Mandala Community Centre Anushaktinagar Mumbai

Amount

ABSTRACT OF COST

CIVIL WORKS

PUBLIC HEALTH ENGINEERING WORKS

ELECTRICAL WORKS

FIRE FIGHTING WORKS

HVAC WORKS

Description of Work / Item(s)

Amount

PART V : HVAC WORKS

VRV/F System

VRV/F Outdoor Units Design, manufacturing, supply, installation, testing & commissioning of air cooled VRV/F outdoor units working on R-410 A/CFC Free refrigerant. The system shall be suitable to operate on 3 phase, 380-415 V, 50 Hz AC supply and shall comprise of all inverter based scroll compressors, conforming to the technical specification. The outdoor units of VRV/F system should be compatible with RoHS Directive. It should be compatible with all type of indoor units like cassettee units, Hi-wall units, False ceiling mounted units, TFA units, floor mounted units etc. The outdoor units should consist of VRV/F combination as per manufacturer std. air cooled condenser with each unit comprising 2 or 3nos High COP Compressors of which all should be a Variable Speed Scroll compressor, condenser fans which have high external static Pressure of upto 78.4Pa with fan grill, fan motor & controls.

The Outdoor units should also include microprocessor control panel, internal control and power wiring, internal interconnecting refrigerant pipes, charging ports, system required standard refrigerant charge, high efficiency heat exchange coil, oil seperator, accumulator and all other required accessories, hardwares shall be enclosed in a single enclosure(s). The entire unit shall have weather resistant powder coating paint for withstanding all ambeint conditions for continous operation and the units shall operate at lower noise levels of approx. 70 dB(A). It shall have ease of maintenance by incorporating Automatic Test Function, Memory Function for operational data and centrally controlled as per cooling zones. The system shall be compatible for microprocessor control by being connected with a separate corded central controller for each cooling zone or set of indoor units for informations and controls such as a) operating condition of indoor units, b) zone control, c) Malfunction code display, d) Airflow volume & direction control, e) Ventillation volume & mode control.It shall be further connectable with unified ON/OFF Controller, Schedule Timer and BMS System. This shall include all hardware and necessary inbuilt softwares complete in all respects as per the drawings

Note : 1) The VRV/F shall have incoming power MCCBs/MCBs as per VRV/F unit control panels specifications. 2) The individual PCB should be microprocessor based as compatible for operation from remote controls with all hardwares, software and accessories complete in all respects. 3) Outdoor units shall be with anti-corrosion treatment and all nuts, bolts, fastners etc. shall be hot dip galvanizesd steel. 4) Testing, commissioning of VRV/F systems shall be included by the bidder in the scope of the work. All the consumables including refrigerant and oil for the proposed VRV/F system shall be under the scope of the bidder. The topping shall be done for any leakage during testing & commissioning of refrigerant (R-410 A/CFC free). 5) The ODUs shall be placed on supports as shown in the drawings and no separate payment shall be made for the same.

50 HP (Comprising of Two 16 HP and One 18 HP ODUs) Note: This item includes provision of a Weather proof hood fabricated of 5 mm. thick UV stabilised FRP sheet with M.S frame support made of M.S Angle of 60 mm x 60 mm x 8 mm, above each VRV ODU to protect it from weather & the provision of RCC support as shown in the drawings and no extra payment shall be made for the same. All works shall be as tender documents as well as the instructions of the Engineer In Charge.

Cassette Type (Round Flow) Indoor units : Design, manufacturing, supply, installation, testing & commissioning of following air cooled VRF/VRV type all directional round flow DX split ceiling mounted cassette type indoor air conditioning unit of following capacity for mounting inside false ceiling confirming to the technical specification of VRF/VRV system and compatible with above Outdoor units. It should comprise of cooling coil, blower with multi speed motor, electronic expansion valve, supply & return air grilles, filters, insulated connection of refrigerant circuit, condensate water drain pump with electronic level sensor including cordless remote controllers & installation from ceiling with all required supports, anchor fastners hardwares, interconnecting refrigerant copper piping, support etc. All as per technical specifications and instructions of Engineer-in-charge.

Refrigerant piping Design, Supply, installation, testing & commissioning of the insulated refrigerant piping between outdoor unit to indoor units as per the manufacturer standard. The insulation shall be of 19 mm/25 mm (depending on pipe size) thick Nitrile rubber class O through out the running length of suction refrigerant piping. The piping shall be laid in shaft, walls/roof/ceiling well supported at specific intervals with wooden batten / mettallic supports and screwed with anchor fasteners for the following sizes of refrigernat piping. The piping laid in open to sun light is to be provided with anti-sun rays coating and the pipes are to be covered with 22 SWG GI ducting suitably and with easy removal facility. All refrigerant pipng shall be covered with 26 G Aluminum cladding. All the refrigerant pipelines in terrace shall be installed on MS hot dip galvanized Tray.

Refrigerant pipe of size 44.5 mm

Refrigerant pipe of size 41.3 mm

Refrigerant pipe of size 28.6 mm

Refrigerant pipe of size 22.2 mm

Refrigerant pipe of size 19.1 mm

Refrigerant pipe of size 15.9 mm

Refrigerant pipe of size 12.7 mm

Refrigerant pipe of size 9.5 mm

Refrigerant pipe of size 6.4 mm NB: 1.) The sizes of pipes shown in the drawing (for both VRV system as well as air cooled condenser system) are tentative only, the sizing calculation & drawing of refrigerant pipes shall be submitted by the agency which shall be duly certified by OEM prior to taking up the execution. (Payment for insulated copper pipes between air cooled condensing units and AHUs shall be made under this item). 2.) The rate of this item also includes provision of M.S Hot Dip Galvanized tray, 26 G Aluminium cladding and 22 SWG GI ducting covers for all the insulated refrigerant pipes(VRV/F, Condensing Units, AHUs and Split AC Units) installed in the terrace along with M.S Angle tray supports fabricated out of 50 mm x 50 mm x 5 mm Thk angles as instructed by EIC and no extra payment shall be made for the same.

Refrigerant joints Supply, installation, testing & commissioning of refrigerant joints from VRV/F manufacturers for VRV/F system as per specifications and instruction of EIC. It should have minimum three connections (one inlet and two outlets). Each refrigerant joints sets should form combinedly of suction and discharge line i.e. two nos. of refrigerant joints per set.

uPVC Drain Piping for Indoor units Design, supply, installation, testing & commissioning of drain piping consisting of Sch. 40 uPVC pipes (pressure rating - 10kg/sq.cm) and insulated with 13 mm Thk. tubular nitrile rubber insulation of following sizes insulated with 9mm nitrile rubber of class O with necessary accessories and adequate supports as per drawings and specifications.

Communication cables Supply, laying, testing & commissioning of stranded copper 2C x 1.5 sq.mm screened sheilded communication cabling to have interface between outdoor units / controller to individual indoor units, including clamping and supporting as per standard specifications.

PVC Conduit Supply, Installation, testing and commissioning of PVC Conduit of 100 mm x 50 mm for the purpose of housing insulated copper piping and control as well as communication cables between ODUs and IDUs, as per drawings and as instructed by Engineer In Charge.

Central Remote controllers Supply, installation, testing & commissioning of central remote controller as per specification corded controller for each coolig zone / floor to perform the following for Indoor units on each floor; A) Temperature of air in the room / area served by indoor units. B) Indication of no. of indoor and outdoor units working. C) ON/OFF condition of indoor units. D)Malfunction code display. E) Airflow volume & direction control. F) Ventillation volume & mode control. Provision of necessary UPS and cabling, etc, if any shall be included in the scope of the item.

Airhandling Unit and Condensing Unit System

Air Handling Units Design, manufacturing, supply, installation, testing & commissioning of Horizontal floor mounted double skinned AHU with minimum 4 row DX Cooling coil and of sectionalized construction comprising of Mixing Box, Coil Section, Fan Section and discharge air section and Electric Strip Heater bank /Single Heater having 18 KW of heating capacity. The AHU shall also comprise of refrigerant connection circuits, drift eliminators, SS condensate water drain pan made of 1.2 mm thk SS sheet, Face and Bypass Dampers, damper actuators, return air temperature sensor etc. The AHU shall be assembled with pre air filters, centrifugal blower fans with energy efficient IE-3

drive motors etc. all including outdoor cabling, earthing, control wiring, interlocking with power units. The double skinned Sandwich insulated panels shall be with extruded aluminium structural frame work with Thermal break Profile with casted polyamide / aluminium corner / intermediate connecting pieces. The Panels shall be filled with Min. 43 mm PUF insulation. The Panel Outer Skin shall be 0.8 MM Thick GSS sheet with scratch free pre-coated / powder coated sheet and inner Sheet shall be Plain GSS sheet of 0.8 MM Thick. The Blower shall be made of powder coated, backward curved, aerofoil type impeller. The Blower & motor shall be provided with Anti-vibration mountings along with the suitable foundation frames. The AHU shall be included with Air tight service doors to AHU's & plenum sections. Metallic flexible folded bellow connection shall be provided on the discharge side. All the equipment required to put the AHU into operation shall be included with this item and no extra payment will be made for the same. All shall be as per tender specifications, drawings and as instructed by the Engineer In Charge.

13200 CFM @ 50 mm St.Pr and 33 TR Cooling Capacity

Air Cooled Condensing Units Supply, Installation, Testing and Commissioning of air cooled condensing units of the following capacity along with all the necessary thermostat, expansion valves, fittings, accessories and as per tender specifications.

33.0 TR Note: 1.) This item includes provision of a Weather proof hood fabricated of 5 mm. thick UV stabilised FRP sheet with M.S frame support made of M.S Angle of 60 mm x 60 mm x 8 mm, above each Air Condensing unit to protect it from weather & the provision of RCC support as shown in the drawings and no extra payment shall be made for the same. All works shall be as tender documents as well as the instructions of the Engineer In Charge. 2.) The sizing calculation & drawing of refrigerant pipes shall be submitted by the agency which shall be duly certified by OEM prior to taking up the execution. Payment for insulated copper pipes between air cooled condensing units and AHUs shall be made under item 1.3.

GI Ducting Supply, fabrication, installation, testing and commissioning of GI ducting of following sizes for supply from AHU and Kitchen Ventilation ducts complete with turning vanes, access doors, supports etc. as per drawing and specifications.

22 SWG GI of 180 GSM (for AHU Ducting)

20 SWG GI of 180 GSM (for AHU Ducting)

Insulation

Thermal Insulation Supply, installation, testing & commissioning of 25 mmclosed cell nitrile rubber thermal insulation with black glass cloth and of class O for AHU's G.I ducting as per specification. The ducts shall be pre cleaned before applying a thin film of manufacturers recommended adhesive. All joints shall be air tight and sealed with aluminmum tape.

Acoustic Insulation Supply,installation,testing & commissioning of 15mm thick acoustic open cell nitrile rubber insulation for supply ducts upto 3 meters from AHU, all as per specifications and instructions of Engineer In Charge.

M.S Drain Pipe and G.M Gate Valve

Design, supply, installation, testing & commissioning of Medium Class M.S drain piping of 50 NB and insulated with tubular 9 mm nitrile rubber of class O with necessary accessories and adequate supports as per drawings and specifications.

G.M Gate Valve Supply, installation, testing and commissioning of heavy pattern screw down Gun Metal Gate Valves of 25 NB confirming to Class 2 of IS : 778 with hand wheels at top including testing for a pressure of 16 kg/sq.cm. for two hours, all as per specification, drawings and as instructed by Engineer-In-Charge.

Volume Control Dampers Supply, installation, testing and commiossioning of opposed blade type multilouvered volume control dampers with body frame fabricated out of extruded Al section and blades fabricated out of aerofoil Al section. Gear or Linkage mechanism shall be provided for blade operation. The size of various dampers shall be as per ducting drawings and site requirements. The size of discharge dampers of air handling units shall also be as per AHU room drawings and cost of these dampers shall be paid under this item. It shall be complete in all respects as per the technical specifications, drawings and as instructed by Enginer In Charge.

Fire Dampers Supply, Installation, Testing and Commissioning of Motorised Fire Dampers in supply and return air ducts along with suitable actuator and control panel. In case of fire the damper acutator shall close and it’s position indicator shall indicate the position of the damper whether it is open or closed. The damper shall also be provided with feature that allows it to be opened and closed manually.

Fire Dampers with Fire & Smoke Sensor.

Motorized Actuators with Control Panel & Wiring.

Air Supply and Exhaust Diffusers Supply, Installation, Testing and Commissioning of Powder Coated Extruded Aluminium diffusers with volume control dampers, mounting frame, fitting arrangements and accessories as required. It shall be complete in all respects as per technical specifications, drawings and as instructed by Engineer In Charge.

FRESH AIR LOUVERS Supply, installation, testing and commissioning of Aluminium powder coated rain protection louver damper of required size facricated out of min. 22 SWG Al Sheet for blades and min. 20 SWG AI Sheet for the frame along with bird screen for fresh air.

Dummy Diffusers Supply, Installation, Testing and Commissioning of Powder Coated Extruded Aluminium dummy diffusers in the false ceiling. It shall be complete in all respects as per tender drawings and as instructed by Engineer In Charge.

KITCHEN VENTILATION

SUPPLY & EXHAUST BLOWERS Supply, Installation, Testing and Commissioning of SISW centrifugal blowers of capacity 10000 CFM at 30 mm static pressure along with SS bird screen, flexible metallic canvas connections, drive arrangement including required foundations and all accessories, high efficiency TEFC Motor & Starter, control wiring, power cable terminations etc. as per drawings, technical specifications & instructions of Engineer-in-charge.

KITCHEN HOOD SITC of SS Kitchen hood made out of 18 SWG sheet along with grease filters and oil drain facility with adequate supports from the slab and/or from the floor, having air flow capacity of 10000 cfm, complete in all respects as per Clause 8.0 of Section 2 of technical specifications, drawings and as instructed by Engineer-In-Charge. NB: 1) The cost of grease filters along with drain arrangement shall be included under this item and no extra payment shall be made. 2) However, the cost of supporting arrangement shall be paid under Item of (M.S. Structure) of PART C 'Split Ac System & Air Curtains' of this document.

FILTER BANK Fabrication and supply of M.S filter bank along with 4 Ply HDPE Pre-filters (6 Nos.) of size 610 mm x 610 mm x 305 mm, filter frame fabricated out of MS Angle/Channel/I-Section for housing Pre-filters. The filter bank casing shall be fabricated out of 3 mm thick M.S Sheet as per Clause no. 8.0 of section 2 of technical specifications, drawing and as instructed by Engineer-In-Charge.

TOILET AND WASHROOM VENTILATION

Exhaust System for Ladies & Gents Toilets :- Supply, Installation, Testing and Commissioning of Inline Exhaust Fans of capacity 2500 CFM at 35 mm static pressure along with SS bird screen, flexible metallic canvas connections, drive arrangement including required foundations and all accessories, high efficiency TEFC Motor & Starter, control wiring, power cable terminations etc. as per drawings, technical specifications & instructions of Engineer-in-charge.

Exhaust System for Ladies & Gents Wash Rooms:- Supply, Installation, Testing and Commissioning of Inline Exhaust Fans of capacity 1000 CFM at 25 mm static pressure along with SS bird screen, flexible metallic canvas connections, drive arrangement including required foundations and all accessories, high efficiency TEFC Motor & Starter, control wiring, power cable terminations etc. as per drawings, technical specifications & instructions of Engineer-in-charge.

Wall Mounted Exhaust Fans of Fractional HP Motors and with Galvanised Louvers

Split Acs

Supply, installation, testing and commisioning (SITC) of Hi-Wall Split Type A/C with minimum 2 TR nominal cooling capacity suitable for 230 V, 50 Hz, single phase AC supply consisting of tubular blower, fan motor, DX cooling coil, filter,ABS fire retardant as body material for indoor unit, control and power panel , supports etc, on/ off timer with advance startup, high capacity compressor, cordless remote control, including pressure testing , air purging using vaccum pump, charging the system with R-410A/CFC free refrigerant as per installation manual for smooth operation of AC’s and as per technical specification and as instructed by E.I.C.

Supply, installation, testing and commisioning (SITC) of all direction round flow Cassette Split Type A/C for mounting inside false ceiling and with minimum 2 TR nominal cooling capacity suitable for 230 V, 50 Hz, single phase AC supply consisting of blower, fan motor, DX cooling coil, filter, condensate water drain pump, ABS fire retardant as body material for indoor unit, control and power panel, installation from ceiling, supports etc, on/ off timer with advance startup, high capacity compressor, cordless remote control, including pressure testing , air purging using vaccum pump, charging the system with R-410A/CFC free refrigerant as per installation manual for smooth operation of AC’s and as per technical specification and as instructed by E.I.C. Note:- Rate for Split Acs includes all required copper piping, fire resistant 19 mm Thk. Nitrile rubber thermal insulation of Class O, control and power cabling, PVC Conduit of 100 mm x 50 mm for carrying the copper piping, cabling etc. inside it, charging with refrigerant and drain piping, M.S and PCC supports for the outdoor units as shown in the drawings, all as per technical specifications, drawings and instructions of Engineer In Charge.

GI Sleeves Supply, fabrication installation and comissioning of GI pipe sleeves of following sizes for refrigerant pipes, condensate drain pipes wherever they pass through the walls as per drawing and instruction of Engineer In Charge.

PART - B : Electrical works

LT PANEL Supply, installation,testing & commissioning of Electrical panel, powder coated floor mounting,front operated acess cubicle type, totally enclosed, with IP-42 protection with hinged and back acess doors. It shall be fabricated from 2mm thick CRCA sheets including interconnections, tinned copper crimping lugs, bonding to earth, suitable for use at 415 V, 3 phase 50 Hz system and suitable for a fault level of 35 KA symmetrical at 415 V complete as per specification, instruction & approval of E-I-C as below : All switch boards shall have provision for entry of cables from the top/bottom as required as per site conditions. All live accessible parts shall be shrouded and all equipment shall be finger touch proof. The bus bars insulation shall be with heat shrinkable sleeves. SMC/DMC shrouds and busbar supports shall be used.

j) G.A. & detailed fabrication drawing and short circuit forces and temp rise calculation for panel shall be submitted for dept's approval. k) Bimetallic washers shall be used for all aluminium to copper joints & it shall be of approved make & quality. l) Indication lamps shall be heavy duty cluster type LED. m) All Outgoing feeders shall have 'ON' & 'OFF" indication lamps. n) All neutrals shall be isolatable type. o) Power cabling between motor and starter shall be measured separately. However, any other control / power wiring / cabling, if required for automation etc shall be in the scope of this item. p) All the MCCB shall be with overload and short circuit thermal magnetic release. q) The cable entry shall be from the top/bottom as per approved GA/GTP drawing and EIC instruction r)The panel shall be installed on the ISMB100mm support on the trench and necessary MS support structure shall be included in the panel scope

READYMADE DISTRIBUTION BOARDS Supply, installation, testing & commissioning of following readymade distribution boards, double door, IP 42 degree protection complete with necessary, MCBs,Residual Current Circuit Breaker (RCCB) etc including interconnections with appropriate capacity size of FRLS insulated copper conductor wires (ISI marked),suitable for concealed mounting /wall mounting with MS frame work of 40 x 40 x 5 mm MS angle iron, with M.S. enclosure fabricated out M.S. CRCA sheet as per manufacturers standard. With concealed hinged door, locking arrangement etc. including earthing clamps for both incoming & outgoing circuits, interconnections, per phase isolation kit as required,cable end box & wire way box if required, continuous copper earth wire in the wire way box with single/duplicate brass earthing terminals, danger board, name plate, flexible earthing for the door, metal treatment & powder coated, Phase Distribution drawing etc. all as per drawings (G.A. & fabrication drawing to be got approved), etc. relevant IS & instruction of Engineer-in-charge.

Notes:(1) MCBs (Type –C/D) shall be minimum 10 kA breaking capacity, as specified. (2) Blanking Plates shall be included in scope of work. (3). DB shall be of standard readymade type as per catalouge No. from approved manufacturers as indicated in preferred makes of material.

Lighting DB: a) 40 A FP MCB - 1 No. b) 6 A -32 A SP MCB -- 12 nos c) 40 A,2 pole RCCB with 30mA sensitivity- 3Nos. d) 16 way brass neutral link -- 4 Sets.

LT CABLES Supply, installation, testing & commissioning of 1.1 KV grade Cu armoured cable for Outdoor units on Wall/Cable tray XLPE insulated, extruded PVC inner sheath, extruded PVC outer sheath with FRLS and antirodent termite repellent properties, GI strip / wire armoured, power cable confirming to IS 7098 part-1 with upto date amendments, fixed on cable tray (measured as separate item) all fixing accessories, etc. complete with painting of M.S spacers/angles and saddles all as per enclosed detailed specifications, drawings & as per instructions of the E-I-C. The space between two supports shall be 600 mm. approximately.

3C x 25 sq. mm. Cu

3C x 16 sq. mm. Cu

3C x 10 sq. mm. Cu

3C x 4 sq. mm. Cu

END JOINTS End jointing of Cu. Stranded cable by crimping with supply of all jointing materials like solderless tinned copper cable socket, cable glands, gland earthing, insulation tape, flux, duplicate interconnection between gland earthing strip & to the nearest earthing bus terminals as per the drawings, specifications and as per the instructions of the Engineer-in-charge.

3C x 25 sq. mm. Cu

3C x 16 sq. mm. Cu

3C x 10 sq. mm. Cu

3C x 4 sq. mm. Cu

CABLE TRAY Supply & fixing of ladder type GI cable trays of following size with vertical sides on both ends and suitable MS supports including concrete bolts, hold fast etc. The scope includes supply of readymade bends, reducers,Tee, covers etc. as required as per instructions of EIC.

300 mm (W) x 100 mm (D) x 2 mm (T)

100 mm (W) x 50 mm (D) x 2 mm (T)

50 mm (W) x 50 mm (D) x 2 mm (T) Note: Scope includes provision of M.S Angle tray supports fabricated out of 50 mm x 50 mm x 5 mm Thk angles as instructed by EIC and no extra payment shall be made for the same.

Earthing System: Supply, Installation, testing and Commissioning of 25 mm x 3 mm GI strip fixed to wall/side of trench/ slab/column/beam/shaft with 5mm thick G.I spacers & GI saddles, G.nuts and bolts, G.I fasteners or on existing cable tray along with all required accessories etc.

Description of Work / Item(s)

Amount

ABSTRACT FOR PART I : CIVIL WORKS

PART IA : SUB-STRUCTURE

PART IB : SUPER-STRUCTURE (STRUCTURAL)

PART IC : FORM WORK

PART ID : STEEL REINFORCEMENT WORK

PART IE : MASONRY WORK

PART IF : FLOORING WORK

PART IG : DOORS AND WINDOWS

PART IH : FITTINGS AND FIXTURES

PART II : WATERPROOFING TREATMENT

PART IJ : PLASTERING WORK

PART IK : PAINTING WORK

PART IL : MISCELLANEOUS WORK

PART IM : DEVELOPMENT WORKS

Description of Work / Item(s)

Amount

PART I : CIVIL WORKS

PART I-A : SUB STRUCTURE

In all soil other than soft and hard rock

In soft rock

In hard rock by chiselling or by using machine such as poclain with jack hammer etc.

Depth not exceeding 1.5 m from ground level

Depth exceeding 1.5 m & up to 3.0m from ground level

Depth exceeding 3.0 m & up to 4.5m from ground level

Depth not exceeding 1.5 m from ground level

Depth exceeding 1.5 m & up to 3 m from ground level

Depth exceeding 3.0 m & up to 4.5m from ground level

Depth not exceeding 1.5 m from ground level

Depth exceeding 1.5 m & up to 3 m from ground level

Depth exceeding 3.0 m & up to 4.5m from ground level

Construction of cast-in-situ RCC bored piles using rotary drilling method as per IS 2911 (Part-1, section-2) latest revision using concrete of M-30 grade with minimum cement content of 400 kg/cum of concrete, including cost of all materials, labour, use of plant and machinery, casting of pile to plumb, rectifying defects if any, including empty boring if any, breaking pile heads, dewatering, bore hole stabilization using temporary casting/ bentonite, disposal of the excavated muck/ bentonite slurry, broken pile heads to suitable dumping area as approved by statutory authority out side the campus including all lead by mechanical transport etc. (but excluding the cost of steel reinforcement which shall be paid under relevant item), all as per drawing and specification etc., complete & as directed by the Engineer-in-charge. Please refer Additional Notes.

500 mm dia. piles of length upto 11.0 M length from cut off level

500 mm dia. piles of length exceeding beyond 11.00 M length from cut off level

Extra for RMC (Ready Mixed Concrete) for pile confirming to IS 4926 (latest) in lieu of conventional RCC for pile supplied by approved RMC manufactures including transporting pumping etc. complete as per instruction of the Engineer in charge.

For 500 mm dia. pile

Carrying out routine pile load test for : Note:- Rate should include cost of preparing and submitting the detailed test report to the EIC incorporating all the parameters required for confirming ultimate/safe load carrying capacity of pile

Working capacity of 90 MT for vertical load, using maintained load method as per IS-2911 (Part-4) latest edition using hydraulic jack & dial gauges including all supporting arrangement, kentledge, it's transport, loading, unloading etc. complete (Hydraulic jack and dial gauges shall be got tested/ calibrated from NTL or any other approved Laboratory before use on works.

Lateral load testing of single pile with free pile head for working capacity of 3.5MT in accordance with IS 2911 (Part-4) latest for determining safe allowable lateral load on pile etc. complete as per drawing, as per technical specification and as directed by the Engineer in charge.

Cement concrete of specified grades at all locations & depths for the following works using graded stone aggregate of 20mm maximum size including necessary form work, machine mixing, transporting, placing in position consolidation, finishing, curing etc. complete as per specifications, drawings & as directed by the Engineer in charge. Notes: a) Reinforcement provided if any shall be measured & paid under relevant item. b) MS frame works around pedestals etc. if provided shall be measured under relevant item. c) The dimensions of pedestals/ foundations are likely to be varied and rate quoted shall be final without any additional cost to the Department.

PCC M-10 grade in bed concrete to pile caps, foundations, pedestal, encasing etc.

PCC M-15 grade in sub base flooring, foundation in pedestals, cable pits, cable trenches, plinth protection, encasing, storm water drains haunching, etc.

Reinforced Cement Concrete of grade M-30 in foundation and plinth at all levels and locations conforming to I.S.456-2000 and 13920 latest edition, using 20mm maximum size down graded stone aggregate including machine mixing, conveying, placing in position, mechanical consolidation, finishing, curing etc. all complete as per specifications, drawings and as directed by the Engineer in charge. Please refer Additional Notes.

For all type of Structural/ RCC elements with all geometrical shape and sizes

Extra for providing RMC (Ready Mixed Concrete) conforming to IS :4926 (latest) in lieu of conventional RCC and PCC items supplied by approved RMC manufactures for all type of structural elements/ RCC/ PCC elements including transporting, pumping etc. complete as per instruction of the Engineer in charge. Notes: i) The contractor shall obtain prior approval for RMC manufacturer from Engineer in Charge in writing. ii) The rate shall apply for all levels and locations including all type of structure etc. iii) Extra for RMC in lieu of conventional RCC and PCC of any grade mentioned elsewhere shall be measured and paid under this item for substructure works.

Providing, erecting, fixing in position striking/ removing and cleaning steel / timber shuttering & centering for formwork in foundation and plinth at all locations for all geometrical shapes in plain, curved surfaces of structural/ RCC elements including chamfers, splays, keys, wedges, props, rails, bracings, brackets, cutting holes for pipes etc., providing & applying approved form oil on all surfaces of form work coming in contact with concrete including close hacking of all exposed concrete work after removal of form work, where plastering to be done, including all materials, labour etc. all complete as per specifications, drawings and as directed by the Engineer-in-charge. Notes for form work: a) Area of form work in contact with concrete shall only be measured for payment and stop boards for construction joints will not be measured for payment. b) The rate of form work shall include all type of structural/ RCC elements and geometric shapes including circular and any other curved surfaces. c) For double/ multi stage shuttering design calculations and details / drawings for scaffolding shall be submitted by the contractor well in advance. Prior written approval of formwork shall be obtained from Engineer in Charge, before commencement of work. d) Nothing extra shall be entertained for revision in drawings

Reinforcement for RCC work including supplying, delivering, storing of various diameters as required at site of work including loading, unloading, transporting, decoiling, straightening, cutting, bending, placing in position at all locations & levels and binding with 18 gauge, soft drawn annealed steel binding wire including carrying out various tests as required etc. all as per specifications, drawings & as directed by the Engineerin charge. Note: The cost of binding wire shall be borne by the contractor and binding wire shall not be measured for payment.

Thermo Mechanically Treated bars of grade Fe-500 D manufactured by SAIL, TATA STEEL, JSW and RINL only.

Brick masonry work in foundation, plinth, cable pits, trenches, steps etc. using well burnt bricks from approved lot, of class designation 7.5 (classification as per IS1077-1992 and min. average compression strength not less than 7.5 N/mm2 ) in cement mortar 1: 6 to correct line, leveland plumb including raking outjoints/simultaneous flush pointing with cement mortar 1:4, curing etc. complete as per specifications, drawings and as directed by Engineer in charge. Notes for Brick masonry work: i) One brick wall thickness shall be considered as 250 mm and lesser wall thickness if any shall be made up to the required dimension by the contractor in cement mortar 1:4 to proper line, level & plumb without any extra cost to the department. ii) The rate shall include cost of making the brick masonry to all geometrical shapes and sizes without any extra cost to the Department. iii) The contractor shall get approved the samples of bricks from the Engineer-In- Charge before procurement on large scale and shall maintain the same for the entire work. iv) Necessary Openings/ nitches/ cut-outs, wherever required as per drawings and asked for by the Engineer-In-Charge, shall be provided by the contractor without any extra cost.

Cement plaster using READY MIX Plaster (RMP) of approved manufacturer in single/ double coat over concrete/ masonry surfaces in CM 1:4 of thickness mentioned below at lift pit/ trenches and all locations to correct line, level, plane, plumb etc., finished smooth with neat cement finish, including preparing the surface, scaffolding, curing etc. all complete as per drawings, specifications and as directed by the Engineer in charge.

25 mm thick smooth finish in two coats on concrete surfaces (internal trench/pit) with water proofing agent @ 2% by weight of cement or as per manufacturers specifications.

Disposing off the surplus excavated materials by mechanical transport to the near by dumping pits/ dumping areas at approved disposal ground of MCGM (outside Anushaktinagar) including all leads, lifts, loading, unloading, stacking, spreading, levelling etc. complete as per drawings, specifications & as directed by the Engineer in charge. Note: Voids @ 20% for soils and 50% for soft rock/ hard rock shall be deducted from fully loaded truck measurements to arrive at the net quantity for payment in case direct measurement is not possible.

230mm consolidated thickness.

150mm consolidated thickness.

Supplying and spreading pesticides chlorpyriphos or other chemical approved by central insecticides board as directed by the manufacturer and spraying the mixture uniformly by sprayer as pre-construction anti-termite treatment at the rate of 7.5 liters per sq.m. on vertical and 5 ltrs. per sq.m. on horizontal surfaces (or as directed by the manufacturer) within the trenches, 50% of the emulsion to be filled in the holes made in trenches at 150mm. centre to centre etc. complete as per IS 6313 Part-II. (The payment will be made on the basis of plinth area measurement only at ground floor/ stilt area for all stages of operation and vertical face will not be measured for payment) all complete as per specifications, drawings and as directed by the Engineer in charge. Please refer Additional Notes.

Providing and laying damp proof course 38mm thick at plinth level in cement concrete 1:2:4 using 10mm. maximum size and down graded stone aggregate, mixed with approved water proofing compound at 2% by weight of cement laid to levels, slopes etc. including applying a coat of hot bitumen of grade 80/100 at 17 kg./10 sq.m. including cost of form work, curing all complete as per specifications & as directed by the Engineer in charge.

Providing and laying patent box type cement based water proofing treatment of approved agency for basement raft, vertical walls, lift well & trenches etc. at all levels & locations as per specification of the water proofing agency including cleaning of surfaces, curing and testing the basement raft/ pit for water tightness, rectification of defects if any, etc. complete as per specification and drawing and as directed by the Engineer-in-charge. Please refer Additional Notes.

Providing 50 mm to 70mm thick waterproofing treatment on horizontal surfaces for base/ floor consisting of i) Ist layer shahabad stone of approx. size 600 x 600 x 20mm thick of approved quality rough stone slab over a 25mm thick base of cement mortar 1:3 (1 cement : 3 course sand) mixed with water proofing compound conforming to IS:2645 in the recommended proportion. Joints shall be sealed and grouted with cement slurry mixed with water proofing compound conforming to IS: 2645 in proportions recommended by the manufacturer. ii) 2nd layer of 25mm thick cement mortar 1:3 (1 cement : 3 coarse sand ) mixed with water proofing compound in recommended proportions. iii) Finishing top with stone aggregate of 10mm to 12mm nominal size spreading @ 8cudm/sqm thoroughly embedded in the 2nd layer.

Providing and laying integral cement based treatment for water proofing on the vertical surface by fixing shahabad stone of approx. size 600 x 600 x 20mm thick of approved quality (rough stone slab) with cement slurry mixed with water proofing compound conforming to IS: 2645 in recommended proportion with a gap of 20mm (minimum) between stone slabs and the receiving surfaces and filling the gaps with neat cement slurry mixed with water proofing compound and finishing the exterior stone slab with cement mortar1:4 (1 cement: 4 coarse sand) 20mm thick with neat cement punning mixed with water proofing compound in recommended proportion complete at all levels and as directed by Engineer-in-charge.

Providing & laying NP 2 class of following diameter RCC hume pipe including making holes in masonry/ concrete work wherever required, making good the holes after laying the hume pipe with collar joints using stiff mixture of cement mortar (1:2) and sealing open ends with wooden bush etc. all complete as per specifications & as directed by the Engineer-in-charge. (Earthwork, road work and PCC for embedment shall be paid under relevant items)

150mm dia pipes

250 mm dia pipes

300 mm dia pipes

Supplying and fixing 75mm dia PVC-SWR pipes for weep holes etc., of approved make and with ISI mark including laying the pipe line to proper slope and gradient etc., including cutting to required length etc complete as per specification and as directed by the Engineer in charge.

Supplying, filling, spreading and levelling well graded granular filling at the back & sides of retaining wall at all depths for all lifts and leads all complete as per specifications, drawings and as directed by the EIC. Note: Filter media should be well graded with size of coarse aggregate size varies from 1.5mm to 65mm

Using well graded Filter media and filter grade geotext behind the Retaining wall /Abutment/Walls etc. and as directed by EIC, up to total depth with thickness not less than 1.5m behind the wall with proper wipe holes arrangements shown in drawing or given specification in PH drawing or as directed by EIC.

Galvanized Structural steel work using angles, channels, joists, bars, tubes, SHS, RHS and other sections, welded and / or bolted in built up sections for Gates, structural steel floors, frameworks, monorails, Storm water drain grill cover, cable trench cover and other structures including supplying, cutting, welding, fabricating, bending to shape (Curve and as approved design / any shape as per drawing) hoisting/ erecting, wastages, fixing in position, scaffolding, bracing, providing and fixing in position with necessary Masonry / RRM / RCC fasteners, making holes/ chases wherever required and fixing / embedding in position in concrete/ brick work/ RRM with necessary heavy duty holdfasts/ screws/ J-Bolts & rawl plugs and finishing the concrete/ brick work/ RRM after fixing/ embedding including getting hot dip galvanizing treatment of application of zinc coating of 460gsm (both side inclusive) as per IS:277 to all MS work in approved galvanizing plant etc. and applying two coats of approved metallic shade and colour of synthetic enamel paint over a two coats of a priming coat of approved zinc chromate steel primer etc. complete all as per specifications, drawings and as directed by the Engineer-In-Charge.

Clearing Jungle including uprooting of rank, vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1m, above ground level and removal of rubbish to the, nearest dumping area outside colony with all, leads, cleared as per specifications and as directed, by the Engineer-in-charge. (Note:-Mode of measurement will be as per the actual, area where grass and wild vegetation is cut or, uprooted and their locations/ areas to be got, approved before commencement of cutting the, grass, vegetation or whenever directed).

TOTAL OF PART I-A : SUB STRUCTURE

PART I-B : SUPER-STRUCTURE (STRUCTURAL) Super structure items included in this schedule pertains to all the works above plinth level upto roof including parapets, water tanks, machine room, terrace level works etc. unless specified otherwise.

Reinforced cement concrete of grade M-30 in super structure conforming to IS 456-2000 and 13920 latest edition, at all floors and levels for all structural members in all geometrical shapes/ design as per drawings using graded stone aggregate of 20mm and down graded including machine mixing, conveying, placing in position, mechanical consolidation, finishing, curing, etc. complete all as per drawings, specifications & as directed by Engineer in Charge. Please refer Additional Notes.

For all type of Structural/ RCC Elements with all geometrical shape

Extra for providing RMC (Ready Mixed Concrete) conforming to IS 4926 (Latest) in lieu of conventional RCC items, supplied by approved RMC manufacturers including transportation, pumping etc, complete as per instruction of Engineer in Charge. Notes: i) The contractor shall obtain prior approval for RMC manufacturer from Engineer in Charge in writing. ii) The rate shall apply for all levels and locations including all type of structure etc. iii) Extra for RMC in lieu of conventional RCC of any grade mentioned elsewhere in the schedule shall be measured and paid under this item for superstructure works.

Extra for adding approved integral crystalline waterproofing admixture @ 0.80% (minimum) to the weight of cement content per cubic meter of concrete or as recommended as per manufacturer's specification including mixing, conveying, etc. complete and as directed by Engineer in charge. (For terrace roof slab, sloped roof, head room, etc.) Note: The agency shall have to test for water tightness of roof slab concrete by ponding of water for 48 hours and rectify if required by grouting etc, as directed by Engineer in charge.

Providing & laying average 100 mm thick or as shown in the drawing, Cement concrete coping of mix 1:1.5:3 over window/ Ventillator Cill, parapet wall, etc. including mechanical mixing, consolidation, finishing, making slope, curing, formwork and plastering with Ready Mix Mortar in CM 1:4, 20mm thick, etc. finished with neat cement all complete as per drawing, specification & as directed by Engineer in charge.

Providing & fixing GI Mesh size (100X100X4mm) IRC-fabric at mid- depth of concrete cover to bottom reinforcement of suspended slab/ beam, wherever there is risk of concrete spalling (for water tank slab). The rate shall include cost of labour, materials, binding wire, cutting, bending, binding, strainghtening, placing in position & for welding with main reinforcement of slab, beam etc. complete as per specifications, drawings and as directed by the Engineer in charge.

TOTAL OF PART I-B : SUPER-STRUCTURE (STRUCTURAL)

PART I-C - FORM WORK Notes for form work: i) For double/ multi stage shuttering design calculations and details /drawings for scaffolding shall be submitted by the contractor well in advance. Prior written approval of form work shall be obtained from Engineer in Charge, before commencement of work. ii) Area of form work in contact with concrete shall only be measured for payment and stop boards for construction joints will not be measured for payment. iii) The rate of formwork shall include all type of structural/ RCC elements and all geometric shapes including circular and any other curved surfaces at all level and floors including single/ multiple staging etc., complete.

Providing, erecting, fixing in position, striking/ removing and cleaning steel/ timber shuttering & centering for form work including single/ multiple staging at all level & locations for all geometrical shapes in plain, curved surfaces of structural/ RCC elements and including rails, bracings, props, brackets, cutting holes for pipes etc., providing & applying approved form oil on all surfaces of form work coming in contact with concrete including close hacking of all exposed concrete work after removal of form work, all materials, labour etc. complete as per specifications, drawings & as directed by the Engineer in Charge. (Area of form work in contact with concrete shall only be measured for payment & stop boards for construction joints etc. will not be measured for payment).

Floor height up to 4.50 Mts .

Floor height beyond 4.50 Mts up to a height of 9.00 Mts.

Floor height beyond 9.00 Mts height.

Providing, erecting, fixing, centering, shuttering work using ply board to obtain form finished concrete surfaces of F3 finish to ceilings at all heights & locations including single/ multiple staging at all floors and locations for all geometrical shapes in plane, curved surfaces of structural/ RCC elements including chamfers, splays, keys, wedges, props, rails, bracings, brackets, cutting hole for pipes etc. providing and applying approved form oil to all surfaces of form work coming in contact with concrete and striking/ removal of the same including finishing by filling form-tie holes, removal of fins, ridges and irregularities by grinding, filling airholes, with sack rubbed finish cleaning up loose and adhering debris including all materials labour etc. complete as per specifications drawings and as directed by Engineer in charge.

Floor height up to 4.50 Mts .

Floor height beyond 4.50 Mts up to a height of 9.00 Mts.

Floor height beyond 9.00 Mts height.

TOTAL OF PART I-C - FORM WORK

PART I-D : STEEL REINFORCEMENT WORK

Reinforcement for RCC work including supplying steel bars of various diameters as required at site of work including loading, unloading, transporting, decoiling, straightening, cutting, bending placing in position and binding with 18 gauge, soft drawn annealed steel binding wire including carrying out various tests as required etc. all as per specifications, drawings & as directed by the Engineer in charge. (Cost of binding wire shall be borne by the contractor & shall not be measured for payment).

Thermo Mechanically Treated bars of grade Fe-500 D/ Fe-550 manufactured by SAIL , TATA STEEL, JSW and RINL only.

Providing and fixing Mechanical Splicing coupler for reinforcement steel of the following diameters in RCC work at all levels using threaded couplers (with out reducing the dia of bars with cold forge method) including, cutting, cold forging, threading the bars by mechanical means and fixing/ joining the couplers in bars etc. complete all as specified and directed at site. (DEXTRA-Bartech or equivalent approved make couplers to be used) The rate inclusive of couplers, labour, machinary, tools etc.

16mm Dia. Rebar

20mm Dia. Rebar

25mm Dia. Rebar

32mm Dia. Rebar

TOTAL OF PART I-D : STEEL REINFORCEMENT WORK

PART I-E : MASONRY WORK Notes: a) The contractor shall get approved the samples of autoclaved aerated cement blocks from the Engineer-In-Charge before procurement on large scale and shall maintain the same for the entire work. b) Necessary Openings/ nitches/ pipe sleeves/ cut-outs, wherever required as per drawings and asked for by the Engineer-In-Charge, shall be provided by the contractor without any extra cost. c) Masonry wall thickness shall be considered as 230mm/ 150mm/ 115mm thick and lesser wall thickness if any shall be made up to the required dimensions by the contractor in CM 1:4 using Ready Mix Mortar to proper line, level and plumb without any extra cost to the Department. d) The rate shall include cost of making autoclaved aerated cement blocks masonry to all geometrical shapes and sizes without any extra cost to the Department.

Providing and laying autoclaved aerated cement blocks masonry with 115mm/ 150mm/ 230mm /250mm thick AAC blocks as per approved manufacturer, using approved block laying polymer modified adhesive mortar in super structure above plinth level at all locations, levels & lead with RCC band at sill level and lintel level all complete as per direction of Engineer in-Charge. (The payment of RCC band and reinforcement shall be made for separately)

TOTAL OF PART I-E : MASONRY WORK

PART I-F : FLOORING WORK Please refer Additional Notes.

Providing and laying machine cut and machine polished /un-polished Kotah stone flooring at all floor & location with necessary Ready mix mortar 1:4 bedding, close jointed & grouted with matching cement slurry and finished to line, level, curing etc. as required, including cutting of stone slab, wastage, making cut outs, wherever required, machine polishing/ hand polishing (where machine cannot have access) etc. complete all as per specifications, drawings and as directed by the Engineer in charge.

In flooring with mirror polished kotah stone slab of size 600mm x 600mm/ 575mm x 575mm x 25mm thick laid over 20mm. thick Ready mix mortar 1:4 bedding.

In flooring with unpolished kotah stone slab of size 600mm x 600mm/ 575mm x 575mm x 25mm thick laid over 20mm. thick Ready mix mortar 1:4 bedding.

In skirting with mirror polished kotah stone slab laid over plastered surface fixed with Bal-Endura / Fosroc/ Roff tile adhesive as per IS:15477 or as approved and as per manufacturer's as backing applied with 3mm comb including chamfering and mirror polishing of top edge of size 5mm x 5mm

Providing, machine mixing and laying in approved Panels of 40mm thickness IPS flooring in cement concrete mix of 1:2:4 using graded stone aggregate of 12mm maximum size with colouring pigment, at all levels, well vibrated, compacted including providing and fixing 25mm x 3mm thick aluminium dividing strip, laid in panel of size not exceeding 2.00 sqm, to correct level and finished smooth, curing including preparation of surface by cleaning, hacking and exposing aggregate to achieve the bond, all complete as per specification, drawing and as directed by Engineer in charge.

Ready Mix Mortar plaster 1:4, 20mm thick in skirting with finished smooth wih a floating coat of neat cement, correct to line, level and plumb including rounding of junctions with flooring etc. complete as per specifications, drawings & as directed by Engineer in charge.

Providing & laying at all floors & locations Vitrified tile double charge/ multi charge/ Ultra charge/GVT (Glossy/ Matt/ Satin/Stonex finish) from approved manufacturers conforming to IS 15622 in flooring/ skirting/ dado/ cladding at all floors and location, heights/ levels and lead in approved pattern and colour laid over Ready Mix Mortar bedding/ backing, including cleaning and preparing the surface for bedding, spreading the neat cement slurry, close jointed and grouted with matching coloured ready made cement grout and approved pigment as per manufacturer's specifications, finished to level, line, slope and plumb, cutting of tiles, wastage, making openings/ cut out if neccesary, final cleaning of surfaces, curing etc. all as per drawings, specifications & as directed by Engineer in charge. (Note:-The sizes of tiles mentioned are approximate and subject to the availability in market during execution. If the required size is not available the next higher size of tiles shall be used without any extra cost to the Department. The tenderer may note the same and quote accordingly).

In flooring using tile of size 600 x 600 / 800 x 800mm/ 1200 x 1200mm laid over 20mm thick Ready Mix Mortar 1:4 bedding and spreading neat cement slurry by using minimum cement about 2kg/sqm prior to bedding and spreading cement paste using minimum cement of about 4.50kg/sqm over bedding, including 3 mm thick and 8mm deep grout line using PVC spacers for creating true alignment and gap between vitrified tile & the 3mm spacer joints filled with approved epoxy tile grout including providing and laying Durafloor protector XF 3mm thick sheet of M/s. Supreme industries/ equivalent over the whole vitrified tile cleaning the same before handing over without damaging the finished surface & making good if damaged, if any. Note: Incase the tiles of prescribed sizes not available , alternate tiles of nearby dimensions of area 0.64 sqm to 1.0 sqm shall be used as approved by EIC without additional cost to department

In skirting using tiles of size 800 x 100mm/ 1000 x 100mm laid over plastered surface fixed with Bal-Endura / Fosroc / Roff tile adhesive as per IS:15477 or as approved and as per manufacturer's as backing applied with 3mm comb

In cladding at lift wall / dining / kitchen store/ multi purpose hall using tiles of size 600x600 /800 x 800 mm /1000 x 1000 mm as per approved pattern laid over plastered surface fixed with Bal-Endura/Fosroc/Roff tile adhesive as per IS:15477 or as approved and as per manufacturer's as backing applied with 3mm comb

In ramp flooring using vitrified stonex finish tile of approved make and sizes 800 x 800mm/ 1000 x 1000mm laid over 20mm thick Ready Mix Mortar 1:4 bedding.

For Toilets/Kitchen/Pantry/Green Room/Change room, etc.:- In dado/ clading of size 600 x 600mm / 800 x 800 mm with approved design/ pattern tile laid over plastered surface fixed with Bal-Endura/Fosroc /Roff tile adhesive as per IS:15477 or as approved and as per manufacturer's as backing applied with 3mm comb, PVC corner beading/ nosing of approved heavy quality and colour at the corner and edges of the tiles including finishing and embedding in the wall etc. complete all as directed by the Engineer- in- charge.

Providing & laying at all floors & locations Anti Skid Vitrified tile double charge/ multi charge (Matt/Satin) from approved manufacturers of 600mm x 600mm size and having thickness 8mm or as per manufacturers specification, tiles conforming to IS-15622 in flooring/ skirting/ dado/ cladding at all floors and location, heights/ levels and lead in approved pattern and colour laid over cement mortar bedding/ backing, including cleaning and preparing the surface for bedding, spreading the neat cement slurry, close jointed and grouted with matching coloured ready made cement grout and approved pigment as per manufacturer's specifications, finished to level, line, slope and plumb, cutting of tiles, wastage, making openings/ cut out if neccesary, final cleaning of surfaces, curing etc. all as per drawings, specifications & as directed by Engineer in charge.

For Toilet flooring laid over 20mm thick Ready Mix Mortar 1:4 bedding and spreading neat cement slurry by using minimum cement about 2 kg/sqm prior to bedding and spreading cement paste using minimum cement of about 4.50kg/sqm over bedding, including 3mm thick and 8mm deep grout line using PVC spacers for creating true alignment and gap between vitrified tile if shown in the drawing & the 3mm spacer joints filled with approved epoxy tile grout including providing and laying Durafloor protector XF 3mm thick sheet of M/s Supreme Industries or equivalent over the whole vitrified tile flooring area along with removing and cleaning the same before handing over without damaging the finished surface & making good if damaged, if any.

Providing & laying at all floors & locations Vitrified tiles of Industrial Grade for steps as approved for staircase of stair series for tread with premoulded self imposed antiskid grooves and for risers out of stair series of approved colour from approved manufacturers conforming to IS 15622, in staircase tread/ riser at all floors and location, heights/ levels and lead in approved pattern and colour laid over cement mortar bedding/ backing, including cleaning and preparing the surface for bedding, spreading the neat cement slurry, close jointed and grouted with matching coloured ready made cement grout and approved pigment as per manufacturer's specifications, finished to level, line, slope and plumb, cutting of tiles, wastage, making openings/ cut out if neccesary, final cleaning of surfaces, curing etc. all as per drawings, specifications & as directed by Engineer in charge.

In treads with premoulded self imposed anti-skid grooves (300 mm x 2000 mm or as approved) laid over 20mm. thick Ready Mix Mortar 1:4 bedding.

In Riser laid over 12mm. thick laid over plastered surface fixed with Bal-Endura/Fosroc/Roff tile adhesive as per IS:15477 or as approved and as per manufacturer's as backing

In slopped skirting laid over 12mm thick laid over plastered surface fixed with Bal-Endura/Fosroc/Roff tile adhesive as per IS:15477 or as approved and as per manufacturer's as backing

Providing and fixing 600x600x15mm thk acid proof tiles (Anti static tiles)/ alkali resistant vitrified tile for flooring/ skirting of approved make size and colour as per IS 4457 laid over acid proof ready mix mortar 1:4, 10mm thick over bedding/ backing of 8-10mm thk bitumastic compound and filling the joints with matching epoxy based grout for full depth of tile using acid proof cement mortar of approved make in specified ratio in required slopes and levels etc. complete as per drawings, specifications and as directed by the Engineer-in-charge.

In flooring using tile of size 600 x 600x 15mm thick laid over acid proof ready mix mortar 1:4, 10mm thick over bedding/ backing of 8-10mm thk bitumastic compound and filling the joints with matching epoxy based grout for full depth of tile using acid proof cement mortar of approved make in specified ratio in required slopes and levels etc. complete as per drawings, specifications and as directed by the Engineer-in-charge. Note: Incase the tiles of prescribed sizes not available , alternate tiles of nearby dimensions of area 0.64 sqm to 1.0 sqm shall be used as approved by EIC without additional cost to department

In skirting using tiles of size 800 x 100mm/ 1000 x 100mm laid over plastered surface fixed with Bal-Endura/Fosroc/Roff tile adhesive as per IS:15477 or as approved and as per manufacturer's as backing applied with 3mm comb

Providing, laying and fixing in position Gangsaw cut and line polished Granite stone of approved colour, shade in flooring / skirting / cladding / treads/ risers/ cills etc. at all location including fixed with MYK Latricrete-335 multipurpose adhesive or equivalent over the necessary ready mix mortar of CM 1:4 bedding / backing close jointed and grouted with matching cement slurry and finished to line, level, etc, as required including cutting of stone slabs, wastage, making cutouts, required pattern in plain, curved or any geometric shape and design wherever required all as per specifications , drawings and as directed by the Engineer in charge.

18 mm thick Leather finish Granite stone of approved quality and colour in flooring

18 mm thick Jet black granite or approved colour stone of approved quality for cladding, flooring etc.

18 mm thick approved colour stone of approved quality for cladding, flooring etc.in all size, shape and pattern as per Architectural Drawing.

In skirting Telephone Black with 18mm thick granite stone over plastered surface fixed with Bal-Endura / Fosroc tile adhesive as per manufacturer's as backing including chamfering of top edge of size 5mm x 5mm

with 18mm thick Brown colour granite for Tread with 3 no's anti skid Grooves (5mm wide and 2mm deep) and rounding of exposed edge as per drawing, laid over bedding of 20mm thick Ready Mix Mortar 1:4.

with 18mm thick In Riser with machine polished BLACK Granite stone fixed over plastered surface fixed with Bal-Endura / Fosroc tile adhesive as per manufacturer's as backing

For door/Window/Lift frames for cills, jambs, cladding of Utkal brown 18mm thick granite stone frame upto to 200mm wide to 1000 mm in position at all floors and locations in single piece upto 2100mm including providing and fixing 90mm long stainless steel screws (3 Nos. in each vertical stone)with rawl plug by drilling with high efficiency powered hammered drilling machine and finishing with approved putty with suitable pigment including rounding/ moulding polishing the front exposed surface, in correct line, level and plumb, closed jointed, machine grouting, cement slurry, curing including cutting of final hand polishing, rounding of free exposed stone edges etc.complete all as directed by the E-I-C.

Providing & laying machine cut machine polished natural stone verticals/ topping/ facia etc. for wash basin counter/ reception counter as specified below, over and including necessary mortar bedding/ backing, close jointed and grouted with matching cement slurry and finished to line, level, plumb, curing etc. as required including cutting of stone slabs, wastage, making cut-outs wherever required etc. all as per specifications, drawings and as directed by Engineer in charge.

Topping of wash basin platform/ reception counter and for vertical supports to platform with black granite/ approved colour (40mm thick) (in one piece) and width of about 600mm, machine polished on both sides, moulding to edges as per drawing, making recess in brick wall, fixing in line, level/ slope, plumb, set in cement mortar 1:3 using Ready Mix Mortar, with maximum length upto 3.00 Mts.(approx.), 900mm x 600mm or as required for vertical in single piece with a separate piece for sink area required if any including cutting of slab to fix S.S sink/ wash basin, fixing over structural steel angles wherever required (structural steel will be paid under relevent item ) etc. including necessary cement paste, araldite making good the surfaces and fixing to level, line, plumb, slope etc. all as per drawing and as directed by the Engineer in charge.

Providing and fixing Wooden Flooring system Maple Hardwood Sports Floors (BWF Certified) EN Tested North American of Hardwood Maple Size : 20 MM Thick x 57/83 MM Width Tongue & Groove System 38 MM x 63.5 MM x 1.22 Meter Treated Pinewood Sleepers Installed at 9" (23 CM) Distance with 19 MM Thick Power Pads Sanded, Kiln & Dried Treated with vapour barrier of 6 mil polythylene laid on the IPS , including providing self levelling course with Ardex CL-11 (Self-smoothening Cementitus Underlay) in average 3-4 mm thickness with primer Ardex P-51 (For porous surface- for first coat diluted with water (1:3) and for second coat diluted with water (1:1) or For Non-porous surface use Ardex P-82 as primer in Single coat, after completion of surface preparation, repairing of Pot hole/crack/joint filling etc with repair Mortar, and complete as per ARDEX Guidelines. complete in all respect. Please refer Additional Notes.

Providing and fixing PVC sports flooring system having minmum 4.5mm thickness for Table Tennis / Billiards / Snookers Courts , the PVC roll having approx size (1.8 X 1.5 m) of approved colour, pattern & shade and manufactured by approved manufacturer, the PVC flooring should have properties of shock absorption, ball rebound, slip resistant, fire retardant and anti-bacterial and including supplying, applying suitable manufacturer recommended adhesive having low VOC. The PVC flooring shall confirming to ISO:9001, ISO:14001, CE & ITTF, the minimum thickness of anti slip layer shall be 2 mm and including all labour, material, wastage etc. complete all as per specification & as directed by the EIC.

TOTAL OF PART I-F : FLOORING WORK

PART I-G : DOORS AND WINDOWS Please refer Additional Notes.

