Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹32.5 LAccepted-AOC D 91 BLOCK D AMITY GREEN HASEMAU LUCKNOW PIN 226028 | LUCKNOW | LUCKNOW | UTTAR PRADESH | 226028 | L1 | Accepted-AOC being L1 | |
| 2 | L2₹43.3 L+₹10.7 L (33.0%)Rejected-Finance 0 SALEHPUR KOTLA BSR ROAD PO DAHANA HAPUR HAPUR UTTAR PRADESH 245101 | HAPUR | UTTAR PRADESH | 245101 | L2 | Rejected-Finance Not being l1 |
Tender Value
₹41.5 L
EMD Value
₹83,000
Closing Date
2 Oct 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE AF BAREILLY
HQ CWE AF BAREILLY -243002
PROVN OF PERIMETER ROAD FOR SECURITY PURPOSE IN DOMESTIC AREA AT AF STN BKT
2023_MES_610100_2
81378/E8
Open Tender
Civil Works
Item Rate
120 days
GE(AF) BKT
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
GE AF BKT
₹83,000
Yes
31 Oct 2023
6 Sept 2023
4 Oct 2023
6 Sept 2023
2 Oct 2023
14 Sept 2023
7 Sept 2023 - 11 Sept 2023
Amount
Surface excavation not exceeding 30 cms deep and averaging 15cms deep and getting out in any type of soil, complete all as specified.
Removing excavated material exc. 250m but not exc. 500m and depositing where directed at a level not exc. 1.5m above the starting point complete all as specified.
Rolling and consolidating formation surfaces in cutting / with power roller 8 to 12 tonne to required , level, gradient and cambe including filling in hollows & depressesion which occur during the process of rolling complete all as specified and directed.
M&L 150mm Soling (or sub base) with broken boulders or quarried stone ( size 100 to 50mm ) from approved quarries, inter stices filled, surface formed and rolled and consolidated to required gradient and camber for levelling complete all as specified and directed Engg-in-Charge.
M&L for 150mm thick WBM (in two layers of 75mm each Compacted thickness) with coarse aggregate 2 (40 mm to 63 mm size) of grainte, trap of basalt of grading or of grading 3(20mm to 50mm size) spread, rolled and consolidated to gradient and camber required with road roller of capacity 8 to 10 ton compl.te all as specified
M&L for preparation of unsurfaced WBM by brushing with wire brushes for removing caked mud etc, sweeping with broom and finally fanning the cleaned surface with gunny bags or with compressor air blower to remove all loose dirt etc and applying evenly a priming coat with paving bitumen VG 10 grade @10 Kg/10 Sqm by mechanical sprayer etc complete all as specified and as directed.
M&L Bituminous premixed semi dencse asphaltic 40 mm thick (consolidated thickness) with 5.5 % binder content by wt of total mix paving bitumen (VG-30) viscocity grade mixed in hot mix plant transported to site on tippers and laid with mechanical paver, and rolled to uniform smooth suface with 8 to 12 tonne capacity power roller and compacted to required camber and gradient and all directed and specified by Engineer-in-charge. Note :- (i)The mix design shall be got done from approved lab and got approved from GE/AGE(I) before commencement of work.
M&L for preparation of new bituminous/ concrete surface and painting lines , dashes, arrrows letters etc. on roads pavements by applying thermoplastic road marking paint conforming to IS 164-1981 ( first revision reaffirmed in 1986) ( 5kg/sqm) with glass beads potter (250gms) 2mm thick and 10 cm wide strips on bituminous road surface and road marking machine ) including complete removal of dust particles by wire brushes or sweeping with brooms complete all as specified and dircted by Engineer-in- Charge .
Excavating in trenches, n exc1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or in trenches for UG cable ,pipes etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft and loose soil, all as specified.
Excavating in trenches, n exc1.5 m wide and n exc 1.5 m in depth; for foundation for erecting pole, etc. or in trenches for UG cable ,pipes etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard and dense soil, all as specified.
Returning filling in including spreading, levelling, watering and well ramming in layers not exc.25cm thick each layer of soil all as specified.
Removing excavated material not exc. 50m and depositing where directed at a level not exc. 1.5m above the starting point complete all as specified.
Plain cement concrete 1:4:8 Type D-2, using 40mm graded mechanically crushed stone aggregate as in foundation, filling and mass concrete, as in poles all as specified.
Brick work with old size bricks having crushing strength not less than 75 Kg/Sqcm, straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6 (1 cement : 6 coarse sand), complete all as specified.
M&L for plain cement concrete 1:2:4 Type, B-1 using 20mm graded mechanically crushed stone aggregate as in height, copings to poles, kneelers, apex stones, bed plates, chamfered angles and throating, complete all as directed Note :- (i) The unit rate include for use of form work (straight or curved). (ii) Reinforcement if any shall be measured and paid separately.
M&L for reinforced cement concrete (design mix) M-25 ( using 20mm graded crushed stone aggregate) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified. Note : Reinforcement and form work shall be measured and paid separately
M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping)in rough finished surface of concrete complete all as specified.
M&L for formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but not exc 20cm wide for roughly finished flat surfaces of concrete, all as specified.
M&L for TMT bars 10mm dia and over,dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete, all as specified.
M&L for Plain cement concrete 1:3:6 type C-1 using 20 mm graded mechanically crushed stone aggregate as in surface channel and drains all as specified.
Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc., complete all as specified.
M&L for rendering 15 mm thick plaster on other than fair faces of brick/concrete surfaces in CM (1:4) on wall surface, finished even and smooth without using extra cement ,complete all as specified and directed.
M&L for preparing newly plastered surfaces of walling and applying three coats of white wash complete all as specified and directed.
M&L for Continuous brick edging; with width equal to the length of the brick; laid dry on edge vertically with burnt clay bricks of sub class 'B' complete all as specified and directed.
Dismantling of security street light steel tubular poles/GI Pipe of any size embedded in concrete upto bottom of foundation and transporting to store and stacking for re-use ,all as specified and directed complete.
Taking out LT UG cable of size16 Sqmm 4 core from any type of soil cable complete all as specified and directed.
Fixing only Steel tubular poles/ GI pipes ( approximate 9.0 metres long) complete with cast iron base plate, finial taper plug, bolts, nuts & screwscomplete all as specified and directed. By Eng-in-Charge. Note:- Excavation wil be measured separtly.
Supply and fixing Steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts & screws as specified type 410 SP-22 (9.0 metres long) with two coat of aluminium paint complete including preparation of old painted surfaces and including making blue / black colour paint strip of 15 cm width including wiring the pole Nos. complete all as specified and directed. Note:- Excavation wil be measured separtly.
XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross sectional area 16 Sqmm 4 core laid in trenches passing through pipe/ ducts/ surface of wall ceiling etc including testing after laying complete all as specified.
M&L for sub class 'B' bricks old size, as cable mechanical protection cover, laid dry, flat, transversally along the length of cable, on sand cushioning, with width equal to the length of the brick, complete all as specified and directed.
Reuse of old retrieved brick as laying only covering as mechanical protection to cables with well burnt sub class ‘B’ bricks all as directed.
Sand cushioning to under ground cables, 8 cm thick layer before laying and testing the cable and 15 cm thick after laying and testing of the cable in trenches complete all as specified in Clause 19.75 of MES SSR 2009 Part-I and directed by Engr-in-Charge.
M&L for twin core PVC insulated sheathed(heavy duty) unarmoured aluminium conductor cable (for phase and neutral) of size 2.50 Sqmm for connection drawing through pole or GI brackets of street light fittings with junction box complete all as directed.
Supply and fixing in replacement old unserveceable cable junction box with new pole mounted thermoplastic cable junction box for street light with IP-65 protection, weather proof with metric knockouts for cable entry for outdoor installation with front door opening system including terminals for one incoming and two outgoing cables of size 16/25 sqmm 4 core, one MCB SP 3 to 6 Amp 240V AC with mounting clamp of flat iron, nut, bolt and washers complete all as specified and directed .
M&L for mild steel galvanised light grade 50mm dia tubing with all fitting; laid in trenches, across road or on pole complete all as specified.
M&L for painting of existing street light steel tubular pole with two coat of aluminium paint complete including preparation of old painted surfaces and including making blue / black colour paint strip of 15 cm width including wiring the pole Nos. complete all as specified and directed.
Dismantling and refixing of LED street light fitting 35 watt 230 V complete all as specified and directed.
Dismantling and refixing of street light bracket, clamps, nuts and bolt complete all as specified and directed.
M/s A S Associates
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .