REPAIRS/ REPLACEMENT OF VARIOUS TOILETS, SANITARY AND WATER SUPPLY FITTINGS IN MEDIA HALL AND HANGARS IN TECHNICAL AREA AT AIR FORCE STATION YELAHANKA

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises etc complete all as specified and directed.

M&L Screed bed or bedding layer of mortar 15 mm thick for laying floor tiles in cement mortar 1:6 finished even and rough.

M&L Non skid Digital Havana Olive Dark-M (400mmX400mm) ceremic tiles 10 mm thick (square/rectangular) polished, area of each tiles not exc 0.36 Sqm in floors etc set and jointed in neat cemetn slurry and pointed in white or coloured cement to match.

M&L for rendering 10mm thick in cm 1:4 on fair faces of brick work or concrete surfaces finished even & smooth without using extra cement complete all as specified and directed by Engr-in-Charge.

M&L for glazed Digital Havana Olive (Dark/Light -M) (400mmX800mm) ceramic coloured tiles for work on vertical surface such as skirting, dado, set & jointed neat in cement slurry and pointed in white or coloured cement to match over , complete all as specified and as directed.

S&F in repairs Powder coated aluminium annodised section for door/window/ventilator not less than 2mm thick and for fully glazed door with 5.50mm thick tinted/frosted glass with one or more rebates including jointing cleats for fixing etc complete all as specified and directed.

S&F in repairs Powder coated aluminium annodised door/Windows/ventiliator shutters aluminium section weighing 0.55kg/m including necessary joining, fixed type, cleats, glazing clips, rubber neoprene packing, handles 02 nos in each door, hinges, anodised alumnium snap beading, screw etc complete all as specified and as directed.

S&F in repairs 8.00mm thick Forsted toughend glass, quality and glazing with aluminium beading in square exc 0.5 sqm in each pane.

Taking down door chowkats or frames exceeding 1.5 sqm but n exc 4 sqm with shutters (without taking off shutters from the frame) of any description

S&F 1st class hard wood (Teak wood) plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered put together with glue, pinned at joints including mirror polishing complete all as specified and directed.

S&F 40mm thick Factory made first class hard wood, (Teak wood) Solid construction shutters including mirror polishing complete all as specified and directed.

S& F flush door 40mm thick membrane doors decorative finish on one side duly finished and polished and other side all as per manufacturers directions as per tint / colour including necessary teak wood lippings of necessary all as directed by Engr - In Charge.

Cutting holes in brick/stone wall for inserting holdfast and making good dismantled portion in CM 1:3 or PCC 1:2:4 type -B0 (using 12.5mm graded aggregate depth of embedded portion of holdfast exc half brick but n exc one brick all as specified and directed.

S&F for Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required; hooks (stay), heavy, for large gates; hook and pintle hinges; large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe -290 Gde E-165

M &L French polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two or more coats, complete all as specified and directed.

S&F 200 mm long Brass barrel tower bolts, with barrel of extruded section and rolled or cast bolts

S&F 300 mm long Brass sliding door bolt with sand or die cast brass hasp , staple ( bolt type) and fixing bolts with rolled or drawn brass bolts

S&F 250mm long Brass sliding door bolt with sand or die cast brass hasp , staple ( bolt type) and fixing bolts with rolled or drawn brass bolts

S&F 125mm Butt Hinges, extruded brass, with mild steel hinge pin, bright polished and fixed , type C11

S&F 150mm Floor door stoper of Brass body body and tongue, with hard drawn steel spring, fixed in floor

S&F 150mm Extruded Brass handles, fabricated type polished

S&F in repairs hydraulically regulated door closer designation no.03 universal type,suitable for door shutters of 851 to 1000 mm in width and weight betwwen 61 to 80 kg width upto 1.50 mm complete all as specified and directed by Engr-in-Charge.

S&F in repairs Single Piece EWC with cistern, soft close seat cover and twin flushing fittings of size wash down water closet (pedestal pattern) of any colour including fixing of bolts complete all as specified and directed by Engr-in-Charge. Make: (Make : Jaguar Cat No QNS-WHT-7851S or its techno commercially equivalent)

S&F in repairs for vitreous china Table Top Modular wash basin white flat back size 500x420x120mm including cutting for and pinning in ends of brackets including of fixing of 32mm low density polylethyne pipes (LDPE) of pressure rating 6kg/cm2, coupling, PVC connection with 15mm PTMT cheknuts, brackets all complete as directed by Engr in Charge (Make : Jaguar cat No FLS-WHT-5935 or its techno commercially equivalent)

S&F in repairs CP Towel ring of including fiitings of neccessary screws etc.complete all as specified and directed by the Engr-in-Charge Make: Jaquar or its techno commercially equivalent.

S&F in repairs CP health fauccet of including neccessary holding arrangements with screws etc all as specified and directed by the Engineer -in -charge. Make: Jaquar or its techno commercially equivalent.

S&F in repairs swan neck Pillar cock CP 15 mm dia Make: Jaguar or its techno commercially equivalent.

S&F in repairs 15mm dia PVC connection 450/600 mm long all as specified.

S&F in repairs brass chromium plated bottle trap 32mm bore for wash hand basin with inlet and outlet and screwed for pipe complete all as specified and directed by Engr-in-Charge. Make: Jaquar or its techno commercially equivalent.

S&F in repairs 15 mm dia two way bib taps with wall flange (fancy type), cast copper alloy with screwed down, screwed for iron pipe or for brass ferrule complete with check nut 15mm bore complete all as specified and directed by Engr-in-Charge. Make: Jaquar or its techno commercially equivalent.

S&F in repairs Angle cock with wall flange 15 mm dia Fancy type. Make: Jaquar or its techno commercially equivalent.

S&F in repairs Soap Dish all as specied and directed by Engr-in-Charge. Make: Jaquar or its techno commercially equivalent.

S&F in repairs Paper holder with Flap Recessed Type (Stainless steel), , all as spd and directed by Engr-in-Charge. Make: Jaquar or its techno commercially equivalent.

S&F in repairs Corner Glass shelf with bracket, in repairs, all as specified and directed by Engr-in-Charge. Make: Jaquar or its techno commercially equivalent.

M&L 25 mm thickness Granite( of any size) work in WHB/ cooking plate form and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including crew cutting for any type of work.

S&F Vitreous china urinals with urinal Droplets sensor consealed type white or colour, including necessary (wall/tile) cutting and matching the same surface, fixed in repairs, all as specified and directed by Engr-in-charge. Make: Hindware (QUEO) Cat No. Q357610110 or its techno commercially equivalent.

S&F in repairs for 10mm thick Modular frosted toughen Glass Partition with accessories for urinals partition all as specified and directed by Engr-in-Charge Make : Jaguar or its techno commercially equivalent

Taking up or down 15mm bore steel tubing and connections including cleaning for refixing or removal to store.

Taking up or down 20mm bore steel tubing and connections including cleaning for refixing or removal to store.

S&F CPVC pipes 20 mm SDR 11 & Plain CPVC SDR 11 on walls, ceiling orf laying including fitting in floors all as specified and as directed by Engr in Charge.

S&F CPVC pipes 25 mm SDR 11 & Plain CPVC SDR 11 on walls, ceiling orf laying including fitting in floors all as specified and as directed by Engr in Charge.

S&F in repairs PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall (110 mm bore) including flat iron claim for proper fixing complete all as specified & directed by Engr-in-charge.

S&F in repairs PVC(SWR) bends 110mm dia complete all as specified & directed by Engr-in-Charge.

S&F in repairs PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall (75 mm bore) including flat iron claim for proper fixing complete all as specified & directed by Engr-in-charge.

S&F in repairs PVC(SWR) bends 75mm dia complete all as specified & directed by Engr-in-Charge.

S&F in repairs High density polyethylene pipes 50 mm bore of pressure ratings 6 kgf/cm2 fixed complete to walls,floors,ceiling etc. Including necessory fittings.

M&L for 75mm dia of outlet PVC Nahani trap with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed by Engr-in-Charge.

M&L for complete removal of existing treatment from walls by scrapping,washing down etc and and applying two coats of distemper oil emulsion white or tinted over one coat of primer complete all as specified and directed.

M&L for 3mm thick wall care putty on wall surfaces all as specified and directed by Engr-in-charge

Preparing the old painted surfaces of Ceiling , washing, rubbing down and stopping of distempered surfaces on ceiling , removing nails making good holes cracks and filling wall care putty etc and applying one coat of oil bound distemper all as specified and as directed.

Dismantling of old wall, Ceiling boards (Fibre,pulp,insulation,etc) or insulation boards /slabs blankets,including cover fillets and frame work.

S&F of ceiling board 12mm thick in ceiling fixed with screws all complete as per manufacturer’s instructions .

S&F Anodized aluminium snap grid of size 605mmx605mm (Powder coated) frame work for false ceiling, including 4mm dia GI wire for hanging all as specified in SSR and as directed by Eng-in-charge.

S&F in Repairs Powder coated aluminium composited Panel all as specified and directed by Engr-in-Charge.

Dismantling timber scantlings 40 sq.cm and over in section, in any position un framed work all as specified and directed by Engr-in-Charge.

S&F 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered put together with glue, pinned at joints including mirror polishing complete all as specified and directed.

M&L 19/20mm thick pre laminated Particule boards exterior grade decorative type with decovative face veneer on both face, fixed with screws to timber frame work all as specified and as directed fixed in repairs

Material and labour for preparation of old surface and applying one coat of aluminium paint to Gate and other surfaces all as specified and as directed

Material and labour for preparation of old surface and applying one coat of exterior emulsion on Floors surface all as specified and as directed.

NOTES: 1.Considering the emergent nature of work for upcoming aero India in the month of Feb 2021,the work has to be undertaken and completed before the Air show. 2.Contractor has to employ a minimum of 20 labours (in Two shifts)at the worksite for early completion of works, so as not to interfere with Aero India 2021. 3.Work has to be executed in two shifts during day and night everyday for the successful completion of works before Aero India 2021. 4.Approvals for the all items needs to be taken immediately after acceptance so that there is no delay in finalising the same. 5.Contractor must adhere to revised security and work protocols keeping Aero India in view.

Sri Maruthi Builders

Mahant Construction Co.

JyothsnaNursery

Moulya Builders

Vinayaka Enterprises

Power and Telecom Systems

Raghu M Contractor