Maintenance and Repairs to the Burial Ground atVilankuruchi in ward no 9 East Zone

Amount

Engaging JCB for Site leveling,etc. complete as per direction of departmental officers.

Scraping the old Damaged plastered area as per the direction of departmental officers etc., complete

Dismantling the old Damaged PCC as per the instruction of Dept officers

Pile Foundation 300mm Dia using Agra as per instruction of Departmental officers instruction etc., Completed

Earth work Excavation for Foundation in all soils and Sub Soil to full depth as may be directed except in hard rock requiring blasting but inclusive of shoring strutting and requiring the sides of foundation.

Cement concrete 1 : 4 : 8 mix using 40mm HBG metal for foundation including watering wherever necessary and laid in layers of not more than 15cm thick., compacting etc., complete complying with standard specifications and as directed.

Random rubble masonry in cement mortar 1: 5 (one cement five sand) in foundation and basement using best HBG Rough stone and Band stone with simultaneous flush pointing etc. complete complying with standard specifications and as per drawings and as directed by departmental Engineers using new rough stone & sufficient bond stones with simultaneous pointing including all cost & conveyance of materials.

Filling of Pallam Sand including watering and Consolidation as per instruction of Departmental officers instruction etc., Completed

Supplying & Erecting centering for sides & soffiots including necessary supports & strutting upto 3.29m height for plane surfaces in all floors with all cross bracings using mild steel sheets of size 90 x 60cm & 10 gauge stiffened, welded with steel angle of size 25 x 25 x 3mm for boarding laid over silver oak joists(Country wood) of size 10 x 6.5cm spaced @ about 90cm c/c and supported by casurina props of 10 - 13cm dia. spaced @ 75cm c/c etc., complete complying with standard specifications and as directed by the departmental officers. Rate for 10m2.for the following items.

Supplying and Fabricating and placing in position MS steel or ribbed for steel for all reinforced cement concrete works as per the design given including cost of steel and binding wire in all floors etc, Complete complying with stanard specification.

Cement concrete 1 : 2:4 mix using 20mm HBG jelly for foundation including watering wherever necessary and laid in layers of not more than 15cm thick., compacting etc., complete complying with standard specifications and as directed.

BRICK WORK in cement mortar 1:5 (one cement and five sand) using best quality of second class (Table molded chamber burnt ) bricks of size 9"x4 ½"x3" for the following including curing etc., complete complying with standard specifications. (Masonry projections wherever necessary for obtaining the required elevation shall be done without extra cost.

Special Ceiling Plastering in Cement Mortar 1:3 mix (one part of Cement and Three parts of Sand) 12mm thick including curing,all labours etc.,Complete

Plastering in Cement Mortar 1:5 mix (one part of Cement and Three parts of Sand) 20mm thick including curing,all labours etc.,Complete

Plastering in Cement Mortar 1:5 mix (one part of Cement and Three parts of Sand) 12mm thick including curing,all labours etc.,Complete

Supplying and fixing in position of INDIAN MAKE WHITE WATER CLOSET of size in 580mm * 440mm weight glassed earthen ware of approved with P Trap (or) S Trap foot rest and filling all round the closet using 20mm broken brick jally in 10cm thick and plaster in c.m. 1:3 12 mm thick including fixing in position leveling complete with necessary connection as per standard specification

Flooring finishing with first quality CERAMIC TILES of all colours of size 305cm X 305cm X 6mm laid in cement mortar 1:3 mix to 20mm thick and painting with white cement using 0.30 kg/1m2 including finishing the jointing and painting flush with tiles surface etc., complete

Supplying And fixing of Galvaome Shed and Water tank StandSupply and fixing of Truss Work using all round MS Pipe "L" angle 25 X 25 X 6mm thick, cross bracing 20 X 6mm M.S.Flat with necessary locking arrangements including cost and conveyance etc.,

Roofing with galvanished iron sheet (corrugated) 24 gauge thickincluding necessary bolt, nuts and bitumen washed etc., completed

Painting with first quality Emulsion paint two coats including thorough cleaning, scrapping, removal of dust and including necessary putty works wherever required etc., completed.

Painting with Enamal paint two coats over the one coat of primer coat for new iron works including cleaning scrapping and removel of dust etc., complete as per the direction of the departmental offiers

Supply and delivery of the following materials approved brand as per list with ISI marking and an approved by Corporation officers.

63mm PVC Pipe

63mm PVC Elbow

63mm PVC Tee

63mm PVC Coupling

63mm PVC FTA

50mm GM Gate Valve

20mm UPVC Pipe

20mm UPVC Elbow

20mm UPVCTee

20mm UPVCCoupling

63x20mm Saddle piece

Supplying and fixing of HDPE Tank 2000 litre including fixing in position leveling and Transporting Charges complete with necessary connection as per standard specification

Supplying and fixing of 6.0m Height tublur pole with base plate of size 300x300x8mm Thick including all materrial, conveyance and fixing charges for Labour etc complte

.Supply of 40w LED light necessary fitting etc., complete

Supply and run of 2 of 4 sq.mm. (56 / 0.3) PVC insulated single core unsheathed copper conductor of 1100V grade in suitable heavy gauge MS coundit pipe on wall and ceiling with continous earth wire connection of 14 SWG TC wire with painting of suitable colour

Supply and fixing of WT Bulk head fitting with guard ( Philips / Bajaj / Crompton / K.lite ) suitable for 11W CFL lamp with CFl(SD83)

Wiring with 2 x 1.5 sq.mm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories in flush with wall with 3mm thick hylum sheet cover with TW switch box and 5A F.T. switch and making good of the open portion with suitable colour for PVC open light / Fan Point (For Eletronic Regulator) (5 Points Per Coil) etc., complete as per the direction of departmental officers. - SD 21

Add :- GST @ 18%

JAYALAKSHMI BUKDERS (BID ID -1161577)