Constructionn of Proposed 25TPD MRF Centre (Material Recovery Facility) of PEB Structure (PRIMARY & SECONDARY SHED) At Gangavathi city Limts

Constructionn of Proposed 25TPD MRF Centre (Material Recovery Facility) of PEB Structure (PRIMARY & SECONDARY SHED) At Gangavathi city Limts

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixe...

Hall Grade slab

Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates an...

Steel Fabrication: Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/w...

Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) . (Item No. 5.4 Page No. 9 Vol.2 PWD SR)

Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading,...

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...

Providing 15mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, includi...

Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of appro...

7.69 Providing and fixing Aluminium Turbo ventilator complete as per technical

specifications 7.69.1 Non Power Driven with 0.9mm thickness and 38 No.s of Vanes & turbine doom thickness 1mm and total w...

394 Galvanised wire mesh of average width of aperture 1.4 mm and nominal dia of wire 0.63 mm m2 280.00.(Item No. 394, Page No. A-24, Vol.2)

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05 %) total coated thickness with zinc coating 120 g/...

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 g/L of approved brand and manufacture, including applying additional c...

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 g/L of approved brand and manufacture, including applying additional c...

Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on spec...

Extra for providing 2 HP Mild Steel Auto Reverse Shutter Gearbox for operating rolling shutters including cost of materials, labour, usage charges of machinery complete as per specifications and as pe...

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of approved make conforming...

MainPanel SupplyingandfixingMouldedCaseCircuitBreaker(MCCB)overtheexistingwoodpanelboardusingnecessaryscrews,bolts,nuts,necessaryphaseseparators,handleandwiringcomplete.ProtectionofOverloadandShortcir...

5.19upplyingandfixingregularMCBdistributionboardsonwall/oodboard/flushmountingusingrequiredclamps,bolts,nutsetc.,withprovisionforfixingsuitabletypecapacityMCB'ssinglephase/3phase/singledoorwithpowderc...

190 30.01 8 Way with Poreclain Rewireable Cutout and & 1 No of 630 Amps Load Break Switch with Copper Busbar as per IS-13947 Part-1&2(Refer Dwg No. BESCOM/GM/QS&S/41 Dtd 24.11.2018) 300308 No 52119 ...

Sub panel-1 Incomer : MCB TPN 63A with CBCT ELR & Ph indicators, section with all parameters as required

599 69.04 Aluminium Busbar/Wire Pieces 791010

Kg 161.68 136 63A 4 Wire 16kA 415V Aluminium busbars compartment. (PWD Sr Vol-6 I.no : 30.01 Pno: 12/81)

5.46 Supplying andfixing of Modular MCBD evices (Tripper)WithBrak ng capacity of 6kA.5.46.663 A TP Each 1195.00 Pno : 21 Outgoings: 40/63A 4P MCB feeder- 10Nos..

5.17 Supplying andfixing regular MCCB distribution Panel confirming to IS/IEC61439 3 and IK09 tested as pe rIS/IEC62262withminimumIP43protectionprovidedwithPolyurethane(PUR)gasket,withsuitableearthing...

3.13 Supplying and fixing of metal clad industrial plugs and sockets. 3.13.8 32A Each 827.82 Pno : 09 Outgoings: 32A Industrial socket-04Nos.

Outgoings: 16A Industrial socket-04Nos.3.13.7 16A Each

LT Cables Supply & laying 1.1kV LT UG cable XLPE / heat resistant PVC insulated, PVC extruded inner sheath armoured as per IS:1554 part-1 or IS:7098 part-1, Armouring thickness +5% and resistivity 14...

209 32.13 70 Sqmm, 3.5 Core, (18 GI Strips - 4 x 0.8 mm) 287210 KM 317912 (PWD SR Vol-6 ELE I.No : 32.13 P.No: 13)

207 32.11 50 Sqmm, 3.5 Core, (16 GI Strips - 4 x 0.8 mm) 287208 KM 178973 (PWD SR Vol-6 ELE I.No : 32.11 P.No: 13)

204 32.08 25 Sqmm, 4 Core, (13 GI Strips - 4 x 0.8 mm) 287207 KM 179844 (PWD SR Vol-6 ELE I.No : 32.08 P.No: 13)

20132.05 16 Sqmm, 4 Core, (11 GI Strips - 4 x 0.8 mm) 287206 KM 141842 (PWD SR Vol-6 ELE I.No : 32.13 P.No: 13)

32 199 32.03 10 Sqmm, 4 Core, (10 GI Strips - 4 x 0.8 mm) 287205 KM 118004 (PWD SR Vol-6 ELE I.No : 32.03 P.No: 13)

Supply & installation of LT Cables End termination - Heavyduty cable Glands suitable for UG cable of 1.1kV Class. Epoxy Terminating Kit (Pothead) suitable for 1.1 kV, LTUG Cable 251 35.03 3.5 x 150/18...

(PWD SR Vol-6 ELE I.No : 34.08 P.No: 14) 3Cx70 Sqmm Al Ar cable

(PWD SR Vol-6 ELE I.No : 34.08 P.No: 14) 3.5Cx50 Sqmm Al Ar cable

249 35.01 Up to 4C x 50 Sqmm Set 324

(PWD SR Vol-6 ELE I.No : 34.06 P.No: 14) 4Cx25 Sqmm Al Ar cable

249 35.01 Up to 4C x 50 Sqmm Set 324

(PWD SR Vol-6 ELE I.No : 34.06 P.No: 14) 4Cx16 Sqmm Al Ar cable

249 35.01 Up to 4C x 50 Sqmm Set 324

(PWD SR Vol-6 ELE I.No : 34.06 P.No: 14) 4Cx10 Sqmm Cu Ar cable

249 35.01 Up to 4C x 50 Sqmm Set 324

(PWD SR Vol-6 ELE I.No : 34.06 P.No: 14) 4Cx6.0 Sqmm Cu Ar cable

249 35.01 Up to 4C x 50 Sqmm Set 324

(PWD SR Vol-6 ELE I.No : 34.06 P.No: 14) 3Cx6.0 Sqmm Cu Un Ar cable

249 35.01 Up to 4C x 50 Sqmm Set 324

(PWD SR Vol-6 ELE I.No : 34.06 P.No: 14) 3Cx4.0 Sqmm Cu Un Ar cable

Supply & installation of Tinned Copper lugs crimping & wiring to terminal point. 4.17 50 to 95 Sqmm 1261 (PWD SR Vol-6 ELE I.No : 34.01 P.No: 14) 70 Sqmm Al Ar cable (tinned copper lug)

34.16 25 to 35 Sqmm (PWD SR Vol-6 ELE I.No : 34.01 P.No: 14) 820 25 Sqmm Al Ar cable (tinned copper lug)

34.15 10 to 16 Sqmm Set 630 (PWD SR Vol-6 ELE I.No : 34.01 P.No: 14) 16 Sqmm Al Ar cable (tinned copper lug)

34.15 10 to 16 Sqmm Set 630 (PWD SR Vol-6 ELE I.No : 34.01 P.No: 14) 10 Sqmm Cu Ar cable (tinned copper lug)

34.01 10 Sqmm, 2 Core (PWD SR Vol-6 ELE I.No : 34.01 P.No: 14) 6.0 Sqmm Cu Ar cable (tinned copper lug)

34.01 10 Sqmm, 2 Core (PWD SR Vol-6 ELE I.No : 34.01 P.No: 14) 6.0 Sqmm Cu Un Ar cable (tinned copper lug)

34.01 10 Sqmm, 2 Core (PWD SR Vol-6 ELE I.No : 34.01 P.No: 14) 4.0 Sqmm Cu Un Ar cable (tinned copper lug)

PVC conduits & Accessories Supplying & Fixing heavey guage PVC conduit type 2mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc, and shall be concealed in wall...

CSR Electrical SR-2023-24, ITEM NO:1.1.1 ,CH-1, PAGE NO-1 25mm dia PVC 2mm thick conduit

CSR Electrical SR-2023-24, ITEM NO:1.1.2 ,CH-1, PAGE NO-1 32mm dia PVC 2mm thick conduit

CSR Electrical SR-2023-24, ITEM NO:1.1.3 ,CH-1, PAGE NO-1 40mm dia PVC 2mm thick conduit

Point wiring using Copper wire with switch SupplyingandwiringadoptingloopsysteminexistingPVCConduit/casingcappingusing2x1.5Sqmm(Phase&Neutral)&1x1.0sqmm(Earthwire)FRLSmultistrandPVCinsulatedcopperwire...

1 Light point above 3M upto 6Mtr from switch board CSR Electrical SR-2023-24, ITEM NO:2.1.2 ,CH-1, PAGE NO-5

1 Light point above 6M upto 10Mtr from switch board CSR Electrical SR-2023-24, ITEM NO:2.1.3 ,CH-1, PAGE NO-5

2 Light point above 3Mtr upto 6Mtr from switch board CSR Electrical SR-2023-24, ITEM NO:2.1.4 ,CH-1, PAGE NO-5

2 Light point above 6Mtr upto 10Mtr from switch board CSR Electrical SR-2023-24, ITEM NO:2.1.4 ,CH-1, PAGE NO-5

3 Light point above 6Mtr upto 10Mtr from switch board CSR Electrical SR-2023-24, ITEM NO:2.1.5 ,CH-1, PAGE NO-5

Circuit main wiring Supply & wiring from distribution board to looping switch boards. Laid wire size 2x2.5 Sqmm Ph-N & 1x1.5Sqmm for E for Lighting circuit wiring laid in existing conduit. 1.0 Sqmm ...

1.5 Sqmm Cu FRLS wire CSR Electrical SR-2023-24, ITEM NO:2.3.2 ,CH-1, PAGE NO-5

2.5 Sqmm Cu FRLS wire CSR Electrical SR-2023-24, ITEM NO:2.3.3 ,CH-1, PAGE NO-5

4.0 Sqmm Cu FRLS wire CSR Electrical SR-2023-24, ITEM NO:2.3.4 ,CH-1, PAGE NO-5

6.0 Sqmm Cu FRLS wire CSR Electrical SR-2023-24, ITEM NO:2.3.5 ,CH-1, PAGE NO-5

10 -12 Way Polycarbonate switch box plate CSR Electrical SR-2023-24, ITEM NO:3.5.7 ,CH-3, PAGE NO-8

18 Way Polycarbonate switch box plate CSR Electrical SR-2023-24, ITEM NO:3.5.8 ,CH-3, PAGE NO-8

Switches & sockets outlets in Existing modular box 6A one way switch CSR Electrical SR-2023-24, ITEM NO:3.6.1 ,CH-3, PAGE NO-9

6A Two way switch CSR Electrical SR-2023-24, ITEM NO:3.6.2 ,CH-3, PAGE NO-9

6A 5Pin socket CSR Electrical SR-2023-24, ITEM NO:3.6.3 ,CH-3, PAGE NO-9

Stepped fan regulator CSR Electrical SR-2023-24, ITEM NO:3.6.4 ,CH-3, PAGE NO-9

6/16A Universal socket CSR Electrical SR-2023-24, ITEM NO:3.6.10 ,CH-3, PAGE NO-9

Light fixture Supply & fixing of 100W LED light fixture IP 65, included screws accessoris Etc..Considered outdoor type light fitting for equivalent. CSR Electrical SR-2023-24, ITEM NO:11.9.2, PAGE N...

Earthing 12.58 GI/Copper strips for grounding connections, using necessary fixing materials as required.(PWD SR Vol-6 ELE I.No : 5.21 P.No: 18) 12.58.3 25 x 6 mm GI strip m 128.00

61 8.02 8 SWG GI Wire(4.064 mm Dia), Std Wt: 131 Kg/KM MT

75040 (PWD SR Vol-6 ELE I.No : 8.02 P.No: 5) 8.0 SWG GI bare wire

22 Control Cables and UG Cables ii Cable tray of 300 mm width (suitable for cable duct of D type) Supplying & Laying cable trays including welding, fixing of supports461 + 293

(PWD SR Vol-6 ELE I.No ...

Pipe earthing 5.21 Supplying,fixingandwiringearthleakagerelaywithcorebalancedcurrent transformers uitable fo rsingle phase 50Hz ACwithlatestmicrocontrollerbased,digitalreadoutofpercentageleakagecurre...