Karnataka

AOC

Works

Roads

Improvement of road work in Maddur town limits road near Krishnaappa, Dinesh Babu house coconut market, APMC market compound, Malavalli Road to Christian cemetery, St. Annes School side and front up to the IB compound Leelavathi Layout, from the 2nd Cross Water Tank Road to Mariyappa School Road, from 3rd Cross up to 5th Cross main road, from 6th Cross 2nd Main Road to 3rd Main Road, 4th Cross Road, other roads, Maddur Layout 9th Cross Road, Park Road, and Megala Doddi roads.

Public Works Department

PWD Division Office Mandya | Karnataka

Amount: ₹3.3 CrCloses: 21 Jan 2026Closed

Timeline

Published1 Jan 2026
Closed21 Jan 2026
Awarded—

Bids

1 Bid21 Jan 2026

#	Company	Amount	Status
1	SRI CHOWDESHWARI CONCRETE INDIA PRIVATE LIMITED ₹3.4 Craccepted-aoc	₹3.4 Cr	accepted-aoc

Tender Value

₹3.3 Cr

EMD Value

₹4.9 L

Closing Date

21 Jan 2026, 10:00 pmClosed

Tender Inviting Authority

Office Inviting Bids

Public Works Department

Contact Person

Varalakshmi.V.R

Office Number

Work Description

Improvement of road work in Maddur town limits road near Krishnaappa, Dinesh Babu house coconut market, APMC market compound, Malavalli Road to Christian cemetery, St. Annes School side and front up to the IB compound Leelavathi Layout, from the 2nd Cross Water Tank Road to Mariyappa School Road, from 3rd Cross up to 5th Cross main road, from 6th Cross 2nd Main Road to 3rd Main Road, 4th Cross Road, other roads, Maddur Layout 9th Cross Road, Park Road, and Megala Doddi roads.

Tender Information

Tender ID

PWD/2025-26/RD/WORK_INDENT30019

Reference Number

PWD/2025-26/RD/WORK_INDENT30019

Tender Type

Open

Product Category

Roads

Form of Contract

Two Tender Document System(Two Cover)

Location

PWD Division Office Mandya

Source Website

Subscribe to view

Documents Required

7 documents required · 7 mandatory

Technical Bid

RequiredPWD Contractor Registration Certificate

RequiredTurn over Profit & Loss Statement certified by Registered Chartered Accountant with UDIN No

RequiredWork done certificate Experience in one similar type of work

RequiredMachinery/Equipment details

RequiredLine of credit / K-Form

RequiredOngoing work details

RequiredDetails of tenders already submitted

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of e-Procurement portal due to internet connectivity issues and technical glitches at bidders end

Bidder shall pay Contract Management Module processing fees of 0.025% of the contact value (Min Rs.500/- & Max Rs.7500/-) soon after contract has been issued to bidder

Conditional tenders will not be accepted

The tenderer shall bear all costs associated with the preparation and submission of his tender, and the employer will in no case be responsible and liable for those costs

The Tender processing fee shall not be refundable

Royalty on construction materials and other taxes will be deducted as per prevailing Govt orders

As per Karnataka state Government order LD/300/LET/2006 Bangalore dated 01.01.2007 and Government letter no PW/134/BMS/2007 dated 27.07.2007, a sum amounting to 1% of the bill amount will be deducted towards constructions labour welfare fund

All scanned documents to be uploaded shall be in original and the Executive Engineer reserves the right to verify the documents before approval

The employer reserves the rights to Reject or accept any or all the tenders without assigning any reasons

In the case of the death of the contractor after executing the agreement / commencement of the work, his legal heir, if is an eligible registered contractor and is willing can execute and compete the work at the accepted tender rates irrespective of the cost of the work

The successful Tenderer shall deliver to the Employer a Security deposit in the prescribed form in the favour of the Executive Engineer, PWD Division, Mandya, given below for an amount equivalent to 5% of the Contract price plus additional security for unbalanced tenders in accordance with the Conditions of Contract

Contractor should carryout additional test required to test the suitability of materials

All safety precautions, warning signs, night illumination, reflectors, deployment of security guards has to be ensured according to ENVIRONMENTAL MANAGEMENT SYSTEM (EMS ISO 14001:2015) & QUALITY MANAGEMENT SYSTEM (QMS ISO 9001:2015) Policies, so that no untoward incident happens on account of negligence or any project activity. Contractor should indemnify the client to that extent

Formation levels and other data furnished are bare minimum the contractor should make all efforts to validate and to get additional data if required at his own cost

Materials like steel, cement etc., required for the work shall be procured by the tenderer themselves and should get tested by the quality control authority before use on the work at their own cost

The contractors assessed available tender capacity will be calculated as per the clause 3.6 of STD tender document Attached

All the items in the tender include all lead, lifts, loading unloading, transportation, labour, hire charges of machinery curing for concrete works, cost and conveyance of all material and all other such incidental charges necessary for successful completion of works as per the detailed technical specification and direction of Engineer - in charge of this work

All precautions should be taken by the contractor so that there are no damages to such public/ private properties

Contractor should take all precautionary measures to avoid any damage to the utilities during excavation as well as utility shifting. To that extent the contractor should indemnify the client

Contractor should follow strictly the prevailing rules of labour act.

Further particulars, if any, required by the Contractor can be had from the office of the Executive Engineer, Public Works Department, Mandya Division, during office hours on all working days

Contractor should adhere to HSE (Health Safety Environment) policy applicable for similar projects. Contractor to that extent should submit HSE document defining all the procedure including the policies before execution of the project.

Contractor should take all precautions to ensure that no damage is caused to the existing structures which have been constructed by other agencies during project execution. If any damage is caused, it has to be rectified at his own risk and cost

One Lakh Rupees of the specified EMD should be paid in any one of the forms mentioned in Clause 13.1. Bank Guarantee/e-Bank Guarantee as per circular of Finance department GOK letter no:FD 5 EXP 12/2023 Dt:15.05.2023 must be given for the remaining amount in prescribed format. The copy of the Bank Guarantee must be scanned and submitted along with the Technical bid

The successful contractor should setup material testing laboratory at the work site before commencement of work. (For contracts of Rs. 1.00 Crore & above).

The difference in cost deposited by the lowest successful tenderer (for unbalanced) along with the performance security will be released to the contractor 30 days after the completion of defects liability period

All the uploaded documents in e-portal should be got verified at the Division office within 3 working days from the stipulated date of opening of Technical Bid by producing the original documents at the Division office, failing which the tender is liable for rejection. No separate communication will be made in this regard

Bankers Certificate for the stipulated amount as per clause 3.3 (b) should be submitted in the format as prescribed in the bid document (Section-3 Clause 1.1) only. Otherwise tender is liable for rejection

The contractor who participates in tenders for more than one work for which tenders are invited in this IFT, the tenderer must fulfill all the conditions and criteria cumulatively for the participated works

The intending contractors are requested to note that they should abide by the detailed instructions and conditions contained in the Standard Tender documents KW-4

Price escalation shall not be considered in the extended period of contract for which the contractor alone is responsible for delay as determined by the authority while granting the extension of time

Contractors should be registered as KPWD/CPWD Class II and Above Civil Contractor

Regarding Appealing aggrieved contractor may appeal to the prescribed (Appellant) Authority within 30 days as per KTTP and appeal should be trough eproc only as per Govt: Order No.pwd/572/CRN-2020 Bangalore Dt:09.10.2020. same will not be considered if appeal through Letters

The returns submitted to the Income Tax Department. Shall be uploaded and shall be produced at the time of verification of Original documents at Division office.

The time for completion of whole work is 6 Months (including rainy days).

All the originals of uploaded documents in e-portal should be produced within 7 working days from the date of opening of Technical Bid at the Division Office, failing which the tender is liable for rejection. No separate communication will be made in this regard, failing which action will be taken as per tender conditions and registration rules

The tenderer should maintain the executed works during the defective liability period for 2 years.

GST at 18Percent shall be paid to the tendered amount separately

GST shall not be paid in the extended period of contract for which the contractor alone is responsible for the delay as determined by the authority while granting the extension of time

Turn over and Profit and loss statement without UDIN Number will be rejected.

B-Value of existing commitment details should be submitted. Else the ongoing works available in the e-portal will be considered as a whole

The contractor shall maintain pothole free road during DLP, if potholes found the contractor should attend the issue within 24 hours as per the instructions of the Executive Engineer

Technical Criteria

General

Liquid assets and /or availability of credit facilities of no less than Rs. xxxxxx Lakhs (estimated cash flow for 3 months of peak construction period)

Total value of civl engineering works executed and payments received in the last five years (year-wise)

List of existing commitments and ongoing works

List of works for which tenders already submitted

Banker Details for reference

Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded

Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years

Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded

List of Financial Resources with Certificates

Past Experience

3.2 (b) Satisfactorily completed (at least 90% of the contract value), as prime contractor, at least one similar nature of work such as Improvements/Construction of roads of value not less than Rs.163.41 Lakhs

Work Done Certificate

3.2 (2020-21 to 2024-25) (c) Executed in any one year, the following minimum quantities of work 1. EWE/Embankment/Sub grade earthen : 666.00 Cum. 2. GSB : 751.00Cum, 3. W.M.M : 2502.00 Cum. 4. Asphalt (Including B.M/D.B.M/B.C/S.D.B.C/MSS) : 938.00 Cum. 5. RCC / PCC / DLC / PQC : 393.00 Cum. 6. Reinforcement steel : 16.76 Tonne.

Work Done Certificate

Capabilities of Vendor

3.3 - Each Tenderer should further demonstrate (a) Availability by owning and that can be deployed on hire / lease / owning the following key and critical machineries / equipments for this work (i) Machineries / equipments to be owned 1. Hot Mix Plant (40-60TPH Minimum capacity): 1 No. 2. Asphalt Paver Finisher: 1 No. 3. Soil Vibratory Compactor : 1 No. 4. Asphalt Vibratory Compactor : 1 No. 5. Tipper / HGV : 3 No.s. 6. Excavator: 1 No. 7. Motor Grader: 1 No. 8. Vehicle Mounted Bitumen Sprayer: 1 No. 9. Concrete mixer with hopper : 1 No. (ii)Machineries / equipments could be on Lease/Hire/Own 1. Tipper / HGV : 3 No.s 2. Excavator: 1 No. 3. Wet Mix Plant / Pug Mill : 1 No. 4. Concrete mixer with hopper : 1 No

Others -- Relevant documents as mentioned in the general condition

3.6 - Tenderers who meet the above minimum qualifying criteria, will only be qualified if their available tender capacity is more than the total tender value. The available tender capacity is calculated as under Assessed available tender capacity ( AxNx1.50 - B ) where A Maximum value of civil engineering works executed in any one year during the last five years (updated to 2025-26 price level) taking into account the completed as well as works in progress N Number of years prescribed for completion of the works for which Tenders are invited. (N 0.50) B Value, at 2025-26 price level, of existing commitments and on-going works to be completed. during the next 6 months

Others -- Work done & balance work to be done certificate issued by an officer not below rank of EE/equivalent

Financial Status

3.2 (a) Achieved in at least two financial years a minimum financial turnover (in all classes of Civil Engineering construction works only of Rs.653.62 Lakhs. (usually not less than two times the estimated annual payments under this contract). Turn over and Profit and loss statement With UDI No

Audited CA Certificate of Annual Turnover

3.3 - Each Tenderer should further demonstrate (b) Liquid assets and /or availability of credit facilities of not less than Rs.163.41 Lakhs (Credit lines / letter of credit / certificates from banks for meeting the fund requirement etc.)

Line of Credit

Work Locations

Fee & Financial Details

Tender Fee Amount

₹5,000

EMD Fee Amount

₹4.9 L

Important Dates

Last Activity

21 Jan 2026

Published

1 Jan 2026

Bid Opening

22 Jan 2026

Download Ends

20 Jan 2026

Pre-Bid Meeting

14 Jan 2026

BOQ Preview

•

Compacting Original Ground - Compacting original ground supporting embankment - Loosening, leveling and Compacting original ground supporting embankment to facilitate placement of first layer of emba...

•

Construction of Subgrade and Earthen Shoulders - Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting...

•

Granular Sub-Base - Plant Mix Method - Construction of Granular Sub-Base of required grading as per design mixing in a mechanical mix plant at OMC, carriage of mixed Material...

•

Wet Mix Macadam (Plant Mix Method) - Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC ...

•

Providing and constructing un-reinforced plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 150...

•

Prime Coat over WMM/WBM - Providing and applying primer coat with SS1 grade Bitumen Emulsion on prepared surface of granular base including cleaning of road surface and spraying ...

•

Bituminous Macadam Grading - II for traffic <20 MSA - Providing and laying Bituminous Macadam with 40/60 TPH capacity hot mix plant using crushed aggregates of specified grading prem...

•

Tack coat on Bituminous surface - Providing and applying tack coat with RS1 Bituminous Emulsion using emulsion pressure distributor at the rate of 0.20 kg/m2 on the prepared bituminous surface clean...

•

Semi Dense Bituminous Concrete - Providing and laying Semi Dense Bituminous Concrete with 40/60 TPH capacity hot mix plant batch type using crushed aggregates of specified grading pre...

•

Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface - Providing and laying of hot applied thermoplastic compound 2.5 mm thick including ref...

•

Mechanical Means -

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, stru...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...

•

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works fro...

•

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works fro...

•

Steel Fabrication

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...

•

Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting Each deposited layer by ramming after watering with a lea...

•

Providing and laying 100mm thick pre-cast cover slabs over Road side drains / utility ducts / Rain water harvesting pit of width not exceeding 1000 mm using M20 concrete reinforced with TMT bars Fe 55...

•

Repairs to Machinehole for different depths including removal of debris, levelling the brick masonry, construction of brick masonry upto Ground level, providing CC coping alround the MH cover, plaster...

•

Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...

•

Supply and delivery at site special moulded variety PVC bend as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments - 25 mm dia PVC BEND ---- All the items ...

•

Supply and delivery at site special moulded variety PVC bend as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments - 110 mm dia PVC BEND ---- All the items...

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

kw- 4-for-30019-2025-26.docx

Tender Document • 0.98 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Company

SRI CHOWDESHWARI CONCRETE INDIA PRIVATE LIMITED

₹3.4 Craccepted-aoc