Supply, installation, testing and commissioning of fire fighting system for the Newly constructed Engineering Block along with the allied works at SKIMS, Soura

Amount

Providing, laying, jointing and testing of following sizes of pipes conforming to IS1239 with all accessories like all fittings including tees, elbows, reducers, flanges, rubber gaskets, nuts bolts and washer. And fixing the pipe on floor / wall /ceiling with suitable size clamps, hangers, structural steel supports as per specification. And G.I. pipe sleeve to be provided wherever the pipes are crossing the walls/floors and sealing the sleeves as per requirements including cutting holes and chases in brick, R.C.C work and making good the same to original conditions complete in all respects. Pipe shall be MS black as per IS-1239 heavy grade and fitting for 40 mm and below be of screwed fittings and above BW 'C' class fittings

25 mm dia.

32 mm dia.

40 mm dia.

50 mm dia.

65 mm dia.

80 mm dia.

100 mm dia.

150 mm dia.

Providing two coats of synthetic enamel paint of approved shade over a coat of primer. Including painting of legends both direction arrows as per the approval of the site in-charge engineer.

25 mm dia.

32 mm dia.

40 mm dia.

50 mm dia.

65 mm dia.

80 mm dia.

100 mm dia.

150 mm dia.

Providing and fixing gun metal ball valve suitable for pressure 15 Kg/Cm2 and confirming to IS: 778 of the following size including providing necessary union / flange.

25 mm dia.

Providing & fixing of butterfly valve suitable for pressure 15 Kg/Sqcm. with flanges, nut bolts & gaskets complete required.

150 mm dia.

100 mm dia.

80 mm dia.

50 mm dia.

Supply, Installation, Testing & Commissioning of Single headed, Gunmetal ISI marked oblique pattern hydrant landing valve with 80 mm dia. flange inlet and 63 mm dia. instantaneous type female out let complete with gunmetal cap and G.I chain twist release type plug and all accessories as per IS:5290-1983.

Providing & fixing swinging type First Aid hose reel in red colour with 36 mts. long and 20 mm dia. heavy duty rubber water hose, 20 mm dia. globe valve stop cock, terminating with G.M. coupling & nozzle of 5mm outlet with shut off valve confirming to IS 8090-1976 complete with drum and brackets for fixing on wall, bolts & nuts conforming to IS:884-1969 complete as required.

Providing & fixing Non-percolating flexible hose (RRL type – A) ISI marked (IS:636 Type A) 63 mm dia. x 15 m long complete with ISI marked Male and female coupling (IS:903) bound and riveted to hose pipe with copper rivets and 1.5 Sq.mm copper wire bursting pressure not less than 22 Kg/Sq cm (two nos. for each Internal hydrant-valve)

Providing & fixing Controlled Percolating (CP) Hose ISI marked (IS:8423) 63 mm dia x 15 m long complete with instantaneous type gunmetal 63 mm dia ISI marked Male & Female couplings (IS:903) bound and riveted to hose pipe with copper rivets and 1.5 mm copper wire.brusting pressure not less than 22 Kg/Sqcm. (two nos. for each external hydrant-valve)

Providing & Fixing Gun-metal 63 mm dia short size branch pipes with 20 mm dia nozzle with 63 mm instantaneous coupling ISI marked (IS:903)

Providing and fixing standard firemans axe with heavy rubber handle.

Providing and fixing 4mm thick glass door of size 2.1m x 0.9m x 0.6m with anodized aluminium frame of size 0.10 x 0.05 M with centre opening for fire hose cabinet. Suitable marked on the outside with the letters "FIRE HOSE" including locking arrangement. All aluminium work to be in Red P.O. colour.

Providing and fixing of weather proof MS Hose cabinet fabricated out of 16 gauge MS Sheet with full glass door and locking arrangment suitable to accommodate 1 Hydrant landing valve, one fire hose reel, 2 no 15 mtr long 63 mm dia hose with connecting couplers, one branch pipe, nozzle and fire man's axe. The door shall be painted with one coat of primer and finished stove enamelled "Fire Red", "Fire Hose"written on front including sutitably mounted brick masonry duly plastered.

Providing and fixing inlet breeching having C.I. body Two way gun metal 63 mm dia instantaneous inlets conforming to IS 903 fitted with non return valves, 25 mm dia gun metal drain cock, blank cap, brass chains and 150 mm dia flanges with all accessories suitable for local fire tender complete as required in Down Comer Riser

Providing and fixing dial type pressure gauge with isolation cock and copper pipe on main header Dial diameter 100 mm celebration 0-14 / sq. cm with isolation valve of suitable size.

Providing and fixing Chrome finish quartzoid bulb sprinklers of size 15mm dia (Pendent / upright / side wall) to be Operated at 68 Deg C. Including two piece of adjustable C.P. Rosset complete as required.

Pendent through type

Upright through type

Providing and fixing 25 mm dia inspection & testing assembly with gunmetal valve sight glass, valve & connected to drain line.

Providing & fixing in the false ceilings, high pressure metallic hose with fittings (25 NB at one end for connection to pipe and 15 NB at the other end for the Sprinkler) for connecting the Sprinklers to Sprinkler piping system, Hose & Fittings to be UL listed or FM approved and installed in accordance with para 9.2.1.3.3 of NFPA-13 (2007 edition) Test Pressure 10.0 Kg/Sq.m.

Length upto 500 mm

Length upto 700 mm

Providing & fixing Electrically operated Flow indicating Switches with threaded connection for a minimum flow of 90 lpm for indicating water flow in sprinkler's branch line with necessary junction box installed complete with tee glands and other accessories as per specifications.

80 mm dia.

Supply ,Installation, Testing and Commissioning of Cast iron dual plate wafer type non return valves PN 1.6 including nuts, bolts, 1.5 mm thick gasket companion flanges of below mentioned diameters and as per the techinical specifications of annexure B.

150 mm dia.

Providing and fixing in position Auto air vents of following size etc. Rest of specification as per technical annexed as annexure B.

20 mm dia.

M/S HI TECH ENGINEERING SERVICES

FAVOURITE ELECTRICALS