Construction of residence houses in Civil Hospital at Narwana, Jind. (Pdg. E.I. only) Recall

Amount

(c) Moulded case Circuit breakers. 31.12 (c) Supply and erection of moulded case circuit breakers on wall or on existing pedestal including bonding to earth and necessary connections. 31.12 c (i) 15 amp.to 60 amp. 415 V ,10 KA 3-phase.

31.12 c (ii) 100 amp.to 220 amp.415 V,10 KA 3-phase.

Distrubution board with plug and socket. 31.15 Supply and erection of sheet steel enclosure 2 pole / 3 pole with earth plug and socket suitable for incorporating single pole / triple pole MCB on wall / on existing pedestal complete with necessary connections etc. 31.15 (ii) S.P.N. enclosure for single pole MCB 20 amp.

(L) Miniature Circuit Breaker and Isolator. 31.17 Supply and erection of miniature circuit breaker / isolator 240 /415 V in the existing distribution board including making necessary connections. (a) Miniature circuit breakers of 9 KA breaking capacity. 31.17a) (ii) SP MCB 6 amp. to 32 amp.

31.17(a) (ii) SPN MCB 6 amp. To 32 amp.

31.17(a) (ii) TP MCB 6 amp. to 32 amp.

31.17(a) (ii) TPN MCB 6 amp. to 32 amp.

31.17(a) (iii) TP MCB 40 amp. to 63 amp.

31.17(a) (iii) TPN MCB 40 amp. to 63 amp.

(M) Supply and erection of Fittings and Accessories. 31.18 (vii) Call bell 220 / 230 volts A.C. bakelite with double coil.

31.18 (ix) (b) Bell push flush type ( without flexible wire ) in existing sheet.

31.18 (xi) Bakelite angle / straight button holder large size.

31.18 (xxvi) Supply and erection of hexagonal M.S. box 1.60 mm thick having each side 8 cms , 7.5 cms deep top covered with M.S. lid by means of screws including 10 mm dia 30 cm long mild steel rod made into suitable suspension hook and erected in RCC slab for erection of fan , the bottom covered with 3 mm thick bakelite sheet with suitable holes , painting etc. complete with all labour and material required to complete the job.

(O) Erection and carriage of fans.. 31.20 (i) Erection of ceiling fan complete with necessary earthing of fan and regulator including carriage from local railway station /goods transport /PWD store to the site of work.

31.20 (iii) Erection of exhaust fan complete with necessary earthing of fan and regulator including carriage from local railway station /goods transport /PWD store to he site of work.

31.20 (v) Making suitable hole in the wall upto 450 mm sweep exhaust fan including finishing the same and fixing of wire mesh duly fixed with Deodar wood frame of section 40 mm x 25 mm thick.

31.20 (vi) Pdg. and fixing of required size of deodar wood frame of section 50 mm x 32 mm for fixing exhaust fan upto 450 mm sweep.

(P) Pipe Laying. 31.21 Supply and erection of pipe for wiring purposes including bends inspection boxes etc. where necessary and painting as required. 31.21 (xxi) Heavy gauge welded conduit pipe 20 mm dia 1.60 mm thickness flushed.

31.21 (xxii) Heavy gauge welded conduit pipe 25 mm dia 1.60 mm thickness flushed.

31.21 (xxiii) Heavy guage welded conduit pipe 32 mm dia 1.60 mm thickness flushed.

31.22 (Q) Earthing. 31.22(iii) Earthing with GI earth plate 600 mm x 600 mm x 6 mm thick including accessories and providing masonry enclosures with cover plate having locking arrangement and watering pipe etc. ( but without charcoal or coke and salt ) complete as equired.

31.22(v) Extra for charcoal or coke and salt for G.I. Plate or copper plate earth electrode.

31.22(xii) Pdg. and laying earth connections from earth electrode with 4.00 mm dia G.I. wire in 15 mm dia G.I. pipe from earth electrode as required .

31.22(xvi) Pdg. and fixing 4.00 mm dia G.I.wire on surface or in recess for loop earthing as required.

31.26 Supply and erection of under ground cable ,loose in existing pipe or trenches complete with necessary connections . 31.26 (iv) Ard. 10 Sq. mm 2 Core Cable .

31.26 (xI) Ard. 16 Sq. mm 4 Core Cable .

31.26 (xIi) Ard. 25 Sq. mm 4 Core Cable .

(X) Miscellaneous . 31.35 (vii) Supply and erection of 75 mm x75 mm x 60 mm deep M.S.box for telephone and inter-communication system including 2 pin 5 amp. socket including cost of bakelite sheet .

31.36 PVC insulated wiring in recessed conduit wiring in 1.5 sqmm PVC insulated copper conductor cable in 1.6 mm thick conduit pipe. (I) Fan Point - (b) Medium Point.

(b) Long Point.

(II) Light Point- (a) Short Point.

(b) Medium Point.

(c) Long Point.

31.36 (III) Twin control light point with 2 way, 5 amp. single pole switch. (c) Long point.

(VI) Call bell point including M.S. Box of size 180 mm x 100 mm x 60 mm deep for call bell. (c) Long Point.

(VII) 3-Pin 5 Amp. plug point including earthing the 3rd Pin etc. (a) Short point

(b) Medium Point.

(c) Long Point.

(VIII) 3-Pin 15 Amp. plug point with 4 Sqmm PVC insulated copper conductor cable including earthing the 3rd Pin etc. (c) Long Point.

31.40 Supply & erection of PVC unsheathed copper conductor cbale single core 1100 volts grdae in pipe of suitable size excluding cost and erection of pipe. 31.40 (i) Cable size 1.5 Sqmm ( 3/0.81 mm ).

31.40 (iii) Cable size 4 Sqmm ( 7/0.85 mm ).

31.40 (iv) Size 6 sqmm ( 7/1.05 )

31.40 (v) Size 10 sqmm ( 7/1.35 )

31.41 Supply & erection of double door sheet steel enclosure distribution board suitable for MCBs and ELCBs etc. recessed in wall including bonding to earth with all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-in-charge of the work. 31.41 (ii) 8-way , SP&N ( Horizontal)

31.41 (v) 4-way , TP&N ( Horizontal) (8+12)

31.44 Supply and erection of PVC pipe ISI marked ( Medium ) recessed in wal / ceiling etc. including the cost of PVC bends , inspection boxes , iron hooks and cement concrete etc. complete in all respect upto the entire satisfaction of Engineer-in-charge of work. 31.44 (ii) 25 mm dia.

31.66 Supply & fixing of rotary handle for on/off operation of existing MCCB in the LT panel including fixing the same in position with all labour and material requied to complete the job in all respect. (i) Rotary handle upto 125 Amp. MCCB

31.67 Supply and erection of mark double walled corrugated (DWC) HDPE pipe laid 1Mtr. Below ground level including diging and refilling of earth including cost of sutiable size socket/cuppler for HDPE pipe including the cost of labour and material required to complete the job in all respect upto the entire satisfaction of Engineer-in-Charge of the work. (i) HDPE pipe 63/50 mm outer dia/inner dia.

M.R. items NS-1 Supply & erection of M.S. Box made of 16 Gauge of size d 8" x 10" x 4" covered with3 mm thick bakelite sheet white colour of ISI Mark fixed by means of 4 Nos. brass screws with cost of 1 No. 15 Amp. multi socket of ISI Mark and 15 Amp. switch and 3 Nos. 5 Amp. multi-socket with 5 Amp. switches of ISI Mark including fixing the M.S. Box in wall with cost of cement sand mixture including painting of M.S. Box and to complete the job in all respect upto the entire satisfaction of Engineer-in-charge of the work. (Based on HSR)

NS-2 S/E of sheet steel enclosure distribution board ( Havell's / Standard make ) G Frame 4 Poles recessed in floor / wall / or pedestal suitable for MCCB's including bonding to earth with all labour and material required to complete the job in all respect upto the entire satisfaction of Engineer-in-charge of the work.

NS-3 Supply & erection of double door (Indo Asian / Havells / standard make) sheet steel enclosure distribution board (Suitable for MCCB as incomer and MCB for out going circuit but with out cost of MCCB / MCB etc. The distribution board duly recessed in wall / surface mounting necessary connections with all labour & material required to complete the job in all respect up to entire satisfaction of Engineer-in-charge of the work. i) 4 way double door D.B.

NS-4 Supply, erection, testing & commissioning of hut type outdoor double door panel, panel board made out of 14 gauge mild steel sheet with 75 mm x 40 mm x 6 mm channel iron base frame painting with light Grey epoxy paint, suitable for operation on 3 Phase 4 wires, 415- V. 50-Hz A.C. supply with overall size of panel 1700 mm x 2100 mm x 450 mm deep. The panel should be fixed 300 mm above C.C.Block & legs are embedded in C.C. Block of size 1900 x 650 x 250 mm above ground level duly plastered with 12 mm thick 1:4 cement plaster having a base of size 1850 x 850 x 250 mm below ground level. The panel shall be complete in all respect upto the entire satisfaction of Engineer-in-charge of work ( but excluding cost of MCCBs including the cost of internal wiring with PVC copper cable, protection fuses and all other material required to complete the job in all respect. i) 1700 mm x 1650 mm x 450 mm