Formation of Bypass to Thirupathur Town (Phase - I) Km 0/0 - 5/225

Clearing heavy jungle by cutting, removing and disposing of all materials such as bushes, shrubs, stumps, roots, grass, weeds, top organic soil not exceeding 150mm in thickness rubbish including cutting of trees upto 150mm girth as per clause No.201 of MORT&H Vth rev.

Providing and laying carted earth of CBR 8 for construction of sub grade and side berms in accordance with specification and the lines, grades and cross sections shown in the drawings or as indicated by the Engineer for Carted Earth with a leadof 13 Km for the formation of road for 95% Compaction MORT&H No.305

Providing and laying carted earth for construction of sub grade and side berms in accordance with specification and the lines, grades and cross sections shown in the drawings or as indicated by the Engineer for Carted Earth with a leadof 13 Km for the formation of road for 97% Compaction MORT&H No.305

Earthwork excavation in all classes of soil except hard rock requiring blasting and depositing on bank with all leads and lifts as per SS20B, including cost of all labour, equipments and all incidential charges such as bailing out water, providing and maintaining necessary cofferdams, sheeting, shoring bracing and their subsequent removal, removal of all logs, stumps, grubs and other deleterious matter and obstructions, trimming bottom of excavation backfilling, and clearing the site and disposal of all surplus materials etc., complete as per relevant standard specification for cutting as per MORT&H Vth specification No.301,111,112

Construction of Granular sub-base Grade-V 180mm thick by providing close graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per clause 401 (Specification Number as per MORTH Rev.V 111,112,401,900).

Construction of Granular sub-base Grade-III 100mm thick by providing close graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per clause 401 (Specification Number as per MORTH Rev.V 111,112,401,900).

Providing and laying, spreading and compacting graded stone aggregates to Wet Mix Macadam 250mm. thick in two layers of 125mm each thick specification including premixing the materials with water at OMC in mechanical mix plant carriage of mixed material by tipper to the site, laying in uniform layers with pavers in sub base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density including cost of material, labour charges, rentals for machinery, fuel and all other incidental charges etc., complete as per clause 111,112,406,900 of MORTH Rev-5 for formation of Bypass Road

Providing and laying Prime Coat over WBM/WMM surface using 7Kg of Emulsion Bitumen(SS1) per 10sqm for preparatory to another bituminous construction over it, including cost of material, labour charges, rentals for machinery, fuel and all other incidental charges etc., complete as per Clause 111,112,502,900 of MORTH Rev-5 for formation of Bypass Road

Providing and laying Tack Coat over WBM/WMM surface (treated with primer) using 2.50Kg of Bitumen Emulsion(RS1) per 10sqm for preparatory to another bituminous construction over it including cost of material, labour charges, rentals for machinery,fuel and all other incidental charges etc., complete as per Clause 111,112,503,900 of MORTH Rev-5 for formation of Bypass Road

Providing and laying 100 mm consolidated thick Dense Bituminous Macadam using 0.24 cum. Of 26.50-13.20mm, 0.25 cum. Of 13.20-2.36 mm and 0.23 cum. Of 2.36 mm & below and with 53.20 kgs. Of VG 40 bitumen for premixing per 10 sqm. Including cost and conveyance of all materials to CMP site, heating the bitumen and aggregate to required temperature and mixing them in required temperature in central hot mix plant 20-30 ton capacity, conveying the mix by tipper trucks to work site, spreading the mix to uniform thickness of 50mm with paver to the specified grades and cross sections and compacted by vibratory / pneumatic roller to the required density etc., including labour for attending to paver at site etc., including hire charges and fuel charges for 20-30 t CMP with bitumen boiler, tipper trucks, paver finisher, vibratory / pneumatic rollers and all other tools and plant required, including fuel and all other incidental charges etc., complete as per specification using CMP as per clause 111, 112, 505, 900 MORTH Rev-5.