8229 SPECIAL REPAIRS TO BLDG NO LH-24 AT ANATOMY DEPT OF AFMC AND SPECIAL REPAIRS TO RCC ROOF SLAB AT BLDG NO P-167 AT AFMC UNDER GE (CENTRAL) PUNE

Amount

Demolition of RCC (Other than ground floors), beams, staircases, landing, chajjas, cylinderical / circular/ rectangular water tank and similar suspended work and removal of debris outside of MD land as directed by Engr-in-Charge.

Demolition of PCC of any description and in any position on roof slab as in padding/mud phuska etc complete and removal of rubbish off the premises all as and directed.

Dismantling timber scantlings in framed work 40 sq. cm and over in section, in any position complete and removal from site all as directed.

Dismantling timber scantlings in fillets, rails, posts, rafters, purlins, etc. in framed work, under 40 sq. cm in sectionand removal from site all as directed.

Dismantling timber boarding, any description, fixed in any position with nails or screws complete and removal from site all as directed by Engr-in-Charge.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc and removal of rubbish off the premises complete all as directed.

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete and removal from site all as directed.

Taking up or down carefully 20 mm dia steel tubing and connections including removal from site complete all as specified and directed.

Taking down carefully wooden benches in any position fixed with nails/ screws and refixing in same position all as directed by Engr-in-Charge.

M & L PCC 1:2:4 type B2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified & directed.

M&L for PCC 1:2:4 type BO using 12.5 mm graded agg as in PCC padding in roof kerbs or mud stops, rounded and chamfered on edges and on chajjas laid over RCC surface finished even and smooth without using extra cement including mixing ofwater proofing compound @ 3% by wt of cement or as per manufacutrer's instructions complete all as specified and direceted . (Note: WPC shall be measured and paid separately)

M & L for II nd class hard wood boarding in floors, 40 mm thick, , planed one side with butt joints, fixed with screws in any situation complete all as specified and directed.

All as per item No. 12 above but fixing only boarding.

M & L 2nd class hardwood Plain fillets square, rectangular or triangular in section,sectional area exc 13 but not exc 25 sqcm, clean sawn, secured with screws etc complete all as specified and directed.

M & L 1st class hardwood Moulding as in cornices, picture rails and the like fixed with screws, sectional area exc 13 but not exc 25 sqcm etc complete all as specified and directed.

S & F Rolled section as in main and cross beam, hip and jack rafters, purlins where connect to common rafters and running rails,support fixed with angle cleats or other connection plates Fe 410-W (Gde E 250) quality A including necessary welding etc complete all as specified & directed.

"M & L for water proofing treatment to RCC roof slab, walls, chhajjas etc as specified below and as directed by Engineer-in-Charge including taking down old bituminous felt with cement screed bed complete. (a) M&L for 10mm thick screed bed in CM 1:3 mixed with and including water proofing compound as per manufacturer's instruction on concrete surfaces. (b) Preparing plastered surfaces of roof slab, walls, chajjas etc, by brooming with broom sweeping free from dirt dust etc & applying a coat of approved bitumnous primer @ 0.70kg/Sqm of area complete all as specified. (c) Laying App polymer modified approved membrane, non woven, polyester, weighing not less than 3.6 kg/Sqm and 3 mm thick with laps & overlaps as specified & joints sealed and applied complete by torch application method all as specified & directed by Engr-in-Charge. Carrying out test by flooding water for 24 hrs for leakage & seepages to the entire satisfaction of GE. (d) Finally applying a coat of solar reflective bituminous aluminium paint @ 0.15 ltr/Sqm on the top of membrane surfaces complete all as specifed & as directed."

