Loading…
Loading…
| # | Company | Amount | Status |
|---|---|---|---|
| 1 | ₹1.1 LAWARDED | AWARDED |
Tender Value
₹1.6 L
EMD Value
₹3,400
Closing Date
2 Jul 2025, 10:30 pmClosed
Directorate of Municipal Administration
Installing highmast in park at Keerthinagara main road in ward no 02 of City Corporation Shivamogga
DMA/2025-26/EL/WORK_INDENT43109
DMA/2025-26/EL/WORK_INDENT43109
Open
Electrical
Electronic Documents, First(One Cover)
DMA City Corporation Shivamogga
₹500
₹3,400
25 Jun 2025
25 Jun 2025
28 Jun 2025
Installing highmast in park at Keerthinagara main road in ward no 02 of City Corporation Shivamogga
Fabricating, supplying and erection of . ms long hot dip Galvanized Octagonal hot dip Pole with BSEN 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate with door opening arrangements, ...
Supplying and Fixing 50mm clamps A GI pipe up to 4.5 ms. long with a reducing collar of 50x40mm to which, an extension of 250 mm pipe is fixed for 125 or 250/400 W MV/Sodium vapour street light fittin...
Fixing halogen/metal halide /SVL/IL/LED floodlight fitting over existing pole / wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires.
Supply of LED floodlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polyca...
1.1 kV, XLPE or Heat resistant PVC insulated, PVC extruded Inner Seath Armored LTUG Cable as per IS-1554 (Part- 1) or IS-7098 Part-1, Armoring strip thickness and resistivity as per IS-3975. 16 Sqmm, ...
Providing, laying and jointing HDPE pipes of specified grade andconforming to IS 4984-2016 with latest ammendments and conveyingto work site including loading and unloading at both destinations androl...
Fabricating supplying and mounting MS box made out SWG.suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped wit...
Supplying and fixing angle iron frame work fabricated out of M.S. angle iron. and M.S. Flat with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint.40 x 40...
Supply and fixing of 3pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per IS-13947. 25 A
Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...
Supplying and fixing Microprocessor based Electronic timer (without contactor, Din Mounting using necessary bolts, nuts and washers etc.,.).3-120sec setting.
Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for work...
Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such similar works in all kinds of soils, as per dra...
Providing and laying in position Ready Mixed or Batch Mixed concrete from ISO 9001 accredited plants as per IS 10262-2009 mix design procedure for Reinforced Cement Concrete works in all types of Stru...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
LT Single Phase 5-30 Amps, DLMS Complaint Static Energy Meter, 1.0 Accuracy Class (Used for LT-2, LT-3 & LT-5 Installations)
Supplying 4mm thick plastic sheet with necessary nitches for.fixing switches, regulators etc, and fixing on existing wooden or metal box using N.F. screws
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .