ELECTRICAL WORK

Amount

Providing and fixing of fire huts for keeping various fire fighting equipment work involves as below : - Fabrication of 02 Nos. 3.0 mtr long and 06 No. 2.5 mtr long vertical sqaure shape support from 65x65x5 cm GI angles and welding the piece of 10 cm. Angle from 65x65x5 mm in the bottom of support. Execavation of 08 Nos. pits of size 20x20x20 cm and concreating of 08 Nos. vertical support with ratio of 1:2:4 of cement core sand and 20 mm stone ballast in proper level and alignment. Fabrication of top structure from 50x50x5 cm or 65x65x5 mm GI angles having the size of 3.0,2.5,1.2 & 4.0 mtr GI angle piece as per requirement. Welding these pieces on vertical support to make the frame of hut type. Painting the structure with two coats of red colour synthetic enamels good quality paint. Supply and fixing of 6.0 mm thick gray colour corrugated asbestos roofing in position with MS "J" nuts & bolts including supply of required material, labours and T&P etc. Flooring the complete hut by first class brick work in ratio 1:4 of cement and core sand with 12 mm thick plaster in ratio 1:2 of cement and core sand including these supply of related material and labour and T&P etc. (Note GI angle iron scrap will be provided by the department free of cost to the contractor.

Providing of shut down plate made of 2.0 mm thick aluminum sheet of size 300x150 mm covering of 3 M HIP/MDG retro reflective sheet of yellow colour in single piece. The letters shall be computer cut & blue colour with all mounting arrangement as per requirement of site or instruction or incharge SDO/JE

Providing of break down plate made of 2.0 mm thick aluminum sheet of size 300x150 mm covering of 3 M HIP/MDG retro reflective sheet of yellow colour in single piece. The letters shall be computer cut & blue colour with all mounting arrangement as per requirement of site or instruction or incharge SDO/JE.

OHM ENTERPRISES AND ENGINEERS

msn construction company