Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹36.0 LAccepted-AOC | L1 | Accepted-AOC Lowest bid found in Order | |
| 2 | L2₹37.9 L+₹1.9 L (5.36%)Rejected-AOC | L2 | Rejected-AOC Other than Lowest bid | |
| 3 | L3₹38.6 L+₹2.6 L (7.28%)Rejected-AOC | L3 | Rejected-AOC Other than Lowest bid | |
| 4 | L4₹39.4 L+₹3.5 L (9.63%)Rejected-AOC | L4 | Rejected-AOC Other than Lowest bid | |
| 5 | L5₹42.2 L+₹6.2 L (17.2%)Rejected-AOC | L5 | Rejected-AOC Other than Lowest bid |
Tender Value
Refer Docs
EMD Value
₹86,600
Closing Date
3 Feb 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 874 EWS C/O 56 APO
GE 874 EWS C/O 56 APO
SPECIAL REPAIR TO BLDG NO T 330 AND EST 21 AT ZANGLI AND CERTAIN SANCTION WORKS
2023_MES_573580_1
GE 874/EWS-62/2022-23
Open Tender
Civil Works
Item Rate
180 days
Kupwara
As per NIT and tender documents
7 documents required · 7 mandatory
₹500
GE 874 EWS
₹86,600
Yes
17 Apr 2023
6 Jan 2023
4 Feb 2023
6 Jan 2023
3 Feb 2023
20 Jan 2023
6 Jan 2023 - 13 Jan 2023
Amount
B/R Portion
Dismantling floor, hearth or wall tiles including cement mortar bedding complete.
Demolition of cement concrete (unreinforced) in ground floors and paving not exceeding 15 cm thickness (below or above ground level) complete.
Demolition of brick/stone masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashler facing, dressed stonework and precast concrete articles.
M&L for brick work with sub class 'B' bricks straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:4 Complete all as specified and as directed.
M&L for Rendering 15mm thick on stone/brick masonry surfaces or other than fair faces in cement motar 1:4 (using WPC as per manufacturars instruction) finished even and smooth without using extra cement.
Supply only liquid water proofing compound.
Preparation of new plaster surface of walls including cornices plaster etc, and applying two coats of cement base paint over a coat of approved primer, complete as specified and directed.
M&L Rendering 10 mm thick on fair faces of brick work or concrete surfaces in Cement mortar 1:6 finished the surface even and smooth without using extra cement, complete all as specified.
Applying three coats of white wash including preparation of newly plastered/un plastered surfaces of wall complete all as specified.
M&L for cement concrete type D-2, 1:4:8 (40mm graded aggregate) as in 75 mm thick sub base for floor finieshes all as specified abd directed by Eng-in-Charge
M&L for cement concrete type B-0, 1:2:4 (12.5mm graded aggregate) as in 25 mm thick sub base for floor finieshes all as specified abd directed by Eng-in-Charge
M&L for Vitrified ceramic tiles dark coloured 600 x 600 mm 8-10mm thick as in flooring, set & jointed in neat cement slurry and pointed in white or colured cement to match over and incl 15mm thick screed bed in CM 1:6 etc complete all as specified and directed.
All as per item above but on vertical surface suck as skirting/daddo etc set and jointed in neat cement slurry and pointed in white or colour cement to match over 10mm thick in 1:4 cm backing coats etc complete all as specified and directed.
M&L for exterior out door designer tiles/Endura tiles of size 300 x 300 mm x 10 mm thick, in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match tiles, over and including 15 mm thick screed bed or bedding layer in cement mortar (1:6) complete all specified and directed.
M&L for exterior out door designer tiles/Endura tiles of size 300 x 300 mm x 10 mm thick, as in skirting/raiser etc, set and jointed in neat cement slurry and pointed in coloured cement to match tiles, over and including 10 mm thick screed bed or bedding layer in cement mortar (1:4) complete all specified and directed.
