81556PROVISION OF MEDICAL GAS PIPELINE FOR MILITARY HOSPITAL AT NDA KHADAKWASLA.

Amount

SCH 'A' PART- I B/R PORTION

Excavating in trenches, not exc 1.5 m wide and not exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exc 10 sqm on plan and getting out hard dense soil complete all as specified and as directed.

Excavating in trenches, not exc 1.5 m wide and not exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exc 10 sqm on plan and not exc 1.5 m in depth for road cutting complete all as specified and as directed.

M&L for Cement concrete (1:4:8) type D-2 using 40 mm graded stone aggregate as in foundations, filling and mass concrete complete all as specified and as directed.

M&L for brickwork with fly ash old size bricks, straight or curved on plan exc 6 m mean radius, built in CM (1:6) complete all as specified and as directed.

M&L for Rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM 1:6 internal surfaces, finished even and smooth (without using extra cement) complete all as specified and as directed.

M&L for preparation of new plastered surfaces applying two coats of distemper oil emulsion over a coat of approved primmer on wall surface including wall care putty complete all as specified and as directed.

M&L for 15 mm thick rendering in CM (1:4) in two layers of 10mm and outer 5mm thick mixed with liquid water proofing compound fininshed even and fair on concrete or brick walls complete all as specified and as directed.

Supply only Liquid water proofing compound ISI marked complete all as specified and as directed.

M&L for preparation of new plastered surfaces and applying two coats of cement base paint on wall surface complete all as specified and as directed.

M&L for cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) design mix as in lintels upto 1.5 m clear span, bed plates including form work complete all as specified and as directed.

M&L for 20 mm dia mild steel rag or lewis bolts, screwed one end, with hexagonal or square nuts and washers, the other end enlarged, and jagged or lewised, exc 15 cm long but not exc 30 cm complete all as specified and as directed.

S&F Roof trusses (framed), trussed purlins crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc. Fe 410-W (Gde E-250) quality A complete all as specified and as directed.

S&F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates, Fe 410-W (Gde E-250) quality A complete all as specified and as directed.

S&F for Plates (plain or chequered) channels. Square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and as directed.

M&L for Preparation of new or previously untreated steel surface of any description over 10 cm in width or girth, not otherwise described, applying two coats of synthetic enamel paint over and including a coat zinc primer complete all as specified and as directed.

Supply and fixing Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F for Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as complete all as specified and as directed.

M&L for Machine cuddappa stone slab 18 -22 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

M&L for Granite 15mm to 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and as directed.

M&L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick spread, levelled and rammed including watering complete all as specified and as directed.

M&L for 150 mm thick Hardcore of broken stone gauge not exc. 63 mm, deposited, spread and levelled in layers not exc. 15 cm thick, watered and rammed to a true surface etc complete all as directed

M&L for 75 mm thick Cement concrete (1:4:8) type D-2 using 40 mm graded stone aggregate as sub base complete all as specified and as directed.

M&L for 100 mm thick plain cement concrete M-20 grade (Design mix) as in flooring and mass concrete (using 20 mm graded stone aggregate) etc complete all as specified and as directed.

M&L for for Forming 75 mm deep x 10 mm wide Contraction (Dummy) joints filled with sealing compound grade 'A' complete all as specified and as directed.

M&L for 15 mm thick wear proof topping as specified (incorporating an approved metallic floor hardener), laid on concrete floors and pavings, and finished even and smooth including metallic hardener etc complete all as specified and as directed.

Surface excavation n.exc. 30 cm deep and averaging 15 deep and getting out in hard dense soil complete all as specified and as directed.

M&L for Chequred cement concrete tiles with grey cement and pigments 30 cm x 30 cm x 25 mm thick, set, jointed and pointed in neat cement slurry in floors with 15 mm thick screed bed of CM (1:4) complete all as specified and as directed.

M & L Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and as directed.

Removing excavated material not exc. 50 m and depositing where directed at a level not exc. 1.5 m above the starting point (Soil) complete all as specified and as directed.

S& F for steel window with side hung shutter including Box type hinges with steel handle, and steel peg stay, complete with glazing bars dovetailed or welded complete all as specified and as directed.

S&F for sheet glass 3 mm thick ordinary quality and glazing with oil putty in square not exc 0.5 in each pane complete all as specified and as directed.

S&F for pressed steel door frames of siz 105 mm x 60 mm with one or more rebate inclding necessary fixing lugs, hings lock strike plate etc complete all as specified and as directed.

M&L for P.C.C. ( 1:3:6) type C-0 (using 12.5 mm thick graded stone aggregate) as in filling of pressed steel door frame complete all as specified and as directed.

S& F for 35 mm thick IInd class hard wood factory made plain framed , panelled shutter (two panel) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneered on both face . The size of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and as directed.