"M & L for water proofing treatment to RCC roof slab, walls, chhajjas etc as specified below and as directed by Engineer-in-Charge including taking down old bituminous felt complete. (a) Preparing plastered surfaces of roof slab, walls, chajjas etc, by brooming with broom sweeping free from dirt dust etc & applying a coat of approved bitumnous primer @ 0.70kg/Sqm of area complete all as specified. (b) Laying App polymer modified approved membrane, non woven, polyester, weighing not less than 3.6 kg/Sqm and 4mm thick with laps & overlaps as specified & joints sealed and applied complete by torch application method all as specified & directed by Engr-in-Charge. Carrying out test by flooding water for 24 hrs for leakage & seepages to the entire satisfaction of GE. (c) Finally applying a coat of solar reflective bituminous aluminium paint @ 0.15 ltr/Sqm on the top of membrane surfaces complete all as specifed & as directed."

M & L for 12 mm thick Plywood, grade BWP, type BB fixed with screws to timber frame work including 1.5 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions and as direceted.

M&L for 9 mm thick Gypsum ceiling board for ceiling perforated finish, 600 x 600 mm in size, of approved brand/make, laid over and including grid work of size 600 x 600mm, made out of 0.5mm thick G.I. tee 32 x 24 mm for main, 25x24mm for cross tee and 20 x 20mm angle fixed on wall, powder coated finish on exposed faces of tee and angle. hung from ceiling using 2 mm thick G.I. Suspension wires spaced at 1200 mm on main runners including making niches for fans/light all as specified and directed.

M & L for Rendering 15mm thick in cement mortar 1:6 on brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

Material and Labour for rendering 15mm thick in cement mortar 1:4 on concrete surfaces finished even and smooth with spong finish complete all as specified and directed.

Supply only integral water proofing compound ISI marked complete all as specified and directed.

M & L preparation of new plastered surfaces of wall and applying two coats of oil bound distemper over 2 mm thick wall care putty complete all as specified and directed.

M & L for Wooden boarding any size and spacing, prepared and treated with two coats of creosote oil (measured overall on one side only) all as specified and directed.

M & L for preparation of new or previously untreated surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer to newly wood surfaces complete all as specified and directed.

M & L for preparation of new steel surfaces of any description , over 10 cm in width or girth , not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified & directed.

M & L Cutting holes not exc 150 Sqcm each into brick / stone / PCC block masonry walls built in cement mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required complete all as specified and directed.

S&F 20 mm bore GI tubing "medium grade" galvanized with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and direceted.

S&F 1000 litres capacity rotational moulded polythelene water storage tanks (cylinderical vertical with closed top) double layered including 20 mm bore PTMT ball valve with epoxy coated aluminium rod and plastic ball complete hoisted and fixed in position all as specified and directed.

S&F 20 mm bore gun metal globe or gate valvves with iron wheel head, screwed both ends for iron pipe of ISI marked complete all as specified and directed.

Supply and fix LED Tube light fittings wall mounted, 18 W LED 6500K with Opal white Poly Carbonate diffuser provided with high efficient integral constant current LED Driver 230 V etc. complete with mounting batten including all accessories internally pre-wired and connecting up with twin core twisted flexible copper conductor cable with suitable size from ceiling rose to connector including taking down old us light fittings. Conforming to Cat Part No. BLRB DB 118 & BLRB18 W CW LED Make :- Bajaj or Equivalant model in Philips/Havell's.

S & F LED light fittings 2'x2', 28 watts environmental friendly, new genereation, aesthetically designed, ultra modern recess mounting luminaire with high brightness SMD LEDs as light source 230 volts with all accessories internally pre wired and necessary mounting arrangements including taking down old us light fittings, complete all as specified and as directed. Make :- HAVELLS Cat part No. PLUTONEO2X2PLR28WLED840S 28W or equivalent model in Philips/Bajaj.

greenstone construction

TRINITY ENGINEERS

TULSAYA CONSTRUCTION

Raj Construction Company

Vijay Construction and Company

ELIEYAS TRADERS

Suma Construction

SARATH ENTERPRISES

KSP ENTERPRISES

GRACE CONSTRUCTIONS

Mourya Construction