Dismantling two way trellis work (Jafri), including taking as under of battens in trellis (posts and rails measured separately) complete all as specified and directed.
Dismantling unframed timber scantlings 40 sq. cm and over in section, in any position complete all as specified and directed.
Dismantling unframed timber scantlings in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section complete all as specified and directed.
M & L second class soft wood clean swan 35mm x 10mm laths (fixed straight or diagonally) in two way trellis work with 50mm spaces in the clear, including 75mm x 50 mm fillet (notched to take ends of laths) all round and fixed complete
M & L for Second class clean sawn soft-wood in scantlings unframed timber scantlings in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section complete all as specified and directed.
All as per item above but except timber.
Refixing Second class clean sawn soft-wood in scantlings in repair to replace old and decayed timber (including piecing, scarfing, etc of old and new timber if required ) and removing defected portions to store in unframed timber scantlings in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section complete all as specified and directed.
M & L plain fillets.square, rectangular or triangular in section exc 13 Square Metre & n.exc 25 Square Metre, clean sawn, secured with nails or brads complete all as specified and directed.
M & L plain fillets.square, rectangular or triangular in section exc 6 Square Metre & n.exc 13 Square Metre, clean sawn, secured with nails or brads complete all as specified and directed.
M & L plain fillets.square, rectangular or triangular in section exc 3 Square Metre & n.exc 6 Square Metre, clean sawn, secured with nails or brads complete all as specified and directed.
Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings all as specified and directed by Eng-in-charge.
Fixing only plain or corrugated steel sheeting any gauge thickness with new hooks in roof covering.
Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified
Pre- painted galvalume aluminum zinc coating GI based plain sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified
Dismantling boarding, any description, fixed in any position with nails all as specified and directed by Eng-in-charge.
M & L 2nd class soft wood wall/ceiling paneling of good quality wood planed one side and edge tonged and grooved or rebated other side and dovetailed joints, chamfered both side fixed to frame work with secret nailed as in wall paneling 15 mm including cornice and beading as required and applying two coats of varnish over a filler coat of thin varnish after preparation of the surface, complete all as specified and directed. Note :- Frame work shall be measured & paid separately.
S & F repair aluminium panelled door single leaf with powder coated aluminium (minimum thickness of powder coating 50 micron) frame of section size 62.5mm x 37mm x 1.5mm thick, shutter with middle and bottom rail of aluminium section 112.5mm x 37mm x 1.5mm thick and stiles and top rails of aluminium section 83mm x 37mm x 1.5mm thick with suitable locking arrangement with lock (Make: Godrej / Link) 7 levers and self closing devices with rebates including joining cleats of suitable section for fixing and including provision of builders hardware fittings as required, door spring (Make: Sandhoo / Amar) and glazing with 5.5mm thick ordinary plain coloured glass (Make: Modi / Atul), including provision of EPDM rubber / neoprene gasket as required, including provision of necessary fittings, fixtures etc., fixed in repairs, complete all as specified and directed.
Aluminium sliding window with aluminium anodized frame of aluminium section 62.5mm x 37mm x 1.5mm thick with shutters having style and rails of aluminium section 47.62mm x 44.45mm x 1.5mm thick including joining cleats, glazing clips, rubber packing, aluminium snap beading, screws anodized akuminium fiitings such as hinges, tower bolts, handle etc., including 5.5 mm thick sheet glass, fixed in repairs, complete all as specified and directed.
ACP panel as in wall panelling or cladding 3 mm thick of required colour, fixed on mild steel framing or grid of specified spacing fixed on face of walls or coloumn by drilling hole with screw and joints of panels shall be sealed with silicon tape as per manufacturer Instructions, fixed in repairs, complete all as specified and directed.
Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.
Dismantling stone slabs of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar complete all as specified and directed.
S & F granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platfoRunning Metres and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. complete all as specified and directed.
Vitreous china counter top wash and basin, oval type, of size 560mm x 410mm with chromium plated waste coupling long shank type, PVC waste pipe 32 mm bore 600mm long, fixed in repairs, complete all as specified and directed.
Vitreous china one peice European type water closet of size 700mm x 370mm x 760mm and making necessary connection to drain or out going pipe fixed on floor, fixed in repairs, complete all as specified and directed.
Central hole basin mixer, 15mm bore, with popup waste, chromium plated, screwed down for galvanised iron pipes, fixed in repairs, complete all as specified and directed.
Wall mixture, 15mm bore, with telephonic shower arrangement chromium plated, screwed down for galvanised iron pipes, fixed in repairs, complete all as specified and directed.
Chromium plated brass shower rose 125 mm long, fancy type with swivel joints fixed to 15mm bore pipe, fixed in repairs, complete all as specified and directed.
S& F in repair chromium plated towel rack with lower hanger ,brass raling , including brass screw complete all as specified and directed.
Taking up or down 15mm steel tubing and connections, including cleaning for refixing or removal to store
M&L for galvanised steel tubes medium grade 15 mm dia fixed to wall or ceiling or laid under floor, complete with necessary fittings all as specified and directed.
S&F in repair 75 mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement concrete 1:2:4, type B-1 (using 20 mm graded crushed stone aggregate) complete all as specified and as directed.
M & L for 2nd class clean swan soft wood boarding 20 mm thick, supplied & fixed with nails in any situation (except flooring and skirting) complete all as specified and as directed.
M & L applying two coats of synthetic enamel paint on new wooden surfaces of any description over 10 cm width or girth over a coat of pink primer including preparation of surfaces complete.
M & L applying two coats of varnishing on old wooden surfaces of any description over 10 cm width or girth over a coat of sizing and oil staining including preparation of surfaces complete.
Taking down chowkats or frame with shutters (without taking off shutters from the frames) area not exceeding 1.5Square Metre each, complete all as specified.
Taking down chowkats or frames with shutters (without taking off shutters from the frame) area exceeding 1.5Square Metre and not exceeding 4Square Metre each, complete all as specified and directed.
Second class softwood (Sal) plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue, pinned at joint complete all as specified and directed.
Second class softwood 35mm thick Plain, framed,panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and directed.
Second class softwood, glazed and skelton shutter, 30mm thick, open rebated and prepared to receive glass, gauze etc, divided into square with plain, chamfered or rounded mitered and rebated sash bars, edges of framing plane, chamfered or rounded, fitted with cut and mitered bead for securing glass, gauze etc, size of member of shutters as specified in SSR Part -I, section 8, class 8.24(a) (Door shutter), supplied and fitted to chowkats all as specified and directed.
30mm thick second class softwood (sal) glazed and skelton shutters open rebated and prepared to receive glass, gauge etc with rebated sash bars, edges of framing plain, chamfered or rounded, fitted with cut mitered beads for securing glass etc, size of members of shutters as specified in SSR Part I Section 8 Clause 8.24 (b) (Window shutter) supplied and fitted to chowkats complete all as specified and directed.
Galvanised mild steel wire cloth 0.56 nominal dia of wire and average width of aparture 1.18mm and fixed with tinned tacks or galvanised wire staples, complete all as specified.
Two coat of synthetic enamel paint over a coat of pink primer including cleaning dusting of new or previously untreated wood/plywood base surfaces for wall, door, window, ventilator and ceiling, not otherwise described over 10cm width or girth, complete, all as specified and directed.
Mild steel butt hinges, medium weight, cold rolled,100mm long, complete all as specified.
Mild steel butt hinges, medium weight, cold rolled, 75mm long, complete all as specified.
Mild steel barrel tower bolt, stove enamelled black, with bright bolt of 200mm long, complete all as specified.
Mild steel barrel tower bolt, stove enamelled black, with bright bolt of 150mm long, complete all as specified.
Mild steel sliding door bolts, stove enameled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolts plate and two on staple plate, 300mm long, all as specified.
S&F Aluminium handle, cast type, anodised 150 mm long.
S&F Aluminium handle, cast type, anodised 125 mm long.
Sheet glass ordinary quality, 3mm thick, glazing with oil putty or wooden beads in squares not exceeding 0.50Square Metre in each pane, complete all as specified and as directed.
M&L for Preparation of old painted surfaces and applying one coat of synthetic enamel paint on wooden surfaces of any description not other wise described over 10 cm width or grith etc complete all as specifed and as directed.
M&L plywood grade BWR type BB, 9mm thick fixed with screw to timber frame work complete all as specified and as directed.
M&L Hardcore of gauge exc. 63mm, n exc 100mm deposited, spread and levelled in layers n exc. 100mm thick, watered and rammed to a true surface of broken stone or boulders.
20 to 25mm machine cut, kota stone slab, in single piece, in window cill, riser of steps, skirting, dado and pillar and similar work, laid over and including backing coat, in CM 1:4, 10 mm thick, jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing with beeswax polish complete all as specified and as directed
20 to 25mm machine cut, kota stone slab, in single piece, in window cill, riser of steps, skirting, dado and pillar and similar work, laid over and including backing coat, in CM 1:4, 10 mm thick, jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing with beeswax polish complete all as specified and as directed
Machine pressed precast concrete interlocking paver block with grey cement and no pigment any shape and size as approved by Eng-in-charge, confiRunning Metreing to IS 15658-2006 of 60mm thickness, M-35 Grade with grey cement and no pigment complete all as specified
Providing cement concrete Type B0 1:2:4 (12.5 mm graded aggregate) in roof kerbs (or cantilever beam), mud stops, rounded or chamfered on edges complete all as specified and directed.
Mild steel Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete drilled for fixing of steel sheeting or other covering. Doors etc. To be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (including of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed by Engr-in-charge.
75mm thick, plain cement concrete 1:3:6, type C-1 (using 20mm graded crushed stone aggregate) as in plinth protection etc., finishing surface even and smooth without using extra cement.
Excavation in trenches n.exc 1.5m deep & n.exc 1.5m wide and n. exc 10 Square Metre on plan, in soft/loose soil and getting out.
Plain cement concrete type D-2, 1:4:8 (using 40mm graded crushed stone aggregate) as in foundations, filling and mass concrete, complete all as specified and directed.
E/M Portion
Taking down carefully copper/ aluminium unserviceable/ perished point wiring (light, fan, socket or power complete including fixture and fittings such as switches, ceiling roses, pandents, regulators, sockets, light fittings,removing material from site for refixing or taking credit etc and making good disturbed surfaces of wall, floors, complete all as specifiecd and directed.
Point wiring for one light point/Ex/fan point controlled by one switch with 1.5 sqmm PVC FRLS insulated un-sheathed copper conductor single core multi strand cable and 1.5 sqmm PVC FRLS insulated un-sheathed copper conductor single core multi stranded cable (green color) as earth lead in and including cable 1100 volts grade including 25mm casing and capping (ISI marked) for one light/ fan point controlled by one switch including CI/MS sunk box of required size, & as directed by Engr in Charge including 3mm thick plastic laminated top sheet cover, including cutting chases to wall and making good the disturbed surfaces to match with the existing specification complete all as specified. Make : Finolex/Anchor/Polycab Note - Wiring will be as per SSR Part-I and Part II Spoecification and wire will be orignate in DB and end in lt end.
All as per item above but One socket outlet 5 pins 5 amps controlled by one switch on same board, complete as directed by engineer in charge.
All as per item above but wiring with 1.5 sqmm copper wire ( FRLS) and 1.5 sqmm earth wire for socket outlet 6 pin 5 amps on independent board complete as directed by engineer in charge.
All as per item above but wiring with 2.5 sqmm copper wire ( FRLS) and 1.5 sqmm earth wire for socket outlet 6 pin 15 amps on independent board complete as directed by engineer in charge.
M & L for modular white cover plate with frame 8 module complete all a specified.
M & L for modular white cover plate with frame 6 module complete all a specified.
M & L for modular white cover plate with frame 4 module complete all a specified.
M & L for modular white cover plate with frame 3 module complete all a specified.
M & L for modular white cover plate with frame 2 module complete all a specified.
Supply & fixing Switch piano type flush 6 Amp Single pole one way ( ISI Marked) complete all as specified and directed. Make : Havells/Anchor
Supply & Fixing Socket outlet 2 in1, 3 pin 5 Amps flush type complete all as specified and directed.Make : Havells/Anchor
S&F Switch socket combination 5 in 1, 5 and 15 Amp flush type universal controlled by one switch (ISI marked) complete all as specified and directed.
S&F modular switch one way 6 Amps 1 module type
S&F modular socket 6 Amp 2/3 pin combined 2 module type
S&F modular socket 6/16A-2/3 pin combined 3 module type
S&F Modular Bell push 6A 1 Module
S&F ceiling rose, PVC/poly carbonate, isolated body three terminal complete as directed and specified by engineer in charge. Make - Anchor/SSK/Cona Havells
M&L for sub main wiring with two single core 2.5 sqmm PVC insulated and unsheathed 1100 volts grade, stranded copper conductor (FRLS) ISI marked drawn into & including medium grade PVC conduit/ casing caping, with wooden or white coloured casing caping (as specified and directed) 25 mm dia with all fittings and accessories and one continuous run of 1.5 sqmm copper conductor PVC insulated (green colour) as earth wire fixed into PVC casing / conduit (not less than 25mm outer dia) with all fittings and accessories fixed conealed/ surface including taking down old unserviceable submain wiring and making good disturbe surface complete all as specified and directed.
M&L for sub main wiring with two single core 6 sqmm PVC insulated and unsheathed 1100 volts grade, stranded copper conductor (FRLS) ISI marked drawn into & including medium grade PVC conduit/ casing caping, with wooden or white coloured casing caping (as specified and directed) 25 mm dia with all fittings and accessories and one continuous run of 4 sqmm copper conductor PVC insulated (green colour) as earth wire fixed into PVC casing / conduit (not less than 25mm outer dia) with all fittings and accessories fixed conealed/ surface including taking down old unserviceable submain wiring and making good disturbe surface complete all as specified and directed.
S&F sheet metal enclosure for TPN DBs (double door type), when MCBs to be used single pole and neutral 12 way incl blanking plate as reqd with 200 amps rated busbar 240V complete all as specified and directed. Make : Legrand, Havells/HPL.
S&F sheet metal enclosure for SPN DBs (double door type), when MCBs to be used single pole and neutral 8 way incl blanking plate as reqd with 200 amps rated busbar 240V complete all as specified and directed. Make : Legrand, Havells/HPL.
Supply & Fixing RCBO, single pole and neutral (SPN) 30mA, 240V , 32 Amp all as specified and directed. Make- Havelles/MDS/Legrand.
S&F MCB's single pole 240 volts 6 to 32Amps 10 KA 'C' series, all as specified and as directed by Engr -in-Charge. Make : Leggrand/Havells/HPL.
MCB single pole & neutral 40 to 63 Amps 230 Volts'C' series, 10 KA complete all as specified and directed.Make: Havels /Legrand L&T,
Supply and Fixing Industrial Type Single Pole and Neutral Sheet metal enclosure with one Single pole MCB 10 - 20A two pin and earth plug and socket complete
S&F in replacement of MCCB 4 Pole, 415 V, with Adjustable thermal settings, 63 Amps with breaking capacity 16 KA all as specified and directed. Make: Havells/ Standard / L&T/ Legrand.
S&F in replacement LED light fitting 1x9W/1X10W bulk head luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size.
Supply and fixing in replacement LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.
Supply and fixing in replacement LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete.