S& F for 125 mm long extruded aluminium alloy handle fabricated type anodised complete all as specified and as directed.

S& F for aluminium alloy anodised sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolt and sliding bolts of extruded section of 300 mm long complete all as specified and as directed.

S& F for aluminium anodised extruded section barrel tower bolt 200 mm long complete all as specified and as directed.

M&L for preparation of new wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over and including a coat pink primer complete all as specified and as directed.

M & L For RCC, M-25, Design Mix (using 20 mm graded stone aggregate) as in beam , lintel over 1.5 mtr span & Roof beam and like complete all as specified and as directed.

M&L for Use and waste of form work to sides and soffits of roof beam, beam etc for rough finished surfaces of concrete complete all as directed.

M & L for providing mild steel TMT bars 10 mm dia & over cut to length bent to shape required including cranking bending etc & binding with MS wire (annealed) not less than 0.90 mm dia complete all as specified and as directed.

M & L for providing mild steel TMT bars 5 mm dia and over up to and including 10 mm dia in stirrups, spacers and binders complete all as specified and as directed.

M&L for 75 mm thick cement concrete of type C-1 (1:3:6) (using 40 mm graded stone aggregate ) as in plinth protection with even and fair finished without extra cement complete all as specified and as directed.

M&L for RCC drain pipe 200 mm dia class NP-2 with collars laid in trenches with cement joint & tested complete all as specified and as directed.

SCH 'A' PART- II (INTERNAL ELECTRIFICATION)

S & F Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in existing surface/ recessed steel / PVC conduct required (4x4.0 sq. mm + 2x2.5 sq. Mm earth wire)

S & F Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in existing surface/ recessed steel / PVC conduct required (2x6.0 sq. mm +1x6.0 sq. mmearth wire)

S & F Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in PVC casing/caping conduct required (2x10.0 sq. mm+ 1x10.0 sq.mm earth wire)

Supply and fix Voltage stabilizer for automatic operation, three phase, naturally oil cooled, indoor type & designed for input variation between 340 V to 460 V with output voltage stabilized at 415 with accuracy ± 2.5% and speed of correction 8 Volts per second and of capacity 25 KVA with built in overload/short circuit protection High/Low voltage cut off and bypass arrengment complete all as directed.

S & F MCCB Distribution Board 8 way vertical TPN (VTPN) double,door,suitable for housing MCCB incomer and MCB SP/TP as out going having IP 43 protection, 200 Amps rated busbar including blank plate complete all as directed.

S & F Distribution Board 4 way TPN double,door,suitable for housing MCCB incomer and MCB SP/TP as out going having IP 54 protection, 200 Amps rated busbar including blank plate complete all as directed.

S & F Distribution Board 8 way SPN double,door,suitable for housing MCB incomer and MCB SP/TP as out going having IP 54 protection, 200 Amps rated busbar including blank plate complete all as directed.

Supply , fixing and connecting MCCB, 4P 415 Volt, 100 Amps having breaking capacity 16KA all as specified and directed.

Supply ,fixing and connecting MCB, TPN 415 Volt, 63 Amps having breaking capacity 25KA, with adjustable thermal release range 50 to 63 Amp.

Supply , fixing and connecting MCB SPN 240 Volt, 25 Amps 'C' series 10 KA.

Supply, fixing and connecting MCB SPN 240 Volt, 32 Amps 'C' series 10 KA.

Supply, fixing and connecting MCB, SP, 240 Volt, 16 Amps 'C' series 10 KA.

Supply, fixing and connecting MCB, SP, 240 Volt, 10 Amps 'C' series 10 KA.

Supply, fixing and connecting MCB, SP, 240 Volt, 6 Amps 'C' series 10 KA.

Supply, fixing and connecting MCB TP 415 Volt, 10 Amps 50 Hz 'C' series 10 KA.

M&L for Earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) connected to galvanized iron strip 25x4mm, 7.5 m long by means of bolts, nuts and washers of galvanized iron or steel, GI light grade protection pipe 15 mm dia, GI medium grade water pipe 20 mm dia with funnel all as shown in electric plate No 3 of SSR-2009 pt-I and testing complete including earth work excavating in any type of earth strata PCC 1:2:4 as in earthing pit, 50 mm PCC pit cover with 6mm iron handle attached , common salt charcoal all as specified including testing on complete. Note GI strip beyond 7.5 m shall be measured and paid for seprately.

M&L for Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc as required with 25 x 4 mm GI strip.

M & L for making holes by core cutting machine on stone/concrete / brick walls.Dia of hole not exc.20mm to 40mm and thickness of wall 50cm to 70cm for entry of suction and discharge pipes and making good distarbed surfaces with cement morter and finally finished with plaster of parise and painted the distrubed surfaces with existing type of paint and tint complete all as directed.

M&L for Point wiring with FRLSH grade1.5 Sq mm multi stranded insulated copper conductor single core PVC insulated cable 1100 volt including casing and caping for one light point controlled by one switches including PVC rectangular board open recessed cover with 3mm thick plastic laminated sheet cover incl PVC insulated 1.5 Sqmm copper conductor as earth wire for one light controlled by one switch complete all as specified and directed.

All as per item No 2.19 here-in-before but for 3-pin socket out let 5 Amps on independent board with continous PVC insulated copper conductor cable 1.5 Sqmm earth wire.

All as per item No 2.19 here-in-before for 3-pin socket out let 15 Amps on independent board with 2.5 Sqmm Multi std.copper conductor PVC insulated cable 1100 volts grade with continous continous 2.5 Sqmm earth wire.

S&F Switch socket combination 2-in-1 5 pin 5 Amps flush type (ISI Marked) complete all as specified and as directed by Engr-in-charge.

S&F Switch piano flush type 6 Amps single pole one way.

S&F Switch socket combination 5 in 1, 5 and 15 Amp flush type universal controlled by one switch (ISI Marked).

M&L for circuit main wiring 3x2.5 ( phase , neutral and earth) PVC insulated (heavy duty) 1100 volts grade, FRLS, with stranded copper conductor in & including PVC casing caping/conduit of suitable size not less than 25mm ( 3 run of 2.5 sqmm cable and one run of PVC casing caping/conduit will be measured as one unit) all as specified and directed (from distribution board to metal clad switch socket point)

S&F LED tube light fittings,1x40 W,240 V Energy efficient and connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed by Engr-in-Charge.

M & L for ceiling rose surface backelite with 3 terminal as per relevent IS

S & F Blanking plate complete all as specified and as directed.

SCH 'A' PART- II (EXTERNAL ELECTRIFICATION)

Supply laying in trenches or fixing on wall with shaddle and testing cable XLPE insulated screened, PVC bedded galvanized steel strip or wire armoured electric power cables (heavy duty) 1100, Volts grade with stranded aluminium conductor of size 50sqmm 3.5 core complete all as directed

Supply laying in trenches or fixing on wall with shaddle and testing cable XLPE insulated screened, PVC bedded galvanized steel strip or wire armoured electric power cables (heavy duty) 1100, Volts grade with stranded aluminium conductor of size 35 sqmm 3.5 core complete all as directed

Excavation in trenches n. exc.1.5 m wide and not exc 1.5 m in depth for laying of pipes, cables or for fixing poles and stays /tower (where provided for protection of cable) and getting in soft / loose soil required level complete all as specified and as directed by Engineer-in-Charge.

M & L for sand cushioning to electric cable with clean dry river sand 8 cm thick layer before laying of cable in trenches and 15 cm thick after the cable is laid in trenches/cable ducts for cable protection complete all as specified and directed.

M&L for proving burnt clay modular fly ash bricks for protection of under ground electric cables, laid flat in trenches, abutting each other perpendicular to the direction of cable complete all as specified and directed.

SCH 'A' PART- IV (PLANT ROOM EQUIPMENT) : Supply, Installation, Testing and commissioning MEDICAL AIR SYSTEM including following items :- Note : The work of medical gas pipe line system to be executed only from the specialised firm having sufficient experience in the field and as approved by GE.

S&F Oil Free Air Compressor 2 stage Double Cylinder with Composite Resin Pistons, delivering maximum of 22.93 CFM @ 8.5 Kg/cm2 pressure, including 5hp/415V motor.100% Oil free complete all as specified and as directed.

S&F Air Dryer 45 cfm at 7 kg/cm2 working pressure with pre filter and by pass arrangement.Maximum Operating Pressure : 16 kg/cm2(g) complete all as specified and as directed. Air Inlet Temperature : 380C Max Operating Pressure : 7 kg/cm2(g) Pre-Filter Rating : 0.01 Micron Cycle Time : 4 Minutes Operating Voltage : 100-240 V AC 50/60 Hz 1 Ph Outlet Conditions : Dry air at -400C PDP* Purge Loss : 15±1% including following makes. * ISO:8573-1:2010 (E) class -2.

S&F 3 Stage Breathing Filter oil filter, dust filter, activated carbon filter Each filter should be fitted with differential pressure gauges to monitor filter performance complete all as specified and as directed.

Plant Room Components - Arranged Locally: i) S & F Duplex pressure regulating system should have Pressure regulator, Isolation valve, Pressure indicator for Medical Air regulation with an by pass arrangement. Which includes 4 Nos of isolation valve, 2 nos of regulators, 2 nos of pressure indicator. ii) Receiver Tank - 1000 lits - 1nos. Pressure Gauge, Pressure Sensors, Safety Valves, Auto Drain Valves to be fitted on receiver tanks complete all as specified and as directed.

S&F PLC Control Panel for Medical Air Compressors & Vacuum Pump with timed functioning / cascading of compressors with display of status & alarm signals. (Basic System) complete all as specified and as directed.

Supply, Installation, Testing and commissioning MEDICAL VACCUM SYSTEM including following items:

Vacuum Pump Model 5 HP Motor complete with electrical fittings and mounting arrangement complete all as specified and as directed.

Medical Vacuum System Components - S & F medical vacuum system Comprising of: Bacteria Filters - 2nos, interconnecting pipes, NRV, Exhaust silencer, Pressure Gauge & Pressure Sensors, isolation valves & piping complete.Receiver tank – 1000 liters x 01 complete all as specified and as directed.

Supply, Installation, Testing and commissioning OXYGEN MANIFOLD SYSTEM Main Building including following items:

S&F Oxygen Manifold 10+10 along with centre frame NRV,Tail pipes etc marked, Conforms to BS EN ISO 7396 - 1 :2007, NFPA 99 : 2005, Type 1, HTM 01-02 complete all as specified and as directed.

S&F Semi Automatic Control Panel for the Oxygen. 1500 LPM capacity Complies and meets with HTM02- 01/NFPA99/ISO 7396-1 complete all as specified and as directed.

Supply, Installation, Testing and commissioning OXYGEN MANIFOLD SYSTEM MI ROOM including following items:

S&F Oxygen Manifold 1+1 along with centre frame NRV,Tail pipes etc marked, Conforms to BS EN ISO 7396 - 1 :2007, NFPA 99 : 2005, Type 1, HTM 01-02 complete all as specified and as directed.

S&F Oxygen Regulator Single Stage Twin Guage complete all as specified and as directed.

Supply, Installation, Testing and commissioning NITROUS-OXIDE MANIFOLD SYSTEM including following items:

S&F Nitrous-oxide Manifold 2+2 along with centre frame NRV,Tail pipes etc marked, Conforms to BS EN ISO 7396 - 1 :2007, NFPA 99 : 2005, Type 1, HTM 01-02 complete all as specified and as directed.

S&F Nitrous-oxide Emergency 1 Cylinder complete all as specified and as directed.

S&F Nitrous-oxide Regulator Single Stage Twin Guage complete all as specified and as directed.

S&F Pipeline & all required necessary Accessories BS / DIN Type Gas Outlets For Wall / BHP / Pendants - Front Loading for following items:

S&F Oxygen Gas Outlet complete all as specified and as directed.

S&F Nitrous-oxide Gas Outlet complete all as specified and as directed.

S&F Medical Air Gas Outlet - 4 Bar complete all as specified and as directed.

S&F Vacuum Gas Outlet complete all as specified and as directed.

S&F Copper Pipe for distribution of medical gases i. e. oxigen, Nitrogen, Oxide, Air and vaccume as per suitable colour code including SS saddles clamps of suitable size, fitting like Tee, Bends, Reducers etc. and all connected items & necessarynwelding works for fixing of copper pipe as per BS EN 13348:2001 standard alongwith third party inspection certificate from Lloyds' complete all as specified and as directed for following size of items :

S&F 12 mm OD x 0.7 mm thick

S&F 15 mm OD x 0.9 mm thick

S&F 22 mm OD x 0.9 mm thick

S&F 28 mm OD x 0.9 mm thick

S&F Isoaltion Ball Valves with Brass adapters for area / regional isolation complete all as specified and as directed for following bore size :

Digital Gas Alarms For OT & ICU

S&F 3 Gas with digital display complete all as specified and as directed.

S&F 4 Gas with digital display complete all as specified and as directed.

Gas Accessories

S&F BPS Flow Meter With Humidifier bottle For Oxygen complete all as specified and as directed.

S&F Ward Suction Unit 600 ml Jar with regulator for Vaccum complete all as specified and as directed.

S&F Hose connection Probes For Oxygen, Nitrous,Air-4 & Vacum For BPC, Ward vacum Unit, Ventilators & Anesthesia W/s complete all as specified and as directed.

S&F Low Pressure Tubing for Ward / ICU suction units complete all as specified and as directed.

S&F Hanging Support- Threaded rod, Fastner, C-channel patti & Saddle / Mansoon Ring with fastners & threaded Rods complete all as specified and as directed.

S&F Theatre Suction Trolley with 2 x 2000ml Collection Jars for Vaccum

Bed Head Panels - S & F Metal Enclosures with Powder coating for following items complete all as specified and as directed.

Type A For ICU, OT, post and preoprativemroom and Accidential Trauma care beds - Provision for - 4 Gas Points, 4 electrical sockets, 1 nurse call socket, 1 RJ45 socket complete all as specified and as directed.

Type B For Ward beds - Provision for - 3 Gas Points, 4 electrical sockets, 1 nurse call socket, 1 RJ45 socket complete all as specified and as directed.

Horizon Construction