WBPWDTE/EE/BED/NIQ_138/Q of 2021-22_3rd call Tender

Amount

(Group A) Distribution wiring in 1.1 KV grade 22/0.3 (1.5 sqmm) single core stranded 'FRLS ' PVC insulated & unsheathed copper wire(Finolex/ Havells/KEI / Mescab /Gloster/approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1.1 KV grade 1 x 22/0.3 (1.5 sqmm) single core stranded 'FRLS' PVC insulated & unsheathed copper wire (Finolex/ Havells/KEI / Mescab /Gloster/approved by EIC) as ECC, to 5A 3 pin flush type plug socket & Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board cum JB on wall incl. bakelite/Perspex (wall matching color) top cover 3 mm thick and incl. painting the MS box andmending good the damages to original finish. On Board

Supply & Fixing 240 V, 2 x 6A, plug socket with separate 6 A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 200 x 150 x 65 mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required

Supply & Fixing 240 V, 20A, plug socket with separate 20 APiano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F150 x 100 x 65mm MS (16SWG) switch board and bakelite /perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required

Supply & Fixing exhaust fan (Make -- EPC, Heavy duty) of following sizes after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of dia incl. Supply & Fixing louver shutter on wall with necy. bolts & nuts (6 mm dia x 62 mm long) as per GS 12" (30 cm)

S & F LED Power supply 300/ 400 W IP65 50/60 Hz frequency, 108 to 305 VAC driver power supply other electrical accessories in the existing prepared along with its necessary arrangement ( make Hisine/Migion/Cehosa/PWD appvd )

Repairing of existing glowsign board taken down from existing position by replacing the SMD LED within the letter as per requirement painting the complete structure with synthetic enemal paint of two coats & refixing on existing position.(approx 60sq ft)

S & F of non integral flood light luminanaries type BGENF 22 R or equivalent model (Pwd approved) with two nos 400W SV T Lamps and TS control gear boxes.

(Group-B) Supplying and fixing double-door SPN MCB Distribution Board with IP-42/43 protection, concealed on wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment Make-Legrand/ Siemens ) as to GS 2+12 way Enclosure

Supplying and fixing 240/415 V Isolator on din rail of existing DBs and necessary connection Make-Legrand / Siemens, as to GS. 240 V, 40A DP

Supplying and fixing 240/415V, MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection Make-Legrand/ Siemens as to GS. 6A - 32A SP MCB

Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FRLS' PVC insulated & unsheathed copper wire (approved make) partly in 20mm size PVC rigid conduit 'FR' (Precision make) [for ceiling portion only] and in 19mm bore, 3mm thick polythene pipe [for horizontal & vertical run embedded in wall], with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board on wall complete with 2 no. “Ph & N” copper bar with holes fixed on bakelite/hard rubber insulation over the welded chairs incl. bakelite/ Perspex top cover 3 mm thick and incl. 175x100x65 inspection box, making earthing attachment, painting the MS box and mending good the damages to original finish [only PVC Rigid Conduit on ceiling and remaining portion concealed] Average run 10 mtr

Supply & Fixing 240 V, 2 x 6A, plug socket with separate 6 A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 200 x 150 x 65 mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required

Supply & Fixing 240 V, 20A, plug socket with separate 20 APiano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F150 x 100 x 65mm MS (16SWG) switch board and bakelite /perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required

Supplying of following sizes Al. armoured PVC/XLPE (Havells/ Glostar /KEI/Polycab/ approved) as per direction of EIC 2 core 10 sqmm (For Security Light)

Laying of cable as below, after cutting floor/pavement/wall/ and making holes incl., embedding the cable at an average depth as below and mending good the damages to original finish incl. removing the rubbish From 2.5 sqmm to 35 sqmm at an average depth of 75 mm in floor/pavement/wall etc.

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below : 2 core 10 sqmm

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials 2 core 10 sqmm

Supplying & fixing medium gauge GI Pipe ( ISI-Medium) Protection with necessary fittings and jointing metarials as required 50 mm dia

Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes. as per G S 1.5 sq mm

Supply & Fixing of 70 W LED outdoor street light fitting ( Philips /Crompton LST 70 CDL AM make ) complete with all accessories to be S& F necy. length of Copper coductor and mending goods to wall incl. painting as per direction of E.I.C.

Supplying & Fixing of PVC water proof type Loop box (Make-Sintex) of size 8"X10" comprising of 4 way 100 Amp. Capacity brass stud/terminal make- AC /DC.,having hinged PVC top cover & 4 mm thick with rubber gasket lining,railway type mechanical locking arrangement,comprising of one 250V,15A kit-kat fuse unit,one NL on porcelain insulator etc. conceal in wall as per direction of EIC

Inter connection between loop box to fittings by 1.1KV 3X 1.5sqmm single core strandred 'FRLS' PVC insulated & unsheathed copper wire (Finolex/ Havells/KEI / Mescab /Gloster/approved by EIC) laying through PVC rigit Conduit (Make: Precision) incld.neccy. fittings as per direction of EIC.

Painting of Steel Tubular Pole of lengths and no. of coats of paint, as given below with ready mixed paint/primer of approved make, and brand incl. preparation of surface by sand paper/emery paper, cleaning etc. for receiving fresh coat of paint(Upto 9.0 mtr. long pole) 1st coat of aluminium paint over 1 coat of RO priming

2nd coat of aluminium paint over 1st coat

S & F LED Power supply 300/ 400 W IP65 50/60 Hz frequency, 108 to 305 VAC driver power supply other electrical accessories in the existing prepared along with its necessary arrangement ( make Hisine/Migion/Cehosa/PWD appvd )

Repairing of existing glowsign board taken down from existing position by replacing the SMD LED within the letter as per requirement painting the complete structure with synthetic enemal paint of two coats & refixing on existing position.(Approx. 96 sq ft)

S &F of 200W LED outdoor Flood light fitting (Make cat no.LFLN-120-CDL/60-M/Phillips/pwd approved make) compl. With all accessories to be fixed /Projected from the wall of the building incl.making holes to the building. S&F Suitable size MS angle frame fixed on parapit of building with nuts,bolts,washers etc and making neccy. connection with S&F neccy. length of Cu Conductor and mending goods to wall incld. painting with wall maching colour as per direction of EIC.

DURGAPUR POWER

TARUN KUMAR BARUA

M/S KUNDU CONSTRUCTION