Construction of 4 Seater and 6 Seater Toilet at Ganesh Maidan Kadma Kadma Bazar Uliyan Road Kadma Dhatkidih Road Kadma Sonari Road River Meet Road Sonari ............... Gudiya Maidan Birsanagar Nildih Golchakkar Telco Under JNACJamshedpur

Amount

Dismantling pucca brick or lime work including stacking serviceable materials in countable stacks within 15M. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I.(BCD-5.10.1)

Dismantling RCC work including stacking serviceable materials in countable stacks within 15M. lead and disposal of unserviceable materials with all leads all complete as per direction of E/l.(BCD-5.10.3)

Dismantling plain cement or lime concrete work including stacking serviceable materials in countable stacks within 15M. lead and disposal of unserviceable materials with all leads all complete as per direction of E/l.(BCD-5.10.2)

Earthwork in excavation in foundation trenches in hard soil (vide classification of soil item-A) and disposal of excavated earth as obtained to a distance upto 50 M. including all lifts, levelling, ramming the foudation trenches, removing roots of trees, shrubs all complete as per approved design, building specification and direction of E/l.(BCD-5.1.1 + 5.1.2)

Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including' cost of all materials, labour, royalty and taxes all complete as per building specification and direction of E/l (Mode of measurement complacted volume).(BCD-5.1.10)

Providing designation 75 B one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/l.(BCD-5.6.3)

Providing and laying in position cement concrete of specified grade - All work up to plinth level : PCC(1:2:4) (1 cement : 2 coarse sand (zone-lll) :4 gradde stone aggregate 20 mm nominal size) (BCD-5.3.1.2)

Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers.and cantilevers.(BCD-5.3.17.5)

providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up plinth level. 1:1.5.3 (1 cement :1.5 coarse sand (zone-lll): 3 graded stone aggregate 20mmnominal size) (BCD-5.3.9.1)

Centering and shuttering including strutting, propping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts.(BCD-5.3.17.6)

Reinforced cement concrete work in walls (any thickness), including attached pillasters, buttresses, plinth and string courses, fillets, columns, pillars, piers , abutments, posts and struts etc. above plinth level up to floor five level , excluding costo of centering, shuttering , finishing and reinforcement: 1:1:5:3 (1 cement :1.5 coarse sand(zone-lll) :3 graded stone aggregate 20mm nomimal size) (BCD-5.3.10)

Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform.(BCD-5.3.17.3)

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15 degree landing, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral stair cases above plinth level up to floor five level , excluding the cost of centering , shuttering, finishing and reinforcement, with 1:1:5:3 (1 cement :1.5 coarse sand (zone-lll) : 3 graded stone aggregate 20 mm nominal size ) (BCD-5.3.11)

Providing Tor steel reinforcement of 10mm. ,12mm & 16mm dia. bars as per approved design and drawing excluding carriage of M.S. bars to work site , cutting, bending and binding with annealed wire with cost of wire, removal of rust placing the rods in position all complete as per building specification and direction of E/l. (a) 12mm (TMT,Coil Fe 500) (BCD-5.5.5. (b))

Providing designation 75 B brick work in C.M. (1:6) in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth, curing, taxes and royalty all complete as per building specification and direction of E/l.(BCD-5.2.6)

Providing and laying damp- proof course 50mm thick with cement concrete 1:2:4 (1 cement :2 coarse sand (zone-lll) :4 grade stone aggregate 20mm nominal size).(BCD-5.3.5)

Providing designation 75 B brick work in C.M.(1:6) in superstructure with approved quality of clean coarse sand of F.M. 2 to2.5 including providing 10 mm thick mortar joints cost of screening materials , scafolding , raking out joints to 15mm depth curing, taxes and royalty all complete as per building specification and direction of E/l. (BCD-5.2.14)

Providing 50 mm thick precast R.C.C.M - 150 with nominal mix of (1:2:4) in jali with approved quality of stone chips of 12mm and down well graded and clean coarse sand of F.M 2.5 to 3 with 1.6 mm thick M.S. wire as per approved design and drawing and placing the same in position true to plumb and level with 6mm dia M.S rods placed at regular intervals both horizontally and vertically as required and properly grouted with cement mortar ( 1 :3 ) including cost of curing, scaffolding and finishing all complete as per building specifications and direction or E/l.(BCD-5.3.21.1)

