Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹32.4 LAccepted-AOC N A | NA | NA | 121004 | L1 | Accepted-AOC being lowest | |
| 2 | L2₹34.4 L+₹50,481 (1.49%)Rejected-Finance RZB 96 B GF MAHAVIR VIHAR SECTOR 1 DWARKA NEW DELHI 110045 | NEW DELHI | SOUTH WEST DELHI | DELHI | 110045 | L2 | Rejected-Finance Not Being Lowest | |
| 3 | L3₹35.5 L+₹1.6 L (4.76%)Rejected-Finance | L3 | Rejected-Finance Not Being Lowest |
| Sl No | Description | Qty | Unit | MAA SANTOSHI ENTERPRISES L1 | SHRI JI ENTERPRISES L3 | SHAKYA ENTERPRISES L2 |
|---|---|---|---|---|---|---|
| 1.00Note : (a) Debris obtained from any dismantling or demolition shall be removed beyond MOD land and rates shall be considered inclusive in respective items quoted rates. (b) Contractor shall be liable to taking down and refixing of IGL Gas pipe line and meters if required during execution of work through IGL representative. (c) Contractor shall be liable to repair of electric cable/OFC cable/pipe line, etc. (any description) if damaged during execution of work (d ) As per requirment work may be executed at any given site, within the AoR of AGE B/R-III (W) Delhi Cantt-10. (e) Work shall be executed in multistorey bldgs (i.e. upto G+8 incl Mumty). Rate of scoffolding/safety arrangements are included in item rates. No extra amount shall be paid. (f) Attending day to day complaints of carpentary work (wooden/steel/aluminium) iron/aluminium mongery, palmet box, door springs, rolling shutters, venetion blinds etc requiring carpentry work and carrying out minor repairs such like tighting of screws/nails easening of joinery door spring etc in the area of Piru Vihar in the AOR of AGE B/R-III . complete all as specified and directed. Note : (i) The complains shall be attended & defects shall be rectified within 08 hrs i.e from 0900 hrs to 1700 hrs excluding sunday & gazetted holiday , commencing from date and time of notifying the complaint slips. Any item/material which are required to be replaced shall be supplied by the Department other than those mentioned in 'S&F' items. However labour charges for items of 'M&L' , 'S&F' and 'in repair' shall be included in respective item. (ii) In addition above Contractor shall arrange suitable T&P such as (screws/nails, plugs, grease,putty welding rods & portable welding machine drill machine & bid) etc including necessary form work/scaffolding and safety measure to make it functionalncl all as specified and directed. (iii) The above aspect shall be deemed to be included in the quoted rate of this item. (iv) Contractor or his rep will report daily at complaint cell for collection of complaints from the concerned JE's Incharge, in case after checking & attending the defects, if it is not possible to rectify the defects within 08 hrs, the facts shall be brought to the notice of Egr in charge by the contractor/ his rep immediately. The work shall be executed upto 9 storey bldg. | ||||||
| 2.00 | Taking down chowkats or frames including shutter (without taking off shutters from the frame) area n exc. 1.5 Sqm each.all as specified and directed. | 100 | Each | 25 ₹2,500 Lowest | 80 ₹8,000 | 49 ₹4,900 |
| 3.00 | All as per item above but exc 1.50 Sqm n.exc 4 Sqm.all as specified and directed. | 165 | Each | 25 ₹4,125 Lowest | 80 ₹13,200 | 49 ₹8,085 |
| 4.00 | Taking down shutters of any description exc 1 sqm and n exc 2 sqm each.all as specified and directed. | 20 | per leaf | 25 ₹500 Lowest | 100 ₹2,000 | 49 ₹980 |
| 5.00 | Taking down shutters of any description n exc 1 sqm each all as specified and directed. | 25 | per leaf | 25 ₹625 Lowest | 100 ₹2,500 | 49 ₹1,225 |
