting then Refilling the Cable Trenches. Ceme...
HDPE/PLB Pipe 40/33 mm
12.5 High Mast Pole Fabrication, Supplying, Erection, Testing and Commissioning of . ms long Polygon high mast with Single/Multiple telescopic sections having, (minimum overlap distance of 1.5 times o...
MS Box For High Mast Fabricating supplying and mounting MS box made out …SWG suitable for floor / wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged ...
Angle Iron Supplying and fixing angle iron frame work fabricated out of M.S. angle iron. and M.S. flat … with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved...
Hylum plastic sheet Supplying and fixing hylum plastic sheet 3mm thick with necessary nitches for fixing switches, regulators etc., and fixing on existing wood or metal box using N.F. screws.
Timer switch Supplying and fixing Microprocessor based Electronic timer (without contactor, Din Mounting using necessary bolts, nuts and washers etc.,.) 3-120sec setting.
Contactor Switch Supply and fixing of 4pole power contactor with NO/NC contacts on existing wood/panel board using necessarybolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per I...
Fuse Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers. 32 A I.No 5.7.2
Control Box For Street lights Supply and Installation / Fixing / Provision of Outdoor typeThermoplastic Modular Panel enclosure with transparentPolycarbonate Lid, shock proof, IP65 (Weather Proof), ru...
Supplying and Fixing of.mm dia class A GI pipe bracket
upto 2 ms long bent at suitable angle and fixing to this
bracket 1x40/2x40 W fluorescent tube street light fitting of all
capacities to GI or GI ...
Using 32mm dia G.I.PipeG.I.Pipe PWD SR Page:45 Item no 13.2.1
MCB Switch Supplying & fixing miniature circuit breakers on existing
MCB distribution boards using necessary fixing materials
and 'C' Type curve, indicator ON/OFF, energy cross-3 with
Short circuit br...
MCB Switch 63 A 4 pole PWD SR Page13 Item no 5.20.4
Wodden Board Supply and fixing polished wood board made of not lessthan 15mm thick plank on both sides of not more than 2pieces and fixing the same to the wall using tapered invertedwooden plugs screw...
Earth work excavation by manual means for drains,canals, waste weir,
draft, approach channels, key trenches, foundation of bridges and
such simillar works in all kinds of soils , as per drawing and te...
Providing and laying in position plain cement concrete for levelling
course for all works in foundation. The granite/trap/basalt crushed
graded coarse aggregates and fine aggregates as per relevant IS...
Supplying, Fitting and Placing TMT Fe 500 & above
Reinforcement in Foundation / Substructure /
Superstructure complete as per Drawing and Technical
Specifications.
Providing and laying in position Reinforced cement concrete for all
Foundation works. The granite/trap/basalt crushed graded coarse
aggregates and fine aggregates as per relevant IS Codes machine
Centering, shuttering, formwork for foundation
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
2781.doc
Tender Document • 1.01 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .