REPAIR TO JOINERY FLOORING PLASTERING PLUMBING SANITARY PERIODICAL WORK AND OTHER MISC BR WORKS IN MD ACCN OF COD UNDER AOR OF AGE BR I OF GE NORTH DELHI CANTT 10

Amount

Demolition of reinforced cement concrete reinforcement cut as required to facilatate demolition of any description and in any position not otherwise specially provided

Demolition of plain cement concrete unreinforced of any thickness of any description and in any position not specifically provided for complete all as specified and as directed.

M&L for non skid ceramic coloured tiles 7mm to 8mm thick joint free area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in floors over and including 15mm thick screed bed in cement mortar 1:6 set and jointed in neat cement slurry and pointed in coloured cement.including dismantling floor, hearth or wall tiling including cement mortar bedding but also backing, removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

All as per description of srl item No 3 above but in vertical surface as skirting, dado and risers to steps over and including 10mm thick rendering/backing coat in cement mortar 1:4 complete all as specified and as directed.

M&L for non skid ceramic coloured tiles 7mm to 8mm thick area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm as in floors over and including 15mm thick screed bed in cement mortar 1:6 set and jointed in neat cement slurry and pointed in coloured cement. including dismantling floor, hearth or wall tiling including cement mortar bedding but not backing, removing serviceable tiles to store and rubbish off the premises all as specified and directed.

M&L glazed ceramic coloured tiles in vertical surface area of each tile 0.07 to 0.15 sqm each set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including rendering 10mm thick in CM 1:4 and finished rough, complete including dismantling floor, hearth or wall tiling including cement mortar bedding but also backing, removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M&L for 75mm thick type-D-2 1:4:8 using 40mm graded crushed stone aggregate as in sub base to receive stone slab and pavement complete all as specified and as directed.

M&L 20mm to 25mm thick pre-polished machine cut kota stone slab as in flooring over and including 15mm thick screed bed in cement mortar 1:6, laid over cement slurry @ 3 Kg/Sqm and jointed with grey cement slurry mixed with pigment to match with shade of slab including molding the edge of slab complete all as specified and as directed. Note:- The size of Kota stone slab shall not less than 550mm x 550mm cut size in flooring and full length single piece in steps, except the location where the balance portion remain less than size as specified above.

M&L 20mm to 25mm thick pre-polished machine cut Kota stone slab as in riser or vertical surface over and including 10mm thick rendering in cement mortar 1:4, and jointed with grey cement slurry mixed with pigment to match with shade of slab including molding the edge where complete all as specified and as directed. Note:- The size of kota stone slab shall not less than 550mm x 550mm cut size as in flooring and full length single piece in steps, except the location where the balance portion remain less than size as specified above.

M&L for old size brick work with fly ash bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 including demolition of brick work complete all as specified and as directed.

Taking down existing cement plaster or complete removal of existing pointing and finishes including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

M&L 15mm thick ready mix plaster make ultratech readiplast/ birla aerocon RMP/ ACC suraksha RMP on brick work on concrete surface of wall internal surfaces finished even and smooth all as specified and directed by GE.

M&L 15mm thick ready mix plaster make ultratech readiplast/ birla aerocon RMP/ ACC suraksha RMP on brick work on concrete surface of wall external surfaces finished even and smooth all as specified and directed by GE.

M&L 5mm thick ready mix plaster make ultratech readiplast/ birla aerocon RMP/ ACC suraksha RMP on ceilling surfaces finished even and smooth all as specified and directed by GE.

M&L for preparing new plastered or unplastered surfaces of ceiling and applying three coats of white wash complete all as specified and as directed.

M&L for Preparing old decorated plastered surfaces of ceiling and applying two coats of white wash complete all as specified and as directed.

M&L for preparing new plastered surfaces of wall and applying two coats of oil bound distemper white or tinted over and including a coat of 2mm wall care putty and chalk whiting on plastered surfaces preparatory to distempering complete all as specified and as directed.

Complete removal of existing treatment & levelling of wall surface using mechanical / electrical operated sanding / scraping machine within-built vaccum suction system to suck the existing treatment as retrieved by scrapping/sanding etc . complete all as specified and directed.

M&L for applying 3mm thick water proofing wall care putty including washing, rubbing and cleaning after executing of ser item No 18 above complete all as specified and directed. Note : Washing to be carried out using high pressure washer machine to make the wall surface dust free before applying wall care putty.

M&L for two coats of oil bound distemper over prepared surface of wall using auto roller and airless paint sprayer complete all as specified and dircted.

M&L for complete removal of existing treatment and preparing old decorated surfaces of wall and applying two coats of oil bound distemper over a coat of 1mm wall care putty complete all as specified and as directed.

M&L for preparation of new plastered surfaces of wall and applying two coat of cement based paint over a coat of cement primer complete all as specified and as directed.

M&L for complete removal of existing treatment of wall including cornices etc by washing, rubbing down and stopping holes, and applying two coats of cement base paint over one coat of primer of approved shade complete all as specified and directed.

Complete removal of exteranal existing treatment & levelling of wall surface using mechanical / electrical operated sanding / scraping machine within built vaccum suction system to suck the existing treatment as retrieved by scrapping/sanding etc complete all as specified and directed.

M&L for writing letters or figures block, roman, Italic or Indian n exc. 30 cm height on existing surface complete all as specified and as directed.

M&L for two coats of cement base paint over prepared surface of wall using auto-roller and airless paint sprayer complete all as specified and dircted.

Dismantling wrought iron or mild steel work of any description not other wise provided complete all as specified and as directed.

S&F steel water tubes, medium grade, ISI marked, galvanised, 15mm bore with all fittings, fixed to walls and ceiling or laid in floors including taking up or down steel tubing and connections complete all as specified and as directed.

S&F steel water tubes, medium grade, ISI marked, galvanised, 20mm bore with all fittings, fixed to walls and ceiling or laid in floors including taking up or down steel tubing and connections complete all as specified and as directed.

Refixing only old 15mm dia bore steel water tubing & connection in new or old position fixed to wall, ceiling or laid in floors including necessary cutting & making of new threads for fixing of new fittings such as elbows, tees, sockets, union, reducer, etc as required including taking up or down steel tubing and connections complete all as specified and as directed. .

Refixing only old 20mm dia bore steel water tubing & connection in new or old position fixed to wall, ceiling or laid in floors including necessary cutting & making of new threads for fixing of new fittings such as elbows, tees, sockets, union, reducer, etc as required including taking up or down steel tubing and connections complete.

Cutting chases in brick walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, shelves, lintels, etc, and cutting chases for concealed water tubings or conduit wiring, etc and making good, cutting not exceeding 10cm girth complete all as specified and as directed.

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls/floor 75mm bore including demolition/taking down PVC/CI drain/rain water pipe complete all as specified and as directed.

S&F in repair health faucet (ABS body) mild steel chromium plated suitable for 15mm dia pipe with 1.50 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified

S&F in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass self 12cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and as directed.

S&F in repair 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement concrete 1:2:4 type B-1 using 20mm graded crushed stone aggregate mix with WPC complete all as specified and as directed.

S&F in repair bib taps cast copper alloy chromium plated with crutch or butterfly handle, fancy type, screwed down, screwed for iron pipe or for brass ferrule 15mm bore complete all as specified and as directed.

S&F in repair brass CP mixer/wall mixer for mixing hot & cold water screwed down high pressure, with long screwed shanks and fly nuts, screwed for iron pipe 15mm bore including connection pipe and fittings complete all as specified and as directed.

S&F in repair 10 litre capacity PVC low level flushing cistern with dual flush type white with inlet, float valve including bracket with 32mm dia PVC waste/flush bend pipe appx 600mm long complete all as specified and as directed.

S&F in repair PVC connection 600mm long and 15mm dia with brass fly nut at both ends complete all as specified and as directed.

S&F in repair vitreous china squatting pan, ‘Orissa’ pattern, of size 580mm x 440mm white with integral foot rest complete including trap and plain cement concrete bedding, outgoing flushing pipe, anti syphonage pipe etc complete all as specified and as directed.

S&F in repair chromium plated brass angle valve concelled type for 15mm bore pipe, fixed in repairs complete all as specified and directed.

Taking down chowkhats or frames n.exc 1.50 sqm with shutters without taking off shutters from the frames complete all as specified and as directed.

Taking down chowkhats of frames exc 1.50 sqm but n. exc 4.0 sqm with shutters without taking off shutters from the frames complete all as specified and as directed.

Taking down door shutters of any description exc 1 sqm & n.exc 2 sqm each complete all as specified and directed

S&F factory made single extruded WPC (wood polymer composite) solid door/ window/ceosetory windows & other frames/ chowkhat of size 45mm x 70mm comprising of virgin PVC polymer of K value 58-60 suspension grade, calcium carbonate and natural fibres wood powder/ rice husk/ wheat husk and non toxic additives maximum toxicity index of 12 for 100 gms fabricated with meter joints after applying PVC solvent cement and screwed with full body threaded star headed stainless steel screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N face & 1100 N edge, minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/stainless steel dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. M.S. hold fast/ lugs or stainless steel dash fasteners shall be paid for separately. Note:- For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

S&F for providing and fixing factory made single extruded WPC (wood polymer composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 suspension grade, calcium carbonate and natural fibres wood powder/ rice husk/wheat husk and non toxic additives maximum toxicity index of 12 for 100 gms having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N face & 900 N edge, minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk stainless steel screws, all as per direction of Engineer In- Charge. Note:- stainless steel butt hinges and necessary stainless steel screws shall be paid separately complete all as specified and directed.

S&F factory made double rebated extruded WPC (wood polymer composite) solid door/window/ceosetory windows & other frames/ chowkat of size 65mm x 125mm comprising of virgin PVC polymer of K value 50-60 suspension grade, calcium carbonate and natural fibers wood powder/ rice husk/ wheat husk and non toxic additives max toxicityindex of 12 for 100 gms fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed stainless steel screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N face & 1100 N edge, min compressive strength of 58N/sqmm and resistance to flame of class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed with MS holdfast/ lugs/stainless steel dash fasteners of required dia and length complete as per direction of Engr in charge. Note:- For WPC solid door/windows frames, minus 5mm tolerance in dimension i.e depth and width of profile dimension on plus side shall be acceptable but no extra payment on this account shall be made

Providing 30mm thick factory-made wire mesh solid WPC door shutter consisting of density 650 Kg /cbm manufactured by an ISO-9001-2015 certified company, door to be panneled with stainless steel mosquito Mesh and XTN aluminium mesh for additional strength and safety purpose. Conforming as per IS:4020. The door should be water proof, termite proof, fire retardant and having screw holding capacity. door to be fixed to frame with 3 nos. stainless steel butt hinges size 100mm*25mm*2mm and 32mm long steel screws drilled suitable to pass through other hardwares should be fixed with 19*6mm size steel screws etc. complete as per direction of Engineer-in-charge, manufacturer's specification & drawings. Note:- Fixture/fittings shall be measured & paid under relevant item except meshes.

S&F aluminium window as per TD drg No. CEDZ/TD-316 with following specifications :- (i) Outer frame of size 40mm x 114mm with 1.3mm thickness, corner 45 degree cut & aluminium welded. (ii) Center mullion of size 40mm x 65mm. (iii) Welded shutter 02 Nos of size 40mm x 60mm x 1.3mm thickness 45 degree cut mechanically joint with 6mm allen key bolt clamp with 5mm clear glass both side EPDM rubber gasket metal body hand lever type single point lock, aluminium kobra hinges 2 Nos per shutter. (iv) 12mm stainless steel 202 grade round bar safety grill at 100mm cc distance modified to 150mm cc distance in front of handle, welded at both ends with 6mm stainless steel 202 grade round bar. (v) Welded wiremesh shutter 2 Nos of size 40mm x 18mm x 1.3mm thickness 45 degree cut with 0.45mm nominal dia of stainless steel wire mesh, stainless steel 75mm long hinges & PVC magnet. (vi) Entire window shall be powder coated with pure polyster coat of any shade as approved by GE. (vii) Window shall be installed with silicone complete all as specified and directed.

S&F aluminium window as per TD drg No. CEDZ/TD-316 with following specifications :- (i) Outer frame of size 40mm x 114mm with 1.3mm thickness, corner 45 degree cut & aluminium welded. (ii) Center mullion of size 40mm x 65mm. (iii) Welded shutter 02 Nos of size 40mm x 60mm x 1.3mm thickness 45 degree cut mechanically joint with 6mm allen key bolt clamp with 5mm clear glass both side EPDM rubber gasket metal body hand lever type single point lock, aluminium kobra hinges 2 Nos per shutter. (iv) 12mm stainless steel 202 grade round bar safety grill at 100mm cc distance modified to 150mm cc distance in front of handle, welded at both ends with 6mm stainless steel 202 grade round bar. (v) Welded wiremesh shutter 2 Nos of size 40mm x 18mm x 1.3mm thickness 45 degree cut with 0.45mm nominal dia of stainless steel wire mesh, stainless steel 75mm long hinges & PVC magnet. (vi) Entire window shall be powder coated with pure polyster coat of any shade as approved by GE. (vii) Window shall have provision for installation of window AC/desert cooler and provision of window glass shutter, wiremesh, grill and necessary fittings and locking arrangements for subject portion will be modified as per ground requirement during the execution as per directions of Engr-in-charge. (viii) Window shall be installed with silicone complete all as specified and directed by Engr-in-charge.

S&F flush shutters 30mm thick, solid core construction, with block board core and ply wood face panels, commercial type on both sides with leaping and beading complete all as specified & directed.

Mild steel conforming to Fe 410-0 or Fe 310-0 in framed work such as grills, gratings, door frame etc with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars, ladders, railings and similar work complete all as specified & directed.

S&F mild steel, plain, black sheet of 1.60mm thick in wall cladding steel gates and similar work, cut to size, holes punched, including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams, including bending or turning up mitred angles etc as required complete all as specified & directed.

Taking down/dismantling old particle board or any board kitchen cabinet with wardrobe including fillets and making good disturbed surfaces all assessary complete all as specified & directed.

S&F factory made 18mm thick 100% solid WPC (wood polymer composite) plain board of required size comprising of virgin PVC resin of K value 57-60 suspension grade, calcium carbonate and natural fibers wood powders/ rice husk/ wheat husk and Non toxic additives, made froms extrusion process WPC foam sheet single extruded inner with density not less than 650 kg/cum certified company, having good screw holding capacity screw withdrawal strength of 2000 N face & 1100 N edge, minimum compressive strength of 50 N/mm2, modulus of elasticity 850N/mm2 and resistance of spread of flame of class A category with property of being termite/ borer free. water/ moisture proof,fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk stainless steel screws. All as per direction of Engineer -In-Charge, material test certificate and authentication should be compulsory provided by the manufacturing company: For WC/bathroom/toilet/kitchen & cabinets.”

S&F factory made 18mm thick 100% solid WPC (wood polymer composite ) laminated board of required size comprising of virgin PVC resin of K value 57-60 suspension grade, calcium carbonate and natural fibers wood powders/ rice husk/ wheat husk and Non toxic additives, made from extrusion process WPC foam sheet. single extruded inner with having minimum density not less than 650 kg/cum having good screw holding capacity screw withdrawal strength of 2000 N face & 1100 N edge, minimum compressive strength of 50 N/mm2, modulus of elasticity 850N/mm2 and resistance of spread of flame of class A category with property of being termite/ borer free. water/ moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted on both faces of shutter and fixing stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk stainless steel screws. All as per direction of Engineer -In-Charge, material test certificate and authentication should be compulsory provided by the manufacturing company: For WC/Bathroom/toilet/kitchen and cabinets.

S&F magnetic catches with steel body ‘H’ type, fixed to shutter complete all as specified & directed.

S&F continuous piano hinges of width 30mm when open flap, mild steel, bright finish or electrogalvanised complete all as specified & directed.

S&F 100mm long aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified & directed.

S&F 4 levers brass cupboard locks grade-I, size 65 mmcomplete all as specified & directed.

S&F 150mm long aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified & directed.

S&F 200mm long aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified & directed.

S&F butt hinges, 100mm size medium weight, cold rolled mild steel complete all as specified & directed.

S&F aluminium handles 150mm size cast type, anodised complete all as specified & directed.

S&F 300mm aluminium alloy, anodised sliding door bolt with hasp, staple bolt type and fixing clips of sheet, cast of extruded sections and fixing bolts and sliding bolts of extruded sec or cast aluminium and fixed complete all as specified & directed.

S&F stainless steel cromium plated tubing of 25mm dia curtain rod fancy type including fancy type CP brabs brackets wall to wall or flush to wall with finials or end caps decorative type as approved by GE for securing to curtain rod to wall in position, fixed in repair complete all as specified & directed.

M&L applying two coats of synthetic enamel paint on new wooden surfaces of any description over 10cm width or girth over a coat of pink primer including preparation of surfaces complete all as specified & directed.

M&L applying two coats of synthetic enamel paint on new steel surfaces of any description over 10cm width or girth over a coat of red oxide primer including preparation of steel surfaces complete all as specified & directed.

M&L for two coats of synthetic enamel paint on old steel painted surfaces including preparation of surfaces of any description not otherwise descriped over 10cm width or grith complete all as specified and directed.

M&L for two coats of synthetic enamel paint on old wooden painted surfaces including preparation of surfaces of any description not otherwise descriped over 10cm width or grith complete all as specified and directed.

Taking down brick tiles, terracing tiles, single layer from roof laid, bedded and pointed in any mortar complete all as specified & directed.

Demolition of cement concrete mud phuska of any description and in any position not specifically provided for complete all as specified and as directed.

M&L PCC 1:2:4 type B-0 padding on roof as in leveling to making slope, surface finished even and smooth without using extra cement complete all as specified & directed.

APP modified roof treatment over existing accessible RCC roof slab / chajjah / canopy / parapet wall to be executed through approved applicator of the membrane manufacturer with following specification etc complete all as specified and directed :- (a) removing and Cleaning existing damaged APP membrane from roof surface and clean all cement mortar and vegitation, plants with roots properly. (b) Applying oil bound bitumen primer @ 0.40 Kg/Sqm over 10mm thick plastering in CM (1:4) with WPC @ 3% by weight of the cement. (c) Apply a coat of hot bitumen 85/25 grade @ 1.60 kg/sqm. (c) Apply standard quality APP modified polymeric memrane minimum 3mm thick over the bitumen coat joints to be touched hot and width of overlaps shall e 75mm length wise and 100mm widthwise of the membrane. (d) APP membrane shall be laid using butane torch by Torch application with minimum 10cm side overlap and 15cm end lap. (e) Top of membrane shall be provide with solar reflective bituminous aluminum paint @ 0.1 Kg/Sqm as prescribed by manufacture of membrane.

Dismantling of floor of size not exceeding 1.50 sqm mtr for water closet/bath and removing out the cinder/concrete from sunken portion, grinding any sharp edges etc all as specified and directed with following: (a) Cleaning of RCC surface to remove dust, loose particle etc with compressed air or any other particles or any other suitable techniques on site conditions etc. (b) M&L for a glass fibre reinforced acrylic modified cementitious coating system with base coat of sika top & seal-107 @ 1.50 Kg/sqm glass fibre reinforcement Sika® Fab-I and top coat with sika top® Seal-107 @ 1.50 Kg/sqm or equivalent of fosroc or pidilite. (c) M&L for protection plaster 15mm thick on cement mortar 1:3 admixed with appropriate integral water proofing compound with sika plastocrete plus as specified. (d) M&L for providing 40mm dia GI pipe spout projecting at least 150mm beyond outer face of wall. (e) M&L for sunken portion filled with 40mm graded brick bats and finished with 50mm thick PCC 1:2:4 type B1 all as specified and directed. (f) The area of each WC portion is n.exc 1.50 sqm each. (g) Cost of the above aspect shall be deemed to be included in the quoted rates of the respective item and nothing extra shall be paid on this account. (h) 72 hrs ponding test shall be carried out for sunken treatment before payment.

M&L for plain cement concrete 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in string courses copings or as floors complete all as specified & directed.

M&L for preparation of new or old plastered surfaces of wall and applying two or more coat of 100% premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS 15489: 2004, alkali & fungal resistance, dirt resistance exterior paint of required shade company depot tinted with silicon additives @ 1.43 litre/10 sm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over new surface complete all as specified & directed.

M&L for 15mm thick cement plaster on surfaces of concrete in CM 1:4 on roof surfaces over PCC padding mixed with WPC @ 200 ml @ 50 Kg of cement complete all as specified and dierected. Note:- WPC shall be measured and paid separately

Supply only liquid water proofing compound complete all as specified & directed.

Rohan Construction Company (BID ID -3385678)

RUHI ASSOCIATES (BID ID -3384537)

DEEP ASSOCIATES (BID ID -3385688)

The new hut furnitures (BID ID -3385014)

V M CONSTRUCTION (BID ID -3385811)

friends associeates (BID ID -3385637)