Providing & fixing pressed steel door frames of following profile fabricated out of 1.6mm. (16 gauge) thick G.I sheet of coating (class VIII of zinc coating) 120gram/ sqm, manufactured by Sail/ Lloyds/ Jindal or of equivalent profiles/ size generally conforming to IS4351-2003 with suitable one/ two set rebates for fixing shutters and also rebate suitable for fixing fixed glazing including hole for self tapping screws wherever shown in the drawing, each frame to contain hinge jamb, lock jamb and head all rigidly fixed together with welded/ mechanical joints with back plates/ angles to correct shape & angles including providing and fixing base ties with GI channel l50x25mm 1.6mm. thick suitable section to suit floor thickness/ angle thresholds with MS angle 25x25x3mm. 6 nos. of adjustable lugs per frame, providing and welding of 40x40x5mm, 150mm long angle cleats for hinges with necessary tapped holes for fixing counter sunk headed machine screws to suit heavy duty oxidised/ stainless steel hinges of size125 X 65 x 2.8mm/ 125 x 76 x 2.80mm/ 100 x 59 x 2.60mm/ 75 x 48 x 2.45 mm or shop type welding and self taping screw hinges/ piano hinges etc. and finishing the same to smooth etc. (but excluding the cost of hinges which shall be paid under the relevant item) including providing each door frame with necessary lock strike plates, mortar guards,

Profile 145mm x 60 mm with single rebate.

Profile 145mm x 50 mm with single rebate.

Providing & fixing fire rated door frame & shutter system at all floors & locations using system of approved manufaturer or approved equivalent, the non-metallic wooden door frame & shutter system having 120 minute (2 hr) fire rating, asbestos free, fully insulated composite fire resistant conforming to BS:476, part 20-22, integrity, insulation and stability (3 criteria: fully insulated) as per IS:3614 Part 2, as per prototype tested & certified by Fire Research Laboratory, like CBRI Roorkee, IPIRTI, Bangalore, with standard heating conditions as specified in IS:3809-1979 and BS:476 (Part 20 - 22)-1987 to achieve the required integrity & insulation (i.e. to restrict the heat radiation, temperature rise on the non fire side to the maximum of 140 degree centigrade above the ambient temperature on the unexpoed surface of the shutter)

(a) Door Frame-The fire rated, non-metallic engineered wooden door frame of section 150 mm X 75 mm with 2 Nos of intumescent strip (imported) on all three members to take care of hot smoke. the size of the intumescent strips shall be 10 mm X 2 mm, concealed in the groove of the frame. Installation of the frame to be done with specially designed door anchoring systems so that there are no holes in the frames. The anchoring system shall have 3 anchoring points on each side of the frame that shall secure the frames in the floor as well as on the wall. The frame anchoring system shall be secures with 4 anchor fastaners on each side (2 per set) for any type of wall except brick walls, In case of brick work, M.S coach screw 100mm long or of equivalent size shall be used. The entire anchoring system should be concealed between the frame and the wall.

Architraves : Telescopic type architrave to take care of 10mm variation in the wall width to be provided. This should be manufactured from Marine grade calibrated ply as per IS 710. Foam: All gaps between the wall and the frame should be filled with imported Fire retardant PU foam of Brand Multifoam or equivalent. The entire set shall be decorated with approved shade of 1.00mm thick decorative fire retardant laminate sheet of approved colour, pattern & shade fixed on both sides etc. with approved adhesive machine pressed for all surfaces including edges including cost of all materials, adhesives, labours, wastages if any.

(b) Door Shutter-The fire rated, non-metallic wooden door shutter (single / double leaf) of not less than 55 mm thick made out of wooden perimeter railing (stiles & Rails). The hollow section in the perimeter railling should be fillied with high density ceramic wool. this assembly to be layered with MGO board of thickness 8 to 10mm on both sides further supported with Marine grade calibrated ply as per IS 710 on both sides. Smoke intumescent seal of size 20 mm X 4 mm with casing to be mounted in the grooves in the shutter on all sides except bottom with wooden beading on all side. Including providing and fixing 1.0 mm thick decorative HPL (High Pressure Laminate) or decorative ply based veneer sheet of approved colour, pattern & shade fixed on both sides etc. with approved adhesive; machine pressed for all surfaces including edges including cost of all materials, adhesives, labours, wastages if any.

Hinges: Minimum 4 Nos of Fire Retardant hinges shall be supplied with the Shutter to be supplied by manufacturer without any extra cost to the department as per the fire norms and as approved. Slotting: The shutter shall be prepared for installation of any type of hardware at the factory. Vision Panel: If any shall be fire rated 6mm glass of Scott Pyran or equivlent thouroughly held on both sides. The minimum width of the glass has to be 200mm and Maximum length can be 1000mm.

(c) Installation & Certification-The installation of door frame & shutter system shall be from approved licensed agency of Mumbai Fire Department and Form-A for installation of fire door frame & shutter system to be submiited by agency and Fire Resistant certification as required by CFO/ MCGM shall be furnished by Manufacturer of Fire rated door frame & shutter system including Form "A", etc all complete as per specifications, drawings & as directed by Engineer in charge. (Note:- The outer to outer length & width of frame only will be measured for calcualtion of area of payment)

Door Size (1.00 X 2.40 mtr) with single leaf shutter.

Door Size (0.75 X 2.40 mtr) with single leaf shutter.

Terrace Door Size (1.00 X 2.1 mtr) with single leaf shutter Partly panelled partly louvered with 2 hours fire rating. Wooden Louvers to be painted with fire retardant paint and 6" radius breakable glass cover over latch as shown in detailed drawing etc. all complete to the entire specification as per detailed drawing & as directed by the Engineer in charge.

View Panel : Fire rated 6mm glass of Scott Pyran or equivlent thouroughly held on both sides with fire rated Beading of approved make as per CFO requirement and as per Drawing.

Providing and fixing 78mm thick acoustical double leaf door shutter consisting of marine ply over core of sale wood frame box section with 2 Nos end style of 50 X 100 mm and middle vertical style of 50 X 75 mm (Total 3 Nos vertical styles) and top and middle rail 50 X 100 mm and bottom rail of 50 X 200 mm frame work filled with 50mm thick Rockwool isulation of density 48kg/cum covered on both faces with 12 mm thick marine ply conforming to relavent (IS 710 ) with 1 mm thick approved colour/shade lamination on both sides with necessary adhsives, first class steam beach external beading all-round of size 78mm X 6mm including providing "Z" shape rebate at meeting styles etc. including melamine spray (Glossy/matt) finish over 3 coats of french polish for external lipping etc. after necessary prepartion of surface,

filing wit approved filler, including closing the top portion top 925 mm with 78 shutter panel of same construction along with 1 mm thick approved laminate on both sides including Supplying & fixing at site of work approved quality brass fittings heavy duty with 4nos. of 300mm long x 12mm/13mm barrel Tower bolt, 2nos. of Aldrop 250mm long x 16mm dia. rod with an extra staple brass, 04 nos. of H type bow handle 300mm long with concealed brass screws and fastenings along with brass screws, bolts, nuts, washers wooden packing pieces, 04 nos. of brass heavy duty hinges for single shutter and 08 hinges for double shutter etc. and other accessories etc. without any extra cost to department and fixing arrangment etc., complete as per drawing and as directed by EIC.

Providing & fixing in position, single/ double leaves folding/ hinged type galvanised pressed steel box type door shutter 2 hrs fire rated metal door for panel room etc. at all floor and location of sizes as mentioned below consisting of 40x40x4mm MS heavy duty square for shutter frame with two middle stiffeners, welded with 1.6mm (16 gauge) MS sheets, both side of square pipes, sheet and square pipes shall be galvanising coating (Class -VIII of zinc coating ), 120gm/ sqm as per IS 2629 latest , MS sheet manufactured by M/s Sail/ Lloyds/ Jindal fixing the frame to floor/ ceiling, vertical members fixed to wall with threaded sleeves of standard quality at 600mm centre to centre including providing 16 Gauge G.I sheet, 80mm wide to vertical stiffner at centre to the full height for each shutter bent to proper shape and providing 16G. M.S.sheet louvers at top and bottom with G.I wire mesh as per drawing including p/f necessary

locking arrangement, S.S. tower bolts 300mm long, 200mm long handles, aldrops, 4nos. detachable type heavy duty 304grade stainless steel ball bearing hinges for each shutter (with bolt & nut arrangement) including providing and fixing all necessary fittings and fixtures and cost of all materials, labour, drilling cutting, fabricating, welding fixing fasteners, bolts, nuts, washers etc. including wastages, chasing the masonry/ RCC surfaces if required and making good the same to match with surrounding finishing, grouting the fasteners sleeves/ hold fast in CC 1:2:4 to fix the frame over masonry wall or suitable anchor fastner in case of concrete surfaces etc. and painting all the exposed surfaces of frame and shutter with two coats of synthetic enamel paint of approved make and colour over a coat of approved yellow zinc chromate primer over a coat of "etch" primer for all surfaces all as per specification, drawings and the installation of door frame & shutter system shall be from approved licened agency of Mumbai Fire Department and Form-A for installation of fire door frame & shutter system to be submitted by agency and Fire Resistant certification as required by CFO/MCGM shall be furnished by Manufacturer of Fire rated door frame & shutter system including Form "A"as directed by the Engineer in charge. Please refer Additional Notes.

Steel door of size as per drawing, with single/ two equal leaves shutters.

Supplying & fixing in position the following type solid core block board flush door shutters with commercial ply facing/ prelamination on both sides machine pressed conforming to IS 2202 (Part-1) of approved make with external/internal type second class teak wood lipping alround of required shutter width and depth as per IS as specified polished alround, fixing shutters in position to HMPS door frames/ wooden frames/ granite frame works (door frames shall be paid separately under relevant item) at all floors by cutting/ planing if necessary including labour for fixing of the fittings & fixtures as per drawing with wooden packing pieces if necessary (but excluding the cost of fittings and fixtures with SS screws which shall be paid separately under relevant item), including view panel using 4mm thick glass & teak wood beading with materials, if required as per drawing including providing & fixing 1 mm thick decorative laminate sheet of approved make, pattern in two colour or as per architectural drawings and shade fixed on both sides etc. with approved adhesive for all surfaces including edges, including cost of all labours, wastages if any, all complete as per specifications, drawings & all as directed by E-I-C.

For Door D2 of size 1000 x 2400 x 50mm thick as per drawing and specifications, single leaf shutter with external second class Teak wood lipping of section 50mm x 10mm all around including 200mm x 400 mm view panel whereever required as per drawing.

For Door D1, D3, D5 of 38mm thick as per drawing and specifications, single leaf shutter with external second class Teak wood lipping of section 38mm x 10mm all around including 150mm x 150 mm view panel where ever required as per drawing.

Providing and fixing 19mm thick marine ply door shutter at all floors and levels consisting of single or double leaf shutters bonded with phenol formaldihyde resin of approved manufacture, with second class teak wood lipping of size 19mm X 20mm all round the shutter, including providing and fixing decorative laminate sheet of thickness given below of approved colour and shade fixed over both sides with approved adhesive as shown in drawing including cost of all materials, adhesives labours, wastages, moulding 25x25mm at top, wooden block at top 25x50mm, fixing of fitting and fixtures (cost of fitting & fixture will be paid under relevant item) painting the edges with Synthetic Enamel paint etc. all complete as per specification, drawing and as directed by Engineer-In-Charge.

Single leaf shutter of 700mm x 1000mm size of 19mm thk marine ply with 1.0mm thk laminate on both sides of the shutter.

D4 of size 750 x 2400mm including providing & fixing accessories of 3 nos 100mm stainless steel hinges, PVC moulded louvers at top of shutter of size as per drg, keyless cylindrical knob, 100mm long stainless steel baby latch, magnetic latch, etc., complete.

D6 of size 900 x 2400mm approx. including providing & fixing accessories of 3 nos 125mm stainless steel hinges, PVC moulded louvers at top of shutter of size as per drawing, 100mm long stainless steel baby latch, 600mm long D type stainless steel handle on vertical and horizontal of both sides of the shutter (4nos per shutter) as per drawing, etc., complete.

Providing & fixing in position approved quality 2nd class teak wood architraves of finished section of approved profile for the following sizes fixed to pressed steel frames of door/ cup board/ MS doors at all floors as per drawing including providing and fixing M.S. self taped screws at 600mm center, painting with two coats of synthetic enamel paint of approved make, & colour over one coat of approved primer etc. all complete as per specification & drawings.

Size 50mm x 20mm of finished size

Providing and fixing in position second class approved quality teak wood moulded, rebated frames of suitable section wrought and finished sizes, conforming to IS:4021 - 1967 for cupboard / exhaust fan frame, wall panelling etc. at all height and location, including making holes in concrete/masonry walls and providing and fixing MS hold fasts 300x30x3mm thick embedded in plain cement concrete 1:3:6 in case of brick work and MS coach screw 100mm long or equivalent size in case of RCC/stone works including painting two coats of bitumastic paint for all unexposed surfaces coming in contract with concrete/brick masonry and painting the exposed surface with two coats of syntetic enamel paintof approved make and shade over a coat of approved primer etc. complete all as per drawing, specification, and as directed by the E-I-C.

Providing and fixing approved hard wood rough ground/ sub frames /frame work of specified size made out of approved quality sal wood, Kiln-seasoned, chemically treated, anti-termite treated, shaped, grooved, mitered joint arrangement including GI screws, pins, drilling holes, anchor fasteners if any etc. Also exposed faces shall be finished with approved wood primer, surfaces in contact with masonry/concrete surfaces shall be painted with one coat of hot bitumen of approved quality (Black Japan). Further fixing with specified GI holdfast whereever necessary (split and 300 x30 x 3 mm thick) and well-grouted with cementconcrete fillet of M15 grade etc. all complete as per drawing and as directed by EIC.

Supplying and fixing in position at all floors integrated bronze anodised matt finished [15 micron thick], aluminium section [extruded] for aluminium Door/ windows sliding/top hung/ fixed/ openable/grill/ adjustable louvered/ windows as per drawing of approved manufacturers with extruded sections of M/s Jindal/ Hindalco or other approved equivalent sections with size and weights as shown in the drawing, for frames and shutters [including wastages if any] conforming to relevant I.S specifications with all approved Bronze anodised aluminium fittings and accessories, locking arrangements, 2/ 3 rollers with ball bearings for sliding shutters of approved quality all as shown in the drawing, including providing and fixing aluminium channel beading/ glazing clips fixed with necessary bronze anodised screws, grouting the gap with thermocole & polysulphide sealant etc. all complete generally as per drawings, specifications etc., all as directed by Engineer in charge but excluding the cost of glazing, which will be paid separately. Please refer Additional Notes

Aluminium for Doors and windows

Aluminium for Glazing works

Designing, supplying and installing semi-unitized, minimum three barrier system, structural glazing framework including mullions, transoms, gutters, sills, trims, sashes for vision and spandrel panels (with fixed panels / top hung openable Panels) as shown in drawing with anodized aluminium extrusions satin finished (Min 25 Micron) in approved colour, stainless steel brackets / clamps, stainless steel grade 316 bolts, nuts, washers and shims, fittings, handles, silicon / EPDM gaskets, drainage provisions, weather seals, anodised aluminium coping, aluminium flashings and seals at all interfaces with building structure, openings and cladding system etc. on linear as well as curved surface in plan all complete as per approved shop drawings and specifications . Designing includes structural design of aluminium frame work, joints, brackets, anchor fasteners(M/s Hilti only), structural sealant etc. The rates shall include all labour, scaffolding, machinery, material, wastages, fixing powder coated M.S.Brackets, test, welding MS to MS / SS, chipping of walls beams, columns, rectification if required etc. all complete as per approved shop drawing and specifications. Please refer Additional Notes

Design, fabrication, supply and installation of frameless Facade using clear, toughened float glass of specified thickness for fixed glazing and openable panels (doors) with crystal edge polish and necessary patch fittings (DORMA PT range) for swing doors, hunged on floor spring, having a length of 1200 mm minimum, S.S.handles and locking arrangement and clear toughened float glass fixed for fins and all joints sealed with weather silicone sealent and fixed portion glass from top sides and bottom with anodised (minimum thickness 25 microns) Aluminium 'C' channels (25 mm X 25 mm X 1.5mm thick) and all glass to glass joints sealed with clear thick weather silicone sealent and making the required grooves in plaster/concrete for fixing channels etc and making good the same with sealent/plaster of paris etc. complete all as per approved shop drawings, specifications and as directed by Engineer-in-charge.(approximate size of the openings).

Frameless openable panels (swing doors) using 12mm thick for Toughened glass including making cutouts/ holes, finishing the edges with crystal edge polish, sealents etc complete. Glass area alone shall be measured and paid (necessary patch fittings, locks & floor springs shall be paid under relevant Item)

Providing and fixing of 25 micron thick frosted film of approved design of M/s. 3M / M/s. Saint Gobin, over doors glasses etc including cutting to size, solution for fixing, cleaning the glass, disposal of debris of outside colony etc all complete all as per specifications and as directed by Engineer in Charge.

Providing, supplying, fixing 'DORMA' make PT range PT 10/ PT 20 Top & bottom patch fittings with covers to suit floor springs & free pivots .

Providing, supplying, fixing 'DORMA' make Universal Centre lock with strike Plate.

Providing, supplying, fixing 'DORMA' make MANET back to back Stainless steel Handle-720 mm long

Providing, supplying, fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism, including cost of cutting floors, embedding in floors as required and making good the same matching to the floor finishing etc. complete as per the direction of Engineer-in-Charge.

Providing & Fixing U/H Type SS 304 grade decorative Handle - of following size fixed over glass / wooden doors as per approved sample of Dorma make or equivalent with all standard accessories etc complete and as directed by EIC. (Note: Cost is for one set consists of two nos to fix on door shutter both inside and outside)

32mm dia. 300 mm long

32mm dia. 600 mm long

Providing and fixing following type of approved quality glass panes for doors/ windows/ ventilators of M/s. Modiguard/ M/s Saint gobain or approved equivalent and fixing with aluminium/ upvc frame work including fixing aluminium channel beading (to be paid under relevent item) and providing and fixing with 2 way EPDM gasket, to ensure water and air tightness and neoprene cushions/ gasket accommodated in grooves, necessary bronze anodised screws etc., all complete generally as per drawings, specifications and as directed by the Engineer-in-charge.

5 mm thick clear float glass

6 mm thick clear float glass

6 mm thick clear toughened reflective glass

8 mm thick clear toughened reflective glass

Providing and Fixing 12 mm thick clear toughened glass for partition walls, doors of approved brand and manufacture etc fixed in aluminium frame work or without frame work, including making necessary holes wherever required etc for fixing required door fittings and other fixtures, all complete as per drawing and direction of Engineer-in-charge (Note: Anodised aluminium frame work, Door locks, Floor springs, SS handles will be paid in respective items separately. The cost of work is inclusive for any SS patch fittings required for completion of work).

Supplying and fixing in position at all floors and location stainless steel 304 grade mosquito net made out of 24 guage 16 mesh shutters of various size and shape fixing with stainless steel nuts and bolts to suit the aluminium frame fixed in sliding/openable/fixed windows conforming to IS:1948-1961 as per drawing (aluminium frame, beading etc. shall be paid under relevant item) including labour wastage scaffolding etc. all complete as per drawing, specification and as directed by Engineer in charge.

Providing and fixing in position (gear type) operated by mechanically winding handle, powder coated Aluminium rolling shutter of required size confirming to IS 6248 latest consist of 75 mm(3”) wide 18G laths inner locked together through at the end by end locks, including all necessary fixtures & fittings and aluminium top hood, guide channels, shutter suspension shaft with tested springs, ball bearing, ceiling strips, locking arrangement from inside and outside, crank handles etc, fixing guides in masonry/concrete with necessary coach screws, nuts and bolts with necessary accessories viz aluminium brackets as per drawings, specifications as directed by Engineer-in charge. Note: The measurement for rolling shutters will be as per structural opening, hoods will not be measured separately.

TOTAL OF PART I-G : DOORS AND WINDOWS

PART I-H : FITTING & FIXTURES Notes: i) One sample board consisting of each item of schedule of quantities with approved quality fittings & fixtures & necessary accessories including chromium plated brass screws, bolts, nuts, washers should be submitted for approval of Engineer-in- charge. Large scale procurement shall be taken up only after approval of the Engineer-in-charge. After approval, the samples shall be kept in the office of the Engineer-in-charge to ascertain the approved quality for the entire work. ii) All fittings & fixtures shall conform to relevant IS code.

Supplying at site of work approved quality and manufacturer (M/s Dorma SS Matt finish) Stainless steel (SS-304) fittings, fixtures and fastenings along with Stainless steel screws, bolts, nuts, washers, wooden packing pieces if necessary etc. and other accessories etc complete.

Tower bolt 450 mm long

D type bow handle 150 mm long

Aldrop 300 mm long x 16 mm dia. Rod with an extra staple.

Standard 75mm baby latch.

Door stopper with twin-rubber bushing (shutter mount type)

Heavy duty Butt Hinges 125x76x3mm (Premium)

Supplying following type of approved quality miscellaneous fittings, fixtures and fastenings along with necessary SS screws, bolts, nuts, washers, wooden packing pieces if necessary etc and other standard accessories complete.

Supplying 6- lever Mortice lock of chromium plated brass parts & body of Godrej make model no. 7117, 200mm Handle Set Lock Body CK mortice lock with chromium plated brass screws etc. lock shall be fitted as per manufacturer specification and as directed by Engineer in charge.

Providing and fixing approved quality open door closer of Dorma Make or equivalent make with necessary screws, fixing to the aluminium / glass / wooden door complete as per drawings, specifications including all labour, transporting etc. and as directed by the Engineer-in-Charge .

Providing and fixing approved quality concealed door closer of Dorma Make or equivalent make with necessary screws, fixing to the aluminium / glass / wooden door complete as per drawings, specifications including all labour, transporting etc. and as directed by the Engineer-in-Charge.

Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315 ( Make of Hardwyn or Dorma), having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-Charge.

TOTAL OF PART : I-H FITTING & FIXTURES

PART -I-I : WATERPROOFING TREATMENT Please refer Additional Notes.

Providing and laying integral cement based water proofing treatment of the agency approved by department, including preparation of surface as required for treatment of roofs, terraces etc mixing with waterproofing compound as per IS : 2645 :2003, with average thickness of 115mm and minimum thickness at drain point as 65 mm. Following works are included in above item. a) Applying and grouting a slurry coat of neat cement using 2.75 kg/sqm. Of cement admixed with proprietary water proofing compound over the RCC slab including cleaning the surface before treatment. b) Laying cement concrete using broken bricks/ brick bats 25mm to 100mm size with 50% of Readymix mortar 1:4 (1 cement : 4 coarse sand) admixed with proprietary water proofing compound over 20 mm thick layer of Ready mix mortar of 1:4 (1 cement : 4 coarse sand) admixed with proprietary water proofing compound to required slope and treating similarly the adjoining walls up to 300 mm height including rounding of junctions of walls and slabs.

c) After two days of proper curing applying a second coat of cement slurry admixed with proprietary waterproofing compound. d) Finishing the surfaces with 20 mm thick joint less cement mortar using readymix C.M 1:4 (1 cement : 4 coarse sand) admixed with proprietary water proofing compound and finally finishing the surface with trowel with neat cement slurry & making pattern of 300x300mm square 3mm deep or suitable to receive the China Mosaic waterproofing treatment wherever specified. e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by the Engineer in Charge.

Extra for additional thickness of brick bat coba using ready mix mortar over and above standard average thickness of 115 mm. for effective slope wherever required.

Filling in bath, W/C, toilet, depressed areas with water proofing brick bat coba of the agency approved by the Dept. at all floors and locations up to the required level and making the surface finished suitable to receive floor finish etc. all complete as per drawings and water proofing agency's specifications & as directed by the Engineer in charge.

Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., Kitchen and the like consisting of : i) 1st course of applying cement slurry @ 4.4. Kg/sqm mixed with water proofing compound `Impermo' of Snowcem or equivalent conforming to IS 2645 in recommended proportions. ii) IInd course of cement plaster 1:3 (1 cement : 3 coarse sand) using Ready Mix Mortar mixed with water proofing compound in recommended proportions, 20mm thick up to finished floor level and 15mm thick above finished floor level up to 600mm. iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 Kg per sqm of area. iv) IV th course of 200 micron thick PVC sheet (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 Kg/sqm.)

Providing cement based water proofing treatment by 'Injection & Surface' method of the agency approved by the dept. cement based water proofing treatment of 50 mm. and 20mm. thick for the floor and walls respectively at terrace water tanks, finished perfectly smooth to correct line, level and plumb including preparing the existing surfaces, necessary scaffolding, curing etc. complete as per waterproofing agency's specifications and testing water tank for the water tightness and rectification of defects, if any, to render the outer surface bone dry etc. complete as per specifications, drawing and as directed by the Engineer in charge.

Providing waterproof readymix mortar 1:3 mixed with non shrink properties of M/s Fosroc / Krishna Chemical or equivalent @ 10kg/bag of cement including racking out of the joints 25 mm wide x 25mm depth, cleaning, mixing the mortar in appropriate ratio, filling in the 25 wide x 25 mm depth racked out joints of RCC, brick work, also extending the mortar projection with about 50 mm wide, 10 to 12mm thick over the joints, curing, single/ double scaffolding wherever required etc. complete all as per specifications and as directed by the Engineer- in- charge. Note:- The contractor shall furnish guarantee bond on appropriate stamp paper in the proforma as per Section 10 (iii) of Conditions and Clauses of Contract - 2008 for the entire waterproofing treatment for maintaining the surroundings and under side surfaces of the waterproofing treated area in bone dry condition for 10 years. During the guarantee period the contractor shall attend all leakages, defects etc. if noticed, free of cost, starting the work of checking up and rectification within a week's time from the date of intimation about such leakages/ defects.The contractor shall get written approval from the Engineer in Charge for the water proofing agency engaged and shall submit the specification of the waterproofing before commencement of work.

Providing China Mosaic water proofing over concrete/plastered surface of horizontal, vertical, sloped/ curved surfaces, rounded vatas, sharp corners, junctions etc., using broken pieces of approved colour ceramic tile laid over and including 20mm thick cement mortar 1:3 screed mixed with approved waterproofing compound @ 2% by weight of cement, cost of all materials, labour, curing, breaking the tiles to the pieces of required size and shape, laying / fixing the tile pieces to the required line, slope, levels etc., providing extra screed as required for quick & easy flow of water, curing etc., at all heights including necessary scaffolding, cleaning the surface initially with saw dust and finally with acid all asper specifications and as directed by the Engineer-in-Charge.

TOTAL OF PART I-I : WATERPROOFING TREATMENT

PART I- J : PLASTERING WORK Note: a) Before commencement of plastering, the area shall be cleaned, wetted and shall be marked with 'Thiyyas' or 'Tapanis' and shall be got approved by the Engineer-in-charge. b) Whenever the electrical contractor/ agency has to fix up switch boxes in walls, necessary Thiyyas or 'Dhadas' shall be arranged prior to plastering so that the electrical boxes are fixed properly in line with the finished plastered surfaces. c) Finishing around the junction boxes shall be done at all floor, level and position to the line, level and right angles as required while carrying out plastering work. d) No extra claim/cement consumption shall be entertained by the department for the plastering done more than the specified thickness shown in the schedule of quantities, to bring the plastered surface to perfect line, level and plumb with adjoining columns and beams. e) Only Ready mix Mortar of approved make shall be used. For richer proportion additional cement to be added in required proportion.

Cement plaster using READY MIX MORTAR (RMM) of approved manufacturer (Roofit Mix, Wallplast, Readiplast, Silcoplast) in single/ double coat as specified over Concrete surfaces in thickness as mentioned, in C.M 1:4 or richer by proportionally increasing cement content as required, over plane or curved surfaces at all level including rounding of surfaces wherever required, prepare the surfaces even and smooth in correct line, level, plane and plumb including scaffolding, chemical curing etc. complete as per specification drawings and as directed by the Engineer in charge.

15 mm thick cement plaster using RMM 1:4 mix for internal brick / concrete surfaces for all walls and beams flush with walls, mullions etc.

Sand faced cement plaster as mentioned below in CM 1:4, using factory manufactured pre mix/ ready mix of 'Roofit Mix' of M/s Premier Floor to Roof Materials pvt.ltd/ 'Build Well ready mix plaster' of M/s Walplast Products pvt.ltd/ 'Readiplast' of M/s Ultratech Cement Ltd / Readymade polymerised Dry mix Plaster - Silicoplast of M/s. Precise Conchem Pvt. Ltd.or other approved equivalent make, having minimum composition of Cement : Sand as 1:4 using fully treated dry, well graded natural sand conforming to IS 383 suitable for external plastering, having low rebound properties, low water demand for curing properties, mechanical mixing with water in a metallic tray only to make good consistency as per the specification of the Manufacturer and applied over exterior masonry and concrete surfaces final rendering, including using richer mix for making corners if necessary and making nosing / dripmould in plaster wherever required, at all floors, levels, all heights and locations including scaffolding, preparing the surfaces, finishing and rendering with sponge to correct line, level and plumb, curing/ chemical curing etc. complete as per specification and drawings and as directed by Engineer-in Charge.

20 mm thick in two coats for brick/ concrete surfaces (external / internal) (back coat and finishing coat of 10 mm. thick each) with water proofing agent @ 2% by weight of cement or as per manufacturers specifications

12 mm. thick in single coat for independent concrete surfaces with waterproofing agent @ 2% by weight of cement or as per manufacturers specifications.

Making various elevational features such as panels/ arches/ mouldings/ bands of various sizes and shapes as mentioned below in C.M. 1:3 using Ready Mix Mortar in proper line, level, shape and design as shown in the drawings, fixing chicken wire mesh if required (to be paid under relevant item), preparing surfaces, rendering with sponge, scaffolding, curing, etc., complete all as per drawing, specification and as directed by the Engineer-in-Charge.

Bands of various width upto 150mm wide (10 mm projection over plastered surface)

Panel projections of various size 300 x 200mm/ 100x500mm/ 200x500mm/ 100x200mm etc (10 mm projection over plastered surface)

For arches (10 mm projection over plastered surface) with keystone (20 mm projection over plastered surface) of various width up to 230mm thick

Providing vatas 150 x 150 mm at junction of walls and chajjas canopies etc. with cement mortar 1:3 using Ready Mix Mortar (RMM) of approved maufacturer to match surrounding plaster to the required profile including adding water proofing compound @2% by weight of cement or as per manufacturers specification, scaffolding‚ curing etc. complete as per specifications and drawings and as directed by the Engineer-in-charge.

Providing & fixing in position chicken wire mesh (Hexagonal shape) of M/s Arpita Plaster mesh or approved equivalent, of 12mm size hole, 22 Gauge with necessary "U" hooks, clips or nails at all floors and levels, wherever required to prevent development of cracks in plaster surfaces, as per specifications, drawings and as directed by the Engineer in charge (Only area of chicken wire mesh provided shall be measured for payment).

TOTAL OF PART I- J : PLASTERING WORK

PART I-K : PAINTING

Providing and applying 1.5 mm thick cement based wall care putty in two coats of approved manufacturers at all floors and locations, over plastered surfaces finished smooth to correct line, level, plane, plumb etc., including preparing the surfaces, scaffolding smoothen the putty surfaces with very fine water proof emery paper to get a glossy finish etc. complete as per specifications, as per manufacturers specifications, drawing & as directed by the Engineer-in-charge.

Painting plastered/ concrete surfaces with two coats of acrylic premium (plastic) emulsion paint of approved colour and make over a coat of approved cement/ Acrylic primer including preparing the surfaces, filling with putty wherever required, scaffolding and cleaning etc, complete as per specifications, drawings and as directed by the Engineer in charge.

Painting plastered/ concrete surfaces with two coats of exterior grade Acrylic emulsion paint of approved manufacturer and of approved colour and shade over a coat of acrylic based water repellent primer of approved make and shade as mentioned below all as per manufacturer's recommendations and as per the approved sample and pattern including providing necessary scaffolding, cleaning the surface with water to remove all coating, dust, filling up cracks & crevices with approved putty, curing the surface etc. complete as per specifications and as directed by Engineer in Charge. a) Over sand faced plaster and jalli Note:- Both sides of the jalli shall be measured for payment.

Providing and applying synthetic plaster finish paint of approved manufacturer & approved pattern over plastered surface by applying one coat of synthetic plaster of thickness as per manufacturer’s specification by trowel/spray and as per approved design (Scratch / Pearl) including finishing the sharp edges at corners, nitches, etc to perfect line, level, plumb and applying two coats finish of approved premium exterior emulsion paint (with PU and silicon technology) as per manufacturer’s recommendations and specification, of approved colour and shade, including all labour, materials, scaffolding, double height staging if required and surface preparation, in plane/curved/any geometric shaped surface, at all heights, leads, lifts and location as specified in the drawing all complete as per specification and as directed by Engineer in charge. Note : Finished surface area shall be measured for payment

Providing and applying synthetic plaster finish paint of approved manufacturer & approved pattern over plastered surface by applying one coat of synthetic plaster of thickness as per manufacturer’s specification by trowel/spray and as per approved design (Solitair Stone finish) including finishing the sharp edges at corners, nitches, etc to perfect line, level, plumb and applying two coats finish of approved premium exterior emulsion paint (with PU and silicon technology) as per manufacturer’s recommendations and specification, of approved colour and shade, including all labour, materials, scaffolding, double height staging if required and surface preparation, in plane/curved/any geometric shaped surface, at all heights, leads, lifts and location as specified in the drawing all complete as per specification and as directed by Engineer in charge. Note : Finished surface area shall be measured for payment

TOTAL OF PART I-K : PAINTING

PART I-L : MISCELLANEOUS WORKS Note: One sample of each item should be submitted for preliminary inspection and approval before procurement/ manufacturing on large scale. After the preliminary inspection and approval, the sample should be fixed at site or kept in the office of the Engineer-in-charge till completion of the work.

Galvanized Structural steel work using angles, channels, joists, bars, tubes, SHS, RHS and other sections, welded and / or bolted in built up sections for Gates, structural steel floors, frameworks, monorails and other structures including supplying, cutting, welding, fabricating, bending to shape (Curve and as approved design / any shape as per drawing) hoisting/ erecting, wastages, fixing in position, scaffolding, bracing, providing and fixing in position with necessary Masonry / RRM / RCC fasteners, making holes/ chases wherever required and fixing / embedding in position in concrete/ brick work/ RRM with necessary heavy duty holdfasts/ screws/ J-Bolts & rawl plugs and finishing the concrete/ brick work/ RRM after fixing/ embedding including getting hot dip galvanizing treatment of application of zinc coating of 460gsm (both side inclusive) as per IS:277 to all MS work in approved galvanizing plant etc. and applying two coats of approved metallic shade and colour of synthetic enamel paint over a two coats of a priming coat of approved zinc chromate steel primer etc. complete all as per specifications, drawings and as directed by the Engineer-In-Charge.

Supplying and fixing in position various dia GI pipe for sleeves, railing, ladder in PH shafts and at terrace for over head water tank, using 'B' class (medium duty) GI pipes of any diameter as per requirement and as per drawing for verticals and steps/ Railing/ spout/ sleeves etc. including cutting, bending, welded properly in line and level to the verticals, providing necessary bracings, hold fasts etc. at all levels and anchoring the ladder/ railing with necessary brackets fixed in cement concrete 1:2:4, finishing including painting all exposed surfaces with two coats of synthetic enamel paint of approved make and colour over a coat of approved primer etc. complete as per specifications, drawings and as directed by the Engineer in charge.

Supplying, applying and placing swellable type water stop tape of size 19mm x 25mm thick of expansive nature for construction joints of RCC walls of water tank including cleaning the construction joints of loose mortar and dust, applying primer @ as per manufacturer specification, unroll the water bar slowly and carefully on the joint without pulling and stretching it too much after the primer dries a little and became sticky and tying with the reinforcement bars as directed all complete as per manufacturer's specification.

Providing & fixing in position anodised Aluminium flats/ angles/ tees/ plates (upto 400mm wide & 6mm/8mm/10mm thick sheets)/ foils etc. of required size to cover the expansion joint in walls, floors, ceilings and columns etc. including drilling holes, chasing the surface wherever required, fixing with wooden gutties, rawl plugs and C.P brass screws, making oval shaped slot in aluminium on one side, fixing stainless steel washers, making good the concrete/ masonry surface, scaffolding etc. complete as per drawing, specification and as per instructions of Engineer in charge.

Providing and applying polysulphide sealing compound of size upto 150mm x 15mm of approved make for the edges of expansion board at all lead and lifts, horizontal, vertical, curve position including scaffolding, labour, wastage etc. all complete as per manufacturer's specification and as directed by the Engineer in Charge.

Providing and fixing 125mm thick Duraboard HD 100 filler board of M/s. Supreme Industries Ltd. for expansion joint at all floors and locations in RCC columns, beams, slab, brackets etc. including cutting, laying in position in line, level and plumb etc., as per manufacturers specifications including cost of all materials, labour, scaffolding etc. complete all as per specifications, drawings and as directed by the Engineer-in-charge.

Providing copper metal cradle of suitable width [approximate 450mm] for expansion/ separation joint at floor level, bent to shape, cutting, screwing, over lapping, etc. filled up with Bitumen filler including placing 20mm thick Kotah stone/18mm granite stone, laid over a coat of Hot Bitumen for entire length along the joint, to match the floor finish, fixing aluminium flats/ angles/ sheets (to be paid under relevant items) at bottom to cover the joint, cut to required size and shape etc. including cutting, positioning, supporting, wastages, filling with approved polysulphide, sealing compound, chipping the old concrete surface etc. including all tools and plants at all levels & location, all as per specification and as directed by the Engineer in charge. Note:- a) Granite/ Kotah stone is to be measured under relevant items. b) Polysulphide sealing compound shall be measured under relevant item. c) Fixing aluminium flats/ angles/ sheets shall be measured under relevant item.

Providing and fixing of 100% eco – friendly Light weight calcium silicate inorganic modular Acoustical light weight grid ceilings at all heights having 15 mm thick integral densified edges of Tegular/board edged of Size 595x595MM of M/S Aerolite Industries Pvt.Ltd. Manufactured using Non cementitious Calcium silicate Binders reinforced with eco- friendly inorganic Fibres with Minimum eco-friendly recycled content of 50% (For Green Buildings). The ceiling Tiles should be free from Chemicals, asbestos having Zero VOC for better indoor Air Quality as per requirements of IGBC / Griha. The ceiling tile should be of approved texture, design and patterns like Spectra / Quadra Spintone / Cosmos / Globe / Hexa / Plain having NRC (Noise Reduction coefficient) of 0.50 to 0.75 (for semi perforated and fully perforated range of tiles), Light reflectance of 85% (minimum). False ceilings shall be Tested and classified to fire classification class of A1(Non – Combustible), S1(Zero Smoke), d0 and it should be Mandatorily 100% Non-combustible as per BS: 476 Part IV, Part VI for Non-Flame spread & Part VII for Non flame Propagation & also classified as Non ignitable and smoke developed of 0-5 onlyin accordance with ASTM-E84 as per requirements of UL 723/

NFPA 101 of international buildingsafety code. False ceilings must have 100% RH Property guaranteed for 10 years free replacement for sagging/warping and bending. Thermal conductivity of 0.043 W/m°KC to 0.050 W/m°KC as per IS 3346/1980 (High Thermal Insulation). 100% Antifungal, Antibacterial confirming to JIS-Z-2801 and ASTM- G-21 certified by NABL accredited labs. The tiles shall have Thickness: 10 mm thick in the centre and 15mm thick all around on edge resting portion with integral densified edge. 350 kg/M3 in the centre 10 mm thick portion and 450 Kg/M3 cube on the edges, (Average 360 kg per cum as per ECBC Code 2007).The framework shall be suspended from ceiling by slotted cleats of size 25X35X1.6mm fixed to ceiling with 12.5mm dia and 50mm long dash fasteners and to be suspended by Galvanised 6mm Threaded rod up to 1000 MM Length with Galvanised L Shaped level adjuster of Size 76Z25 X 25 X 1.6mm length with MS Z Cleat of size 25 X 37 X 25

X each 1.6 MM with Pre-cut hole on the 25 mm Flanged, spaced at 1200mm centre to centre. The tile shall be laid on Main runner of size 24x32X0.3MM having 24 MM flange colour white having rotary stitching on all T sections, i.e., the main runner, 1200 mm & 600 mm cross tees with a web height of 28mm &0.3 thickness & load carrying capacity of 11-15kgs/Sqm. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge/Manufacturers Specification. Note:- The rate shall include the cost for the following :- (i) Vertical masking if any shall be measured under this itemwithout any extra cost.(ii) Providing necessary openings for light fixtures, diffusers,trap doors etc. to be made as per layout drawings. (iii)The main tees to be suspended from the ceiling / soffitwith the help of metal dash fasteners of 6mm x 50mm soffitcills of 25mm x 35x 1.60mm and 4mm dia G.I wire withgalvanised spring steel leveling clips. (iv) The entire grid system shall be designed to bear adistributed load of minimum 15 kg/sqm (v) Only Calcium Silicate False Ceiling area will be measuredfor the purpose of payment.

Providing and fixing Lattice jaali partitions in 12mm thick acrylic solid surface sheet of approved make manufactured as per guidelines of ISO19712. The material should be CNC cut to achieve the desired design as per Engineer. The CNC cut Acrylic solid surface sheets to be fixed with the help of Aluminum/Metal Box section/ Teak wood of 50x50x3mm from all the 4 sides/ teak wood/ oakwood frame. Single jaali of approx. size of 0.75mtr x 1.8 mtr or as per design & metal frame to be supported with the help of Hilti/ or approved fasteners. Adhesive of the same color. The rate is inclusive of framework, material and required pattern, shape, curved shape, at all lead and lifts and as approved. The Acrylic Solid Surfaces should be installed by company authorized Quality Fabricators. The 6mm routed CNC cut Acrylic solid surface sheets/ lattice jali to be fixed with the help of 25x25 mm Aluminum tube/ Terak wood or 25x25mm aluminium frame/ 25x25mm teak wood or 75x75mm class teak wooden frame from all the 4 sides of the lattice jaali. Lattice jaali frame to be supported with the help of Hilti/ or approved fasteners as per requirement. Please refer Additional Notes.

Providing and Fixing GRC Capitals of following sizes to column at all floors and locations of approved manufacture in line. Level, plumb, and Design, all as per architectural Drawings, Specification and Making various moulds/bands in C.M 1:3 as specified below, in proper line, Level, Shape and Design as shown in the Drawings and as directed by the Engineer-in-charge. Note:- Including cost of Chicken wire mesh used in Costruction. Chicken wire mesh shall not be paid separately.

GRC Flutted column with Base and Top Capital (Full Circumference) of size 600 mm dia, height as per drawing and as directed by the Engineer-in-charge.

Providing and fixing of signages of following sizes using Rigid sheet (A) ARS 10000 for the written matter (as described below), fixing to the base of 2mm thick Acrylic sheet using appropriate glue and stainless steel screw with washers etc. and providing arrangement for hanging the assembly to the ceiling including the cost of 2 sets of Stainless steel hangers, anchor fasteners, SS cover plates, hooks, etc. or fixing it to the wall, door as per drawings, complete as per manufacturer's specification and as per instruction of Engineer in charge.

size 300mm x 300mm for "EMERGENCY EXIT" model D 160 Autoglow, Hanging type.

size 200mm x 300mm for "STAIRS" "RAMP" model No. C 25 / D 160 Autoglow, Hanging type.

size 200mm x 400mm for "FLOOR NUMBER-X" model No. FE 25 Autoglow, Fixing to wall type.

size 300mm x 300mm for "ETC TOILET" model C 25. for fixing to wall/ door.

size 200mm x 300mm for "GENTS TOILET"/"LADIES TOILET"/ "ELECTRICAL PANEL ROOM" model No. C 25 for fixing to wall/door.

size 300mm x 400mm for "FLOOR PLANS (YOU ARE HERE)" model No. C 25 for fixing to wall/door.

Size 200 x 200 mm for "IN CASE OF FIRE DO NOT USE LIFT USE STAIRS/RAMP" with direction

Size 150 x 300 mm for LIFT / FIRE LIFT (HINDI AND ENGLISH)

size 100mm x 300mm for "FIRE SHAFT"/ "PH SHAFT"/"TELEPHONE SHAFT"/ "ELECTRICAL SHAFT"/ FIRE HOSE BOX/FIRE HYDRANT /FIRE ESCAPE/FIRE EXTINGUISHERS/FIRE ALARM CALL POINT/DG SET AREA / REFUSE AREA/UG TANK/SUB STATION/ELECTRICAL PANEL ROOM/PUMP ROOM

Providing and fixing acoustic wall paneling in exact pattern as per drawing using materials such as teak wood, glasswool (UP TWIGA), 'U' GI sheet channels made of 1.25mm thick bent to shape, Covering fabric for glasswool and in addition fabric topping for acoustic purposes of best approved quality and colour in perfact workmanlike finish and combining the wall paneling as per drawing, all as per drawing including all necessary brass screws, tools plants all complete. (Refer drowing)

Glasswool Panel of approved make 100mm thick including wrapping with fiber glass tissue covering cloth all round and encasing and making panels with edging of 'U' channels bent to shape made out of 1.25mm thick GI sheet Jindal make 100mm wide including providing and fixing Top fabric covering all round of approved quality and color for Glasswool panel for 100mm glasswool panel including providing and fixing Urathane 10mm thick foam backing including providing and fixing central TW 50mmX25mm central beading between two panels

Glasswool Panel of approved make 50mm thick including wrapping with fiber glass tissue covering cloth all round and encasing and making panels with edging of 'U' channels bent to shape made out of 1.25mm thick GI sheet Jindal make 50mm wide including providing and fixing Top fabric covering all round of approved quality and color for Glasswool panel for 100mm glasswool panel including providing and fixing Urathane 10mm thick foam backing including providing and fixing central TW 50mmX25mm central beading between two panels

Providing and fixing 18mm marine ply wall paneling in the pattern as per drawing with 3mm thick veneer topping with 2 coats of approved melamine polishing in 50mm and 100mm projected paneling as per drawing all complete as per drawing, specification and as directed by Engineer Incharge.

Providing and fiixng wall cladding consist of combination and design using Wooden & ACP panels as per design, drawings, patterns, colour etc. and including all labour, material, wastage etc. complete all as per specification & as directed by the EIC.

Providing and fixing wall paneling at all levels and locations of approved make. a) Providing and fixing wall panelling at all levels and locations of approved makes for lower reaches consists of following items of work: (i) Fixing Strut framework system of M/s Anutone or equivalent consists of GI Strut CC50 of thickness 0.55mm, length 3600mm, knurled web 40mm, depth 10mm and equal flanges 15mm fastened to the wall positioned vertically at 600 mm c/c (ii) Strut CC18, aluminium core cross channel, thickness 0.5mm, length 2400mm, web 15mm & 27mm, depth 18mm and flanges of 7mm with suitable edge & center brackets is then fixed perpendicular to the Strut CC50 with the help of fasteners at 400mm c/c (iii) Filling the strut framework with 50 mm thk. Approved quality synthetic polyfibre of density 10 Kg/Cum and fixing it over wall with suitable adhesive (iv) Fixing approved quality Slats Surco Plus or equivalent pinewood E1 grade groove perforated fiberboard of density 700 -750 Kg/Cum, weight 9-11 Kg/Sqm and 5-test fire retardant grade of size 128 x2440x16mm or as approved with melamine laminated finish and tongue-groove edge for a using suitable fasteners. The rate shall include all tools, tackles, screws, nut bolts, wastages, scaffolding etc.complete complete all as per specification, drawings & as directed by the Engineer-in-charge.

Designing, providing and fixing of 4 mm thick approved make and shade Aluminium Composite Metal Panel (ACP) of approved make cladding at different locations, levels and floors, including soffits of over-hangs but excluding aluminium frame work with grids filled in with weather silicon sealant as per the drawings. The ACM panel composition shall be of 0.5 mm thick PVDF coated aluminium sheet + 3 mm thick low density polyethelene virgin resin core + 0.5 mm thick polyester (PVDF) coated Aluminium sheet, including all necessary cutting, wastage, bending, fixing, screws, washer all complete as per approved shop drawings and specifications and as directed by EIC. (Aluminium frame work will be paid under relevant item) Note:- ACP shall be measured to the actual visible area of the ACP sheet including silicon joints as fixed on the site.

Supplying and fixing in position at all floors, levels & locations aluminium section [extruded] for frame work of ACP cladding etc as per drawing and of approved shape, size, section of approved manufactures with sections having size and weights as shown in the drawing for framing work and including all labours, cutting, wastage, fixing in position with wall, RCC members etc using heavy duty screws/anchor fasteners/ clip/ rawl plug, drilling, grouting etc complete all as per drawings, specifications and as dirtected by EIC. Note:- Approval of the department for the complete design and shop drawing shall be obtained before commencement of the fabrication work.

TOTAL OF PART I-L : MISCELLANEOUS WORKS

PART I-M : DEVELOPMENT WORKS

Earth work excavation over areas in allheights/ lifts for Site Development, Massexcavation, Road etc. to required profile,level, grade, camber etc. in all soils asmentioned below including dressing ofexcavated area, filling the low spots/areas with approved excavated earth inlayers not exceeding 250 mm watering,consolidation etc. and stacking/disposing the surplus excavatedmaterials within a lead of 150 m. and allinherent lifts etc. to the requiredlocation as directed by theEngineer-in-Charge.

For all soil other than soft rock and hardrock.

Soft rock

In hard rock by chiselling or by usingmachines such as poclain with jackhammer etc.

Supplying and laying water boundmacadam (WBM) sub-base with90-45mm size stone aggregate, stonesscreeding of 12.5mm max. size in layersas specified below, each layer of 150mmthick laid loose and consolidated to115mm thickness including breakingstone if required, screening, sorting,spreading to regular line, level, templateand supplying and blinding with stonedust, watering, consolidating each layerproperly with 8 to 10 tonnes power rollerincluding cost of all materials, labour,finishing to proper gradient, camber etc.complete as per specifications & asdirected by the Engineer-in-Charge.

230mm consolidated thicknessconsisting two layers of layer of 115mmthick each.

Supplying and stacking hand brokenstone aggregate 63-45 mm graded metalat the site of work for pre measurementall as per specifications and as directedby the E-I-C.

Supplying and stacking graded murrum of approved quality at site of work ( forwater bound macadam only) broughtfrom approved source at the site of workfor pre measurement all complete as perspecifications & as directed by theEngineer-in-Charge.

Proof rolling with 8/10 tonne powerroller over sub-base of the road toachieve proper consolidation includingwatering etc.complete as perspecifications, drawings and as directedby the Engineer-in-Charge.

Forming Water Bound Macadam road of75mm consolidated thickness includingpreparing sub-grade, screening, sorting,spreading to template 63-45mm grademetal, consolidation by 8 to 10 tonnepower road roller, spreading andconsolidation of blinding materials,watering etc. complete all as perspecifications and as directed by theEngineer-in-Charge. (Metal and blindingmaterials shall be paid under relevantitem.)

Providing and fixing precast water table, of approved make and splay or flush type made of cement concrete of grade M-40 (using graded stone aggregate of 20 mm thick max. size) of approx. size 500 X 325 mm and 100 mm thick, including necessary form work, consolidation, finishing. curing, fixing with ready mix mortar (having CM 1:3), jointing and pointing in ready mix mortar (having CM 1:3) etc. complete as per specifications and as directed by Engineer-in-Charge.

Providing and laying at or near ground level factory made Bull nose kerb stone (size 600x450x125mm) of approved manufacturer of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints (average thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment).

Providing and laying 50 mm thick hotmixed and hot laid bituminousmacadam using graded metal 32mmdown, bitumen not less than 3.7% byweight of total mix of grade 60/70;including cleaning the existing waterbound macadam road surface/asphaltroad surface by wire brushing,brooming, providing tack coat at 7.5 kgof bitumen per10 sq. Mtr., mechanicalmixing, transporting, mechanicalspreading, machine laying to requiredline, level, camber and compactingthoroughly with 8 to 10 tonne powerroad roller etc. complete as perspecifications and as directed by theEngineer-in-Charge.

Providing and laying hot mixed hot laidpremixed bituminous seal coat of 25mm consolidated thickness over asphaltmacadam as wearing course on roadsurfaces using 7.25(+/-) 0.25%bituminous grade 60/70 includingmachine mixing, laying by mechanicalspreading machine and compactingthoroughly by 8 to 10 tone power rolleretc. to correct level and line, grade,camber etc. complete all as perspecifications and as directed by theEngineer-in-Charge.

Painting two coats of synthetic enamelpaint to kerb stone, and other areaswith approved brand and manufactureof required colours over a coat ofapproved primer etc. including cleaningthe surface throughly all as perspecifications, drawings and as directedby the EIC.

Painting the lane marking strips 2.5mmthick on asphalted/concrete roadsurfaces, mechanically withretro-reflective thermoplastic roadmarking of approved shade ofTHERMOLINE of M/s. Asianpaints ltd.Or approved equivalent confirming toBS 3262 PART 1/ 1989 or latest version,including heating the raw material to180-200 degree celsius in the pre heaterwith adequate agitation till it becomeshomogenised liquid for painting,including cleaning painting onpedestrian crossing, speed brakers etc.including providing all safety measureslike barricading the roads,dividers etccomplete all as per specification of themanufacturers and as directed byEngineer inCharge.

Providing, laying & fixing precast Grass Paver Tile of approved design and of make M/s. Super Tile or approved equivalent, laid over a layer of 50 mm thick stone dust mixed with red murum over well consoildited sub-base including filling the joints with redmurrum etc.transporting to site, placing to proper line & level etc including cost all material , labours, tools wastage etc complete as per specficification drawing as directed by E-I-C

60 mm thick Grass Paver Tile of approved size,design and colour etc.

Providing, laying & fixing precast interlocking paver blocks of following grade of approved make, over a layer of 50mm thick stone dust over well consolidated sub-base including filling the joints with stone dust etc., transporting to site, placing to proper line & level, finishing the top surfaces with two coats of lacquer finish etc. including cost of all materials labour, tools etc. complete as per specifications, drawings and as directed by Engineer-in-Charge.

80mm thick with paver block of M40 grade of approved design and colour

With earth available from nearby boroow pits with all leads, lifts upto 10KM.

Supplying precast fibre reinforced concrete perforated frame and covers for storm water drains / chambers, approved by BMC / Engineer in Charge of approved manufacturer, tested to ultimate load as per IS 1726 (part-I; latest revision) including transporting, placing in position etc.complete as per specifications and as directed by the Engineer in Charge.

Heavy duty perforated covers M-50 to withstand Heavy traffic tested as per IS-1726, cover of approximate size 700x550 mm and thickness not less than 100mm, having 75mm bearing with circular holes as required and frame with size 850x700x150 mm thick as per specification, drawings and as directed by the Engineer in Charge. Note : The thickness indicated is minimum requirement. However the rates are inclusive for higher thickness of drain covers as per the design requirement specified by Manufactureres.

TOTAL OF PART I-M : DEVELOPMENT WORKS

Description of Work / Item(s)

Amount

ABSTRACT FOR PART II : PHE WORKS

PART IIA : Sanitarywares & C.P Appurtenances.

PART IIB : Internal Water Supply System

PART IIC : Internal Drainage System

PART IID : External Water Supply System

PART IIE : External Drainage System

PART IIF : Roof Rainwater Harvesting

Description of Work / Item(s)

Amount

PART II : PH WORKS

Part II-A : Sanitarywares & C.P Appurtenances. Note:- 1) All sanitaryware shall be provided from same brand 2) All CP fittings / Fixtures (except jet spray) from same brand shall be provided.

Providing and fixing in position following Vitreous China Wall Hung type Wash down pattern water Closet consisting following items of work:- i) Providing Vitreous China wall hung type wash down pattern Water Closet ( EWC ) conforming to IS 2556 (part XVI) with integral "P" trap outlet with water seal not less than 50 mm with vent and necessary C.I. brackets supports. ii) Providing thermosetting or thermoplastic Seat & cover conforming to IS 2548, fixing seat & cover for water closet as per manufacturer's specification including the cost of corrosion resistant hinges, bolts, nuts, non ferrous or S.S washer etc. all complete. iii) Fixing the Water closet in position, jointing the trap, water closet and UPVC pipe by Epoxy grout or Rubber seal as per pipe manufacturer. iv) Cutting hole, making grove or chases in the wall, floors, slabs etc., reinstating to it's original condition after completion of work, painting all metallic parts with two coats of flat oil paint of approved make & shade over a coat of primer, finishing the gaps with white / matching colour cement etc. all complete. v) Testing the system to the full satisfaction of the Engineer-in-Charge.

Vitreous China European Water Closet of Starwhite/snow white/bright colour with P trap of "Hindware" Cat. No. 20069/20097 Lara model with slow falling seat cover or Cera cat. No. S1041111 Cruse model with slow falling seat cover or Parryware Cat. No. C0264 Cardiff model with slow falling seat cover.

Providing and fixing in position following Vitreous China Indian water Closet consisting following items of work:- i) Supplying Vitreous china Indian water closet ( Box rim pattern ) of following type conforming to IS:2556 ( part-II ) with integral foot rest, W.C Connector and PVC "P" or "S" trap having water seal not less than 50 mm with / without vent as per requirement. ii) Fixing the Water closet in position, jointing the trap, water closet and UPVC pipe by Epoxy grout or Rubber seal as per pipe manufacturer. iii) Cutting hole, making grove or chases in the wall, floors, slabs etc., reinstating to it's original condition after completion of work, painting all metallic parts with two coats of flat oil paint of approved make & shade over a coat of primer, finishing the gaps with white / matching colour cement etc. all complete. iv) Testing the system to the full satisfaction of the Engineer-in-Charge.

Vitreous China Water Closet of 580 x 440 mm size of Starwhite/snow white/bright colour as per Hindware Cat. No. 20042 "Orissa Pan Eco" model or Cera cat. No. S3020105 "Orrisa Pan Cable" model Or Parryware Cat. No. C0117 "Orrisa Pan" model with PVC / ceramicTrap (with/without vent) & WC connector etc.all complete.

Providing Flushing arrangement to Water Closets including providing and fixing manually operated PVC low level Flushing Cistern consisting following items of work:- i) Providing PVC low level flushing cistern with all inside syphonic fittings, duly assembled conforming to IS:7231 of in etc.as per the manufacturer's recommendation all complete.position using CP brass screws, rawl plugs, bracketsapproved make with handle, fixing the cistern ii) Providing 40/32 mm dia.uPVC (6Kg) flush pipe from Flush tank to Water Closet, concealed in the wall as directed making connection with W.C pan including the cost of fittings, fixtures and jointing materials etc. all complete including providing & fixing 15 mm dia. PVC coupling with mosquito proof jalli at overflow outlet. iii) Cutting hole, making chases in the wall, floors, slabs etc. and reinstating the surface to the original condition,painting all metallic parts with two coats of flat oil paint of approved make and shade over a coat of primer,finishing the gaps with white/ matching cement etc. all complete. iv) Testing the entire system to the full satisfaction of the E.I.C. manufacturer.

Flushing arrangement with low level Dual Flush Cistern of Starwhite/snow white/bright colour as per Hindware "Sleek Essence Dual Flush" model or Cera cat. No. B1020106 "Compass Twin Flush" model or Parryware Cat. No. E8110 "Slimline Dual Flush Deluxe" model for WC.

Providing and fixing first Quality Vitreous China Wash Hand Basin Consisting following items of work:- Providing Vitreous China over the counter type Wash Basin of Star white ( standard ) colour of following make conforming to IS:2556 and placing it in position over the granite platform as shown in the drawing or as directed including finishing the joints with white cement all complete. i) Providing Wash Basin and placing it in position as shown in the drawing or as per manufactures specification or as directed including finishing the joints with white / matching colour cement all complete. ii) Providing/Fixing various CP fittings such as Waste Coupling of Jaquar Cat No. 705/ 705L130/709/709L130, Bottle Trap of Jaquar Cat. No. 769 including fixing 32/40/50 mm minimum 10kg class PVC pipe conforming to IS:4985 (and fittings conforming to IS:7834). Placing and fixing Waste Pipe from Bottle trap to adaptor / Nahani trap / Floor Trap. iii) Fixing the Wash Basin in position, including providing M.S./C.I. Brackets & Screws for the basin

iv) Cutting hole, making grove or chases in the wall, floors, slabs etc., reinstating to it's original condition after completion of work, painting all metallic parts with two coats of flat oil paint of approved make & shade over a coat of primer, finishing the gaps etc. all complete as directed by Engineer-in Charge. v) Fixing Vitreous China under / over the counter / semi recessed / over table type Wash Basin of following model and make conforming to IS:2556 and placing it in position with the granite platform as shown in the drawing or as directed including finishing the joints with white cement all complete. vi) Testing the system to the full satisfaction of the Engineer in Charge

Vitreous China Wash Hand Basin of StarWhite colour of Hindware Cat. No. 10049 "Zen" model or Cera Cat. No. S2030104 "Oval" model or Parryware Cat. No. C0407 "Cascade NXT" model, under counter model.

Vitreous China Wash Hand Basin of StarWhite colour of Hindware Cat. No. 10096+11038 "Studio" model or Cera Cat. No. S2040112+S2090120 "CONCORD" model or Parryware Cat. No. C0460+C0316+C8302 "Flair" model, counter model.

Vitreous China Wash Hand Basin of StarWhite colour of Hindware Cat. No. 10079 "Magna" model or Cera Cat. No. S2020137 "Calburt" model or Parryware Cat. No. C041L "Inslim" model, under counter model.

Providing and fixing urinal of approved make consisting following items of work i) Providing urinal of approved make, and placing it in position as shown in the drawing or as per manufactures specification or as directed including finishing the joints with white / matching colour cement all complete ii) Providing various CP fittings such as Waste Coupling of Jaquar Cat No. 705/709, Bottle Trap of Jaquar Cat. No. 769 including provision and fixing 32 mm minimum 10kg class PVC pipe conforming to IS:4985 (and fittings conforming to IS:7834) Waste Pipe f iii) Fixing the urinal in position, including providing M.S. Brackets & Screws for the urinal as per Manufactures specification or as directed by Engineer-in Charge. iv) Cutting hole, making grove or chases in the wall, floors, slabs etc., reinstating to it's original condition after completion of work, painting all metallic parts with two coats of flat oil paint of approved make & shade over a coat of primer, finishi v) Testing the system to the full satisfaction of the Engineer in Charge

Vitreous urinal of Starwhite/snow white/bright colour as per Hindware Cat. No. 60010 "Dyna" model or Cera cat. No. S4020113 "Civic" model or Parryware Cat. No. C0580+C8123 "Whiz" model with connector etc.all complete.

Supply and installation of Besco by Merino Urinal Modesty Panels series of width and depth as per specifications/site drawings, Made from solid grade compact high-pressure laminate with density of minimum 1400g/cm^3 as per IS:2046 and EN 438 manufactured under high specific pressure > 5 MPa and temperature of minimum 120°C with bunch of kraft papers impregnated with thermosetting phenolic resin and decorative papers made of cellulose fiber impregnated with thermosetting melamine resin which provide superior scratch, abrasion, heat, chemical, impact, graffiti and moisture resistance along with anti-bacterial properties and anti-fungal (conforming to ISO 22196 : 2007) properties. Panels have a black core that when machined, presents a distinctive black edge. HPL Compact panels should be tested as per BS EN:438-2:2016, Cl. 17 method for dry heat and should have value of -0.1 for longitudinal direction and transverse direction as per EN438. HPL Compact panels should be tested as per BS EN:438-2:2016, Cl. 17 method for high humidity and should have value of 0.5 for longitudinal direction and transverse direction as per EN438. HPL Compact panels should have tested as per BS EN ISO 178 for flexural modulus(N/mm^2) and should have value more than 10500 N/mm^2 in longitudinal and transverse direction.

HPL Compact panels should have tested as per ISO: 527-1:2019 for tensile strength (N/mm^2) and should have value more than 90 N/mm^2 as per EN438 in longitudinal and transverse direction. HPL Compact panels should have tested as per BS EN:438-2:2016, CI.12 for Resistance to Immersion in Boiling Water and should have value less than 1.4 in Mass increase and less than 0.85 in thickness increase. Remaining all as per shown in the drawing or as per Manufactures specification or as directed by Engineer-in Charge. THICKNESS OF HPL COMPACT PANEL: 12mm HARDWARE: SS 304 or nylon PA-6 made brackets are used for fixing the UMP panels to the wall Size – 500mm x 1200mm

Providing Flushing arrangement to Urinal including providing and fixing Sensors / manually operated flush valves consisting following items of work:- i) Providing and fixing flush valve/Sensor in position as per the manufacturer's recommendation, making water inlet connections all complete. ii) Providing & laying 15 mm dia.cPVC (SDR 11) / 15 mm n.b GI class 'C' Flush Pipe / CP brass inlet connection from Flush Valve / Sensor to Urinal, concealed/exposed in the wall as directed making connection with Urinal spreader and flush valve / Sensor including the cost of heavy quality CP brass Spreader combatible to the Urinal, necessary fittings, fixtures, jointing materials etc. all complete. iii) Cutting hole, making chases in the wall, floors, slabs etc. and reinstating the surface to the original condition, painting all metallic parts with two coats of flat oil paint of approved make and shade over a coat of primer, finishing the gaps with white/ matching cement etc. all complete. iv) Testing the entire system to the full satisfaction of the E.I.C.

Flushing arrangement with flush valve of Jaquar 'Sensor' make Cat No.SNR-STL- 51087, Flush bend, cutting hole, testing etc.for Urinal or approved equivalent of Roca/Toto make.

Providing braided hose with nuts, nipples etc. for Water supply Inlet connection of following make for wash basin, flush tank, kitchen sink etc with brass check nuts on both ends and fixing it in position as directed including the cost of jointing materials and testing for leak proof joints all complete.

450 mm long Braided hose of Jaquar cat. No. ALD-805B or approved equivalent of Roca/ Toto make

Providing & fixing in position best quality bevelled edge plate Glass Mirror with PVC frame of following size with 6 mm thick marine ply wood (confirming to IS:710 : 2010) , fixed with required numbers of CP brass cup screws and caps, washers etc. including drilling holes, providing & fixing rawl plug in RCC/ brick wall, wooden packing behind the mirror if necessary, reinstating the damages to its original condition etc. all complete as directed by EIC.

6 mm thick Plate glass Mirror of size 600 mm x 450 mm / 900mm high and 1200mm wide with 6 mm thick beveled edge mirror of superior glass (of approved quality) complete fixed with SS Brackets, screws, SS Studs and washers complete.or as directed by the E.I.C

Providing & fixing in position following approved quality CP fittings / Fixtures of 15 mm nominal dia. with ISI mark / approved make of following type including providing & fixing specials, wall flanges and fixing to concealed / exposed pipe line with leak proof threaded joints using tephlon tapes, testing the joints hydraulically to a pressure of 10 kg./ sq.cm, rectifying the leaky joints. if any, including cleaning etc. complete all as per specification.

C.P. brass 2 Way Bib Cock with wall flange of Jaquar Florentine' Cat.No.FLR-5041N or approved equivalent of Roca/ Toto make

CP brass 2 Way Bib Cock with wall flange of Jaquar Cat. No. SOL-6041 or approved equivalent of Roca/ Toto make for Paralegic WC

C.P. brass wash basin Pillar Tap of Jaquar 'Sensotronic' make Cat No.SNR-51021, or approved 'equivalent of Roca/Toto make.

C.P. brass Angular Stop Cock with wall flange of Jaquar Florentine' Cat. No. FLR-5053N or approved equivalent of Roca/ Toto make

CP brass Angular Stop Cock with wall flange of Jaquar Cat. No. SOL-6053 or approved equivalent of Roca/ Toto make for Paralegic WC and wash basin

C.P. Health Faucet with 8 mm dia 1.5 m long flexible tube & Wall Hook of Jaquar Brand 'Allied' Cat. No. ALD-587 or approved equivalent of Roca/ Toto make

C.P. brass Sink Cock with wall flange of Jaquar Florentine' Cat. No. FLR-5347SD/FLR-5357SD or approved equivalent of Roca/ Toto make

CP brass Shower and Arm with wall flange of Jaquar Cat. No. OHS-1789 and SHA- 477.

CP brass Wall Mixer with provision of Bath & Overhead Shower complete with Bend Pipe and wall flange of Jaquar Cat. No. FLR-5273UPR

Providing and fixing the following C.P. Brass Bathroom / toilet accessories of following make and fixing on the wall using C.P. brass screws, rawl plugs etc. as per manufacturer's requirement all complete at the locations shown and as directed by the E-in-C.

C.P. Brass Toilet paper Roll Holder of Jaquar Continental' Cat. No. ACN -1121BN or approved equivalent of Roca/ Toto make

C.P. brass single Towel Rail/Ring of Jaquar 'Continental' Cat. No. ACN - 1111BNM or approved equivalent of Roca/ Toto make

C.P. brass double coat hook as per 'Continental', Jaquar make Cat. No. ACN -1161N or approved equivalent of Roca/ Toto make

CP brass Soap Dispenser with Glass Bottle of Jaguar Cat. No. 1135N or approved equivalent of Roca/ Toto make

Providing and fixing in position following Vitreous China Padastal type Wash down pattern water Closet, Wash Basin and supporting rails for Paraplegic consisting following items of work:- i) Providing Vitreous China padastal type wash down pattern Water Closet ( EWC ) conforming to IS 2556 (part II) with integral "P" trap outlet with water seal not less than 50 mm with vent and necessary supports. ii) Providing thermosetting or thermoplastic Seat & cover conforming to IS 2548, fixing seat & cover for water closet as per manufacturer's specification including the cost of corrosion resistant hinges, bolts, nuts, non ferrous or S.S washer etc. all complete. iii) Fixing the Water closet in position, jointing the trap, water closet and UPVC pipe by Epoxy grout or Rubber seal as per pipe manufacturer. iv) Providing Wash Basin and placing it in position as shown in the drawing or as per manufactures specification or as directed including finishing the joints with white / matching colour cement all complete.

v) Providing various CP fittings such as Waste Coupling of Jaquar Cat No. 705/709, Bottle Trap of Jaquar Cat. No. 769 including fixing 32 mm minimum 10kg class PVC pipe conforming to IS:4985 (and fittings conforming to IS:7834). Placing and fixing Waste Pipe from Bottle trap to adaptor / Nahani trap / Floor Trap. vi) Fixing the Wash Basin in position, including providing M.S./C.I. Brackets & Screws for the basin vi) Fixing grab rails as per drawing or manufacturer's recomandations vii) Cutting hole, making grove or chases in the wall, floors, slabs etc., reinstating to it's original condition after completion of work, painting all metallic parts with two coats of flat oil paint of approved make & shade over a coat of primer, finishing the gaps with white / matching colour cement etc. all complete. vi) Testing the system to the full satisfaction of the Engineer-in-Charge.

Vitreous China European Water Closet Paralegic set of Starwhite (Standard) colour with P trap of Hindware make Cat. No. 70002 Matrix Set-1 consisting of Wash Basin 65 x 35 with one pair mounting brackets, EWC & Cistern complete with fittings & seat cover, one no. hinged rail 76 cm and four nos of grab rails 60 cm.

Supplying Stainless steel Sink of following size with or without Drain board, approved make, moulded out of 19 SWG (1 mm ) stainless steel sheet of grade AISI 304 (18/8) with waste coupling conforming to IS:13983, placing and fixing the Sink in position to correct line and level with basket type choke-stop strainer ( waste coupling ), Check nuts etc. including the cost of jointing materials, finishing the edges with white / matching colour cement as per manufacturer's recommendation all complete as per specification and as directed by EIC.

Stainless steel Sink 'Nirali- Elegance Ultra' Large with Drain board and with 'Satin' finish of overall size 1000 x 510 mm ( Bowl size 560 x 410 x 215 mm )

Supply and installation of Merino-Besco Ceiling Hung series cubicles of width and depth as per specifications/site drawings, Made from solid grade compact high-pressure laminate with density of minimum 1400g/cm^3 as per IS:2046 and EN 438 manufactured under high specific pressure > 5 MPa and temperature of minimum 120°C with bunch of kraft papers impregnated with thermosetting phenolic resin and decorative papers made of cellulose fiber impregnated with thermosetting melamine resin which provide superior scratch, abrasion, heat, chemical, impact, graffiti and moisture resistance along with anti-bacterial properties and anti-fungal (conforming to ISO 22196 : 2007) properties. Panels have a black core that when machined, presents a distinctive black edge. HPL Compact panels should be tested as per BS EN:438-2:2016, Cl. 17 method for dry heat and should have value of -0.1 for longitudinal direction and transverse direction as per EN438. HPL Compact panels should be tested as per BS EN:438-2:2016, Cl. 17 method for high humidity and should have value of 0.5 for longitudinal direction and transverse direction as per EN438. HPL Compact panels should have tested as per BS EN ISO 178 for flexural modulus(N/mm^2) and should have value more than 10500 N/mm^2 in longitudinal and transverse direction.

HPL Compact panels should have tested as per ISO: 527-1:2019 for tensile strength (N/mm^2) and should have value more than 90 N/mm^2 as per EN438 in longitudinal and transverse direction. HPL Compact panels should have tested as per BS EN:438-2:2016, CI.12 for Resistance to Immersion in Boiling Water and should have value less than 1.4 in Mass increase and less than 0.85 in thickness increase. Remaining all as per shown in the drawing or as per Manufactures specification or as directed by Engineer-in Charge. DOORS: All doors will be of single colour and made of 18 mm thick Merino HPL compact panel. The doors will have chamfered edges. Each door will be supported by 3 stainless steel hinges affixed to the pilasters. Stainless steel coat hook and doorknob are provided with each door. All the doors will be routed at the vertical ends and the rubber sponge lining will be incorporated at the routed ends.

PILASTERS: All pilasters will be made of 18 mm thick Merino HPL compact panel. The pilasters are affixed to the mild steel rectangular plates (250 mm x 75 mm x 6 mm) and the plates are, in turn, fixed with the top rail. The assembled parts will be concealed by the stainless steel made box-up fixture. The pilasters will be routed at their vertical ends to facilitate proper closure of doors. The visible height from finished floor level to false ceiling is 2400 mm, including a floor clearance of 100 mm. DIVIDERS: All intermediate partitions or dividers will be made of 12/18 mm thick Merino HPL compact laminate panels. They are affixed with stainless steel made F-channel at their ends for ultimate stability of the system.

HARDWARE AND ACCESSORIES: • H shaped (Top) head frame structure made of extruded Aluminum grade 6063 T50-5 micron epoxy powder coated for surface protection. Size to be 125 mm x 71 mm x 5 mm • Corner joinery section, size to be 40 x 15.5 x 1.8T • U-Channel Wall joinery section, size to be 22 x 16 x 1.6T • Door stopper section, size to be 19.5 x 12.3 x 1.5T • Spring loaded butt hinges made from stainless steel grade 304. Surface finish to be matt type. Covers to be lacquer coated • Coat hook with rubber stopper made from stainless steel grade 304. Surface finish to be lacquer type • Round Door knob diameter 30 mm with grooves for better hand grip made from stainless steel grade 304. Surface finish to be lacquer type • Rotating thumb-turn locking system with privacy indicator made from stainless steel grade 304. Surface finish to be lacquer type • Stainless steel grade 304 screws CEILING HUNG SERIES CUBICLES: STD. SIZES Ceiling Hung Series Cubicles: Std. Sizes (W x D x H): 900 mm x 1550 mm x 3000 mm, (Height is including 100 mm gap from bottom) Door Width - 600/610 mm OR AS PER DRAWING

TOTAL OF Part II-A : Sanitarywares & C.P Appurtenances.

Part-II- B : Water Supply System

Supplying & fixing on Exposed surfaces the following sizes uv-stabilized Chlorinated Poly Vinyl Chloride (CPVC) pipes & Fittings of specified class having thermal stability for both hot & cold water supply consisting following items of work:- i) Supplying CPVC pipes and all required CPVC plain and brass threaded fittings, SDR - 11 having thermal stability for hot & cold water supply of approved make conforming to IS:15778 with ISI mark for CPVC pipe having nominal size up to 50 mm and conforming to ASTM F 441 (IPS SERIES) Schedule 40 for CPVC pipe having nominal size 65 mm (2 ½”) and above. ii) Supplying & providing providing CPVC/GI flanges, any other required specials and other jointing materials for connecting the CPVC pipe lines with spool pieces of water tank and for connecting the CPVC pipe lines with any fittings & fixtures etc., of the water supply line iii) Laying and fixing the pipe and specials on exposed surfaces/ underground, to correct line, level and plumb for water supply line, using metal straps ( On wall surfaces ) at 1.00 mtr. interval or as directed by the EIC.

iv) Jointing the pipes and Specials using Solvent cement conforming to IS:15225 & Teflon tape ( For threaded joins ) of approved makes including cutting the pipe to required size, preparation of surfaces, necessary tools etc. all complete. v) Cutting or making hole or chases in RCC or brick work structure such as wall, column, beam, slab, chajja, dado etc. for passing the pipe line and reinstating all the damage to its original condition. vi) Testing the pipe line as per relevant code to a hydraulic pressure of 10 Kg / Sq.cm to assess leakages if any, rectifying the defect, retesting etc till water tightness of pipe line is ensured. vii) CPVC pipes and fittings/ specials shall be of same brand. NOTE: 1) The rate shall also include for cPVC pipe & specials required for making connections with the existing GI/ CPVC/ PP-R pipe line laid by other agency. 2) All threaded joints shall be made with brass threaded fittings only. 3) Exposed pipe fixing arrangement include providing & fixing slotted G.I. section & U clamps bolts arrangement for grouping of pipe. Sloted section thickness should not be less than 2mm.

Pipes and Fittings SDR-11 as per IS:15778 15 mm (½") n.size

20 mm(¾") n.size

25 mm (1")n.size

32 mm (1¼")n.size

40 mm (1½")n.size

50 mm(2") n.size

cPVC pipe as per ASTM Sch. 80 65 mm (2½")n.size

80 mm (3") n.size

100 mm (4") n.size

Supplying, fixing & concealing on wall / beams / columns etc. the following sizes UV- stabilised Chlorinated PolyVinyl Chloride (CPVC) Pipes & (male / female) brass threaded fittings Fittings of specified class having thermal suitable for both hot & cold water supply & suitable for fixing various fittings & fixtures such as taps, jet sray, wall mixture, concealed stop cock, flush valves etc., consisting following items of work :- i) Supplying CPVC pipes and all required CPVC plain/ and brass threaded fittings, SDR - 11 having thermal stability for hot & cold water supply of approved make conforming to IS:15778 with ISI mark for CPVC pipe having nominal size up to 50 mm and conforming to ASTM F 441 (IPS SERIES) Schedule 40 for CPVC pipe having nominal size 65 mm (2 ½”) and above. ii) Laying and concealing the pipe and specials for water supply by cutting/ making 75 mm X 75 mm groove on the wall, fixing the pipe using metal straps wherever required and filling the groove with cement mortar mixed with water proofing compound, after laying and testing the pipe line including making leak proof joints using cement solvent/ Teflon tape ( For threaded fittings) of approved make, cutting the pipe to required length, preparation of surface, necessary tools etc. all complete.

iii) Cutting or making hole or chases in RCC or brick work structure such as wall, column, beam, slab, chajja, dado etc. for passing the pipe line and reinstating all the damage to its original condition. iv) Testing the pipe line as per relevant code to a hydraulic pressure of 10 Kg / Sq.cm to assess leakages if any, rectifying the defect, retesting etc till water tightness of pipe line is ensured. v) CPVC pipes and fittings/ specials shall be of same brand. NOTE:- 1) The rate shall also include for cPVC pipe & specials required for making connections with the existing GI/ PP-R/ CPVC pipe line laid by other agency. 2) All threaded joints shall be made with brass threaded fittings only. 3) All concealed cPVC pipes provided for PH work shall be measured under this item.

Pipes and Fittings SDR-11 as per IS:15778 15 mm (½") n.size

20 mm(¾") n.size

25 mm (1")n.size

32 mm (1¼")n.size

40 mm (1½")n.size

50 mm(2")n. size

Providing, instaling, fixing, connecting, testing 75 micron Super-Clean 'Y' Deluxe filter, of M/s. Jain Irrigation Systems Ltd., of following Model Nos, fitted with pressure gauge, water drain and emptying plug. etc all as per specifications, Drawings and as directed by EIC.

DSCYM080 with flanges, Max. working pressure = 10 kg/cm², Flow rate = 80 m³/hr, Inlet/Outlet Connection = 4" NOTE: 1) Item includes providing treaded or flanged conection with pipe including all matterial and labour required. 2) For threaded conection Union shall be provided. 3)All Super Clean filter provided for PH work will be measured under this item.

Providing and Fixing Ball Valve as per relevant IS suitable for pipe pressure class with body of bronze and ball & stem of Stainless Steel of approved make with fittings & material for conectivity and labour, making water proof joints, including cost of jointing material and CPVC specials if required & testing the joints. etc complete as per directions of engineer-in-charge.

15 mm (½") n.size

20 mm(¾") n.size

25 mm (1")n.size

32 mm (1¼")n.size

40 mm (1½")n.size

50 mm (2") n.size

65 mm (2½") n.size

80 mm (3") n.size

100 mm (2") n.size NOTE: 1) Item Includes Flange jointing with required new flanges and hardware . 2) Wherever required union joint shall be provided in pipe to facilitate removal of valve. 3) Threaded fittings of CPVC shall be of Brass Threaded only. Brass threaded CPVC fittings will be measured and paid under relavent item 4) All bronze ball valves provided for PH work will be measured under this item

Providing high pressure "HP" following size Float Valve assembly (horizontal plunger type ) conforming to IS 1703 with brass or gun metal piston, back nut and PVC float conforming to IS:9762, fixing to inlet pipe of water tank and making water proof joints including the cost of jointing materials and CPVC/ G.I specials, if required, testing the joints as per I.S. recommendations all complete as per specification and as directed.

50 mm dia.

Supplying & fixing following size C.P. brass Coupling with approved quality C.P. brass Mosquito proof jalli including providing CPVC/ GI connector, bend and any other CPVC/ GI specials, if required for fixing the coupling, jointing materials such as tefflon tapes, spun yarn, white zinc, fixing the same to GI/CPVC pipes etc. complete as specified & directed for overflow / vent pipe of water tank.

50 mm dia.

Supplying & fixing following Stainless Steel (grade 316) spool pieces of required diameter having flange on one/ both end with flange holes in flanges for fixing with nut & bolts (OR) with screwed ends on both/ one end as per site requirement and as directed by the Engineer in charge, having 450 mm/ required length, providing 3D x 3D (where D is the outer diameter of pipe) and 4 mm thick stainless steel puddle plate (minimum size 150mmx 150mm) welded to it including cutting the plate to required shape and fixing in the reinforcement at the center of RCC wall/ slab at required level, height etc including cutting the form work provided for casting concrete etc., complete all as per specifications and as directed by Engineer-in-Charge. Note:- Actual weight of spool piece only will be measured for payment and no payment will be made for any wastages. Any other SS item required like SS rungs, ss mosquto jali etc will be messured in this item

40 mm to 450 mm dia

Supplying, fabricating and fixing in position structural steel of angle, joists, channel, I Beam, plain / chequered plates for monorail / MS gates / supports / covers of required size including cutting, fabricating, welding, erecting in position including supplying & fixing embedded parts for fixing monorail / supports in concrete, including painting with two coats of approved synthetic enamel paint over a coat of zinc cromate red oxide primer all complete all as per specification and as directed by the Engineer in Charge

Using angle, sloted angles, flats, Joists/ 'I' beam, Channel, fasteners, bolts, chequered plates etc.

Construction of brick masonry valve chambers of following dimensions for depth as mentioned below comprising of 230 mm thick brick masonry in cement mortar 1:4 over a bed of 150 mm thick cement concrete of grade 1:2:4 for foundation with 150 mm offset allround, including racking out joints & plastering in cement mortar 1:3, 20 mm thick both on internal and external surfaces, internal surfaces finished smooth with a floating coat of neat cement, Fixing (FRP/GRP) Frame and cover of approved make all as per specifications and directions of the E.I.C. including dewatering the pit, if required till completion of the work all complete.

Chamber measuring 0.6 mtr. X 0.6 mtr. for an initial depth of 600 mm (Clear internal dimension)

Extra over above item for additional depth of valve chamber beyond initial depth of 0.60 mtr. for Valve Chamber without steps / foot rests / rungs etc. all complete.

Providing GRP/FRP composite Mosquito proof hinged cover with frame for Overhead Water Tank (Having loading capacity not less than 300 Kg) of approved manufacturer having suitable locking arrangement for Manhole opening of water tank, fixing the cover by providing corrosion resistant studs, nuts, built-in hold fasts etc. by chasing or cutting holes and grouting with cement mortar 1:1 by adding approved water proofing compound @ 2% by weight of cement, all complete as per specification and as directed by EIC.

600 mm dia.

TOTAL of Part-II- B : Water Supply System

Part-II-C : Drainage System

Supplying and fixing following size uPVC UV-Stabilised soil / waste quality pipes and fittings ( SWR ) for soil, waste, vent, anti syphonage, HVAC waste pipe and rain water pipe lines consisting following items of work:- i) Providing and fixing uPVC UV-Stabilised Soil/ waste pipe as per IS:13592 and IS:14735 Type-B laid in floor & on Exposed faces of wall of approved make ii) Fixing the pipeline vertically by Metal clamps with rubber seal of approved make iii) Fixing the pipeline Horizontaly with specified slope below the ceiling by Metal clamps with rubber seal and GI hanger rods not less than 5mm dia at specified spacing, including all required hardware. iv) Providing and fixing uPVC cowl at the top of soil, waste water & vent pipe line. v) Providing and fixing uPVC P/S trap on line as per requirement for soil,waste water pipeline. vi) Laying the pipe below floor / ground to the slope and gradient equal to (or) steeper than 1 in 50, making leak proof connections of soil /waste pipe line from the shaft with inspection chamber / Manhole / Gully trap Chamber including the cost of filling around the holes of inspection chamber / Manhole / Gully trap with cement mortar 1:1 mixed with water proofing compound

vii) Jointing the pipe / fittings with Solvent Cement & Rubber ring gasket with making holes in walls / floor grooving and redoing the same and brick support etc. Carrying out water-tightness test for the pipes laid as per codal provisions. Providing Ring Joint pipes at verticals and solvent cement jointed pipes at concealed locations. viii) Cutting the pipe to the required length including providing short pieces, necessary connectors, fittings & specials with & without door, assorted fittings such as plugs, tees, couplers, reducers, cross tees, reducing tees, elbows, bends, single & double Y, vent cowl, gaskets, offsets etc. including providing necessary clean outs, cleaning pipe, extension pipe if any for clean outs, door bend, door elbow, door Y, socket plug, etc wherever required for accessing every segment of soil and waste pipes to enable removal of any Chock up after installation. ix) Providing necessary specials for connecting UPVC SWR (IS:13592/ IS:14735) pipe with UPVC (IS:4985) pipe etc x) Dewatering the pit/ trenches if necessary till completion of work

xi) Testing the pipe line for any leakages, rectifying the leakages if any, retesting etc., till water tightness of the pipe line is ensured. xii) Exposed pipe fixing arrangement include slotted G.I. section and U clamps. Note: Earthwork excavation for trenches shall be paid under relevant items

For Soil & waste, Vent and Rain water pipe lines 75 mm dia.

110 mm dia.

160 mm dia.

Supplying, fixing & concealing on walls/ beams/ floors columns etc. the following sizes uPVC Pipes & Fittings of specified class consisting following items of work:- i) Supplying uPVC pipes conforming to IS:4985 and uPVC moulded plain / threaded fittings conforming to IS:7834 for waste water pipe line of approved make with ISI mark / equivalent approvals as per relevant standards, providing necessary specials for connecting UPVC (IS:4985) pipe with UPVC SWR (IS:13592) pipe etc. ii) Laying and concealing the pipe and specials for waste water by cutting/ making 75 mm X 75 mm groove on the wall, fixing the pipe using metal straps wherever required and filling the groove with cement mortar 1:3 mixed with water proofing compound, after laying and testing the pipe line including making leak proof joints using cement solvent/ Teflon tape ( Forthreaded fittings) of approved make, cutting the pipe to required length, preparation of surface, necessary tools etc. all complete.

iii) Cutting or making hole or chases in RCC or brick work structure such as wall, column, beam, slab, chajja, dado etc. for passing the pipe line and reinstating all the damage to its original condition (No Chases in RCC wall, column, beam, slab, chajja,etc shall be made with out getting the permission from Engineer In charge & structural design Enginner) iv) Concealing the pipes in wall, Laying the pipe below floor/ ground to the slope and gradient equal to (or) steeper than 1 in 50 v) Testing the pipe line for any leakages, rectifying the leakages if any, retesting etc., till water tightness of the pipe line is ensured. For Urinal/ wash basin/ Anti syphonic/ Sink waste. (10kg Pressure)

Providing uPVC Floor Trap/ Nahani Trap of following size having not less than 40mm effective water seal, fixing the trap in position and connecting with waste water pipe by cement solvent/ as per manufacturer's recommandation, embedding the trap in cement concrete 1:2:4 to correct level and gradient, providing and fixing 200 x 200 mm size top tile with central strainer & flat cover/ flush strainer, closing the side inletes with plugs if required etc. complete all as per specification and as directed by the Engineer in charge.

Multifloor trap of 110 x 75 x 50 size of approved make with 3 pc top tile & flush strainer, mat finish.

Providing and fixing HDPE sheet flashing fabricated by welding HDPE flexible sheet with 160 / 110 mm dia HDPE pipe about 400mm long for PVC rain water pipes, fixing the same on RCC/cement concrete surface using approved synthetic glue, covering the HDPE sheet wateright with cement mortar 1:2 mixed with water proofing compound and forming the proper shape and grade and finishing with inlet mouth of rain water pipe, cutting RCC slab or wall if required, including the cost of bitumen, cement mortar etc. complete all as per specification and as directed by the Engineer-in-charge. NOTE: HDPE sheet flashing shall be sticked watertight over RCC / Cement Concrete surface by using approved synthetic glue as per manufacturers recommendation and as directed by the Engineer incharge. After fixing HDPE sheet flashing over RCC/ Cement concrete surface, the top potion of HDPE sheet flashing shall be spread with approved synthetic glue, fine (0.5 mm size) sand shall be sprinkled over it immeadiately, allowed to be dried and after drying it is to be covered watertight with cement mortar1:2 mixed with waterproofing compound @ 2% by weight of cement as per required shape and form.

450 x 450 mm size HDPE sheet Flashing fabricated from 8 mm thick HDPE sheet and PN 6 grade 160mm/ 110 mm dia HDPE pipe.

Providing and fixing Stainless steel Dome mesh fabricated by welding from 2mm dia 304 grade stainless steel wire for PVC rain water pipes (sheet flashings), with 5mm x 10mm L base ring of 0.5mm thickness 304 grade Stainless steel. L ring to be embedded in waterproofing & dome to be placed on it, including the cost of fixing material etc. all complete as specified and as directed by the E.I.C.

Half Spherical Dome having opening 5 to 10 mm of 160 mm ID

Providing, jointing and fixing 'RAINY' online Filters, model as below on roof rain water downtake pipeline at suitable location including fixing the Filter Unit on the wall using suitable anchor bolts, brackets, nuts etc. as per manufacturer's requirement, testing etc. all complete. The cost shall include all accessories, specials etc. to commission the Filter. Item also includes Providing and Fixing 110mm dia uPVC Ball valve (white, off-white or grey colour, agri class) of Approved make suitable for pipe pressure class of approved make with material and labour, making water proof joints, including cost of jointing material and uPVC specials if required & testing the joints. etc. complete as per directions of engineer-in-charge.

Rainy FL-300 with 110mm PN10 uPVC ball valve & reducer

TOTAL Part-II-C : Drainage System

Part-II-D: External Water Supply System

Supplying and laying below the ground or floor, the following diameter uv-stabilized Chlorinated Poly Vinyl Chloride (C-PVC) pipe line of specified class, consisting the following items of work:- i) Supplying CPVC pipes and all required CPVC plain / brass threaded fittings, SDR - 11 having thermal stability for hot & cold water supply of approved make conforming to IS 15778 with ISI mark for CPVC pipe having nominal size up to 50 mm and conforming to ASTM F 441 (IPS SERIES) Schedule 40 for CPVC pipe having nominal size 65 mm (2 ½”) and above. ii) Laying and fixing the pipe and specials below the ground or floor to correct line, level and plumb for water supply line. iii) Making leak proof threaded/welded joints. including cutting the pipe, cleaning, marking, jointing, etc. and including the cost of jointing materials. iv) Cutting or making hole or chases in RCC or brick work structure such as wall, column, beam, slab, chajja, dado etc. for passing the pipe line and reinstating all the damage to its original condition. v) Providing and fixing C-PVC weldable / threaded fittings such as Union, Nipples, Bends, Elbows, Tees, Reducers, End caps, Couplers, Adaptors, Saddles, Plugs, Tank connectors, Expansion loops, Bypass bends, etc

vi) CPVC pipes and fittings shall be of same brand. vii) Testing the pipe line as per relevant code to a hydraulic pressure of 10 Kg/Sq.cm to assess leakages if any, rectifying the defect, retesting etc till water tightness of pipe line is ensured NOTE:- 1) The rate shall also include for cPVC pipe & specials required for making connections with the existing GI / CPVC pipe line laid by other agency. 2) All threaded joints shall be made with brass threaded fittings Only. 3) Excavation and refilling shall be paid under relavent item 4) All C-PVC pipes in trenches provided for PH work will be measured under this item

50 mm (2") n.size

Making cross connection of following size on existing Cast iron / Ductile Iron / MS / HDPE / UPVC water supply pipe line irrespective of branch size by cutting the existing pipe line with mechanical or power cutter, chamfering the edges, providing & fixing Specials such as Tees, bends, Saddle pieces, collar, distance pieces, flanges etc., dewatering, providing PCC of grade M-15 supports to the joint, making lead/push on/ mechanical/flanged joints as the case may be including isolation delay, tools & machineries, excavation, working on the live water supply line with in the restricted timings etc. all complete as directed by EIC.

100 mm dia to 150mm dia

Up to depth 1.5 M from ground level

Depth 1.5 to 3.0 M. from ground level

Up to depth 1.5 M from ground level

Depth 1.5 to 3.0 M. from ground level

Up to depth 1.5 M from ground level

Depth 1.5 to 3.0 M. from ground level

Disposing off the surplus excavated materials by mechanical transport to the lead upto 2.0 KM. over and above initial lead of 50 M including loading, unloading, spreading, levelling etc. complete all as per specifications and as directed by the Engineer in charge.

Ordinary soil

Hard rock / soft rock, NOTE :- The rate in respect of item No.236 is applicable for the net quantities arrived at after making deductions for voids about 20% for ordinary soil and 50% for hard and soft rock from the corresponding stack / truck measurements, in case direct measurement is not possible. All exavation in trances for PH work will be paid under Items 233 to 235

TOTAL OF Part II-D : EXTERNAL WATER SUPPLY SYSTEM

Part-II- E : External Drainage System

Constructing brick masonry Gully Trap chamber of following size and upto 600 mm initial depth including providing and fixing gully trap, consisting following items of work:- i) Providing square mouth uPVC gully trap of size 150 X 150 mm squre or 150mm dia with 110 mm outlet of Approved Make embedding in position in cement concrete 1:2:4 inside the chamber. ii) 230 mm thick brick masonry in 1:4 cement mortar over 150 mm thick cement concrete 1:2:4. iii) 15 mm thick plaster in cement mortar 1:3 on internal and external surfaces, internal surfaces and top finished with a floating coat of neat cement. iv) Providing and fixing precast approved make Composite (FRP/GRP) / DI Manhole covers & frame of size 300mm x 300mm as approved by E.I.C having point loading capacity not less than 0.3 tonne with name of department and year engraved as specified / approved, including cost of necessary hardware and cement concrete / mortar for fixing the frame.

300 X 300 mm size Gully Trap chamber.

Providing & laying UPVC under ground drainage pipes & Fittings of Approved make for storm water drains & Sewer lines of following size conforming to IS:15328 to proper level & grade, jointing including prviding coupler with solvent cement / welded joints / as per manufacturer's requirement, encasing the pipe alround using cement concrete 1:3:6 complete if required all as per specifictions, drawing and as directed by the E.I.C. item includes Providing and fixing UPVC fittings such as Bendes, Tees & Y, Reducers, Blanking Plugs, Couplers, Adaptors etc For Sewer line and Storm water Drains

110 mm DN (SN 8kN/m²-SDR34)

160 mm DN (SN 8kN/m²-SDR34)

200 mm DN (SN 8kN/m²-SDR34)

250 mm DN (SN 8kN/m²-SDR34) NOTE:- Cement concrete for encasing shall be paid under relevant item

Cement concrete of specified grades at all locations & depths for the following works using graded stone aggregate of 20mm. maximum size including necessary form work, machine mixing, transporting, placing in position consolidation, finishing, curing etc. complete as per specifications, drawings & as directed by the EIC.

PCC 1:3:6 in bed concrete, pedestal, encasing etc.

PCC 1:2:4 in bed concrete, pedestal, encasing etc.

Constructing brick masonry Inspection chambers of internal sizes 900 X 600mm at bottom and 900 X 450mm at top for an initial depth of 600mm consisting following items of work. i) 230 mm thick brick masonry in cement mortar 1:2 over 150 mm thick bed in cement concrete of grade 1:2:4 with 150 mm offset all-around, tapering of longitudinal walls starting from the height of 450 mm from the top of chamber frame & cover and tapering of longitudinal walls ending at the height of 200 mm from the top of frame & Cover to obtain an internal dimensionof 900 X 450mm at 200 mm from top of chamber. ii) 20 mm thick plaster in cement mortar 1:1 mixed with water proofing compound @ 2% by weight of cement on internal and external surfaces, internal surfaces and top finished with a floating coat of neat cement. iii) Making benching and haunching in cement concrete of grade 1:2:4 and finishing with floating coat of neat cement. iv) Fixing frame and cover at top using cement concrete of grade 1:2:4 (for bed block / bearing course and capping) and cast iron steps / foot rests, all as per specification and as directed by Engineer in charge. Please refer Additional Notes

Inspection chamber of internal sizes 900 X 600 mm at bottom and 900 X 450 mm at top for an initial depth of 600 mm.

Extra over above item for additional depth of inspection chamber beyond 600 mm initial depth & upto a depth of 1800 mm. all as per specification and as directed.

Providing & fixing precast approved brand FRP/GRP Composite Manhole covers as approved by Competant athority / E.I.C tested as per IS:1726, including cost of necessary hardware, 1:2:4 grade concrete for fixing frame, bed block (bearing course) and capping including necessary form work and CM 1:2 mortar for fixing the frame & for plastering exposed surfaces of concrete bed block (bearing course) and capping finished smooth with floating coat of neat cement etc., complete as per specifications, drawings and as directed by the E.I.C.

Rectangular Heavy duty (Grade EHD - 35 designation as per IS:1726/ D-400 as per EN124 or higher loading class) frame and cover size 900 x 450mm

Rectangular Heavy duty (Grade EHD - 35 designation as per IS:1726/ D-400 as per EN124 or higher loading class) frame and cover size 900 x 600mm

Circular Heavy duty (Grade EHD - 35 designation as per IS:1726/ D-400 as per EN124 or higher loading class) frame and cover clear internal dia. 600mm

Square Heavy duty (Grade EHD - 35 designation as per IS:1726/ D-400 as per EN124 or higher loading class) frame and cover size 600 x 600mm for Valve Chamers

Rectangular Heavy duty (Grade EHD - 35 designation as per IS:1726/ D-400 as per EN124 or higher loading class) frame and cover size 1200 x 600mm for Valve Chamers Note: Shade and Colour and design pattern to be get approved from Engineer-in-Charge.

Making drop connection for initial depth differance between incoming and outgoing sewer line upto 600mm including making ramp, U-channel of height and width not less than branch pipe dia in CC 1:2:4, plastering 20mm thick in CM 1:3, finished smooth with a floating coat of net cement. and for drop connection having depth differance between incoming and outgoing sewer line more than 600mm including providing and laying following dia. uPVC pipe conforming to IS:15328 & specials, providing and fixing bends, tees, crosses, plugs, caps etc., jointing the pipes/fittings using sealant of approved manufacturer, encasing the pipes with CC 1:3:6 such that shape of the cross section through encased pipe shall be square and sides equal to outer diameter of pipe plus 300mm, including form work, curing etc., all as shown in the drawing, as mentioned in the specifications and as directed by EIC..

a) for initial depth difference of 600mm

b) for depth difference more than 600mm 160 mm DN to 250 mm DN (SN 8kN/m²-SDR34) NOTE:- 1) The depth of drop connection shall be measured vertically from the bed level of drop pipe cleaning chamber to the invert of manhole or chamber. 2) CC and form work for encasing will be measured and paid under relevant item. 3) uPVC pipe and fittings, specials will be measured and paid under relevant item.

Construction of brick masonry drop pipe cleaning chamber of internal size 300 x 300 / 450 x 450 mm for depth of 450 mm from top of cover & frame above uPVC drop pipe in brick masonry, in cement mortar 1:2 and 230 mm thick wall over 150 mm offset from all outer finished wall surfaces of the chamber, providing & fixing suitable medium / heavy duty pre-cast FRP cover of approved make, CC 1:2:4 coping at top of brick work, 20 mm cement plastering in cement mortar 1:1, mixed with water proofing compound @ 2% by weight of cement in internal & external surfaces of the chamber, all inside surfaces finishing smooth with floating coat of neat cement and external surfaces finishing rough with wooden float, including dewatering if necessary till completion of the work, all as directed by the E.I.C.

300 x 300 mm chamber with HD-20 FRP composite cover and frame for pipes upto 250 mm pipe

Providing copolymer polypropylene steel reinforced plastic Foot-rests / Steps of Patel brand or eq. as per ASTM D - 4101 specification and moulded a 12 mm dia. IS - 1786 grade Fe - 415 steel reinforcing bar and in "U" shape having dimensions 263 x 168 mm and fixing in concrete / wall as shown in the drawing and as directed all complete.

Making connection with the existing inspection / chamber manhole including breaking the brick masonry wall, finishing with cement mortar/cement concrete after making the connection all complete.

160 / 200 / 230 / 250 mm dia.

TOTAL OF Part-II-E : Drainage System

PART-II-F : RWH Works

Boring/Drilling bore well of required dia.for casing / strainer pipe by suitable method prescribed in IS: 2800 (Part-1), including collecting soil samples from different strata, preparing & submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machinaries required for the job, all complete as per the direction of Engineer- in- Charge, Upto 30 mtr. depth below ground level.

All types of soil, 300 mm dia

Rocky strata including boulders, 300 mm dia

Providing, fixing, laying, jointing & testing below the ground / above ground UPVC socketed pipes for solvent cement joint / plain ended CLASS 5 pipes as per IS:4985 including suitable heavy fittings like elbows, collars, tees, unions, couplings, reducers, bends, enlargers, saddles flanged tailpieces and all other fittings required for the completion of laying and jointing as per IS 7634, testing pipelines with fittings for 10 kg/cm2 hydrostatic pressure for minimum duration of two hours with clean water and rectifying the leaks if found, cutting the pipes to the size, threading as required, jointing of pipes and fittings to be carried out using Hold-ties, Teflon tape, PVC clamps, wooden gutties, SS screws, cement, solvent cement etc. required for the completion of the work and all as per specifications, drawings and direction of the Engineer-in-charge.

normal 110 mm dia class 5 perforated pipe

Gravel packing in tube well construction ( Around casing pipe ) in accordance with IS:4097, including providing gravel fine/medium/course, in required grading & sizes as per actual requirement, all complete as per direction of EIC.

Providing & fixing in position following size Weep holes wherever required in RCC / Masonry walls including cutting to required shape & size all as per specifications, drawings & as directed by the E.I.C all complete.

PVC pipe of 75 mm OD (IS:4985-6Kg class)

Providing and fixing recharge well screen (two cylindrical V-wire screens fitted concentric to each other. Annular spaces filled with graded gravel) assembly of M/s Appollo screens or equivalent aproved manufacturers, including hardware and labourer as per drawing and specified by E I C.

size of screen 8-16 1.00 m length(material SS 304)

Supplying, fabricating and fixing in position structural steel of angle, joists, channel, I Beam, plain / chequered plates for monorail / MS gates / supports of required size including cutting, fabricating, welding, erecting in position including supplying & fixing embedded parts for fixing monorail / supports in concrete, including painting with two coats of approved synthetic enamel paint over a coat of zinc cromate red oxide primer all complete all as per specification and as directed by the Engineer in Charge

Structural steel using MS flats, Angles. Rods etc etc.

TOTAL OF PART-II-F : RWH Works

Description of Work / Item(s)

Amount

ABSTRACT FOR PART III : ELECTRICL WORKS

Section I : LT Panels

Section II : LT Cables

Section III : Readymade DB

Section IV : Point Wiring & Submain wiring

Section V : Light Fixtures, Ceiling Fans, Exhaust Fans etc.

Section VI : Telephone system

Section VII : Earthing System

Section VIII : LAN System

Section IX : Fire Alarm System

Section X : PA System

Section XI : Miscellaneous Items

Description of Work / Item(s)

Amount

PART III : ELECTRICL WORKS

Section-I: LT Panel: Design, manufacture,supply, installation,testing & commissioning of floor mounting front operated front access extensible type cubicle panel totally enclosed with IP-42 protection with hinged and lockabale doors. Switchboards fabricated from 2 mm thick CRCA sheets including interconnections,tinned copper strip /Wire crimping lugs, bonding to earth suitable for use at 415 V, 3 phase 4 wire 50 Hz system, and to withstand a fault level of 25kA for 1sec or as specified, symmetrical at 415 V complete as per specifications, as required & as below. All switchboards shall have provision for entry of cables from the top/bottom as required. All live accessible parts shall be shrouded and all equipment shall be finger touch proof. The bus bars shall be insulated with heat shrinkable sleeves & color coaded .SMC/DMC shrouds and busbar supports shall be used. Please refer notes for further specifications. Please refer Additional Notes.

Supply, installation, testing & commissioning of 63 A FP 300mA RCBO in a readymade powder coated MS CRCA wall mounted enclosure with MS cover and with necessary cutouts, interconnections earthing stud etc.

Supply, installation, testing & commissioning of 40 A DP 30mA RCBO in a readymade powder coated MS CRCA wall mounted enclosure with MS cover and with necessary cutouts, interconnections earthing stud etc.

TOTAL OF LT PANEL WORKS CARRIED OVER TO ABSTRACT

Section - II: LT Cables L.T Cables: Supply, installation, testing & commissioning of 1.1 kVgrade stranded circular/ sector shape core conductor with XLPEinsulation, external/ tapped/ extruded PVC inner sheathed, G.I flatstrip/wire armoured, extruded FRLS grade antirodent & anti termitePVC (ST-2) outer sheathed cable conforming to IS 7098 Part-I withlatest amendments, fixed on wall/column/ slab/false ceiling or inexisting hume pipe/trench/ shaft/pit/ on 5mm thick M.S. flat /GIspacer/angle/ support fixed with coach screws/grouted in wall/anchorfasteners 2mm. thick G.I. fabricated saddle, all fixing accessories, etccomplete including painting of M.S spacers/angles and saddles or inground at a - depth of 900 mm below ground level , includingexcavation in all type of soil/concrete, road cutting/footpath cutting,sand bedding, laying of baked bricks on side & top-, temporaryreinstatement, back filling, dewatering, consolidation, disposal ofexcess earth within the radius of 500 m and making good to theoriginal finish etc providing brass cable number tag as per encloseddetailed specifications, drawings & as per instructions of the E-I-C &of the following sizes. Please refer Additional Notes.

3.5C x 185 sq.mm Al conductor cable

3.5C x 150 sq.mm Al conductor cable

3.5C x 70 sq.mm Al conductor cable

3.5C x 25 sq.mm Al conductor cable

4C x 16 sq.mm Al conductor cable

4C x 10 sq.mm Al conductor cable

4C x 6 sq.mm Al conductor cable

3C x 10 sq.mm Al conductor cable

LT Cables End Joints End jointing of following sizes of cable by crimping with supply of all jointing materials like solderless tinned copper cable socket, double compression brass cable glands, gland earthing, insulation tape, flux, duplicate interconnection between gland earthing strip & to the nearest earthing bus terminals as per the drawings, specifications and as per the instructions of the Engineer-in-charge.

3.5C x 185 sq.mm Al conductor cable

3.5C x 150 sq.mm Al conductor cable

3.5C x 70 sq.mm Al conductor cable

3.5C x 25 sq.mm Al conductor cable

4C x 16 sq.mm Al conductor cable

4C x 10 sq.mm Al conductor cable

4C x 6 sq.mm Al conductor cable

3C x 10 sq.mm Al conductor cable

Flexible Cables: Supply, installation, testing & commissioning of 1.1 KV ,XLPE insulation, PVC inner sheathed, G.I armoured, extruded FRLS PVC outer sheathed, multi stranded Aluminium conductor cable conforming to IS 7098 Part-I with latest amendments, on wall/column/slab/RCC trench/ shaft on existing GI flat/angle support, all fixing accessories etc., in Hume pipe, in ground at a depth of 900 mm below ground level (excluding excavation) including sand bedding, laying of baked bricks on side & top, reinstatement, back filling, dewatering, consolidation etc. as per instructions of the E-I-C.

Supply, installation, testing & commissioning of 1.1 KV grade 3 C x 2.5 sq. mm Multi Stranded Copper Flexible cable PVC insulated, Extruded FRLS PVC Type ST-3 outer sheath in existing Hume pipe/G.I. Pipe/HDPE pipe/trench /shaft/pit.

Supply, installation, testing & commissioning of 1.1 KV grade 3 C x 1.5 sq. mm Multi Stranded Copper Flexible cable PVC insulated, Extruded FRLS PVC Type ST-3 outer sheath in existing Hume pipe/G.I. Pipe/HDPE pipe/trench /shaft/pit.

Supply, installation, testing & commissioning of 1.1 KV grade 3 C x 1.0 sq. mm Multi Stranded Copper Flexible cable PVC insulated, Extruded FRLS PVC Type ST-3 outer sheath in existing Hume pipe/G.I.Pipe/HDPE pipe/trench /shaft/pit.

TOTAL OF LT CABLE WORKS CARRIED OVER TO ABSTRACT

Section - III : Readymade Distribution Boards (DB) READYMADE DISTRIBUTION BOARDS: Supply, installation, testing & commissioning of following readymadedistribution boards, double door, IP 42 degree protection completewith necessary, MCB isolators , MCBs, earth leakage circuit breaker(ELCB) etc including interconnections with appropriate capacity sizeof PVC insulated copper conductor wires (ISI marked), suitable forconcealed mounting /wall mounting with MS frame work of 40 x 40 x5 mm MS angle iron, with M.S. enclosure fabricated out of min 18SWG /20SWG thick M.S. CRCA sheet as per manufacturersstandard, with concealed hinged door, locking arrangement etc.including earthing clamps for both incoming & outgoing circuits,interconnections, per phase isolation kit as required,cable end box &wire way box if required, continuous copper earth wire in the wire waybox with single/duplicate brass earthing terminals, danger board, nameplate, flexible earthing for the door, metal treatment & powder coatedpainting, Phase Distribution drawing etc. all as per drawings (G.A. &fabrication drawing to be got approved), etc. relevant IS & instructionof Engineer-in-charge. Please refer Additional Notes.

EMDB- Kitchen (8 way VTPN DB ) : a) 125 A FP MCB type Isolator -- 1 No. b) 40A/63A TP MCB -- 8 nos c) 4 way brass neutral link -- 8 Sets.

MDB- 1 (8 way VTPN DB ) : a) 160 A FP MCB type Isolator -- 1 No. b) 40A/63A TP MCB -- 8 nos c) 4 way brass neutral link -- 8 Sets.

MDB- 2,3 (8 way VTPN DB ) : a) 250 A FP MCB type Isolator -- 1 No. b) 40A/63A/125A TP MCB -- 8 nos c) 4 way brass neutral link -- 8 Sets.

LDB-G1, LDB-G2, LDB-G3, LDB-1.1, DB-1, ELDB-1, ELDB-2, ELDB- 3, ELDB 1.1 a) 40 A FP MCB - 1 No. b) 40 A, DP ELCB with 30mA sensitivity- 3Nos. c) 6 A -32 A SP MCB -- 12 nos d) 8 way brass neutral link -- 4 Sets.

PDB-G1, PDB-G2, PDB-G3, EDB, EPDB-1, PDB1.1 a) 63 A FP MCB - 1 No. b) 6 A -32 A SP MCB -- 18 nos c) 63 A, 2 pole ELCB with 30mA sensitivity- 3Nos. d) 8 way brass neutral link -- 4 Sets.

ACDB-1 & ACDB-2 a) 100 A FP MCB - 1 No. b) 6 A -32 A SP MCB -- 18 nos c) 100 A, 2 pole ELCB with 30mA sensitivity- 3Nos. d) 8 way brass neutral link -- 4 Sets. Note: LSIG protection in incomer is envisaged.

SPN DBs (For Shops) a) 40 A FP RCBO -- 1 No. b) 6A/10A/16A SP MCB -- 6 nos c) 8 way brass neutral link -- 2 Sets.

Flexi-DB with acrylic door : a) 40 A FP MCB type Isolator -- 1 No. b) 40A, 4 NO Power contactor -- 1 no c) Auxiliary changeover switch for 40A contactor--1 No. d) Digital time switch with one channel - 1 No. e) 25A FP MCB (D-Curve) -- 3 nos. f) 8 way brass neutral link -- 4 sets

AV Panel

TOTAL OF READYMADE DB WORKS CARRIED OVER TO ABSTRACT

Section - IV : Point wiring & Submain wiring Point wiring in PVC conduit (HMS variety): Point wiring for light/ceiing fan/6A/ 16A/ socket outlet /6A outlet for exhaust fan, bell pointetc. with 1.1 KV grade FRLS PVC insulated multistranded copperconductor wire(ISI marked), in 25 to 40 mm dia High mechanicalstress (HMS) rigid PVC conduit having ISI marked IS 9537 Part - 3,including fixing accessories & hardware concealed/ exposed inslab/wall or on 5mm. thick G.I. spacers fixed with no. 10 nettle foldwood screws with nylon plug complete with all conduit accessories 20SWG G.I. Saddles, ready made MS switchboxes & socket outletboxes of min 18 SWG / 20 SWG thickness , brass earthing stud 1/2nos, controlling modular switches, sockets with moulded front plateand inner plate etc. including appropriate size of FRLS PVC insulatedcopper earth wire, brass/bakelite (straight / angular) lamp holders, 3plate ceiling rose,16 A, connectors, painting etc. as per specificationsand drawings and as per instructions of E-I-C and as detailed below:(sample switch Box etc. to be got approved before fabrication) Please refer Addtional Notes.

Primary Light point with 2 nos. of 1.5 sq.mm wires alongwith 1 no of 2.5 sq.mm insulated earth wires & 6A switch

On normal power supply

On DG power supply

Secondary light point with 2 nos. of 1.5 sq.mm wires alongwith 1 no of 2.5 sq.mm insulated earth wire looped to item No. 1.1 above

On normal power supply

On DG power supply

Primary Light point with 2 nos. 1.5 sq.mm wires & 1No. 2.5 sqmm earth wire with 'Two way' 6A switch (Staircase lights) (On DG power supply)

Secondary light point with 2 nos of 1.5 sq.mm wiresalongwith 1 no of 2.5 sq.mm insulated earth wire looped to above item (Staircase lights) (On DG power supply)

16 A 6 pin socket outlet point with 2.5 sq.mm wires alongwith 1 no of 2.5 sq.mm insulated earth wire complete with 16 A switch in one box

On normal power supply

On DG power supply

1no. 6A & 1 no. 16 A 6 pin socket outlet point with 2.5 sq.mm wires alongwith 1 no of 2.5 sq.mm insulated earth wire complete with 6A & 16 A independent switches in one box on normal power supply.

6 A 6 pin socket outlet point with 1.5 sq.mm wires along with 1 no of 2.5 sq.mm insulated earth wire complete with 16 A switch in one box

On normal power supply

6A/10A/ 13A multistandard socket with 1 no. of 1.5 sq.mm wires alongwith 1 no of 2.5 sq.mm insulated earth wires on ceiling and directly controlled from DB (Flykill in dining areas & for AC cassette units) (On nomal power supply)

3 nos.6A/10A/13A multistandard socket points with 2 nos of 2.5 sq.mm wires alongwith 1 no of 2.5 sq.mm insulated earth wires, looping with 1.5 sqmm ,+ 2.5sqmm wires (for earth) & independent 10A switches. (On nomal power supply)

Point wiring for single phase exhaust fan with 1.5 sq.mm phase wires & 2.5 sqmm earth wire & with ceiling rose near exhaust fan & controlling 6 A , 240 V SP switch on nearest switchboard.

225 mm exhaust fan

305 mm exhaust fan

Ceiling fan points with 1.5 sq.mm wires and with2.5 sq.mm insulated earth wire complete with 6A,240V, SP switches & 5 stepped capacitor type regulator.(On nomal power supply)

Primary Light point with 2 nos of 1.5 sq.mm wires alongwith 1 no of 2.5 sq.mm insulated earth wires & directly controlled from DB (For emergency lights on battery backup)

Water heater point with 4 sq.mm + 2.5 sq.mm insulated earth wires, 32 A DP MCB type isolator (non tripping type) in MS box near door at suitable position , 30A 3 way connector block mounted in MS box near heater.

Point wiring with 4 sq.mm wire and 2.5 sq.mm insulated earth wire complete with 25 A, 3pin socket outlet with plug (Industrial Type) & 25A DP MCB at operating height on wall, in readymade powder coated MS CRCA box with MS cover and with necessary cutouts, interconnections earthing stud etc . MCB shall be with 10 kA breaking capacity.

On normal power supply (in dining area + Stage area)

On DG power supply (in kitchen)

Point wiring with 6 sq.mm wire and 4 sq.mm insulated earth wire complete with 32 A 5pin socket outlet with plug (Industrial Type) & 32A TP MCB (D type) at operating height on wall, in readymade powder coated MS CRCA box with MS cover and with necessary cutouts, interconnections earthing stud etc MCB shall be with 10 kA breaking capacity [ On DG power supply (in kitchen)]

Primary point with 2 nos. 2.5 sq.mm wires along with 1no. 2.5 sqmm earth wire with one no. bulkhead luminaire along with 1 no. 6A SP switch and 6/16 A 6 pin socket outlet point with 2.5 sq.mm wires alongwith 1 no. of 2.5 sq.mm insulated earth wire complete with 16 A controlling switch all in one box in lift shaft (On DG power supply)

Secondary point with 2 nos. 2.5 sq.mm wires & 1no. 2.5 sqmm earth wire looped to primary point as per item no. 4.16

TOTAL OF POINT WIRING WORKS CARRIED OVER TO ABSTRACT

Section - V : Light Fixtures, Ceiling Fans etc. Light Fixtures & Fittings: Supply, installation, testing & commissioning of fixtures & fittings,ceiling fans, exhaust fans, etc complete with accessories, tube/ lamp etc in on surface of slab/beam by 2 nos (minimum) of 6 mm anchor fasteners or on wall with 2 nos of wood screws, nylon plug etc., suitable supporting frame fixed with rag bolts grouted on the wall/anchor fastener on the beam/on the column & other fixing accessories etc. provision & connection with 1.5 sq.mm multistranded copper conductor FRLS PVC wires etc., all as per drawing, specifications & as per the instruction of E.I.C. Notes: 1) Sample fixture/fittings shall be got approved from Dept. withcomplete technical data. 2) The Cat No. indicated below is only indicative. 3) All fixtures shall be with low loss electronic ballast/ drivers. 4) Cost of mounting accessories shall be included in Fixture cost.

20 W Surface mounted LED luminaire similar to M/s Philips make cat no. BN308 C LED 20S-6500 PSU WH 2000 Lumen output or eq. approved.

38 W Surface mounted IP 65 LED luminaire similar to M/s Philips make cat no."Essential Smart Bright" WT 150 C LED 40 6500 PSU L 120 or eq. approved.

Recessed mounted 600x600mm luminaire having 3500 - 4000 lumen output similar to M/s Philips make Cat no. "Full Glow G6'' RC380 B' LED 25S 6500 PSU G6 OD or eq. approved

LED surface mounted bulkhead fitting with 600 lumen nominal output similar to M/s Philips cat no. WT202W LED6S CW PSU S2 PC Endura LED or eq. approved.

15 W recessed mounted downlighter similar to M/s HYBEC make Cat no. HLR-2668 or eq. approved.

Chandelier-1 (bigger)

Chandelier-2 (Smaller)

Profile Light

Decorative Wall Light

12W Surface mounted LED downlighter similar to M/s HYBEC make Cat no. 'HLS 3014' or eq approved

Surface mounted 7W LED downlighter similar to M/s HYBEC make Cat no. 'HLS 3018' or eq approved

50 W recessed mounted downlighter similar to M/s HYBEC make Cat no. HLR-2663 or eq. approved.

10 W recessed mounted IP 65 step light similar to M/s HYBEC make Cat no. HLO 5555 or eq approved

3 W recessed mounted IP 65 step light similar to M/s HYBEC make Cat no. HLO 6051 or eq approved

150W Flood light similar to M/s Havells Jeta FLS150

Surface mounted 15W LED downlighter similar to M/s HYBEC make Cat no. 'HLO 5312' or eq approved

Surface mounted 5W LED downlighter (Hanging Light) similar to M/s HYBEC make Cat no. 'HLA 3804' or eq approved

Surface mounted 27W LED downlighter (Square shaped Hanging Light) similar to M/s HYBEC make Cat no. 'HLA 3881' or eq approved

20 W Surface mounted LED luminaire similar to M/s Philips make cat no. Smart Bright Surface or eq. approved.

12W spike light similar to M/s HYBEC make Cat no 'HLO 5922' or eq. approved

18 W IP 65 Bollard 2200 mm height similar to M/s HYBEC cat no. HLO-5083 or eq. approved.

12 W IP 65 LED Linear Wall Washer similar to M/s HYBEC cat no. HLO 7013 or eq. approved.

3W 99 Lumen LED Arch Light similar to M/s HYBEC make Cat no. HLO-5412 or eq approved

12 W IP 65 LED Linear Wall Washer similar to M/s HYBEC cat no. HLO 5450 or eq. approved.

LED Cove lighting : Supply, installation, testing & commissioning of indoor LED cove lightingwith mounting track & following control modules complete with loopingwiring from fixture to fixture with readymade jumper cables & leadercable and interface module looping with Cat-6 wires all in PVC HMSconduit of 25-32 mm size etc. complete as required and as perinstructions of E-I-C

LED cove lighting strip, 240V AC, 2700 K colour temperature, wide beam angle similar to M/s Philips Vaya free form IP40 2700K or equivalent approved.

DALI broadcast controller similar to DDBC 1200 of M/s Dynalite or equivalent approved.

DALI broadcast Relay controller similar to DDRC 1220FR - GL of M/s Dynalite or equivalent approved.

User interface device similar to DLPE9100 of M/s Dynalite or equivalent approved

Emergency Luminaire :Supply, installation, testing & commissioning of self contained emergency LED luminiaire with min.1 hour backup with suitable mounting arrangement etc and egress symbols as per instructions of EIC.

Ground Embedded Luminaire to highlight the Pillars/Coloumns similar to Hybec model no. HLO 6818 or eq. approved.

Exhaust fans:

Supply,installation,testing & commissioning of 380mm dia 900 rpmexhaust fans , single phase complete with blades, motor. Scopeincludes supply of 3C copper 1.5 sq.mm. flexible chord of suitablelength with 6/16A 6 pin plug top, aluminium louvers shutters, rag bolt/Anchor fasterner,if required, 4 corners covered with 2 mm thick MSsheet to form suitable circular opening with necessary fixingarrangement suitable MS angle iron frame made of 30 x 30 x 5 mm,painting as per specification, drawing as directed by E.I.C. Note: The scope includes supply of GI angle cost with bird screen asper instructions of E-I-C.

Supply,installation,testing & commissioning of 225mm dia exhaustfans, single phase complete with blades, motor. Scope includessupply of 3C copper 1.5 sq.mm. flexible chord of suitable length with6 A 3 pin plug top, aluminium louvers shutters, rag bolt/ Anchorfasterner, if required, 4 corners covered with 2 mm thick MS sheet toform suitable circular opening with necessary fixing arrangementpainting as per specification, drawing as directed by E.I.C. Note: The scope includes supply of GI angle cost with bird screen asper instructions of E-I-C.

Ceilig fans: Supply, installation, testing & commissioning of 1200mmdouble ball bearing ceiling fan of following sizes complete withshackle, motor, canopy, fan blade, safety wire, 300mm down rodincluding continuous earthing and final connectrion with 24/0.2mm diacopper 2/3 core twisted FRLS insulated PVC flexible wires and all asper specifications, standards, drawings & instructions of E-I-C.

Fan Hook Boxes: Supply, installation, testing of concealed fan hook boxes of size 150 x 150 x 75 mm deep fabricated outof 2mm thick M.S CRCA sheet with nominal 12 mmdia M.S tested rod hook with brass earthing stud & welded nut from inside and 2mm thick round M.Scover plate overlapping by 15 mm, including redoxide and two coats of white synthetic enamel paints and brass chromium plated screws and cupwashers for fixing and all as per conceptional drawing No.: CED/EM /STD/11 R4 & instruction of Engineer-in-charge (Sample box with cover to be got approved before fabrication including the fabricator)

Water Heaters: Supply, installation, testing & commissioning of pressure type 25 litre capacity storage type (Horizontal mounting) water heater to work on 230V AC supply with 2000 W heating element complete with all accessories, ISI mark, BEE min 4star rated with MS polymer/glass rust proof coating inner container and ABS plastic outer body, PUF insulation between inner & outer container, thermostat , thermal cut out, pressure release valve,3 Cx 2.5 sq.mm PVC insulated stranded copperchord for interconnection between water heater to junction box, connector, flexible pipe of suitable size for inlet and outlet water connection etc .Scope includes M.S supports fabricated out of 25mm x 5 mm thick M flat supports fabricated out of 25 mm x 5 mm thick M flat fixed on wall with 4 nos.of No. 10 nettle fold screws in wall with nylon/phil plug & all mounting accessories including connection with suitable lugs, all as per specificaiton and instruction of E-I-C. Note: Samplewater heater to be submitted for approval.

Fly Kill :Supply, installation, testing & commissioning of UV Fly Catcher Machine (Flying Insect Killer Machine) of 20W Power Consumption, duly suspended from the ceiling with electro-zinc coated TF rods, ceiling mounting brackets etc.

Area Light Luminaire Supply, installation, testing & commissioning of flood light luminaireas area light luminaire mounted on 0.9m. Bracket fixed on wall havingminimum efficacy of 110 lumen/Watt and a minimum output of 3500lumens with 4000 0 K to 5700 0 k CCT & pressure die cast Aluminiumhousing, UV stabilized polycarbonate/ toughned glass diffuser havingIP 66 & IK 07 protection etc. and as per specifications.

Non powered Signages: Supply, installation, testing & commissioning of Non powered signages similar to M/s Prolite make AUTO GLOW as per instructions of E-I-C.

Design, Supply, installation, testing and commissioning of HighVolume Low Velocity (HVLS) fans of 24 Feet diameter. The fansshall have minimum three blades and blade shall be made up ofaluminium. The fan motor shall be suitable for 415V, 3 Phase, 50 HzAC supply. The motor rating shall be 2HP. The fan shall have VFDcontroller. The Rate shall be inclusive of Electrical panel, requiredlength of power cable, Zone controller for controlling four fans withtouchscreen technology, control box, communication cable (CAD5 orCAD6), etc. The control shall have minimum features of fan speedcontrol, scheduling, fan status, BMS integration, etc. The rate shallbe inclusive for steel supporting arrangements for the fan.Section-I: LT Panel:

TOTAL OF LIGHT FIXTURES, CEILING FANS, ETC. WORKS CARRIED OVER TO ABSTRACT

Section - VI : Telephone System

Telephone Point Wiring: Point wiring with 4 pair CAT-6 wirescopper conductor PVC insulated, in 25-40 mm dia rigid PVC conduit(HMS variety - ISI marked,conforming to IS 9537 Part-III) concealedin slab /wall or surface with 5mm thick G.I.spacer & 20 SWG GISaddle fixed with nylon plug, wood screws etc. complete with allconduit accessories suitable MS pull boxes of suitable sizes as per sitecondition wherever required M.S. telephone point accessories boxesfabricated out of min 18 SWG/20 SWG thick CRCA sheet zincpassivated brass earthing studs 1/ 2 nos., RJ-11 telephone socketoutlets with shutter ferrule numbers on both side of the circuits allterminations with ferrule /lugs if required, labelling all as per drawingspecifications & as per instructions of E-I-C. Notes: 1.Point wiring means 4 pair CAT-6 wires from Telephone Tag Block toassigned point including end termination of one pair at both sides andother pairs should be kept spare. 2. G.A drawings & fabrications drawing are to be got approved fromE-I.C.

Point wiring for telephone point with 4 pair CAT-6 wire with RJ 11 jack type socket with shutter in a box with connector.

Telephone Tag Block (TTB) : Supply, installation, testing& commissioning of following readymade Krone connector telephonetag block box, 18 SWG MS CRCA sheet, concealed/surface mountedon MS frame of size 40 x 40 x 5mm and grouted on the wall/fixed onthe column free standing type with anchor fasterners, cable end/wireway box,if required, with adequate space facility to be provided in theTTB, with front operable hinged door, neoprene rubber/cork gasketfor joints, wire bunching clamps , name plate etc. all as per standards,specification, drawing & instructions of E.I.C. Note:1) Point distribution diagram shall put in side the DB with polythene protective cover. 2) All fabrication drawings shall be got approved. 3) Disconnection module shall be Krone Part No. 69011006-02 or equivalent approved.

20 pair telephone tag box : A set consisting of : 1) Disconnection module 2 /10 --> 2 nos. 2) Back mounting frame - 2/11 --> 2 nos ( C.T. box with mounting bracket ) 3. Transparent dust cover --> 1 no. complete with all accessories 4. Label Holder - 1 no

TOTAL OF TELEPHONE SYSTEM WORKS CARRIED OVER TO ABSTRACT

Section - VII: Earthing MAINTENANCE FREE EARTHING SYSTEM : Supply,installation,testing & commissioning of maintenance free earthing system & associated works, etc. complete as per specifications & instructions of E-I-C. NOTE:Measurement of resistance of earthing grid must be carried out as perinstructions of EIC.

Providing and making earth station comprising of 17.2 mm dia 3m longearthing electrode of high tensile low carbon steel rod molecularlybonded 250 micron copper coating on the outer surface, UL listed,filling bore with suitable earth enhancement compound as per IEC62561-7 & manufacturer's standard, surrounding the earth electrodecomplete with all required materials & instructions of EIC. Notes: The scope includes :- 1) Installation of earth rods including making pit/ drilling suitable sizebore holes in normal soil/ hard rock as per manufacturer'srecommendations & design.2) Exothermic welding of joints between earth electrode & GI / tinnedCu strip and between GI / tinned Cu strips, used for interconnection ofearth electrodes.

Providing & making concrete chamber (1:2:4) of size 600 x 600 x 600mm (inside dimension) with 10 mm thick MS hinged cover mounted on40 x 40 x 5 mm thick angle iron frame, 37 x 6 mm & 150 mm long GIequipotential bar mounted inside chamber as per instructions of EIC. (For housing Equipotential bar)Note: The date of testing and earth resistance value shall be writtenon the cover with black base with yellow paint.

G.I / tinned Cu earth wire/earth strip fixed on wall/side of trench/slab/column /beam/ shaft connection to panel/DBs/SFU's etc. with 5mmthick G.I. Spacers & 2mm thick G.I. Saddle or in ground at 500 mmbelow with earth enhancing material surrounding the strip, includingexcavation in ground, refilling & removal of excess earth within aradius of 500 m, temporary instatement & back filling of trench,consolidation, painting with two coats of black bituminous paint forearth wire/ strip in ground & green enamel paint for earth wire/ strip on surface etc.

37 X 6 mm G.I. strip

25 X 6 mm G.I. strip

25 X 3 mm G.I. strip

4 SWG G.I wire

8 SWG tinned Cu wire

TOTAL OF EARTHING WORKS CARRIED OVER TO ABSTRACT

Section - VIII : LAN System

Point Wiring : (LAN,Wifi and CCTV points) Point wiring with CAT-6 cable in MS/PVC conduit HMS variety of size 25-40 mm dia ISI mark concealed inslab /column/beam/ surface wherever required complete with bends, T/ Cross, junction box with all accessories with RJ-45 shuttered socket outlets (modular) concealed / surface in wall/column /wherever required with all accessories including label holder, face plate, factory made zinc passivated box, screws etc terminated at one end at patch panel at respective floor at the other end in outlet with an extra loop length of approx 2 m at patch panel, ferrule numbers on both side, all terminations as per standards, drawing,specifications and as per instructions of E-I-C. Notes: 1. Patch panel shall be measured seperately. 2.Colour of the outlet and facia plate shall be matching with electrical switches and sockets with the approval of E-I-C. 3. 12 points out of 45 pts. are there for CCTV.

Supply, installation, testing & commissioning of 19" racks of minimum 27 U height, with ISMC - 100 x 50 mm MS channel fixed on floor with all mounting arrangement including grouting with rag bolts, nuts, washers with massionary work, if required, suitable arrangement for cable entryfrom top and bottom , sealing of cable entry, earthing etc., acryilic glassdoor with locking arrangement with following accessories : a) Cooling fan position tray with 4 fans (230 V AC) - 1 no b) AC power panel with minimum 8 nos 6 A socket, fuse and 8 switches -1 panel. c) Mounting accessories eg cage nuts, screws, supporting angles etc. forswitch , patch cord panels, fan tray, LIU, etc. d) Blanking plates as required e) Vertical cable manager - 1 no.

Supply, installation, testing & commissioning of double section 19" wall mounted 15 U height LAN rack with acrylic glass door with following accessories : a) Fan position tray with 2 fans (230 V AC) -1 no b) AC power panel with minimum 6socket, fuse and 6 switches - 1 panel c) Internal mounting accessories eg. Cage nuts, screws, supporting angles etc. for switch , patch cord panels, for tray, LIU, etc. d) Blanking plates as required e) Vertical cable manager- 1 no

Patch Panels: Supply, installation , testing & commissiong of 24 port, 19" rack mountable patch panel equiped with RJ-45 receptive female, CAT-6 UTP or better compatible to cat-6 cable and cable managers complete as required as per instructions of EIC.

CAT-6 Cable for Up-linking :Supply, installation, testing & commissioning of CAT-6 UTP cable in 25mm dia PVC (HMS variety) conduit on 5mm. thick G.I. spacersfixed with no. 10 nettle fold wood screws with nylon plug completewith all conduit accessories 20 SWG G.I. Saddles etc. for uplinkingbetween patch panels, as required, including termination includingend termination at both ends complete with all accessories all asrequired & as per instruction of EIC.

TOTAL OF LAN works CARRIED OVER TO ABSTRACT

Section-IX: Fire Alarm System Design,supply,installation,testing & commissioning of Analogue addressable microprocessor controlled fire alarm system as per relevant Indian Standard specifications and conforming with relevant specifications of fire authorities of local Municipal Corporation, and as directed by E-I-C . Fire alarm system shall be capable of being IP networked to the central monitoring System connecting through optical Fiber cable network to monitor and integrate above quantity of accessories like detectors, MCP's/ loop power sounder/control modules, Fault Isolation Modules, Loop powered hooters, response indicators, fire/fault indicators, audio-visual signals, central processing units, complete with LED visual indicators, alpha-numeric display and audible alarm both for fire & fault, mains ON indication, test & reset provisions. Each loop should provided with minimum 125 detectors /devices. The panel shall include integral SMF lead acid batteries with sealed cells (max24 V) with appropriate AH capacity, as per IS requirement with integral battery charger, wire way box , if required , front openable lockable cover with front glass etc. complete as required and as per specification & instructions of EIC.

Note: If charger & battery-capacities provided in redymade panel are not meeting operation requirement as per IS 2189 then charger & batteries shall be provided separately including wiring at no extra cost. Notes: 1) The system shall be got approved by municipal fire authority before start of work and after completion if required. 2) Scope includes submission of factory test report of detectors,break glass and hooters and main panel and final inspection at site. 3)Make of all the components of FAS shall be same. 4) The Panel shall be suitable for networking using open technologies such as TCP/IP, Rs 485,modbus.

FA Panel: Supply, installation, testing & commissioning of min. 4 loop Fire Alarm Panel suitable for wall mounting complete with operating front, 2 loop cards, interconnecting cables etc. as per instructions of FA panel with angle iron framework etc. without extra cost.

Multisensor Detectors :Supply ,installation,testing & commissioning of Intelligent addressable smoke detector unit working on multisensor detection technology with optical , heat detector sensor with inbuilt fault isolator complete with base as required & as per instructions of EIC.

On slab

Above false ceiling

Heat Detectors (Thermal Detectors): Supply, installation, testing & commissioning of Analog Addressable Heat Detectors with solid state design with sensing element combination of fixed type and rate of rise of temperature indicating LED,mounting base etc. as per detailed Specification.

Manual Call Point :Supply ,installation,testing & commissioning of dust and vermin proof Addressable Manual Call Point, break glass/pull station (square type/roundtype suitable for wall mounting surface/ concealed) having painted/engraved/ embossed as “IN CASE OF FIRE, BREAK GLASS” on it, small hammer fixed with chain (in case of break glass), painting and other accessories as required, complete asrequired & as per instructions of E- I-C.

Response Indicator: Supply ,installation,testing & commissioning of response indicator suitable for connecting in parallel to the multisensor & wall mounting type with provision of 25mm dia conduit entries, painting & other materials as complete as per specifications & as per instructions of E-I-C.

Loop powered Sounder with Strobe Light (Hooter): Supply ,installation,testing & commissioning of Wall Mounting Alarm Intelligent loop powered sounder complete as per specifications and as required & as per instructions of EIC.

Wiring for Fire Alarm System :Wiring with 2 nos. 1.5 sqmm FRLS-PVC insulated Shielded twisted pair copper cable/wires in 25mmdia concealed/surface MS/PVC conduit (HMSvariety) including cost of cutting and filling chases for concealed conduit/ cost of saddles etc. for surface conduit as required and including the cost of crimped termination’s as required, complete as per instructions of E-I-C.

TOTAL OF FIRE ALARM WORKS CARRIED OVER TO ABSTRACT

Section - X : PA System

Supply, installation, testing & commissioning of 8 zone digital System Controller complete in 19'' Rack mountable Dual tone, integration with existing Fire alarm system,control for Speech & Music, tone generator & Speech Processor with relays for activating tone & pre-recorded fire alarm messages etc as specified in the Tender Specifications.

Supply, installation, testing & commissioning of 19" floor mounted 24 U height rack with acrylic glass door with following accessories : a) Fan position tray (230 VAC) as per manufacturers standard. b) AC power panel as per manufacturers std. c)All Internal wiring and mounting accessories eg.Cage nuts, screws, supporting angles etc d) Blanking plates as required e) Horizontal cable manager- 2 nos.

Speaker on wall

Speaker on Ceiling

Call Station :Basic Call Station with Power 'ON' indication,status/fault indications, priority level of destinationis higher than that of the pending announcement indication, Supervision of microphone capsule and with built in On board DSP power for local audioprocessing. The call station basic can make manual or prerecorded announcements to any pre-assignedzones. The call station shall be provided with 18" gooseneck type microphone. The call station shall be provided with built in numerical keypad. The call station shall be fully supervised and must supports fail-safe operation. Even if the network controller fails, thecall station shall be able to put through emergency calls and as specified in the tender specificationsand as per instructions of EIC. similar to M/s Bosch PAVIRO system Cat no. PVA-15CST or equivalent approved.

Digital Power Amplifier :Supply ,installation,testing & commissioning of 19''rack mounted class-D : 2x500 W Power Amplifier with on board DSP power for local signal processing,Switched mode power supply, Local audio inputs ,Mains and battery operation and supervision, complete with following types as specified in the tender specifications and as per instructions of EIC similar to M/s Bosch PAVIRO amplifier Cat no PVA-2P500 or equivalent approved.

PA system cabling: Supply ,installation,testing & commissioning of 2core shielded, twisted, multi stranded, nominal size of conductor shall be nominal 1.5sqmm, overall PVC insulated and armoured cable (Blue colour) on surface/ above false ceiling including cost of GI spacers, saddles etc. and including the cost of termination’s as required, complete as per instructions of E-I-C. The cost of mounting base boxes & the cost of providing cable glands etc shall be included in the scope of work.

Supply & installation of DVD player with USB support, in-built compressor & limiter as per instruction of EIC.

Supply and installation of 3 kVA online double conversion UPS complete with wiring from UPS to existing power point and to public address console panel in 19'' rack (to be mounted in existing Rack).

TOTAL OF PA System WORKS CARRIED OVER TO ABSTRACT

Section - XI : Miscellaneous Items

CABLE TRAYS AND CABLE MANAGEMENT SYSTEM :

Supply and installation of following size of ladder type strip galvanised cable trays including horizontal and vertical bends, reducers, tees, cross members and other accessories as required and duly suspended from the ceiling/wall with hangers, threaded rods, supports etc., as required.

300mm width x 50mm depth x 1.5 mm thickness.

150mm width x 100mm depth x 1.5 mm thickness.

150mm width x 25mm depth x 1.5 mm thickness.

M. S. Boxes: Fabrication, supply and installation of M.S. supports/ boxes as per specification.

MS Fabrication : Supply, fabrication and installation of supports using MS channel/angle/flat/MS rod hangers etc. including painting with two coats of primer and two coats of epoxy paint of approved shade as per instructions of EIC.

Hume Pipes: Supply & installation of heavy duty RCC 150 mm dia Hume pipe of class NP3' to be laid in ground/from concretecable trench to ground, for passing of cables with necessary joints,concrete supports. Scope includes escavation below ground level inall types of soil/concrete road cutting/foot path cutting, nallahcutting /any RCC wall/floor cutting including back filling,dewatering, consolidation, reinstatement of excess earth within theradius of 500 m and original, disposal making good to the originalfinish etc. spare space of hume pipes after cable laying and spareshume pipes shall be sealed properly with fireproof materials.

Supply, installation of GI pipe of B class of following sizes sleeves in beams/ column/ slab for passing electrical cables/conduit as per instruction of E-I-C.

40mm dia GI pipe

80mm dia GI pipe

HDPE pipeSupply & laying of 40/32 mm OD/ID self lubricated HDPE pipes inground at a depth of 600mm, cutting of existing footpath, road, etc.,sand bedding, laying of warning tape on top, temporary reinstatementback filling, dewatering if necessary consolidation, disposal of excessearth with in the radius of 500mm etc. or fixed on wall/coloumn/slabwith 5mm thick M.S. flat/ GI spacer/angle/ support fixed with coachscrews/ grouted in wall/ anchor fasteners 2mm thick GI fabricatedsaddle, all fixing accessories, etc. complete including painting of M.S.spacers/ angles all as per the attached work specifications andinstructions of E-I-C. Note: Excavation shall be measured separately under respective item of 321.07

Excavation of earth with All types of soil including murram

Excavation of earth with Hard Rock

Supply & installation of heavy duty 150mm dia RCC Hume pipe of class 'NP3' to be laid in ground/from concrete cable trench to ground, for passing of cables with necessary joints, concrete supports. Scope includes escavation below groundlevel in all types of soil/concrete road cutting/footpath cutting, nallah cutting /any RCC wall/floor cutting including back filling, dewatering,consolidation, reinstatement of excess earth withinthe radius of 500 m and original,disposal making good to the original finish etc. spare space of humepipes after cable laying and spares hume pipes shall be sealed properly with fireproof materials.

Blank PVC (HMS) Conduits : Supply & installation of high mechanicalstress (HMS) rigid PVC conduit having ISI marked IS 9537 Part - 3,including fixing accessories & hardware concealed /exposed in slab/wallor on 5mm. thick G.I. spacers fixed with no. 10 nettle fold wood screwswith nylon plug complete with all conduit accessories 20 SWG G.I.Saddles, MS/PVC pull out boxes, MS/PVC junction boxes, couplers,bends binding wires etc. as per site condition & as per instructions ofE-I-C and of following sizes :-

25 mm dia Blank MS/PVC (HMS) Conduits

32 mm dia Blank MS/PVC (HMS) Conduits

40 mm dia Blank MS/PVC (HMS) Conduits

Floor Raceways: Fabricating and installing following size of G.I floor raceways with G.I partion at 100mm, including common G.I cover, earthing with 8 SWG G.I wire and other accessories as required & instructions of E.I.C.

300mm x 38 mm

150mm x 38 mm

Junction box for Floor Raceways: Fabricating and installing following size of G.I junction box for floor raceways including G.I cover, as required & instructions of E.I.C.

Supply, fixing & installation of pre mixed & ready to use M/s. HILTI make firestop foam CP 620 in 300ml bottle for sealing openings in electrical shafts, Telephone shaft, raceways & cutouts, hump pipes & where ever required & as per instruction of EIC.

Supply, fixing & installation of pre mixed & ready to use M/s. HILTI make firestop mortar CP 636 for sealing openings in electrical shafts, Telephone shaft, raceways & cutouts, hump pipes & where ever required & as per instruction of EIC.

Optical Fibre Cable (OFC) :

Supply, installation, testing & commissioning of 48 Core ,9/125 µm, single mode armoured multi tube OFC in existing 50/42 mm OD/ID self lubricated HDPE pipes inground or fixed on wall/column/slab including terminations on existing LIU etc. as per instructions of EIC. Note:The HDPE pipe shall be measured under item no. 13.0 above.

OFC Connection accessories in Network Rack : Supply, Erection, termination, testing and commissioning in inside the Wall mount / Floor Rack, following OFCconnection accessories comprising of following items with suitable quantity required to complete fibre connectivity : a) 24 port fully loaded LIU - 2 nos. b) SC/LC Single mode OFC pigtails - 4 nos. c) SC to LC Single mode OFC patch chords(3m) - 2 nos. d) Any other accessories required to complete connection.

TOTAL OF MISCELLANEOUS WORKS CARRIED OVER TO ABSTRACT

Description of Work / Item(s)

Amount

ABSTRACT FOR PART IV : FIRE FIGHTING WORKS

MECHANICAL WORKS

ELECTRICAL WORKS

Description of Work / Item(s)

Amount

PART IV : FIRE FIGHTING WORKS

PART A - MECHANICAL WORKS

Terrace Fire Pump: Supply, Installation, Testing & Commissioning of Horizontal Centrifugal Pumpset, factory assembled & tested for rated capacity. The pump shall have C.I casing, Stainless Steel Shaft, Standard Fittings, Bronze/SS Impeller and factory fitted with manufacturer's recommended Jaw Type Coupling along with coupling guard. Motor shall be IE-3, TEFC, Squirrel Cage Induction type suitably rated, with synchronous speed not exceeding 3000 rpm, it’s electrical insulation shall be of Class-F and ingress protection rating shall be IP-55 and motor shall operate at 415 v +/- 10%, 50 Hz +/- 3%, 3 phase AC supply. The Pumpset shall be with MS common base frame and the pumpset along with the common base frame shall be of red colour only. The pumpset shall be installed on a suitable reinforced cement concrete foundation, which shall be as per the Pump Manufacturer’s drawing.

Along with SITC of pumpset, scope and the rate of this item also includes construction of the RCC foundation, provision of readymade G.I Foundation J-Bolts with G.I nuts (2 Nos. of G.I nuts per Foundation J- Bolt shall be provided), rubber anti vibration pads (all as per Manufacturer's recommendations, specifications & drawings), construction of weather proof hood fabricated of 5 mm. thick UV stabilised FRP sheet with M.S frame support fabricated using M.S Angle of 50 mm x 50 mm x 6 mm Thk., above each pumpset to protect it from weather. All works shall be as tender documents and as instructed by Engineer In Charge.

i) 900 LPM at 40 m head Note: - 1) The sketch/ drg of weather proof cover is to be got approved by Engineer in Charge before fabrication of the same. 2) No extra payment will be made for works/equipment/material etc. whose scope and rate are included in this item as stated in the item description.

PIPING:-

Beveled End G.I. Pipes :- Supply, installation, testing and commissioning of Heavy Duty, "C" Class GIBeveled Ended pipes of following sizes confirming to IS-1239 along with all necessary reducers, enlargers, Heavy/C Class fittings (Tees, Bends etc.) , flanges, jointing (screwed / welded / flanged etc.) and requiredsupports with two coats of paint as per color code of the piping systemsover two coats of red oxide primer, including all hardware, complete in allrespects as per specifications and as instructed by Engineer-In-Charge.

25 mm dia

40 mm dia

50 mm dia

65 mm dia

100 mm dia

150 mm dia Note: 1) All fittings, reducers, enlargers shall be of Heavy Class only. 2.) All Sprinkler fittings shall be of heavy class and sprinklers shall be threaded to their fittings.

M.S Seamless Pipes of Schedule 40 Supply, Installation, Testing and Commisioning of MS seamless pipe of following Sizes and Minimum thickness conforming to ASTM 106 A, Grade B with all seamless fittings, flanges, jointing, supports (Support for piping shall bepaid separately) and painting with two coats of anti corrosion paints over two coats of red oxide primer (for laying above ground) and including providing wrapping with 4 mm thick PYPKOTE(corrision protection tape) with adhesive / coats as required (for laying underground) including all the hardware, complete in all respects of work, all as per drawings, specifications and instructions of E-I-C. NB. : Making of flanged joints including providing G.I nut bolts, blind flanges and gaskets shall be considered in the scope of the bidder.

100 mm dia. (Above Ground)

100 mm dia. (Below Ground)

150 mm dia. (Above Ground)

150 mm dia. (Below Ground) NB : 1) The pipe lines shall be measured along the centre line. NB: 2) Wherever Pipes are crossing through Slab or Wall or Parapet, Only Core Cutting will be acceptabe for making required holes and any Core cut done for laying of the Fire Fighting pipes shall be included in above items' rates and no extra payment will made for the same

GATE VALVES

CI Gate Valves: Supply, installation, testing and commissioning of double flanged CI/CastSteel Gate Valve of required sizes of ratings PN 1.6 with rising stem conforming to IS-14846 with all necessary fittings like flanges, neoprene gaskets, nut bolts, hardware, flanges, neoprene gaskets, nut bolts,hardware, flange joint etc. as shown in the drawings and as per specifications and as instructed by Engineer-In-Charge.

G.M Gate Valves: Supply, installation, testing and commissioning of heavy pattern screwdown Gun Metal Gate Valves of following sizes confirming to Class 2 of IS :778 with hand wheels at top including testing for a pressure of 16 kg/sq.cm.for two hours, all as per specification, drawings and as instructed byEngineer-In-Charge.

50 mm dia.

Non Return Valve: Supply, installation, testing and commissioning of double flanged CI/ Cast Steel, non return valves of following sizes and of rating PN 16, inline with IS 5312 or any relevant standard and made of CI body including all necessary fittings flanges, neoprene gaskets, G.I nuts & bolts for fixing with pipe, hardware, joints etc. as per drawings, specifications and as instructed by Engineer-In-Charge.

100 mm dia.

150 mm dia. Note: The NRV shall be chosen such that it shall besuitable for installation on Horizontal pipe/Vertical pipe as per site conditions. All NRV types are included in this item.

HYDRANT SYSTEM

SINGLE OUTLET HYDRANT LANDING VALVE Supply, installation, testing & commissioning of Single outlet SS hydrant landing valve conforming to IS 5290 having 80 mm diameter flanged inlet 63 mm diameter instantaneous type female outlet with SS hand wheel, SS blank cap & GI chain conforming to IS 901, twist releasetype plug including nuts, bolts, washers, gaskets with necessary fittings likeTees, elbows etc. including providing 80 mm diameter GI pipe heavy class conforming to IS 1239 of suitable length to extend the hydrant from downcomer making flanged/welded joints, testing the unit, painting the hydrant valve and the exposed portion of GI pipe with 2 coats of signal red paint of approved make over a coat of approved make of primer, all as per specification and as instructed by Engineer-In-Charge. Note: The rate of this item also includes installation of orifice plate made of Stainless Steel having a thickness of 6 mm, using G.I Nuts and Bolts. The orifice plate shall have the same outer diameter and Bolt Hole PCD as the flange of the Hydrant Valve. The orifice plate shall have a bore of sufficient size for restricting the pressure at any hydrant as per fire brigade's requirement

External Hydrant: Supply, Installation, testing & commisioning of Single Outlet Hydrant valve of oblique Morris pattern Stainless Steel (SS-304) landing valve with C.I. hand wheel, detachable stainless steel female coupling, confirming toIS-5290/5041 having instantaneous coupling having 63 mm dia. blank cap and chain confirming to IS 901 to suit the hose pipes, including nuts, bolts, washers, gaskets, with necessary fittings like tee, bend etc, testing the unit,painting the Hydrant valve with 2 coats of red paint over a coat of Zinc reached primer, all as per specifications and as directed by E-I-C. Note: 1) Rate includes the provision of 100 NB M.S Seamless pipe, Seamless fittings, 4 mm PYPKOTE, 100 NB C.I Gate Valve, Flanges with G.I Nuts and Bolts from hydrant to Underground Ring main Pipe as shown in drawing. 2) The rate also includes installation of orifice plate made of Stainless Steel having a thickness of 6 mm, using G.I Nuts and Bolts. The orifice plate shall have the same outer diameter and Bolt Hole PCD as the flange of the Hydrant Valve. The orifice plate shall have a bore of sufficient size for restricting the pressure at any hydrant as per fire brigade's requirement

Hose Reel With Drum: Providing & fixing rubber hose reel of 20 mm diameter x 37 m along with swinging drum along with high pressure braided rubber hose conforming to IS 884 including 8 mm diameter SS cut off nozzle on one end, wall mounting type, necessary brackets suitable suitable for wall mounting, fixing on down comer including connecting the other end to the down comer by providing necessary connecting nipple/coupling, nuts, bolts etc. and providing & fixing 25 mm dia G.M. gate valve of approved make all complete including painting (the drum and brackets shall be painted with two coats of signal red enamel paint from outside and white enamel pain tfrom inside) & as shown and as instructed by Engineer-In-Charge.

Hose Cabinet: Supply, installation & commissioning of 1.6 mm thick MS sheet metal hose cabinet of size 750x650x250 mm for accomodating 02 nos. of hose pipes (measured & paid seperately under relevent SOQ item) and SS-304 branch pipe with nozzle. The box shall have front glass door lock with angle iron frame. The hose pipe box shall be fixed with Hilti make Anchor Fastneron the wall or nut bolts (in case of stand in open space) as shown in the drawing and as directed by EIC. The MS box shall be painted with two coats of signal red enamel paint from outside and white enamel paint from inside. The scope also includes supplying of gun metal / stainless steel branch pipe of 63 mm dia. fitted with detachable hexagonal nozzle of 19mm dia. conforming to IS : 903 or universal pattern as per IS : 2871. The branch pipe with detachable nozzle shall be placed in the hose cabinet complete in all respect as instructed by Engineer-In-Charge. Note: The Hose Box Key shall have a Keypocket.

Hose Pipe (For Hydrant Landing Valve): Supply and installation of Unlined Flax Canvas (hose pipe) for fire fighting conforming to RRL fire hose type A or Synthetic Fibre Woven-Jacket (SFWJ) Elastomeric fire hose type B conforming to IS:636 all with ISI marks as required and of approved make and of 63 mm dia & 15 mtrs length, fitted with male and female SS coupling confirming to IS:903, ISI marks with guaranteed bursting pressure of 35.7 kg/sq.cm and complete as per the technical specifications and as instructed by Engineer-In-Charge. Each set shall comprise of 2 hose pipes.

Pressure Guages: Supply, installation testing and commisioning of pressure gauges of SS material with dial not less than 150 mm dia of appropriate range and complete in all respects with shut off gauge, cocks, all fittings etc, duly calibrated before installation in MKS and FPS units and duly tested after installation as per drawing and as instructed by Engineer-In-Charge.

Air Release Valve: Providing and fixing 20/25/40/50 mm dia (dia shall be as applicable as per relevant IS code) (PN - 1.6, Type-S1, Flanged, ISI marked) air release valve conforming to IS - 14845 : 2000 with Double Flange isolating valve (pressure rating PN 1.6) including making necessary flanged joints and providing all fitting materials nuts, bolts etc. and providing T on the pipeline for its installation at site all as per technical specification, drawings and as instructed by Engineer-In-Charge.

M.S. Supports / Structure: Supply, cutting, fabrication, welding, erecting & fixing in position of M.S.support/structure (angle, channel, beam, plate, chequered plate etc.) for steps and other purpose (not applicable for items for which supports are already included in the item) including painting with two coats of synthetic enamel paint of approved make & shade over a coat of approved steel primer all as instructed by Engineer-In-Charge. Material shall conform to IS-2062. Note: Wherever M.S Supports shall be provided for Vertical pipes, ready made G.I U - Clamps along with G.I nuts and bolts shall be provided and no extra payment shall be made for the same.

PCC Pedestals: Providing PCC pedestals /thrust /anchor block of required sizes forTerrace Pipes and specials with cement concrete 1:2:4 at required intervals including form work, curing, finishing etc. complete in all respect as per standard specifications and as instructed by Engineer-In-Charge.

Fire Extinguisher:

Proividing & fixing of Dry Chemical Powder (ABC) type fire extinguisher of 06 Kg capacity either portable or trolley mounted as per approved make fitted with pressure indicating gauge, internal tube, squeeze lever type valve fully charged with ABC powder (Mono Ammonium Phosphate) pressured by Nitrogen complete in all respects including wall suspension bracket and conforming to IS 15683-2006. The Fire extinguisher shall be supplied and placed without any damage, scratches and loss of accessories as per specifications and as instructed byEngineer-In-Charge.

Providing & fixing of, CO2 type fire extinguisher of 6.5 Kg capacity either portable or trolley mounted, highly effective against B & C class of fire, having ISI certification mark, having flat base including valve, discharge hose & complete in all respects including initial fill with CO2 gas conforming to IS 15683:2006, wall suspension bracket as required & as per instructions of Engineer In Charge. The Fire extinguisher shall be supplied and placed without any damage, scratches and loss of accessories as per specifications and as instructed by Engineer-In-Charge.

Fire Bucket Supply and placing of fire sand bucket filled with dry and clean sand to be kept on floor or wall hook confirming to IS 2546. The fire bucket shall be galvanized mild steel of 9 litres capacity. The bucket shall be provided and placed as per instruction of EIC.

Bucket Stand Providing floor mounting stand for keeping 2 Nos. of FIRE buckets of 1000mm in length, 900mm in height, frame made out of 30x30x4 mm M.S.angle, rectangular bottom frame with cross supports for legs, suitable G.I.pipe shall be welded on the top end of of legs with 2 hooks on GI pipe for sand buckets and duly painted with one coat of red oxide and two coats of black paint all complete as per the given drawing, specifications or instruction of Engineer-In-Charge (E.I.C.)

Siamese Connections:

2 Way Siamese Connections Supply, installation, testing & commissioning of Siamese connections having two numbers of 63 mm diameter G.M/SS inlet (instantaneous male coupling) along with one number 100 mm diameter C.I. double flange non return valve of rating PN 16 conforming to IS 5312 and one number of C.I Gate Valve having rating of PN 16 and conforming to IS 14846 and fittings all connected to 100 mm diameter M.S/G.I pipe with necessary fittings including blank caps, flanges and joints, welding etc. and supplying and fixing of inlet housing box made out of 14 gauge M.S Sheet with angle and frame of suitable size and painting with two coats of synthetic enamel paint over a coat of approved primer over pipes and housing box and white enamel paint inside housing box complete in all respects as per specification and as instructed by Engineer-in-Charge. Note: Payment for NRV and Gate Valve shall be made under relevant item. The housing box shall be able to be locked with key and it shall have a key pocket for housing the key which all shall be provided at no extra cost to the department.

4 Way Siamese Connections Supply, installation, testing & commissioning of Siamese connections having four numbers of 63 mm diameter G.M/SS inlet (instantaneous male coupling) along with one number 150 mm diameter C.I. double flange non return valve of rating PN 16 conforming to IS 5312 and one number of C.I Gate Valve having rating of PN 16 and conforming to IS 14846 and fittings all connected to 150 mm diameter M.S/G.I pipe with necessary fittings including blank caps, flanges and joints, welding etc. and supplying and fixing of inlet housing box made out of 14 gauge M.S Sheet with angle and frame of suitable size and painting with two coats of synthetic enamel paint over a coat of approved primer over pipes and housing box and white enamel paint inside housing box complete in all respects as per specification and as instructed by Engineer-in-Charge. Note: Payment for NRV and Gate Valve shall be made under relevant item. The housing box shall be able to be locked with key and it shall have a key pocket for housing the key which all shall be provided at no extra cost to the department.

Road Cutting and Resurfacing: Cutting the existing asphalt road and demolishing WBM or BBM including rubble soiling if any for providing services and making good the same after the work is satisfactorily completed, including relaying of soiling doing water bound macadam, bituminous bound macadam road providing and laying 50 mm thick asphaltic layer etc., complete as instructed by Engineer-in-Charge.

Ordinary soil

Soft Rock

Hard Rock

Valve Chamber: Construction of brick masonary valve chambers of following sizes comprising of 230 mm thick brick masonry in cement mortar 1:4 over a bed of 150 mm thick cement concrete of grade M-15 for foundation with 150mm offset all round, including providing and fixing M.S foot rests fabricated using M.S Angle of 50 mm x 50 mm x 5 mm and each weighing not less than 5 Kg. first step at 450 mm from top of cover, remaining @ 300 mm centre to centre staggered with 380 mm spacing, painting etc. racking out joints & plastering in cement mortar 1:3,20 mm thick both on internal and external surfaces, internal surfaces finished smooth with a floating coat of neat cement, providing 100 mm thick RCC slab casted in M.S. angle box frame (Galvanised) of 25 mm x 25 mmx 4 mm size in three equal pieces with reinforcement weighing not less than100 kg/cu.m, fabricated M.S. angle all around & M.S. galvanised flat stiffners including formwork as per drawing etc. complete with lifting hooksat top, providing and fixing C.I. circular surface box weighing not less than14 kg. over the RCC slab for key rod operation, painting all as per specifications and directions of EIC including dewatering the pit, if required till completion of the work.

1.2 m width x 1.2 m length x 1.2 m depth

1.2 m width x 1.2 m length x 1.8 m depth

Sprinklers

Supply, installation, testing & commissioning of 15 mm dia recessed sprinkler with quartzoid bulb and set to operate at 68 deg Celsius, with rosette plate [Pendent type Sprinkler (K-80), FM & UL approved] with all assembly complete in all respects as directed by EIC. Note: All Sprinkler pipe fittings shall be of Heavy Class and hot dip galvanised only. The sprinklers themselves shall be threaded to socket type fittings and not welded to them.

Supply, installation, testing & commissioning of 15 mm dia recessed sprinkler with quartzoid bulb and set to operate at 68 deg Celsius, with rosette plate [Upright type Sprinkler (K-80), FM & UL approved] with all assembly complete in all respects as directed by EIC. Note: All Sprinkler pipe fittings shall be of Heavy Class and hot dip galvanised only. The sprinklers themselves shall be threaded to socket type fittings and not welded to them.

Flexi Drops Supply, installation, testing & commissioning of Sprinkler Flexible drop pipes made of Corruggated SS Tubing to withstand 16 Bar pressure with welded reducer on one end to directly accomadate sprinkler & female checknut on the other end to connect to the branch pipe with supports complete [Length 1.5 mtr, FM & UL]

ALARM VALVE Supplying, erecting and fixing in position Fire sprinkler Alarm Valve of following sizes and of HD / TYCO make with inlet and outlet connections pressure gauges etc complete as per the given drawings, specifications or instruction of the EIC.

150 mm dia.

TOTAL OF PART A - MECHANICAL WORKS

PART B : Electrical Works

10) Water level Controller with 3 nos. stainless steel probes similar to M/s Minilec make cat no. WLC D1.The 3 Nos stainless steel probes with required lengths of PVC wires & connectors shall be mounted on overhead fire fighting water tank & the MS supporting arrangement shall be measured seperately - 04 sets (2 for each Fire tanks) 11) Low level indicator- 1 set B) Bus bar 100 A TPN tinned copper bus bar having maximum current density of 800 A/sq.inch to withstand symmetrical fault level of 25 kA at 415 V. The neutral bus bar shall have 100% capacity. Notes: 1) All indication lamps shall be LED type. 2) Cost of all the items, accessories, tools and tackles, packing etc required to put Stater Panels in service shall also be included in rate quoted. 3) MCBs shall be motor duty. 4) MCCB shall have thermo magnetic releases with rotary operating front drive mechanisism and 25 kA breaking capacity.5) Routine test shall be conducted at factory as per relevent IS.

REMOTE ON / OFF P.B. STATION Supply, installation, testing and commissioning of 14 SWG MS CRCA sheet, remote ON/OFF push button enclosure, with ON / OFF indication lamps, IP 42, wall mounting type, powder coated with Singal red color shade complete with internal wiring with 1.5 sq.mm copper PVC FRLS wires etc. Notes: 1) ON - OFF indication lamps shall be heavy duty LED type, 240V, 50 Hz 2) PB station shall be lockable type to prevent unauthorized operation of booster pump. Viewing window shall be provided for monitoring pump operation status

L.T Cables: Supply, installation, testing & commissioning of 1.1 KV grade XLPE insulated, inner sheath PVC tapped, extruded FRLS PVC outer sheath and and antirodent termite repellent properties, GI strip / wire armoured, copper conductor powercable confirming to IS : 1554 part I/IS 7098 part-1 with upto date amendments, fixed on wall/column/slab/false ceiling or in existing hume pipe/trench/ shaft/pit/ on 5mm thick M.S. flat /GI spacer/angle/ support fixed with coach screws/grouted in wall/anchor fasteners 2mm. thick G.I. Fabricated saddle, all fixing accessories, etc complete including painting of M.S spacers/angles and saddles all complete as per enclosed detailed specifications, drawings & as per instructions of the E-I-C & of the following sizes. The space between the two support shall be 600mm. approx.3 C x 10 sq.mm copper conductor cable (On Wall / Trench / Cable tray)

3 C x 10 sq.mm copper conductor cable (On Wall / Trench / Cable tray)

End Joints: End jointing of following sizes of cable by crimping with supply of all jointing materials like solderless tinned copper cable socket, Stainless Steel cable glands, gland earthing, insulation tape, flux, duplicate interconnection between gland earthing strip & to the nearest earthing bus terminals as per the drawings, specifications and as per the instructions of the Engineer-in-charge.

4C X 10 sq.mm. copper conductor cable

Control Cable: Supply, installation, testing & commissioning of 3Cx2.5 sqmm 1.1 KV grade multicore copper solid / stranded conductor of following sizes, PVC insulated, FRLSPVC outer sheathed armoured cable between various sensors and starter etc. on existing cable tray/surface on 5mm thick M.S. flat /GI spacer/angle/support fixed with coach screws/grouted in wall/anchor fasteners 2mm.thick G.I. Fabricated saddle, all fixing accessories, etc complete including painting of M.S spacers/angles and saddles etc. providing brass cable number tag as per enclosed detailed specifications, drawings & as per instructions of the E-I-C .The scope also includes end connections at both ends with SS glands etc. as required.

CABLE TRAY: 'Supply & fixing of ladder type GI cable trays of following size with vertical sides on both ends and suitable MS supports including concrete bolts, hold fast etc. The scope includes supply of readymade bends, reducers,Tee, covers etc. as required as per instructions of EIC.

100 mm (W) x 50 mm (D) x 2 mm (T)

Earthing System: Supply, Installation, testing and Commissioning of 4 SWG GI strip/wire fixed to wall/side of trench/ slab/column/beam/shaft with 5mm thick G.I spacers & GI saddles or on existing cable tray along with all required accessories etc.

TOTAL OF PART B - ELECTRICAL WORKS

HARIOM PROJECTS PVT LTD

KALPANA STRUCT CON PVT LTD

HARIOM PROJECTS PVT LTD

KALPANA STRUCT CON PVT LTD

HARIOM PROJECTS PVT LTD

KALPANA STRUCT CON PVT LTD

HARIOM PROJECTS PVT LTD

KALPANA STRUCT CON PVT LTD

HARIOM PROJECTS PVT LTD

KALPANA STRUCT CON PVT LTD

HARIOM PROJECTS PVT LTD

KALPANA STRUCT CON PVT LTD

KALPANA STRUCT CON PVT LTD

ANS Constructions.com

KALPANA STRUCT CON PVT LTD

ANS Constructions.com

KALPANA STRUCT CON PVT LTD

ANS Constructions.com

KALPANA STRUCT CON PVT LTD

ANS Constructions.com