Supply and fixing in replacement LED indoor wall picture light fitting metal Synthetic with high out put diffuser 2 feet, 7 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete.Make-Philips, ModelMuziris Model No-31402
Supply and fixing in replacement LED focus spot Bed lights fitting 1x 10W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.
Supply and fixing in replacement LED decorative wall lights fitting 1x 9W, 220V, Gold finish fixture with white glass diffuser sutable foe for 7.5/9 w LED Lamp, holder including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.Make Havells Ordering CodeLHFOAKD1TZ1D060
Supply and fixing in replacement LED Decorative wall fixture light fitting 1X 9 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete.Make -Havells
Supply and fixing in replacement round shape 12 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete.
Supply and fixing in replacement round shape 6 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete.
Taking down Exhaust fan/Geyser for refixing and complete of B/R repair work.refixing the same complete all as specified and as directed by Engineer-in-Charge.
Earthing complete with galvanized steel earth plate electrode 60cmx 60cmx6mm thick buried directly in ground (earth pit not less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.5m below normal ground level, connected to galvanized iron wire 4.0mm dia by means of bolts, nuts and washers of galvanized iron or steel, protected by GI light grade pipe 15mm bore including GI light grade water pipe 20mm dia with funnel all as shown in electric plate No. 03 of 2009 SSR Pt-I and testing on complete including earth work in any type of soil, PCC 1:2:4 type B-0 as in earth pit and cover 40mm thick reinforced with XPM (weight not less than 4.0Kg/Sqm) and frame of angle iron 25x25x3mm with lugs 2 Nos and with 6mm dia MS bar handle made to shape, common salt, charcoal and testing on completion, all as specified and directed.
Supply and fixing of Weather proof PVC flat twin core cable of size 10 sq mm complete all as specified and directed
S&F XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 35 sqmm 3.5 core complete all as directed. Make-Havells/Plaza/Paragaon
Taking down carefully split/Window 1.5/2 ton capacity AC any Make and complete servicing of of AC refilling of any required Gas and replacement of Unsv PCB and reinstall after complete bldg repair work complete all as directed
Supply and fixing of 7.5 KVA AIR-COOLED SILENT DG SET comprising of AIR-Cooled Diesel Engine model EA16 G1 (CPCB NORMS COMPLIANCE) developing 16 BHP @ 1500 RPM & 7.5 KVA KIRLOSKAR Green make Alternator rated at 1 Phase, 230 Volts, 50 Hz; 0.8 p.f. @ 1500 RPM both mounted, and aligned on a common MS base frame complete with MS Fuel Tank Integrated Control Panel, Residential Exhaust Silencer, AVM Pads fitted on base frame,1 No.12 Volts DC Battery KIRLOSKAR Battery Leads, 1st fill of Lube Oil, and other features like. Make:-KIRLOSKAR, COTTON GREAVES, MAHINDRA & MAHINDRA, TATA RUSTON, CUMMINS, ASHOKA LEYLAND
S&F electronic meters single phase temper proof LCD display with polycarbonate cover 230 V, 10- 60Amp, accuracy class-I 50Hz, conforming to IS 13779, IP-54, with parameters to show data, time, current reading, load, PF, voltage and KWH complete all as directed. Make:-Secure/HPL
S&F electronic meters three phase temper proof LCD display with polycarbonate cover 415 V, 10- 60Amp, accuracy class-I 50Hz, conforming to IS 13779, IP-54, with parameters to show data, time, current reading, load, PF, voltage and KWH complete all as directed. Make-Secure/HPL
S&F XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 25 sqmm 3.5 core complete all as directed. Make-Havells/Plaza/Paragaon
S&F XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 35 sqmm 3.5 core complete all as directed. Make-Havells/Plaza/Paragaon
S&F XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 50 sqmm 3.5 core complete all as directed. Make-Havells/Plaza/Paragaon
S&F PVC insulated, armoured, heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 16 sqmm 2 core complete all as directed. Make-Havells/Plaza/Paragaon
Excavation in trenches, n exc 1.5m wide and n exc 1.5m in depth, for cable, etc n exc 10 sq m on plan and n exc 1.5 m in depth and getting out.soft/disintigrated rock for cable and Pole.
Returning filling in including spreading , levelling, watering and well ramming in layers not exc 25cm.
Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5m above the starting point.
Supply and spreading of fine river sand and gentally Punning for laying of under ground cables.
Supply and laying subclass 'B' common burnt bricks, old size,designated 75, laid dry flat with width equal to length of brick & with gaps between the adjucent bricks n. exc 10mm as cover laid over the cable to give mechanical protection to under.
M&L for GI pipe ,light grade 40mm dia for road crossing of cable or for cable protection of cable above ground surface all as specified and directed.
M&L for GI pipe ,light grade 25mm dia for road crossing of cable or for cable protection of cable above ground surface all as specified and directed.
Supply and fixing in replacement of starter LT Meter Panel Board, Outdoor type of suitable size as per relevent IS, mounted on angle iron legs of size 40x40x5mm imbedded in PCC 1:2:4 block type B-2 (using 40 mm graded aggregates) , floor mounting, dust and vermin proof, factory made (CPRI approved), fabricated out of 2 mm thick CRCA sheet suitable for 3 Phase, 415 Volt, 50HZ AC Supply, busbar chamber with aluminum busbar of suitable amp rating for 3 Phase and 4 wire system duly insulated with heat shrinkable sleeve as per colour, supported on epoxy insulator 01 set, common earth bus of 25 mm x 4mm at bottom inside panel board with two earth terminal out side panel board, cable alley cable gland with independent plate at bottom and complete panel board painted with powder coating in grey colour all as specified & directed.
Supply and laying GI pipe galvanized, “Medium Grade”, including fittings 40 mm (1.5”) dia complete all as specified and directed.
Supply and laying GI pipe galvanized, “Medium Grade”, including fittings 25 mm (1”) dia complete all as specified and directed.
Supply and fixing Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed for 40 mm dia pipe complete all as specified and directed.
Supply and fixing Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed for 25 mm dia pipe complete all as specified and directed.
S&F Rotational moulded polyethylene water storage tanks 2000 ltrs (cylindrical vertical with closed top) hoisted and fixed in position all as specified.
S&F Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 25mm-455gms) complete all as specified and directed.
S&F Tank Nipple suitable for HDPE water tank. (Minimum weight 25mm- 65gms) complete all as specified and directed.
M&L for construction of valve pit of size 50 cmX 50 cmX 50 cm internal dimensions brick construction including all excavation and earth work in hard/loose soil returning filling in disposal of surplus spoil to a distance not exceeding 50 m and depositing where directed PCC in foundation of the mix (1:4:8) type D2 (using 40 mm graded crushed aggregate) brick masonry in cement mortor (1:4) rendering 12 mm thick in cement mortor (1:4) internally finished even and fair and pointing flush externally as the work proceeding in the same mortor mild steel 50X6 mm frame MS sheet cover of 2 mm thick with handle and locking arrangment painting all the exposed MS work with two coat of synthetic enamel paint of the make as approved all the MS embedded in PCC with two caots of black bituminous paint complete all as specified.
M/S SAJAA CONSTRUCTION COMAPNY
G N T CONSTRUCTION CO
POPULARHARDWARESTORE
M/S GHULAM AHMAD BABA
M/S MUNEER AHMAD WANI CONSTRUCTIONS
M/S AB AHAD RATHER
Bidder Name
M/S AB AHAD RATHER
M/S SAJAA CONSTRUCTION COMAPNY
G N T CONSTRUCTION CO
POPULARHARDWARESTORE
M/S GHULAM AHMAD BABA
M/S MUNEER AHMAD WANI CONSTRUCTIONS
M/S AKHLAQ ENTERPRISES
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.PDF
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .