Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹40.6 LAccepted-AOC MILANPARA P O RAIGANJ 733134 DIST UTTAR DINAJPUR | RAIGANJ | UTTAR DINAJPUR | WEST BENGAL | 733134 | ₹40.6 L Quoted ₹4.1 Cr | L1 | Accepted-AOC L1 |
| 2 | L2₹44.6 LRejected-Finance NETAJIPALLY RAIGANJ DIST UTTAR DINAJPUR | RAIGANJ | UTTAR DINAJPUR | WEST BENGAL | ₹44.6 L | L2 | Rejected-Finance L2 |
| 3 | L3₹48.7 LRejected-Finance 410 405 TUISHITALA KHARMUJAGHAT ROAD RALGANJ UTTAR DINAJPUR WB 733134 | RAIGANJ | UTTAR DINAJPUR | WEST BENGAL | 733134 | ₹48.7 L | L3 | Rejected-Finance L3 |
Tender Value
Refer Docs
EMD Value
₹80,800
Closing Date
27 Aug 2025, 12:00 pmClosed
Secretary, Uttar Dinajpur Zilla Market Committee
OFFICE OF THE UTTAR DINAJPUR ZILLA REGULATED MARKET COMMITTEE, KARNAJORA, RAIGANJ, UTTAR DINAJPUR
UDZRM/SECY/21/2025-26
2025_WBSMB_888238_1
UDZRM/SECY/21/2025-26
Open Tender
CIVIL WORKS
180 days
GHORDHAPPA
Please refer Tender documents.
4 documents required · 4 mandatory
₹3,000
₹80,800
16 Dec 2025
8 Aug 2025
27 Aug 2025
8 Aug 2025
27 Aug 2025
8 Aug 2025
Amount
Earthwork in excavation of foundation, trenches, drains in all sorts of soil including mixed soil but excluding laterite or sand stone including removing , spreading or stacking the spoils within a lead of 75mm as directed, the item including trimming the sides of trenches leveling dressing and ramming the bottom bailing out water as required complete. a)Depth of excavation not exceeding 1.50mtr.
Earthwork in filling in foundation trenches or plinth with good earth in layers not exceeding 150mm including watering and ramming etc. layer by layer complete.(with earth obtained from excavation of foundation.
Supplying & laying Polythene sheet (150 gm/Sq. m ) over damp proof coarse or below flooring or roof tarracing or in foundation or foundation trenches.
Cement Concrete with 40 mm down ballast excluding shuttering. (1:3:6 proportion.)( Pakur Vr.)
Brick work with 1st class bricks in cement mortar (6:1) a) In Foundation and Plinth i) In ground floor
Brick work with 1st class bricks in cement mortar (6:1) b) In Superstructure
Brick work with 1st class bricks in cement mortar (6:1) b) In SuperstructureII) In First Floor
125mm thick brick work with 1st class bricks in cement mortar (4:1) . I) in Ground floor.
125mm thick brick work with 1st class bricks in cement mortar (4:1) . II) In First Floor
Ordinary Cement Concrete (mix 1:1.5:3) with graded stone chips 20mm. nominal sizes excluding shuttering and reinforcement (if any) as per relavent IS Code . (i) Pakur Vr. I) in Ground floor.
Ordinary Cement Concrete (mix 1:1.5:3) with graded stone chips 20mm. nominal sizes excluding shuttering and reinforcement (if any) as per relavent IS Code . (i) Pakur Vr.II) In First Floor
Hire and labour charges for shuttering with centering and necessary staging upto 4m using approved stout props and thick hardwood planks of approved thickness with required bracing for concrete slabs, beams, columns, lintels, curved or straight including fitting fixing and striking out after complete of works(upto roof of groun floor). f) 25mm to 30mm shuttering without staging in foundation. I) in Ground floor.
Hire and labour charges for shuttering with centering and necessary staging upto 4m using approved stout props and thick hardwood planks of approved thickness with required bracing for concrete slabs, beams, columns, lintels, curved or straight including fitting fixing and striking out after complete of works(upto roof of groun floor). (a) 25 mm to 30 mm thick wooden shuttering as per decision & direction of Engineer-In-Charge. In Ground Floor
Hire and labour charges for shuttering with centering and necessary staging upto 4m using approved stout props and thick hardwood planks of approved thickness with required bracing for concrete slabs, beams, columns, lintels, curved or straight including fitting fixing and striking out after complete of works(upto roof of groun floor). (a) 25 mm to 30 mm thick wooden shuttering as per decision & direction of Engineer-In-Charge. In 1st Floor
(i) Reinforcement for reinforced concrete work in all sorts of structure including distributors, stirrups binder etc. including supply of rods initial straightening and removal of loose rust ( if any) necessary cutting to requisite length hooking and bending to correct shape placing in proper position every intersection complete as per drawing and direction. For works in foundation, basement, roof of ground floor/upto 4m. i) Tor Steel II) Other than Sail/TATA/RINL i) gr. Floor
(i) Reinforcement for reinforced concrete work in all sorts of structure including distributors, stirrups binder etc. including supply of rods initial straightening and removal of loose rust ( if any) necessary cutting to requisite length hooking and bending to correct shape placing in proper position every intersection complete as per drawing and direction. For works in foundation, basement, roof of ground floor/upto 4m. i) Tor Steel II) Other than Sail/TATA/RINL II) In First Floor
Plaster (to wall, floor, ceiling etc.)with sand and cement mortar including rounding off corners and chamfering corners as directed and racking out including, throating, nosing and drip coarse, scafolding/ staging where necessary(Ground Floor) (Excluding cost of chipping over concrete surface.) (i)(b)20mm th. Cement plaster(1:6) i) gr. Floor
Plaster (to wall, floor, ceiling etc.)with sand and cement mortar including rounding off corners and chamfering corners as directed and racking out including, throating, nosing and drip coarse, scafolding/ staging where necessary(Ground Floor) (Excluding cost of chipping over concrete surface.) (i)(b)20mm th. Cement plaster(1:6) II) In First Floor
Plaster (to wall, floor, ceiling etc.)with sand and cement mortar including rounding off corners and chamfering corners as directed and racking out including, throating, nosing and drip coarse, scafolding/ staging where necessary(Ground Floor) (Excluding cost of chipping over concrete surface.) (i)(c)15mm th. Cement plaster(1:6) i) gr. Floor
Plaster (to wall, floor, ceiling etc.)with sand and cement mortar including rounding off corners and chamfering corners as directed and racking out including, throating, nosing and drip coarse, scafolding/ staging where necessary(Ground Floor) (Excluding cost of chipping over concrete surface.) (i)(c)15mm th. Cement plaster(1:6) II) In First Floor
Plaster (to wall, floor, ceiling etc.)with sand and cement mortar including rounding off corners and chamfering corners as directed and racking out including, throating, nosing and drip coarse, scafolding/ staging where necessary(Ground Floor) (Excluding cost of chipping over concrete surface.) (ii) (b)15mm th. Cement plaster(1:4) i) gr. Floor
Plaster (to wall, floor, ceiling etc.)with sand and cement mortar including rounding off corners and chamfering corners as directed and racking out including, throating, nosing and drip coarse, scafolding/ staging where necessary(Ground Floor) (Excluding cost of chipping over concrete surface.) (ii) (c)10mm th. Cement plaster(1:4) i) gr. Floor
Plaster (to wall, floor, ceiling etc.)with sand and cement mortar including rounding off corners and chamfering corners as directed and racking out including, throating, nosing and drip coarse, scafolding/ staging where necessary(Ground Floor) (Excluding cost of chipping over concrete surface.) (ii) (c)10mm th. Cement plaster(1:4) II) In First Floor
Neat cement punning 1.5mm thick in wall dado window silt, floor, drqins etc. using cement @ 0.152M3/M2 i) gr. Floor
Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. (In Ground Floor) (a) One Coat i) Water based interior grade Acrylic Primer i) gr. Floor
Applying exterior grade acrylic Primer of approved quality and brand on plastered or concrete surface old or new surface to receive decorative textured (matt finish) or smooth finish / Acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacture's specification and as per direction of EIC. (b) two coats i) gr. Floor
Applying Acrylic Emulsion Paint of approved make and brand on walls and ceiling including sand papering in intermediate coats including putty (to be done under specific instruction of Superintending Engineer) : (Two coats) ii) Luxury Quality
Protective and decorative textured exterior high class matt finish paint of approved quality, composed of special Tharmoplastic Resin containing fine crystaline additives derived from granite as per manufacture's specification and as per direction of EIC to be applied over acrylic primer as required.( Two Coats )
Supplying fitting fixing fan hook for ceiling with 1 mtr long 16mm dia complete.
Supplying and laying true to line and level vitrified tiles of approved brand (size not less than 600 mm X 600 mm X 10 mm thick) in floor, skirting etc. set in 20 mm sand cement mortar (1:4) and 2 mm thick cement slurry back side of tiles using cement @ 2.91Kg./sqM or using polymerised adhesive (6 mm thick layer applied directly over finished artificial stone floor/Mosaic etc without any backing course) laid after application slurry using 1.75 Kg of cement per sqM below mortar only, joints grouted with admixture of white cement and colouring pigment to match with colour of tiles / epoxy grout materials of approved make as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials, labour and all other incidental charges complete true to the manufacturer's specification and direction of Engineer-in-Charge. (White cement, synthetic adhesive and grout material to be supplied by the contrr]e). (I) With application slurry @1.75 kg/ Sq.m, 20 mm sand cement mortar (1:4) & 2 mm thick cement slurry at back side of tiles, 0.2 kg/ Sq.m white cement for joint filling with pigment. (B) Light Colour
Supplying, fitting & fixing best quality digital printed Ceramic tiles in coloured decorative on walls and floors to match with the existing work & 4 nos. key stones (10mm) fixed with adhesive 4.5 mm thick at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc. With polymerised adhesive and epoxy grout pointing including spacer - 2mm (When tiles are laid over existing hard ready surface) all complete as per direction of EIC
M/S B PAUL AND COMPANY (BID ID -6873299)
PRADIP DAS (BID ID -6873471)
stage.html
html • 0.02 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid