Certain repair to tiling, joinery, brick work and certain allied works in old project area at AF Stn Nal under GE (AF) Nal

Amount

Dismantling plain or corrugated steel sheeting any guage/ thickness incl Nainital pattern or similar pattren roof covering in patches complete all as specified & directed.

Demoition of brick work built in cement mortar complete all as specified & directed.

Taking down cement plaster on brick or stone walls/ceiling etc including racking out joints, hacking for key, scrubbing down with water etc, complete all as specified & directed. Note :- The demolished material should be disposed off outside MoD land. The contractor shall quote his rates considering the above element, no extra payment shall be made on this account.

Dismantling timber scantling 40 sq cm and over in section in any position complete all as specified and directed.

All as per description of serial Item no. 4.00 but unframed work.

Dismantling Structural mild steel work of any description not otherwise provided for complete all as specified and directed.

Demolition of cement concrete (un- reinforced) in ground floor and paving n. exc 15 cm thick bleow or above ground level complete all as specified. Note:- The demolished material should be disposed off out side the MOD land. The contractor shall quote his rates considering this above factor.

Demolition of lime / cement concrete of roofs floor of any description and in any position not otherwise specially provided complete all as specified. Note:- The demolished material should be disposed off out side the MOD land. The contractor shall quote his rates considering this above factor.

Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing) and rubbish off the premises complete all as specified. Note:- The demolished material should be disposed off out side the MOD land. The contractor shall quote his rates considering the above element

Taking down chowkats or frames exc 1.5 sqm but n exc 4.0 sqm with out taking off shutter from the frames complete all as specified and directed.

Taking down door /window frame with shutter n exc 1.5 sqm each (with out taking off shutter from the frames) complete all as specified and directed.

Taking down shutter of any description exc 1 sqm but n exc 2 sqm each complete all as specified and directed.

Dismantling of wall / ceiling boards / cabinet boarding (fibre, PVC, Pulp, insulation etc) of any description , any thickness incl frame / grid, fillets, fitting work etc complete all as specified and directed.

S&F pre-painted galvalume Aluminium zinc coating GI based corrugated or semi-corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall fixed with self taping screws complete all as specified and directed.

S&F Solid PVC wall lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications complete all as specified and directed.

M&L 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to make PVC Frame as per specification complete all as specified and directed.

Material & labour for preparation of old painted steel surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint (1st quality) as in camouflaging pattern complete all as specified & directed.

M&L brick work with sub class 'B' bricks of class designation 7.5 all as per IS-1077-1992 (minimum compressive strength of brick 75 kg/Sqcm) old size bricks, straight or curved on plan exceeding 6 mtr mean radius built in CM 1:6, complete all as specified & directed.

All as per serial item No. 18 here in before but except bricks. (Old serviceable bricks retrived by dismantling existing brick work vide item No. 02 here in before shall be re-used).

Material and labour 15 mm thick rendering on fair faces of brick work or concrete surface of walls CM 1:4 to be finished even and smooth without using extra cement complete all as specified and directed.

Material and labour 10mm thick rendering on concrete surface in cm 1:3 as in ceiling surface to be finished even and smooth without using extra cement complete all as specified and directed.

M&L for steel work as in main and cross beams, hip, jack, rafters , purlins, posts , as in parking shed fixed with angle cleats or other connecting plates etc complete.

M & L preparation of new steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Supply and fixing MS work as in wind tie , rain water pipe clamp, hold fast, gutter supports etc confirming to Fe 410-0 complete all as specified and directed.

S&F coloured Polycarbonate Sheet 2 layer 10 mm thick sheeting fixed with top profile alluminium , end alluminium profiles fastners , EPDM rubber Gasket , butyl tapes , suitable screws , silicon sealant , SD screws fastners in roof, wall including dismenteling of old sheeting etc colour as approved by GE complete all as specified and directed. Note : - The cost top profile alluminium , end alluminium profiles fastners , EPDM rubber Gasket , butyl tapes , suitable screws , silicon sealant , SD screws fastners are inclusive in the quoted rates , the contractor shal kept this factor in mind before quoting their rates .

