Loading
Loading…
Loading…
Tender ID
Tender Value
₹28.1 L
EMD Value
₹56,200
Closing Date
3 Apr 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
DRAWING
12 conditions · 1 needing a document upload
a) Electrical License: The tenderer/Firm should have valid electrical contractor license on their own name or firm name issued by Electrical licensing board of any state. The license should have been issued on a date prior to the date of tender opening. Copy of License shall be uploaded online failing which offer will be rejected. Note: In case of expiry of validity of license during contract, the contractor should renew the license so that it is always valid during contract.
I/we the tenderer (s) am/are signing this document after carefully reading the contents.
I/We the tenderer(s) also accept all the conditions of the tender and have signed all the pages in confirmation thereof.
I/we hereby declare that I/we have downloaded the tender documents from Indian Railway website www.ireps.gov.in . I/we have verified the content of the document from the website and there is no addition, no deletion or no alteration to the content of the tender document. In case of any discrepancy noticed at any stage i.e. evaluation of tenders, execution of work or final payment of the contract, the master copy available with the railway Administration shall be final and binding upon me/us.
I/we declare and certify that I/we have not made any misleading or false representation in the forms, statements and attachments in proof of the qualification requirements.
I/We also understand that my/our offer will be evaluated based on the documents/credentials submitted along with the offer and same shall be binding upon me/us.
I/We declare that the information and documents submitted along with the tender by me/us are correct and I/we are fully responsible for the correctness of the information and documents, submitted by us.
I/we certify that I/we the tenderer(s) is/are not blacklisted or debarred by Railways or any other Ministry / Department of Govt. of India from participation in tender on the date of submission of bids, either in individual capacity or as a HUF/ member of the partnership firm/LLP/JV/Society/Trust.
I/we understand that if the contents of the certificate submitted by us are found to be forged/false at any time during process for evaluation of tenders, it shall lead to forfeiture of the Bid Security and may also lead to any other action provided in the contract including banning of business for a period of upto two year. Further, I/we and all my/our constituents understand that my/our offer shall be summarily rejected.
I/we also understand that if the contents of the certificate submitted by us are found to be false/forged at any time after the award of the contract, it will lead to termination of the contract, along with forfeiture of Bid Security/Security Deposit and Performance guarantee and may also lead to any other action provided in the contract including banning of business for a period of upto two year.
I/We have read the clause regarding restriction on procurement from a bidder of a country which shares a land border with India and certify that I am/We are not from such a country or, if from such a country, have been registered with the competent Authority. I/We hereby certify that I/we fulfil all the requirements in this regard and am/are eligible to be considered (evidence of valid registration by the competent authority is enclosed)
9 conditions · 1 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Tenderer /s are required to submit a scanned / attested copy of following information along with their tender- 1. Bank Account No 2. Name of Bank 3. Indian Financial System Code {IFSC} 4.PAN No 5. Tenderers Contact No Contractor should provide firms PAN, issued by Income Tax Department with his quote or within30 {Thirty} days of award of contract. No payment will be released without submission of PAN. All taxes including surcharge and cess shall be recovered from his payment as per tax provisions in vogue.
The tenderer shall thoroughly go through the entire tender document and strictly adhere the instructions and directions given at different pages.
It is responsibility of the tenderer that they ensure to see any corrigendum of the tender to check the corrigendum on the website from time to time.
All the required/supporting documents should be scanned and uploaded.
In case the date of closing mentioned in the Notice Inviting Tender is declared a holiday/bandh/strike etc. on any account, the date of closing tender online will not be changed as the application in the website of IREPS does not permit submission of any offer after closing date and time of the tender. However, opening of tenders online will be on any convenient day after the closing date/time of tenders.
Opening of e-tender online:- The e-tenders will be opened online using the IREPS portal. No representative is required to be present for opening of tender and taking notes of rates quoted and ranking as the complete details of rates etc. of all the bidders shall be available to the bidders in the website after the opening of the tender.
Provision of AT supply for Intermediate block signalling (IBS) huts at CRU, PAU, MQL, LBG and PBN in MUE-PBN section in Nanded Division -Electrical Arrangements.
NED-E-51-2025-26
NED-E-51-2025-26
Open
Works - General
6 Months
Nanded, Maharashtra
₹0
₹56,200
3 Apr 2026
12 Mar 2026
20 Mar 2026
59 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 28,08,745.15 | ||
| — | 25.00 | — | — | ||
| Supply and fixing of 20 W LED Tube Light fittings conforming to CEE/SC's specification no. SCR/LED (ID) LIGHT FITTINGS/002(Amdt.4)-2017 or latest. Make:Havells/Syska/Crompton/Bajaj | — | — | — | 10,357 | |
| — | 10.00 | — | — | ||
| Supply and fixing of 28W 1200mm BLDC Ceiling Fan, BEE 5 star rated with remote control and all connected accessories conforming to class 1 of IS:374/1979 with amdts 1 to 6 including labor charges. Make: Gorilla/Havells/ CG/Bajaj | — | — | — | 26,541.9 | |
| — | 10.00 | — | — | ||
| Supply and fixing of Ventilating Fans (Exhaust fan) of 4 pole 300 mm sweep size with metallic body with capacitor conforming to IS No.2312/67 (Reaffirmed 2005) complete with louver and all connected accessories. Make: Havells/CG/Bajaj/Khaitan | — | — | — | 24,255 | |
| — | 5.00 | — | — | ||
| Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 12 module duly erected flush to wall with required chiseling and finishing with cement mortar / POP as per required to match the back ground in an approved manner. Make:Legrand/Havells/GM | — | — | — | 2,581.4 | |
| — | 20.00 | — | — | ||
| Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 6 module duly erected flush to wall with required chiseling and finishing with cement mortar / POP as per required to match the back ground in an approved manner. Make: Legrand/Havells/GM | — | — | — | 6,514.2 | |
| — | 20.00 | — | — | ||
| Supply and erection of modular type 3 pin 6/16A multi socket with safety shutter ISI mark approved make duly erected on provided plate and box with wiring connections complete. Make:Legrand/Havells/GM | — | — | — | 3,626.6 | |
| — | 20.00 | — | — | ||
| Supply and erection of modular type switch 16A ISI mark approved make duly erected on provided plate and box with wiring connections complete. Make:Legrand/Havells/GM | — | — | — | 2,056 | |
| — | 30.00 | — | — | ||
| Supply and erection of modular type 5 pin 6A multi socket with safety shutter ISI mark approved make duly erected on provided plate and box with wiring connections complete. Make: Legrand/Havells/GM | — | — | — | 4,123.5 | |
| — | 70.00 | — | — | ||
| Supply and erection modular type switch 6/10A ISI mark approved make duly erectedon provided plate and box with wiring connections complete. Make:Legrand/Havells/ GM | — | — | — | 3,719.1 | |
| — | 50.00 | — | — | ||
| Wiring points: Provision for wiring with two runs of 1.5 sq mm 1100 V and one run of flexible copper conductor 1.5 sq mm 1100 V PVC insulated wires (phase, neutral and earth) in concealed PVC conduit pipe/casing and capping with 6A flush modular type switch control including 2-way switches where ever required, 3 pin ceiling rose and modular type plate cover to MS switch control box including all labor charges complete for fan points, light points, bell points, exhaust fans point etc. All the material used shall be of ISI approved make. | — | — | — | 25,006 | |
| — | 300.00 | — | — | ||
| Supplying & erecting mains with 2x4 sq mm and earth wire 2.5 sq mm FRLSH PVC copper wire in HMS PVC conduit min. 20mm dia, as per specification Make: Havells/Finolex/Polycab | — | — | — | 62,025 | |
| — | 200.00 | — | — | ||
| Supplying & erecting mains with 2x6 sq mm and earth wire 4 sq mm FRLSH PVC copper wire, in HMS PVC conduit min.20mm dia, as per specification. Make: Havells/Finolex/Polycab | — | — | — | 51,976 | |
| — | 5.00 | — | — | ||
| Supplying and erecting single pole and neutral distribution board (SPNDB), with 2 ways for incoming and 10 ways (10 poles) for outgoing SP MCBs, with door, 1.2mm thickness surface / flush mounted, IP 43 Protection on iron / GI frame as per specification no. SW-SWR/MCBDB Make:Legrand/Havells/L&T | — | — | — | 8,633.65 | |
| — | 15.00 | — | — | ||
| Supply, erection and marking DP MCB 16-32A, 10 kA B-series in provided distribution board as per specification No. SW-SWR/MCB Make: Legrand/Havells/ L&T | — | — | — | 8,177.4 | |
| — | 10.00 | — | — | ||
| Supply, erection and marking SP MCB 16-32A, 10 kA B-series in provided distribution board as per specification No. SW-SWR/MCB Make: Legrand /Havells/L&T | — | — | — | 2,044.4 | |
| — | 5.00 | — | — | ||
| Supply, erection and marking DP MCB 63A, 10 kA B-series in provided distribution board as per specification No. SW-SWR/MCBMake: Legrand/Havells/ L&T | — | — | — | 5,204.5 | |
| — | 3000.00 | — | — | ||
| Supply, laying, connecting, testing and commissioning of 2 core 70 mm² LT XLPE UG Aluminium Cable, 1100 Volts as per IS:7098/Pt.I/1988 or latest make: Polycab/KEI/Havells/Finecab/LS/Gloster | — | — | — | 6,24,510 | |
| — | 3000.00 | — | — | ||
| Supply and running of 8 SWG GI wire is to be laid for earth continuity. | — | — | — | 37,350 | |
| — | 900.00 | — | — | ||
| Excavation of cable trench 30 cm wide x 90 cm deep in all types of soils for HT/LTUG cable as per specification No.Y/E.cable laying/6/99 annexed. | — | — | — | 1,17,000 | |
| — | 500.00 | — | — | ||
| Cutting of esphated road/ concrete/ cement/under the track etc., and excavation of cable trench 30 cm wide x 90 cm deep road etc., for laying of HT/LT UG cable. After laying of cable the trench should be brought to its original position by providing tar/ concrete/ cement as per the site conditions and as per directions of Rly.Engineer. | — | — | — | 1,51,445 | |
| — | 40.00 | — | — | ||
| Supply of 100 mm dia 'B' class ERW GI pipe conforming to IS: 1239 Part 1 (2004) and fixing with suitable clamps on wall/building including laying of cable through GI pipe. | — | — | — | 45,713.2 | |
| — | 40.00 | — | — | ||
| Horizontal drilling of bores for laying of LT UG cables across the road/track | — | — | — | 82,005.2 | |
| — | 5.00 | — | — | ||
| Supply & erection of Automatic Change over Color Light Signaling Panel Capacity 60A For 10 KVA AT as per RDSO Spec no. TI/SPC/PSI/CLS/0020 with A&C slip 1 to 4 or latest. | — | — | — | 2,51,818.9 | |
| — | 5.00 | — | — | ||
| Supply, erection, testing and commissioning of 60 &150 CLS junction box as per the drawing No: 01/2022-4/2/AT, Dated: 11/03/2022 or latest. | — | — | — | 60,932.25 | |
| — | 5.00 | — | — | ||
| Supply, fixing and connecting and commissioning of Weather proof terminal box with Bi metallic bus bar with clamp bolts nuts including all accessories etc.(For 25KVA & 10KVA AT) As per DRG No:E.252/TrD/HQ/AT-JB/2022-23 (Alt-1) , Dated: 22/11/2023 or latest | — | — | — | 68,850 | |
| — | 5.00 | — | — | ||
| Supply, fixing and commissioning of 63A 4 pole MCCBs with 25 KA breaking capacity (for AT terminal box as per Dawing enclosed | — | — | — | 23,150.8 | |
| — | 5.00 | — | — | ||
| Supply and erection of earth electrode as per the enclosed specification. | — | — | — | 20,203.15 | |
| — | 3000.00 | — | — | ||
| Supply and laying of HDPE pipe of PE-80 grade in PN-4outer dia of HDPE pipe 110mm (nearest 4"" dia) and wall thickness minimum 4.1 mm maximum 4.3 mm with""T' joints, bends, elbows etc. including all other connected accessories. Make: M/s. Sudhakar/Nagarjuna polymer/Nandi/Plasto | — | — | — | 9,94,200 | |
| — | 5.00 | — | — | ||
| Supply of digital earth resistance tester with Resistance Range 0.010 to 1000 Ohms, Resolution: 0.01 - 1, Accuracy: ±(2%+3), Display: Extra Large Back lit LCD, Sampling Rate: 2.5per Sec conforming to specification attached. Make:Fluke/Rishab/Meco | — | — | — | 84,725 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
GCC2022works.pdf
ATTACHMENT
ACS1to10merged.pdf
ATTACHMENT
TENDER BOOKLET
ATTACHMENT
CLSPanelandATjunctionBox2.pdf CLS panel and AT junction box
ATTACHMENT
TB51202526IBSsignalsinPBN-MUEsection.pdf
ATTACHMENT
CLSPanelandATjunctionBox2.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .