PROVN OF GYPSUM BOARD FALSE CEILING AND PVC INSULATED PANELS FALSE CEILING WITH LIGHT ARRANGEMENT FOR VQAW OFFICE AT THIRD FLOOR CQAEE MAIN BLDG REAR WING PROVN OF 48 X KITCHEN SINK AND QTY 48 X PLATE RACKS IN GOVT MD ACCN OF 24 MARATHA LIGHT INF AT

Amount

M&L for false ceiling of plain gypsum board 12mm thick including frame made out of MSGI BPS grade angle 24mmx24mmx0.35, ‘T’ section 24mmx25mmx0.30mm and main runner ‘T’ section 24mmx38mmx0.43 complete with angle fixed to wall with rawl plug 100mm long of maximum 600mm c/c, hanging with 2.50/3.00 mm dia GI wire suspenders fixed to ceiling with 80mm long rawl plug providing 1 No per Sqm complete with painting two coats of oil bound distemper over one coat of primer and preparation of surface complete all as specified and directed by the Engr-in-charge

M&L for 10mm thick PVC insulated panels 600 x 600mm with EPS stuck to 1mm printed PVC sheet suitable placed in and including flase ceiling grid made GI frame work for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges fo 20 and 30 mm and web 27 mm fixed to surrounding wall using nylon sleeves and screw at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended form soffit at approx. 900 mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55 mm fixed to the intermediate channel with connecting clips across the intermediate channel with connecting clips across the intermediate channel at 457 mm centre ot centre. Hangers 6 mm dia. GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI. Flat 40x3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long complete all as specified.

S&F POP decorative cornice 100mm size of approved design and pattern fixing along wall and ceiling junction complete all as specified.

S&F sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including cantilever brackets, CP waste coupling and PVC waste pipe overall size of sink 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S & F 15 mm bore tubes, medium grade, galvanised, with all fitting & fixed complete to walls & ceiling or laid in floors, complete all as specified and directed.

Supply & fixed 15mm bore fancy type long body bib taps, cast copper alloy, with capstan heads,chromium plated , screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

Taking down and fixing only old serviceable 15mm dia bore fancy type long body, received from site eith fixture fitting as per requirement complete all specified.

Cutting chases, pinning in brick walls, making good to facing where required and pointing in cement mortar (1:3) and making good, cutting n.exc 10cm girth , all as specified and directed.

S&F plate rack made of stainless steel 1mm thick and overall size 750mm x 600mm x 250mm securing with nails or screw in wall of any description complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding/complete and removing rubbish off the premises complete all as specified and directed.

M&L glazed ceramic tiles (350 x 250 x 7mm or 450 x 300 x 7mm) colour tiles on walls etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the work over 10 mm thick rendering in CM 1:4, complete all as specified and directed.

Demolition of Stone slabs and tiles of any description or thickness laided bedded and pointed in cement mortar in floors, aprons etc.

M&L for granite slab 200mm thcik granite slab machine cut in laid over cement sceed and jointed with grey cement slurry and ponted with white color cement with admixture of pigment to match the shade of granite stone including cutting and polishing completed including screed bed 15mm thick in 1:4.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations.

M&L machine cut cudappa stone slab 20-25mm thick over cement screed base laid or without and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

Taking down the switch shocket board including switch piano flush type single pole and switch pole and switch shocket combination 3 Pin 16 Amp flush type reflexing the same at same place carefully after wall tilling making good the disturbed area complete all as specified and directed by Ebgr-in-Charge

M & L for rough excavation n exc 1.5 cm deep and getting out soft and loose soil.

Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface

Demolition of cement concrete un reinforced in ground floors and pavings n.exc 15 cm thick below or above ground level.

Demolition of precast cement concrete block/ stone masonry built in cement mortar including all quoins, arches, pillars etc

M&L Cement concrete type D2 1:4:8 as in foundation filling and mass concrete complete all as specified and directed.

M&L for 20mm thick Granite (of any type) tiles machine cut, in skirting/ dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete fixed over and including backing coat of 10mm thickin CM 1:4 complete all as specified

M & L for 60mm thick M-40 coloured glossy finished interlocking tiles/ blocks any shape and size, jointed & pointed in neat cement slurry with pigment to match the shade of tile etc complete all as specified and as directed.

M&L fo sand filling under floors or in foundation including watering and consolidation.

M&L Cement concrete Type C2 1:3:6 (40mm graded aggregate) in surface channels and drains complete all as specified

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc

M & L Pre-cast cement concrete type C1 1:3:6 block masonry with solid blocks, exc. 10 cm in width and setting in mortar 1:4, complete all as specified

Providing cement concrete 1:2:4 type B0 as in copings, filleting etc.

M & L for rendering 15 mm thick on fair faces of block masonry surfaces in cement plaster 1:4 complete all as specified and directed

M & L for PCC 1:3:6 type C1 (uisng 20mm graded aggregate) 75 mm thick as in Plinth, Path, hardstanding floor with fair finish surface with out using extra cement complete all as specified.

M&L Chequred Cement concrete coloured tiles 30 cm x 30 cm x 20 mm thick, glossy finished set jointed and pointed in neat cement slurry in floors, and cut and polished with grey cement and pigments laid over 15mm thick screed in CM 1:6 complete all as specified and as directed.

M&L for two coats of cement base paint on newly and old plastered surfaces of walls including preperation of new surfaces complete all as specified

M & L Virtiified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matc including 15 mm thick screed bed in CM 1:6 complete all as specified.

S&F stainless steel grade 304 railing in stair case 16 gauge top and 20 gauge support bars, 50mm dia top and 2mm dia support and 3mm thck, including welding, embnedding and ploishing in joints all as specified and directed please.

Taking down carefully copper/aluminium point wiring (light, Fan, socket, Geyser or power) complete (fittings such as switches, ceiling roses, pendants, regulators, light fitting etc, removing materials to store for keeping in safe custody for credit (credit for above items should be made as per conditon of material separately) and making good distrubed surfaces of wall/floor/ceiling etc complete all as directed

M&L for point wiring complete with 1.5 Sqmm single core FRLSH PVC insulated unsheathed cable 1100 V grade multi stranded copper conductor as per IS 694 (1990) drawn through non metallic rigid PVC conduit and accessories in walls/ceilings with 1.5 Sqmm dia multistranded copper cable as earth continuity conductor connected to common earth dolly, including pressed steel terminal boxes of suitable thickness wire, for house modular socket , bell with modular plate switch/regulators etc all as specified and directed for following:- Cable make: Polycab /Finolex/ RR

(a) One fan/light point controlled by one switch

(b) One switch socket outlet 5 Amps on independent board

(c) One socket outlet 5 Amps on the same board

(d) Bell /buzzer point controlled by one bell push.

All as per item No 36 here-in-before but wiring with 2.5 sqmm single core multi stranded copper condcutor 1100 V grade PVC insulated but unsheathed single core for 16 Amps power point on independent board and 2.5 sqmm cable as earthwire.

Taking down old submain wiring M&L for sub main wiring but using two single core multistranded PVC insulated copper conductor FRLSH Cable of size 2.5 sqmm 1100 volt grade drawn into PVC Conduit concealed in wall of suitable size including 2.5 sqmm PVC multi standard copper conductor FRLSH cable in green colour for continious earthing including chislling/cutting of wall, floor, making hole through wall & making good disturbed surfaces of wall/floor/ceiling to match with existing surface including taking down old unserviceable/burnt wiring of any type or size complete all as directed by Engr-in-Charge.

All as per item No 38 but of Cable size 4 sqmm 1100 volt grade drawn into PVC Conduit complete all as specified and directed

All as per item No 38 but of Cable size 6 sqmm 1100 volt grade drawn into PVC Conduit complete all as specified and directed

Supply and fix in repairs Bell push 6 Amp, Modular type,1 module, 240volt AC complete all as specified and directed.

Supply and fix in repair electric bell Ding Dong, AC 230 volts complete all as specified and directed.

Supply and fix in repair modular switch 1 way 6A 1 module complete all as specified and directed.

Supply and fix in repair modular socket 6A 2/3 pin combined 2 module complete all as specified and directed.

Supply and fix in repair modular socket 16A 2/3 pin combined 2 module complete all as specified and directed.

Supply and fix in repair modular switch 16A 2/3 pin combined 1 module complete all as specified and directed.

Supply and fix in repair ceiling rose surface bakelite with three terminals complete including taking down rusted metal box and necessary platering work and finish with existing wall paint complete all as specified and directed.

S & F sheet metal enclosures in repair for double door distribution board factory made duly painted 8 way SPN, 240 v with 200 amps rated bus bar, concealed in wall suitable for fixing MCB /Isolators complete all as specified. Make:L & T/ Legrand or equivalent make NOTE:- The rates are inclusive of civil work involved for fixing the DB.

S & F sheet metal enclosures in repair with socket plug top and MCB 20 amp double pole factory made duly painted 240 v, concealed in wall suitable for fixing geyser /AC complete all as specified. Make:L & T/ Legrand or equivalent make NOTE:- The rates are inclusive of civil work involved for fixing the DB.

Supply and fixing miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 AMP, 240V, 10 KA 'B' curve in the MCB DB complete with connection testing and commissioning.

All as per tem no 50 but SPN 32 Amps .

Taking down old unserviceable fitting and S & F wall mounted extruded aluminium housing high quality indoor batten LED tube 22 watt colour temperature 6500 K (4feet long) lumen 2000 -3000, PF> 0.95, THD less 10% diffused connecting with three core flexible copper wire from connected to ceiling rose/angle holder as per existing site requirement as directed by Engr-in-charge. Make : Havells/wipro/Halonix.

Taking down old unserviceable fitting and S & F Recess/ surface mounting LED flat panel light fitting 36 watt, Inverter LED 2 x 2 panel with battery back up as recommended by the OEM with efficient LEDs lumen 2000 -3000, PF> 0.95, HD less 10% including necessary eletric connection with PVC insulated multistranded copper cable of size 1.5 sqmm 3 core from ceiling rose to fitting terminal complete all as specified and directed by Engr-in- charge.

Taking down old unserviceable ceiling fan depositing it to MES store and Supply and fixing ceiling fans complete with blades, down rods, electronic regulator including remote control and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE, Five star rated with brushless direct current motor (BLDC) complete all as specified and directed.

Supply and fix Wall mounting fan of capacity 400mm sweep, double string, copper wounded, AC single Phase. 230V heavy duty with air delivery 65CMM, silent operation complete all as specified and directed.

Taking down unserviceable earthing, M & L for earthing complete in repairs with galvansihed steel earth plate electrode 600 mm x 600 mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of plate not less than 1.5 m below normal ground level connected to 4.0 mm dia galvansihed earth lead wire by means of nuts bolts check nuts and GI washers including PCC pit in PCC 1:2:4 type B-1 RCC cover 20 mm dia (medium grade) GI watering pipe with funnel wire mesh and protection pipe of GI of suitbale size upto 7.5 mtr length including charcoal black cotton soil as required at site to achieve the earthing result and common salt & charcoal including, excavation earth work etc in any type of starta complete all as shown in electrical plate No 3 as specified, GI wire suitable size and length for continuity earth wire from test point to main distribution Board and all as directed. Note: Rate for achieving required depth by compressor machine if required is deemed included in item unit rate.

S.R.M.K Enterprises (BID ID -3254104)

ShreHari Civil Enginneering and Contractors (BID ID -3259296)

M/S SANDEEP CONSTRUCTION COMPANY (BID ID -3259579)

shree ram enterprises (BID ID -3253518)