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters : 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws (DSR 9.21.2)

Providing 12mm thick water proof cement plaster (1:3) with clean coarse sand of F.M. 1.5with 5% cico or any other approved water proofing compound including taxes and royalty all complete as per building specification and direction of E/l.(BCD-5.7.14)

Providing 6mm thick cement plaster (1:4) in ceiling with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/l.(BCD-5.7.6)

Providing and laying Double Charge Vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete. size of tile 600x600 mm (BCD-5.6.28)

Providing and laying 6mm precast white glazed tiles in walls over 12mm cement mortar (1:3) and jointed with grey cement slurry flush pointed with white cement including rubbing, polishing and cost of curing, taxes and royalty all complete as per building specification and direciton of E/l. With commercial grade colour 15x15 cm tiles.(CBD-5.6.23.4)

Providing and laying 15 mm - 23 mm thick Kotah Stone tiles in risers of steps, skirting and pillars of approved size, texture and colour laid over 12mm thick cement mortar (1:3) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing to granolithic finish with approved quality of carborandum stone including cost of curing, taxes and royalty all complete as per building specification and direction of E/I. (BCD-5.6.20)

Providing 12mm cement plaster (1:4) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/l. Providing 1.5mm cement punning including curing, carriage of water with all leads and lifts as per building specification and direction of E/l.(BCD-5.7.2+ 5.7.11)

Providing 12mm cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/l.(BCD-5.7.3)

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.(DSR 2021 13.80)

Finishing walls with Acrylic Smooth exterior paint of required shade. (i) New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) (DSR 2021 13.46.1)

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade (DSR-2021 13.98)

Supplying, fitting and fixing 20 guage G.C.I, sheet gate fitted on MS Angle frame of size 60x60x6 mm including cost of fabrication , providing necessary locking arrangement with haskal and domny duly fixed in P.C.C. (1:2:4) blocks of required size, applying a priming red lead paint over steel work, taxes all complete as per drawing specification and direction of E/l.(BCD-5.5.29)

Supplying, fitting and fixing M.S. grill gate with M.S. grills made of 20x6mm M.S. flats or 16mm square bars fitted on 25x25x6mm M.S Angle frame including cost of fabrication , providing necessary locking arrangement with haskal and domny duly fixed in P.C.C. (1:2:4) blocks of required size, applying a priming red lead paint over steel work, taxes all complete as per drawing specification and direction of E/l. (where steel is not supplied by the deptt.) (BCD-5.5.30)

Providing two coats of synthetic enamel paint of approved shade and make over steel surface including cleaning the surface thoroughly, scaffolding and taxes all complete as per building specification and direciton of E/l.(BCD-5.8.45)

Supplying, fitting and fixing C.A.R.W.D. pipe with necessary strips spikes, bends, shoes etc. including cost of carriage, all complete, as per building specification and direction of E/l. (75mm dia) (BCD-5.10.35)

Supplying, fitting and fixing the following items complete with all materials as per specification and direction of E/I (a) Glass shelf with C.P. brass rail (ii) 450x125mm glass shelf complete. ( 3.1.21 DWSD 2022)

Supplying materials and labour for construction of 600x600x900mm stop cock chamber of brick masonry with 125 mm thick work of designation 75B in cement mortar (1:6) with 12mm thick cement Plaster in C.M. (1:6) on inside only having 50 mm thick R.C.C. cover having 12 mm dia lifting rings, 2 nos. stop cock chamber will rest over 80mm thick P.C.C. (1:3:6) over one brick flat soling, including cost of earthwork, all complete job, as per approved design, specification and direction of E/l. (3.1.28 DWSD 2022)

Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge. 16.91.2 60mm thick C.C. paver block of M-35 grade with approved colour, design & pattern. (DSR 16.91.1)

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement : 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge). (16.69 DSR)

Supplying Polythene water storage tank of ISI Mark (e.g. Sintex etc.) (Supply-M-079 DWSD)

Supplying, fitting and fixing vitreous white glazed earthen ware I.W.C of parry Hindustan or any other I.S.S approved make with 100mm H.C.I. 'p' trap 15 litres C.I. pull and let go flushing cistern of names or other I.S.S.equivalent make, complete with all fittings.C.I or C.C.brackets 32mm alkathene/P V.C. telescopic flush, pipe about 2 M long with one brass coupling and clamps G.I. chain and pull including supplying and fixing a pair of vitreous white glazed earthenware ware footrest to be fixed in floor 15mm C.1. body brass spindle stope cock of weight not less than 50grms, 15mm P.V.C. connection pipe- 450 mm. long and the exposed pipe and cistern with two coats of approved paint over a coat of red oxide primer etc. all complete as per specification and direction of El. (B) 510 mm long (b) With 12.5 lit low level C.I. cistern (3.2.1 DWSD 2022)

Supplying, fitting and fixing flat back or angular, lipped front vitreous white glazed earthen ware urinal of Hindustan "Parry" or any other approved I.S.S make with 5 liters capacity C.I. automatic fulsing cistern of reliance for any other I.S.S. approved make with all fittings with C.L.or R.S brackets, standard size G.I. flush pipe with fitting clamps, 15mm C.I. body brass spindle stop cock of approved quality weight not less than 400grams, 15mm P.V.CJAlkthene pipe 450mm longwith brass coupling at both ends and doing plumber joints inclu ding painting of exposed part with two coats of approved paint over a priming coat of red oxide, cutting wall and floor, making good the same etc. all complete as per specification and direction of E/I. (a) Flat back or standing corner (600mmx350mm) (3.2.3 (a) DWSD 2022)

Supplying, fitting and fixing vitreous white glazed earthen ware indian squating type 600x350mm urinal plate of parry, Hindustan or any other 1.S.S. approved make with internal flushing rim, 100mm white glazed earthen ware channel about 1m. long 5 litre capacity C.I. automatic flushing cistern of reliance or any other approved make wit fittings R.S. or C.I. brackets 15mm and 45 cm long PVC/Alkathene pipe standard G.I. flush pipe for backand front with spreader fittings and brass coupling etc. 15 mm C.I. Body 'brass spindle stop cock OUR weight not less than 450 grams. all complete including painting of exposed parts with 2 coats of approved paint over a coat of red oxid primer and cutting the wall and floor and making good the same as per specification and direction of El. (b) 450 mm x 350 mm size (small) (3.2.4 (b) DWSD 2022)

Supplying fitting and fixing vitreous white glazed earthen ware wash hand basin of parry or Hindustan or any other I.S.S. approved make supported on painted C.I. or R.S. brackets 32mm C.I.brass waste, mm dia C.I. body brass spindle stop cock of approved quality of weight not less than 350grams, 32mm P.V.C. waste pipe 750mm lo with brass coupling at one end and making plumber joints etc. all complete as per specification and direction of E/I (3.2.5 DWSD 2022)

Providing and fixing PTMT bib cock of approved quality and colour. 18.54.1 15mm nominal bore, 86 mm long, weighing not less than 88 gms (DSR 18.54.1)

Providing and fixing15mm dia male ended 15mm dia brass bib cock of approved quality (Wt. not less than 350gms.) with extra socket all complete as per specification and direction of El. (DWSD 3.1.5.1)

Providing and fixing 15mm size C.P. brass pillar cock (Weight not less than 350gms). C.l.bbdy brass spindle pillar cock of approved quality as per specification and direction of Engineer-in-Charge. (b) C.1. body brass spindle. (DWSD 3.1.11 (b))

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 15 mm nominal outer dia Pipes (DSR 2021 18.7.1)

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 20 mm nominal outer dia Pipes (DSR 2021 18.7.2)

Supplying and fixing G.I. fitting of approved make (Conforming to IS 1879) all complete as per specification and direction of E/l. (1) Elbow 15mm dia (DWSD 3.1.13 (1) (a) (b))

Supplying and fixing G.I. fitting of approved make (Conforming to IS 1879) all complete as per specification and direction of E/l. (1) Elbow 20mm dia (DWSD 3.1.13 (1) (a) (b))

(2) Tee plain 15mm dia (DWSD 3.1.13 (2) (a) (b))

(2) Tee plain 20mm dia (DWSD 3.1.13 (2) (a) (b))

(3) Reducing socket 20mm dia (DWSD 3.1.13 (3) (b))

(4) Nipple 15mm dia (DWSD DWSD-21 3.1.13 (4) (a) (b))

(4) Nipple 20mm dia (DWSD DWSD-21 3.1.13 (4) (a) (b))

(7)Union Socket 15mm dia (DWSD-3.1.13 (7) (a) (b))

(7)Union Socket 20mm dia (DWSD-3.1.13 (7) (a) (b))

(8) Socket 15mm dia (DWSD-3.1.13 (8) (a) (b))

(8) Socket 20mm dia (DWSD-3.1.13 (8) (a) (b))

(9)Bends 15mm dia (DWSD-3.1.13 (9) (a) (b))

(9)Bends 20mm dia (DWSD-3.1.13 (9) (a) (b))

(10) Jam nuts 15mm dia (DWSD-3.1.13 (10) (a) (b))

(10) Jam nuts 20mm dia (DWSD-3.1.13 (10) (a) (b))

Providing and fixing G.M. non-return valve Horizontal/vertical type of approved qualilty as per specification and direction of Engineerin Charge. 15mm dia (DWSD-3.1.7 (B) (a)(b))

Providing and fixing G.M. non-return valve Horizontal/vertical type of approved qualilty as per specification and direction of Engineerin Charge. 20mm dia (DWSD-3.1.7 (B) (a)(b))

Point wiring in PVC conduit with piano type switch- wiring for light point /fan point. Group- A (E.D-1.1.1 SOR 2022)

Wiring for circuit/sub main wiring along with earth wire with the following sizes of FR PVC insulated copper conducter single core cable in surface recessed PVC conduit as required 2x1.5 sq. mm + 1 x 1.5 sq mm earth wire (E.D-1.7.1)

Wiring for circuit/sub main wiring along with earth wire with the following sizes of FR PVC insulated copper conducter single core cable in surface recessed PVC conduit as required 2x10 sq. mm + 1 x 6 sq mm earth wire (E.D 1.7.5)

(a) LED Bulb 9/10 watt (E.D-M-855)

(b) LED Bulb 15/16 watt (E.D-M-855)

6 Amp. Socket, 3 pin (E.D-1.24.4)

Holder (E.D-1.34)

Supply of 12'' (300 mm) Metal Exaust Fan (Include CP) (E.D-M775)

32amp double pole on hold change over switch. (ED-M577 SOR 2022)

Cement Lead 5 km (P)

Sand Lead (1K+9P)km

Stone chips Lead (1K+24P)km

Bricks Lead (1K+7P)km

Steel Lead 5 km (P)

Earth work in excavation in foundation trenches in ordinary soil (vide classification of soil item - A) and disposal of excavated earth as obtained to a distance upto 50 M. including all lifts, levelling, ramming the foundation trenches, removing roots of trees, shurbs all complete as per approved design building specification and direction of E/I (Sign Board)

Providing coarse clean local sand in filling in foundation trenches or in plinth including ramming and watering in layer not exceeding 150 mm thick with all leads and lifts including cost of all materials, labours, royalty and taxes all complete as per buiding specification and direction of E/I. (Mode of measurement compacted volume) (Sign Board)

Providing designation 75 B one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/l.(Sign Board)

Providing and laying in position cement concrete of PCC(1:2:4) graded stone aggregate 20 mmnominal size. Exciuding the cost of centering and shuttering. All work up to plinth level.(Sign Board)

Providing designation 75 B brick work in C.M. (1:6) in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth, curing, taxes and royalty all complete as per building specification and direction of E/l. (Sign Board)

Providing designation 75 B brick work in C.M.(1:6) in superstructure with approved quality of clean coarse sand of F.M. 2 to2.5 including providing 10 mm thick mortar joints cost of screening materials , scafolding , raking out joints to 15mm depth curing, taxes and royalty all complete as per building specification and direction of E/l.(Sign Board)

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Granite stone slab colour black Area of slab upto 0.50 sqm (Sign Board)

Providing 12mm cement plaster (1:4) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/l.(Sign Board)

Providing 1.5mm cement punning including curing, carriage of water with all leads and lifts as per building specification and direction of E/l.(Sign Board)

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.(Sign Board)

Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) (Sign Board)

Loading and Unloading of stone bolder/ stone aggregates/ sand/ kanker/ earth/ moorum (placing tipper at loading point, loading with front end loader, dumping, turning for return trip, excluding time for haulage and return trip). (Sign Board)

Carriage of Cement (Sign Board)

Carriage of Sand (Sign Board)

Carriage of Stone chips (Sign Board)

Carriage of Bricks (Sign Board)

Add GST @18%

Add Labour Cess @1%

M/S CHANDEL CONSTRUCTION