Improvement work of the junction at Kohinoor Tiraha Located on Moradabad Farrukhabad Road SH-43

Dismantling sundries brick work including stacking of dismantled materials as directed by the Engineer-in-charge with in a distance of 60 metre (200 feet). As per Sor Si. No. 691 Chp No. 17. Excluding Cost of GST.

Dismantling reinforced cement concrete of reinforced brick work including stacking or materials as directed by the Engineer -in-charge with in a distance of 60 metre (200 feet) As per Sor Si. No. 694 Chp No. 17 Excluding Cost of GST.

Excavation in foundaton in ordinary soil (Loam, clay or sand) including lift up to 1.50 M and lead up to 30 M and including filling watering and ramming of excavated earth in to the trenches or in to the space between the building and the side of foundation trenches.(as per schedule item no.-251) Excluding Cost of GST.

Precast C.C. Kerb stone M - 25 (including carriage). As per DSR No.-8686 Excluding Cost of GST.

Construction of granular sub-base by providing coarse graded material Grading-I spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401. As per Morth Technical Specification Excluding Cost of GST.

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density all Complete as per MORTH Technical Specification. Excluding Cost of GST.

Providing and applying primer coat with bitumen emulsion (SS-2) grade bitumen emulsion on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70 kg/sqm using mechanical means as per MORTH Technical Specification Clause 502 Excluding Cost of GST.

Providing and applying tack coat with bitumen VG-10 using pressure distributor at the rate of 0.25 kg per sqm on the prepared bituminous/ granular surface cleaned with mechanical broom as per MORTH Technical Specification Clause. Excluding Cost of GST.

Providing and applying tack coat with bitumen VG-10 using pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous/ granular surface cleaned with mechanical broom as per MORTH Technical Specification Clause. Excluding Cost of GST.

Providing and laying dense graded bituminous macadam (G-I) with higher capacity batch type HMP using crushed aggregates of specified grading, premixed with bituminous binder @ 4.0 per cent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 505 (A) complete in all respects. Excluding Cost of GST.

Providing and laying bituminous concrete with 100-120 TPH hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of grading-II (13mm nominal size), premixed with bituminous binder VG-30 @ 5.40 per cent of mix and filler, transporting the hot mix to work site, laying with a paver finisher to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 509 complete in all respects. Excluding Cost of GST.

Supply & fixing of 100 mm thick Precast cement concrete I -Shap interlocking paver block a with top layer of minimum 8 mm thickness having plan dimension 200x (160+120 mm) of O.P. cement Smooth high glass finish. Skit resistant manufactured from rubber mould through vibro comprision machanism. The compressive strength of concretc paver block shall not be less than 30mpa (M-30) & weight 5 kg per nos of comporming is IS 15658-2006 with a 4 cm thick layer of local sand including cost of material, labour T&P etc. required for proper completion of the work as directed by Engineer-in-Charge as per SOR adi Item No. 5 Excluding Cost of GST.

Laying Reinforced cement concrete pipe NP3/prestressed concrete pipe for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets . Excluding Cost of GST.

Plastering with cement moratar 1:3 (Cement : Coarse Sand) on brick work as per Technical Specification (As per MoRTH specification clause No. 1300 & 2200). Excluding Cost of GST.

Cement concrete with 4 cm gauge approved stone ballast coarse sand and cement in proportion of 8:4:1 including supply of all material , labour and T&P etc. required for proper completion of work. As per SI No. 281 ) Excluding Cost of GST.

R.C.C. work with cement, approved coarse sand and 2 cm gauge stone grit in proportion 1:1½:3 in slab excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 BWGGI binding wire and including necessary centering and shuttering etc. and supply of all materials labour and T&P etc complete (SL No. 284 A) Excluding Cost of GST.

Providing @ Laying Precast R.C.C. Median as per approved pattern & design setting in position with cement mortar 1:3(1 Cement:3 Coarse sand) including the cost of Centering & shurtering but excluding the cost of reinforcement steel all complete as per D.S.R. item no. 1:1.5:3 (1 cement :1.5 Coarse sand: 3 20mm Nominal Size Stone aggregrate). Excluding Cost of GST.

M.S. (Tor steel or plain) in plain work such as R.C.C. of R.B. work including binding for proper shape and including supply of steel and its wastage bending hooks and authorised overlapping shall be measured. (SL. No. 504) Excluding Cost of GST.

Mild steel or iron work of small size and sections such as holding down bolts. Hold fast, gratings, grill etc. (when not included in an over all rates) wrought to requried form,including supply of steel bolts, nuts and wastage etc and fixing. As per SOR Item No. 502(c) Excluding Cost of GST.

Applying prime coat over new steel and other metal surface after paint including preparing the surface by thoroughly cleaning oil grease dirt and other foreign matter and scoured with wire brushes fine steel/wood scrappers sand paparing and knotting including coat of all and supply of all material labour and T&P etc required for proper completion of the work (As per SOR. No. 1(A) Chapter 15) Excluding Cost of GST.

Painting two coats on Previously painted old/New surface with paint of superior quality over priming coat (but excluding cost of priming coat) on wood or steel and other metal surface with superior synthetic enamel paint of standard make brushing to give an even shade, including cost of all and supply of all materials, labour and T&P ete required for proper completion of work with superior quality (As per SI Chapter 15 New Item 3 (iii)) (on divider) Excluding Cost of GST.

Providing wall putty on old surface with approval quality material of Berger/J.K./Birla or Similar make 2 coates (As per SOR. No. 13) Chapter 15) Excluding Cost of GST.

Chequered precast cement concrete tiles 22 mm thick in footpath & courtyard jointed with neat cement slurry mised with pigment to match the shade of tiles including rubbing and cleaning etc. Complete on20 mm thick bed of cement mortar 1:4 (1 cement : 4 coarse sand) all complete. As per DSR No. 11.19.1 (On top of Divider) Light shade pigment using white cement Excluding Excluding Cost of GST.