Construction of Minor Bridge on Tundla Awagarh Road to Imliya Kutukpur Erai Road

Dismantling brick work or stone work in lime or cement mortar and including stacking of materials as directed by Engineer-In-Charge within a distance of 60 meters (200 feet).

Excavation for Structures Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out.construction of shoring and bracing, removal of stumps and other deleterious meter. Dressing of sides and bottom and backfilling with approved meterial. Sr No. 12.01, 304.

PCC Grade M15 Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications. 1500, 1700, 2100

RCC Grade M30 Using Concrete mixer, Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications 1500,1700 & 2100.

Supplying, Fitting and Placing un-coated HYSD bar Reinforcement in Foundation complete as per Drawing and Technical Specifications.

Provision of an Reinforced cement concrete crash barrier at the edges of the road, approaches to bridge structures and medians, constructed with Reinforced Cement Concrete with HYSD reinforcement conforming to conforming MoRT&H Specification and as per details given IRC -5 (Fig.-5, b) including dowel bars 25 mm dia, 450 mm long at expansion joints filled with pre-moulded asphalt filler board etc.., as per approved drawing and at locations directed by the Engineer, all as specified. (Area-0.243 Sqm./Meter, Single Face)

Providing P.V.C pipe 75 mm dia for weep whole including of all material T & P etc requried for proper completion of the work

Back filling behind abutment, wing wall and return wall complete as per drawing and Technical Specification 710.1.4.of IRC:78 & 2200

Providing and laying of Filter media with granular materials/stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2. of MoRTH specifications to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and provided over the entire surface behind abutment, wing wall and return wall to the full height compacted to a firm condition complete as per drawing and Technical Specification. 710.1.4.of IRC:78 and 2200

Providing and laying Pitching on slopes laid over prepared filter media including boulder apron laid dry in front of toe of embankment complete as per drawing and Technical specifications

Earth work in cutting or in embankment in ordinary soil excavation to be in the form of a regular pits not exceeding 0.50m in depth and earth work in embankment to be in 20cm layers including ramming and dressing the surface to required levels and slopes ,As pe S.I No-253+253C ,Ch-4 (Including 1 Km Cartage)

Construction of granular sub-base by providing coarse graded material, spreading in uniform layers with motor grader on prepared surface mixing by mix in place mathode with rotavator at OMC and compacting with vibratory roller to achieve the desired density, complete as per clause 401. grade 1

Providing and laying reinforced cement concrete pipe NP-3 1000mm HP for culvert on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 but excluding excavation, protection work, back filling, concrete and masonary works in head walls and parapits clouse 1106. (39 of Ch-1)

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate watering and compacting to the required density grading 2 as per technical specification clause-405

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate watering and compacting to the required density grading 3 as per technical specification clause-405

Providing and applying primer coat with bitumen emulsion (SS1) on prepared surface of granular base including cleaning of raod surface and spraying primer at the rate of 0.70 kg/sqm using mechanical means as per technical specification clause-502

Providing and applying tack coat with bitumen (VG-10) at the rate of 0.35 kg per sqm on the prepared granular surfaces treated with primer & cleaned with Hydraulic broom as per technical specification clause-503

Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kn static roller capacity, finished to required level and grades. as per Technical Specification clause-508

Providing & laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type-C as per Technical Specification clause-510

Please Enable Macros to View BoQ information