| 6.00 | Taking down shutters of any description exc 1 sqm and n exc 2 sqm each and refixing in same/other opening incl easing, adjusting etc all as specified and directed. | 30 | per leaf | 25 ₹750 Lowest | 90 ₹2,700 | 99 ₹2,970 |
| 7.00 | S&F 125x60 mm,pressed steel frames for door with double rebates including necessary fixings lugs,hinges lock strike plate,handlesetc complete as specified incl a coat of zinc chromate primer after pre treatment of the surface. | 680 | Rm | 565 ₹3,84,200 | 380 ₹2,58,400 | 299 ₹2,03,320 Lowest |
| 8.00 | S&F 105x60 mm,pressed steel frames for door with one or more rebates including necessary fixings lugs,hinges lock strike plate,handlesetc complete as specified incl a coat of zinc chromate primer after pre treatment of the surface all as specified and directed. | 350 | Rm | 490 ₹1,71,500 | 400 ₹1,40,000 | 299 ₹1,04,650 Lowest |
| 9.00 | M&L PCC 1:3:6 type C1 (40mm graded aggregate) for filling of pressed steel chowkats.all as specified and directed. | 7 | Cum | 2,200 ₹15,400 Lowest | 5,000 ₹35,000 | 2,699 ₹18,893 |
| 10.00 | S&F Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDMrubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge. | 160 | Kg | 690 ₹1,10,400 | 650 ₹1,04,000 | 399 ₹63,840 Lowest |
Tender Value
₹35 L
EMD Value
₹70,000
Closing Date
23 Jun 2026, 6:00 pmClosed
GE (West) Delhi Cantt-10
GE (West) Delhi Cantt-10
Comprehensive maint to joinery works at Md Accn Piru Vihar area of AGE B/R-III under GE (West) Delhi Cantt.
2026_MES_769500_1
GE/DW/TOKEN/38 OF 26-27
Open Tender
Civil Works
Item Rate
180 days
delhi
class D and category a(i)
9 documents required · 9 mandatory
₹500
GE (West) Delhi Cantt-10
₹70,000
Yes
1 Aug 2026
3 Jun 2026
25 Jun 2026
3 Jun 2026
23 Jun 2026
17 Jun 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 2 | Taking down chowkats or frames including shutter (without taking off shutters from the frame) area n exc. 1.5 Sqm each.all as specified and directed. | 100 | Each | - | - |
| 3 | All as per item above but exc 1.50 Sqm n.exc 4 Sqm.all as specified and directed. | 165 | Each | - | - |
| 4 | Taking down shutters of any description exc 1 sqm and n exc 2 sqm each.all as specified and directed. | 20 | per leaf | - | - |
| 5 | Taking down shutters of any description n exc 1 sqm each all as specified and directed. | 25 | per leaf | - | - |
| 6 | Taking down shutters of any description exc 1 sqm and n exc 2 sqm each and refixing in same/other opening incl easing, adjusting etc all as specified and directed. | 30 | per leaf | - | - |
| 7 | S&F 125x60 mm,pressed steel frames for door with double rebates including necessary fixings lugs,hinges lock strike plate,handlesetc complete as specified incl a coat of zinc chromate primer after pre treatment of the surface. | 680 | Rm | - | - |
| 8 | S&F 105x60 mm,pressed steel frames for door with one or more rebates including necessary fixings lugs,hinges lock strike plate,handlesetc complete as specified incl a coat of zinc chromate primer after pre treatment of the surface all as specified and directed. | 350 | Rm | - | - |
| 9 | M&L PCC 1:3:6 type C1 (40mm graded aggregate) for filling of pressed steel chowkats.all as specified and directed. | 7 | Cum | - | - |
| 10 | S&F Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDMrubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge. | 160 | Kg | - | - |
| 11 | S&F Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket/star lock etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-Charge. | 200 | kg | - | - |
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.66 MB
BOQ_861750.xls
BOQ • 1.99 MB
ps38.pdf
Tender Documents • 1.21 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .