Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹4.1 LAccepted-AOC AT PO SAYAL DISTT RAMGARH PIN 829125 | SAYAL | RAMGARH | JHARKHAND | 829125 | L1 | Accepted-AOC L1 bidder quoted rate lesser than L2 bidder | |
| 2 | L2₹4.5 L+₹36,391.20 (8.80%)Rejected-Finance AT DAKRA KHALARI RANCHI JHARKHAND PIN CODE 829210 | RANCHI | RANCHI | JHARKHAND | 829210 | L2 | Rejected-Finance L2 quoted rate higher than L1 bidder | |
| 3 | L3₹4.7 L+₹58,551.60 (14.2%)Rejected-Finance AT BACHRA KALI MANDIR CHATRA JHARKHAND 829201 | CHATRA | CHATRA | JHARKHAND | 829201 | L3 | Rejected-Finance L3 quoted rate higher than L1 bidder | |
| 4 | L4₹5.0 L+₹81,703.20 (19.8%)Rejected-Finance AT PO RAY DISTT RANCHI JHARKHAND 829209 | RANCHI | JHARKHAND | 829209 | L4 | Rejected-Finance L4 quoted rate higher than L1 bidder | |
| 5 | Rejected-Technical A P O RAY DISTT RANCHI PIN 829209 | RAY | RANCHI | JHARKHAND | 829209 | - | Rejected-Technical Document not submitted as per NIT |
| Sl No | Description | Qty | Unit | M/S A. K. ENTERPRISES L2 | M/S ABHISHEK ENTERPRISES L1 | JAGDISH ENGINEERING WORKS AND SUPPLIER L4 | M/s Janardan Prasad Tanti L3 |
|---|---|---|---|---|---|---|---|
| 1.00 | 8” MS pipeline dismantling, laying and installation | 210 | m | 396 ₹83,160 | 195 ₹40,950 Lowest | 490 ₹1,02,900 | 500 ₹1,05,000 |
| 2.00 | Modification of base plate using 8” MS I-section,6/10 mm MS plate and 4” MS channel and modification of its shed by supplying and fixing CGI sheet | 1 | No. | 26,000 ₹26,000 | 68,000 ₹68,000 | 44,980 ₹44,980 | 4,600 ₹4,600 Lowest |
| 3.00 | Packing making for flange of 8” dia. from old conveyor belt cutting | 20 | No. | 150 ₹3,000 Lowest | 175 ₹3,500 | 430 ₹8,600 | 220 ₹4,400 |
| 4.00 | Supply and fixing of MS nut bolt 3”, 5/8 size and washer | 60 | kg | 165 ₹9,900 | 135 ₹8,100 Lowest | 210 ₹12,600 | 200 ₹12,000 |
| 5.00 | Supply and fixing of MS nut bolt ¾” ,7/8 size and washer | 40 | kg | 145 ₹5,800 | 135 ₹5,400 Lowest | 210 ₹8,400 | 350 ₹14,000 |
| 6.00 | Supply and fixing of 20 meter length hose pipe of 8 inch dia , working pressure -12 bar, burst pressure -15 bar, suitable of coal mine water | 2 | No. | 86,000 ₹1,72,000 | 55,000 ₹1,10,000 | 24,600 ₹49,200 | 200 ₹400 Lowest |
| 7.00 | 24” nipple making from 8” flange and fitting it in 8” hose pipe by fabrication/welding cutting with two set clamp in each joint | 14 | No. | 1,820 ₹25,480 | 1,220 ₹17,080 Lowest | 2,650 ₹37,100 | 1,500 ₹21,000 |
| 8.00 | 8” flange MS supply 8 mm thickness with 8 holes of 18 mm dia. for bolting. | 25 | No. | 1,300 ₹32,500 Lowest | 1,850 ₹46,250 | 3,500 ₹87,500 | 4,500 ₹1,12,500 |
| 9.00 | Installation of sluice valve and foot valve etc. | 4 | No. | 1,680 ₹6,720 Lowest | 3,000 ₹12,000 | 13,850 ₹55,400 | 18,000 ₹72,000 |
| 10.00 | Bend making as per equipment of 8 inch MS pipe | 6 | No. | 2,760 ₹16,560 | 6,500 ₹39,000 | 2,140 ₹12,840 Lowest | 9,000 ₹54,000 |
Tender Value
₹5.3 L
EMD Value
₹6,700
Closing Date
28 May 2025, 5:00 pmClosed
SO EnM Rajhara Area
CCL GM Office Rajhara Area Chandwa
8-inch pipeline work in Qry-1 Extension Mines of Rajhara Colliery for the installation of pumps for mine dewatering of mines under monsoon activity of 2025
2025_CCL_335604_1
GM(RA)/CHANDWA/EnM/25-26/05 Dated16.05.2025
Open Tender
Electrical and Maintenance Works
Item Rate
20 days
Rajhara OCP Rajhara Area
As per NIT
2 documents required · 2 mandatory
₹6,700
8 Aug 2025
16 May 2025
29 May 2025
16 May 2025
28 May 2025
16 May 2025
16 May 2025 - 24 May 2025
Amount
8” MS pipeline dismantling, laying and installation
Modification of base plate using 8” MS I-section,6/10 mm MS plate and 4” MS channel and modification of its shed by supplying and fixing CGI sheet
Packing making for flange of 8” dia. from old conveyor belt cutting
Supply and fixing of MS nut bolt 3”, 5/8 size and washer
Supply and fixing of MS nut bolt ¾” ,7/8 size and washer
Supply and fixing of 20 meter length hose pipe of 8 inch dia , working pressure -12 bar, burst pressure -15 bar, suitable of coal mine water
24” nipple making from 8” flange and fitting it in 8” hose pipe by fabrication/welding cutting with two set clamp in each joint
8” flange MS supply 8 mm thickness with 8 holes of 18 mm dia. for bolting.
Installation of sluice valve and foot valve etc.
Bend making as per equipment of 8 inch MS pipe
Total impact of GST for the purpose of CTC
M/S A. K. ENTERPRISES (BID ID -1155185)
M/s Janardan Prasad Tanti (BID ID -1156464)
JAGDISH ENGINEERING WORKS AND SUPPLIER (BID ID -1156568)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .