VIII.11001/Engr/MW/2025-26/05

Amount

Demolishing cement concrete manually means inlcuding disposal of materials within 50 meters lead as per direction of Engineer in Charge

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 20 mm nominal size stone aggregate.

Providing and laying vitrified tiles in different sizes with water absorption less than 0.08% and confirming to IS : 15622 of approved make in all clours and shade laid on 20 mm thick cement mortar 1:4 jointing with grey cement slurry @ 3.3 etc complete.

Providing and applying white cement based putty of average thickness1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth for repair only on damaged portion before applying distempering

Distempering with 1st Quality acryclic distemper having VOC content less than 50 grams / litre of approved brand and manufacture to give an even shade Old work (one or more coats.) including removing white or colour wash by sand papering and preparing the surface smooth including repair to scratches.

Finishing wall with Acryclic Smooth exterior paint of required Shade Old work on existing cement paint surface.

Dismantling wooden Plywood Ceiling including stacking of serviceable materials and disposal of unserviceable materials within 50 metres lead.

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, 12.5 mm thick tapered edge gypsum moisture resistant plain board

Dismantling taking out doors, window and cleareastory windows shutter including chowkhats, architrave, holdfasts etc complete and stacking within 50 meters lead

Providing and fixing double glazed in aluminium windows, ventilators and partitions etc with 6 mm thick clear float glass both side having 12 air gap, including providing EPDM gasket, perforate aluminum psacers etc. as per Engineer direction.

Providing and fixing 35 mm thick factory made laminated lumber door shutter confirming to IS 14616 and fixing with butt hinges of required wize with necessary screws all complete as per directions of Engineer In Charge.

Providing Corrugated G.S Sheet roofing including vertical/curved surface fixed with polymer J Or L hooks , blots and nuts 8 mm dia with bitumen and G. limpet washers or G.ifiled with white lead, including a coat of approved paint on overlapping of sheets complete pitch in horizontal /vertical or curved surfaces 0.63 mm thick with zinc coating not less than 275 gm/m2.

Providing wood work in frames of post sawn and fixed in position with necessary stainless steel screws Kiln seasoned and chemically treated holock wood.

Providing and fixing medium density PVC wall panelling Pre-laminated one side decorative lamination and other side balancing laminationincluding providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized iron , with necessary fixing arrangement and screws etc. complete 12 mm thick (External Panelling )

Providing and fixing PVC edge binding tape of approved quality for wall panelling including necessaryfittings on binding etc.

12 mm thick fire retardant plywood conforming to IS: 5509

Decorative plywood 4 mm

Stainless steel screws 50 mm,Brass screws 50 mm,GI Screws of gauge 10, length 25 mm for fixing cement fibre board to C section

Providing & fixing 150 mm x 80 mm dia funnel x 350 mm long made out of 1.00 mm thick GI Sheet fixed with rain water gutter with 40 m lap joint/ welded/ riveted etc complete.

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes

Painting with synthetic enamel paint of approved and manufacture of required colour to give an even shade. One or more coats on old work.

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC concealed, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required. Group A

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. 2 x 1.5 sq. mm

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required . 2 x 2.5 sq. mm

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required . 2 x 4.00 sq. mm

Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required. 5/6 amp switch.

Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required 3 pin 5/6 A socket outlet

Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required 3 pin 15/16 A socket outlet

Supplying and fixing brass batten/ angle holder including connection etc. as required.

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole

Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 AMP

Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 63 AMP

Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For vertical run)

Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required

Dismantling of ceiling /Light/fan/socket Point and painting the same with with one or more coats of spray painting with synthetic enamel paint of approved brand and manufacture to give an even shade, including cleaning of surface with detergent and replacing the damaged rubber reel, nuts and bolts with washers and safety pins, reinstalling the same as required.

M/S ANSARI ENTERPRISES (BID ID -3232662)

M/S MD FAREED (BID ID -3233588)