CA NO CWE/PAT/T-48/2022-23 PROVISION OF SPECIAL REPAIR FOR CONVERSION OF CHARPOY NEWAR TO PLY TOP FOR NABHA SANGRUR AND PATIALA MIL STN UNDER GE SOUTH PATIALA AND GE NORTH PATIALA

Amount

Removing of old nylon newer from GI Charpoy, tightening of all its parts such as loose check nut, elbow, long rails, short rail and legs etc including replacement of defective / worn out elbow / check nuts, complete, all as specified and as directed. Supply only new check nuts / elbows shall be measured and paid seperately.

Supply only new GI elbow 32 mm (ISI marked) medium grade, complete, all as specified and as directed.

Supply only check nut 32mm dia, (ISI Marked) medium grade of best quality, complete, all as specified and as directed.

Removing old unserviceable long rails from GI Charpoy and Supply and fixing new long rail of length 1950mm made out of 32mm dia GI pipe medium grade (ISI Marked) including threading on both sides, complete, all as specified and as directed.

Making out short rails obtained from broken long rails from Srl item 04 above, threading both sides and fixing to the charpoy GI pipe complete, all as specified and as directed.

Removing old unserviceable short rails from GI Charpoy and Supply and fixing new short rail of length 900mm made out of 32mm dia GI pipe medium grade (ISI Marked) including threading on both sides, complete, all as specified and as directed. Note : This item shall only be executed where old long rails have been found broken / damaged in such a way that requisite length of short rail can not be obtained from old long rails. Cutting schedule shall be prepared and technically checked before releasing payment through RAR / final bill.

Making out legs obtained from broken GI pipe from Srl item 04 and 06 above including one side threading and fixing to the charpoy GI pipe complete, all as specified and as directed.

Removing old unserviceable legs from GI Charpoy and Supply and fixing new leg of length 440 mm made out of 32mm dia GI pipe medium grade (ISI Marked) including threading on one side, complete, all as specified and as directed. Note : This item shall only be executed where old long/short rails have been found broken / damaged in such a way that requisite length of leg can not be obtained from old long/short rails. Cutting schedule shall be prepared and technically checked before releasing payment through RAR / final bill.

Supply and fixing with proper welding work, mild steel flat iron stiffner of size 900mm x 40mm x 5mm, duly grinded at sharp edges. The stiffener shall be painted with two coats of synthetic enamel black paint over a coat of red oxide primer complete, all as specified and as directed.

Supply and fixing 12mm thick plywood top of size 1980mm x 900mm commercial, BWR grade, ISI marked, fixed with 10 Nos mild steel nuts and bolts 6mm dia with washers, after drilling to charpoy GI pipe complete, all as specified and as directed. Note : (a) Plywood to be procured from authorised dealer in one lot and test certificate to be produced before incorporation in the work. (b) GE will carryout verification of voucher as per policy in vogue before starting of work. (c) Independent Test report will be done in the Zonal Lab or any NABL approved lab as directed by the GE without any extra cost to the Deptt.

Supply and Fixing Each of MS Clamp for FMN Set welded to pipe of each leg and size of clamp shall be as per drawing. Clamps shall be plugged with 3mm thick MS sheet. Clamps shall be painted with black paint after welding works complete all as specified and directed

Supply and fixing 3mm thick mild steel plate cut to size 40mm dia fixed at the bottom of leg by proper welding, as per sample approved by GE complete, all as specified and as directed.

Arneja Builders

M/s Harmans

ASHOKA FURNITURES

CITIZEN FURNITURE INDUSTRIES