S&F coloured Polycarbonate Sheet ( diamond texture 02 mm thick) sheeting fixed with top profile alluminium , end alluminium profiles fastners , EPDM rubber Gasket , butyl tapes , suitable screws , silicon sealant , SD screws fastners in roof, wall including dismenteling of old sheeting etc colour as approved by GE complete all as specified and directed. Note : - The cost top profile alluminium , end alluminium profiles fastners , EPDM rubber Gasket , butyl tapes , suitable screws , silicon sealant , SD screws fastners are inclusive in the quoted rates , the contractor shal kept this factor in mind before quoting their rates .

M&L for providing 15 mm x 15 mm size stainless steel (grade SS 304 ) Tee strips of thickness 1.5 to 1.9 mm in existing granite wall cladding / flooring by cutting , grooving and fixing with suitable adhesive and making good existing surface complete all as specified and directed.

M& Lfor PCC type B-1 (1:2:4) using 20mm graded crushed stone aggregate as in seismic and other similar bands, shelves, copings, bed plates, hold fasts, plinth courses, filling in presserd steel frame and the like finished fair and even incl necessary form work complete all as specified & directed.

Cutting holes in brick walls built in cement mortar , superficial area n.exc 150 Sqcm incl making good in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required complete all as specified and directed.

All as per item No 29 above but cutting in superficial area exceeding 150 Sqcm but not exceeding 400 Sqcm.

Taking down aluminium shutter / sliding doors for necessary repair work and re-fixing in position after adjusting or replacing defective members of rails or styles in position with replacement of steel screw re threading and fixing on existing devices, resetting or replacing top pivots bottom steel plates etc and resetting or replacing glazing etc for proper function of aluminium door of size n exc 1.5 sqm each complete all as specified and directed. Note:- Aluminium section, glazing and top pivots shall be measured and paid seperately.

Taking down aluminium shutter /sliding doors with for necessary repair work and re-fixing in position after adjusting or replacing defective members of rails or styles in position with replacement of steel screw re threading and fixing on existing devices, resetting or replacing top pivots bottom steel plates etc and resetting or replacing glazing etc for proper function of aluminium door of size exc 1.5 sqm to 3.0 sqm each complete all as specified. Note:- Aluminium section, glazing and top pivots shall be measured and paid seperately.

Supply only powder coated aluminum section as in rail, stiles, frame etc complete all as specified and directed.

Supply only top pivots of casting body suitable for aluminum door complete all as specified and directed.

Supply only aluminium grill 6-8mm thick fixed to aluminium frame work with suitable size of aluminium section & fastners as in repair complete all as specified and directed.

Supply only mild steel mortice lock vertical type 100mm, 4 levers all as specified and directed.

Supply only double action floor door spring hydraulically regulated made up minimum 1.25 thick aluminium alloy sheet foundation box, man body stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and directed.

Supply only door closure Aluminium Extruded section hydraulically regulated designation No 03 universal type , suitable for door shutter of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.

Supply only 4.80 mm thick sheet glass of ordinary quality and glazing with rubber beads, clips etc complete all as specified and directed.

S&F of ordinary glass 3mm thick with oil putty in square n exc 0.50 sq in each pane including hacking out of old broken glass complete all as specified and directed.

Dismantling of water tanks of capacity exc 250 & n. exc 500 litres of any description complete all as specified and directed.

S&F 20mm PTMT nipple suitable for HDPE water tank (minimum weight 20mm-45gms) complete all as specified and directed.

S&F 25 mm ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe complete all as specified and directed.

S&F 500 litre capacity Rotational moulded polyethylene water storage tank, white colour, triple layers, conforming to IS, cylindrical vertical with closed top, hoisted and fixed in position complete all as specified and as directed.

Taking up or down 15 mm bore steel tubing & connections complete all as specified and directed.

All as per description of serial Item No. 45.00 here in before but 20mm bore tubes.

S & F 15mm bore of tube medium grade galvanized with all fittings & fixed complete to walls & ceiling or laid in floors complete all as specified and directed.

All as per description of serial Item no. 47.00 here in before but 20mm bore tubes.

M&L for 75 mm thick PCC 1:4:8 type D-2 (using 40mm graded aggregate) as in sub bases of floor, complete all as specified and directed.

M & L 75 mm thick PCC 1:2:4 type B-2 (using 40 mm graded stone aggregate) as in floor complete all as specified and directed.

M&L PCC 25 mm thick 1:2:4 type B-0, (using 20mm graded stone aggregate) as in floors & finishing the surface even & smooth using extra cement complete all as specified and directed.

M & L 40 mm thick PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in floor and sub bases for filling undulation under floor tiles or other similar work complete all as specified and directed.

S&F glass dividing strips 3 mm thick and 38 mm wide inserted in position conform to design complete all as specified and directed.

M&L for non skid digital coloured ceramic jointless tiles 7 to 8mm thick (squared or rectangular ) area of each exc 0.11 sqm but not exc 0.18 sqm as in floor set and jointed in neat cement slurry and pointed in coloured cement to match, over and including 15mm thick screed bed in cement mortar (1:6) complete all as specified and dirrected.

M&L for non skid digital coloured ceramic jointless tiles 7 to 8mm thick (squared or rectangular ) area of each exc 0.11 sqm but not exc 0.18 sqm as in skirtings , set and jointed in neat cement slurry and pointed in coloured cement to match, over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed.

M&L for non skid coloured ceramic jointless tiles 7 to 8mm thick (squared or rectangular ) area of each exc 0.11 sqm but not exc 0.18 sqm as in floor set and jointed in neat cement slurry and pointed in coloured cement to match, over and including 15mm thick screed bed in cement mortar (1:6) complete all as specified and directed.

M&L for non skid coloured ceramic jointless tiles 7 to 8mm thick (squared or rectangular ) area of each exc 0.11 sqm but not exc 0.18 sqm as in skirtings , set and jointed in neat cement slurry and pointed in coloured cement to match, over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed.

M&L for vitrified ceramic coloured tiles 9 to 10mm thick of size 600mmx600mm as in floors etc set and jointed neat cement slurry and pointed in white or coloured cement to match over 20mm thick screed bed in (CM 1:6) coloured and shade as approved by GE complete all as specified and directed.

M&L for vitrified ceramic coloured tiles 9 to 10mm thick as in skirting height 10 to 15 cm set & jointed in neat cement slurry and pointed in white or coloured cement to match over a backing plaster 10mm thick in CM (1:4) coloured and shade as approved by GE all as specified and directed.

Demolition of stone slabs of any description or thickness in roof, floors ,suspended slabs ,chajjas etc,laid bedded and pointed in any mortar complete all as specified and directed.

M&L for granite stone slab 20mm thick as in kitchen plateform / flooring/ wash basin counters laid over and including 20 mm thick screed bed in cement mortar 1 :6 and jointed and pointed with cement mixed with pigment to match the shade of stone including cutting opening ( of any shape and size ) , cutting,rubbing and polishing surface and rounding of edges and as any colour as approved by GE completed all as specified and directed.

M&L for granite stone slab 20mm thick as in vertical surfaces over a 10 mm thick rendering with cement mortar 1:4 and jointed and pointed with cement mixed with pigment to match the shade of stone including cutting rubbing and polishing surface and rounding of edges and as any colour as approved by GE completed all as specified and directed.

M&L for coloured chequered cement concrete tiles 25cmx25cmx25mm thick machine pressed set ,jointed and pointed in neat cement slurry and pointed with mixture of grey cement and white cement in equal proportion with pigment in floors over and including a 20mm thick screed bed in (CM 1:4) complete all as specified and directed.

M&L non skid coloured cermaic high traffic tiles 300 mmx300 mm x10 mm thick confirming to IS 4457 : 2007 in floor set and jointed in neat cement slurry and pointed in coloured cement to match, over and including 15mm thick screed bed in cement mortar (1:6) complete all as specified and directed.

M&L 75 mm thick PCC (1:3:6) type C-2, using 40mm graded stone aggregate as in plinth protection laid in bays and surfaces finished even & fair,including filling the joints with bitumen 85/25 grade complete all as specified & directed.

S&F as in repairs 15 mm bore stop cock , long body cast copper alloy,high pressure chromium plated with wall flange , screwed down both side for iron pipe or for unions complete all as specified & directed.

S&F in repairs Health faucet with 1.5 m flexible chromium plated tube and hook fixed to angle valve etc complete all as specified and directed.

S&F in repairs 15mm CP bib taps long body fency type with wall flange cap screwed down screwed for iron pipe and fixed complete all as specified and directed.

S&F in repair 15mm bore Pillar tap cast copper alloy with chromium plated fancy type screwed shanks and fly nuts screwed for iron pipe complete all as specified and directed.

S&F in repair 450 mm long PVC connection 15 mm bore with chrome plated brass nuts complete all as specified and directed.

S&F as in repair 10 Ltr capacity PVC valveless syphonic action type flushing cistern low level white with including inlet ball valve and brackets, float and handle, L-Bend complete all as specified and directed. Note:- Cost of fixing new flush pipe is included in the unit rate of this item.

Supply only flush pipe of polyethylene of low or high density of PVC 32mm dia for low level cistern including all joints complete all as specified and directed.

S & F pressed steel frames of size 125x60mm for doors with one or more rebates including necessary fixing,lungs,hinges,lock strike plate, etc complete all as specified and directed.

S & F Factory made 35 mm thick 2nd class hard wood plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and as directed.

M&L Factory Made 35mm thick 2nd class hard wood glazed & gauged skeleton shutters open rebated and prepared to received glass/gauge etc ( without sash bars) edges of framing plains chamfered or rounded fitted with cut and mitered bead for securing glass etc complete all as specified and directed. Note :- Wire mesh and glazing shall be measured and paid separatly in respected items.

Supplying & fixing solid PVC door frames of sizes 50mm x 47mm made out of 5mm single side prelam PVC sheet used instead of plain colour PVC sheet & edges will be painted to match with prelam sheet reinforced with MS Square tube complete all specified and as directed.

S & F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top and bottom rails. M.S. frame shall be covered with heat moulded prelam PVC "C" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and prelam colour PVC sheets for top rail , lock rail and bottom rail on either side and as gap insert for top rail and bottom rail , both side prelam PVC sheet used insted of plain colour PVC sheet. Stile and rail feathered at edges paneling of prelam solid sheets 10 mm thick to be fitted in the MS framewelded, sealed to the stiles and rails with suitable PVC sheet beading , and jointed together with solvent cement complete all as specified in SSR Part -II.

Supply and fixing 150mm long aluminium anodised barrel tower bolt, extruded section,fixed with stainless steel screws complete all as specified and directed.

S&F 300mm long mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed.

Supply and fixing Mild steel butt hinges medium weight, cold rolled, 100mm, ISI marked, fixed with stainless steel screws complete all as specified and directed.

S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks, cut nails, stainless steel wire stapel or with wooden beading all as specified.

Cutting holes in brick walls built in cement mortar for inserting hold fasts and making good dismantled portion in cement concrete 1:2:4 type B-1 as required depth of embedded portion exc half brick but not exceeding one brick complete all as specified and directed.

Material and labour for preparation of new wooden surface surfaces of any description not other describe over 10cm width or girth and applying two coat of synthetic enamel paint complete all as specified and directed.

Material and labour for preparation of old wooden surface surfaces of any description not other describe over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

S&F mild steel 300mm, ordinary rat tail rod pattern springs, including roller and roller plate complete all as specified and directed.

Supply and fixing 100 mm size extruded aluminium alloy handels fabricated type, anodised fixed with stainless steel screws complete all as specified and directed.

S & F door stopper of brass body and tongue with hard drawn steel spring with 150 mm cover plate complete all as specified and directed.

S&F factory made box type steel window 1.25mm thick double shutter ERW hollow P section of each frame size 60mmx25mm including grill using 10 sqmm bar double rebated both guage and glass shutter comprised gaused glazed & Skelton shutter ERW section 50mmx20mm & 1mm thick with two openable leaf consisting of two number sash bars of T-Section 20mmx3mm complete welded to frame with one vertical mullion of ERW box type T-Section of size 60mmx25mm and 1.25mm thick with following fittings welded to the frame shutter :- i) Hold fast 150mm long mild steel flat iron 12x3 mm made to shape- 04 Nos per window. ii) Handle of Z section 20mmx25mm, 100mm long – 01 No per leaf. iii) MS tower bolt 150mm long 2 No per leaf. iv) Z section 20mmx25mm, 100mm long stopper – 01 Nos per leaf. v) Cleat 55 mm long of solid square 15x20x.63mm square - 01 Nos per leaf vi) MS pintal hinges 12 x 75 mm - 2 Nos each leaf vii) 10 mm squre guard bar @ 10 cm c/c viii) 25 x 3 mm flat iron for joint of both frame wiremesh & Glazed welded inner side and outer side of frame (ix) 0.36 mm nominal dia of stainless steel wire mesh and average width of aperture 1.40 mm fixed in glazed/gazed skelton shutterof window (x) 3mm thick sheet glass ordinary quality and with oil putty in squre n exc 0.50 sqm in each pane fixed in glazed /guage skelton shutter of window xi) Fabrication and fixing arrangements as per specification including taking down, cutting holes and making good dismantled portion in PCC 1:2:4 type B-1 /cement plaster 1:4 as require and make finish good to the existing surface complete all as specified and directed. Note: (i) Windows shall be povided as per the TD of Chief Engineer Chandigarh Zone, TD-219 i.e typical details of Box window (Steel) with fly proof shutter. (ii) The mode of measurement shall be only one for the set of two i.e wire mesh window and glass window at one location and nothing extra shall be measured on this account.

S&F mild steel work as in door frames , window guard bars fixed independently and similar articles conforming to Fe-290 Gde-165 complete all as specified and directed.

Hacking out old broken glass of any thickness/size of any description from wooden frames/metal frame glazed with putty or fixed with beads complete all as specified and directed.

S&F 4mm thick sheet glass oridinay quality in squares n.exc 0.5 sqm each fitted with oil putty or wooden beading complete all as specified and directed.

S&F 4mm thick one side frosted sheet glass oridinay quality in squares n.exc 0.5 sqm each fitted with oil putty or wooden beading complete all as specified and directed.

S&F as in repairs 20 mm PVC Ball valves high pressure with epoxy coated alluminium rod and polyethelene float and flynut complete,screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

Material and labour for preparation of newly plastered surfaces of walls including all cornices, pilasters etc and applying two coats of weather proof acrylic exterior emulsion paint of approved tint shade over a coat of approved primer on wall as in camouflage complete all as specified and directed.

M&L removal of existing treatment on walls and applying two coats of interior acrylic emulsion over and including one coat of primer over a layer of 3 mm thick Birla wall putty including filling in cracks etc to achieve a uniform & smooth finish incl preparation of surfaces complete all as spacified and diricted.

Material and Labour for preparation to old decorated surfaces of wall including all cornices, pilasters etc (plastered or unplastered) by brooming down or steel wire burshing, scraping down smoke, soot, moulds, moss and efflorescence salts, trading oil andy greasy spots etc and applying one coat of weather proof acrylic exterior emulsion paint of approved colour/shade as in camouflaging pattern complete all as specified and directed.

Material and Labour for preparation of old decorated surfaces of walls/curve stone/concrete (plastered or unplastered ) by brooming down etc applying over one coat of synthetic enamel paint (white or tinted) on walls /curve stone etc complete all as specified and directed.

Material and Labour for preparation of old decorated surfaces of wall (plastered or un-plastered) including cornices, pilaster etc by brooming down with steel wire brushing, scraping down, smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc and applying one coat distemper oil bound emulsion (white or tinted) on walls complete all as specified and directed.

Material and Labour for preparation of old decorated surfaces of wall (plastered or un-plastered) including cornices, pilaster etc by brooming down with steel wire brushing, scraping down, smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc and applying one coat of white wash on walls complete all as specified and directed.

Material and Labour for preparation of old decorated surfaces of ceiling (plastered or un-plastered) including cornices, pilaster etc by brooming down with steel wire brushing, scraping down, smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc and applying one coat of white wash on ceiling etc complete all as specified and directed.

Dismantling Old toughned glass doors / partitions with all fittings complete all as specified and directed.

S&F 12 mm thick Toughened Glass as in door Shutter / Partitions with dust proof Polyethlyene strips 15 mm wide including making frosting / itching of glass with logo or other designs as approved by GE complete all as specified .

S&F Overpanel patch with fixing plate of size 164mmx51mm made of stainless steel ( grade SS 304 ) suitable for toughned glass doors / partitions complete all as specified .Make :- Hettich, Godrej

S&F Top patch of size 164mmx51mm made of stainless steel (grade SS 304) suitable for toughned glass doors / partitions complete all as specified .Make :- Hettich, Godrej

S&F Bottom patch of size 164mmx51mm made of stainless steel ( grade SS 304 ) suitable for toughned glass doors / partitions complete all as specified .Make :- Hettich, Godrej

S&F Patch lock of size 164mmx51mm made of stainless steel ( grade SS 304 ) suitable for toughned glass doors / partitions complete all as specified .Make :- Hettich, Godrej

S&F Floor Spring of size 256mm x 105mm x 50 mm with Euro Profile Cylinder made of Brass with chromium plated suitable for toughened glass door shutters up to width 950 mm, complete all as specified. Make :- Hettich, Godrej

S&F as in repairs 19mm thick Solid PVC sheet (Celluka ply) of density not less than 600Kg/cum with prelam economic cover single side with colour / shade approved by GE fixed as in cupboard box, shelves, shutter of rooms, kitchen etc. as per specification & drawing complete all as specified & directed. Make: Rajshri Plastiwood / Century

All as per description of serial item No. 109 here in before but both side prilaminated.

S&F as in repair auto close hinge stainless steel with spring mechanism, for cabinet shutters Make : Hettich / Kaff

S&F as in repair 45 mm wide telescopic Channel 20 inch long with Ball bearing runners, Full Extention Load capacity 50 kgs complete all as specified and directed. Make : Hettich

S&F as in repair Stainless Steel handles 100 mm size fixed to Cabinet Shutters fixed with stainless steel screws complete all as specified and directed. Make : Hettich / Kaff

S&F as in repair Stainless Steel handles 150 mm size fixed to Cabinet Shutters fixed with stainless steel screws complete all as specified and directed. Make : Hettich / Kaff

S&F as in repair Back To Back Pull Handle 25 mm dia, CTC Length 200, End to end 300, Stainless Steel Satin Finish (grade SS 304) suitable for toughned glass doors complete all as specified. Make :- Hettich Cat Part No HPH 2330 or equivalent in Godrej.

S&F as in repair magnetic catcher, brass body fixed with brass screws or with adhesive complete all as specified and directed.

S&F as in repairs vitreous china WC, Rimless, Single Piece, 360mmx675mmx750mm size, with UF soft close seat cover, Hinges, fixing accessories and cistern fittings including 300 mm S trap, Chrome finished brass Jet Spray with connection lead, complete all as specified . Make : Jaquar Cat part No OPS-WHT-15851 SN or equivalent make

S&F as in repairs Table top wash hand basin Vitreous china, light colour / white of size 565mmx420mmx140mm including brass chromium plated waste coupling, chain, plug, porcelain rubber stopper, brackets, 32mm bore PVC waste pipe of appropriate length ilcluding making necessary connections complete all as specified and directed. Make : Jaquar Cat part No KUS-WHT-35935 or equivalent make

S&F as in repairs Single lever basin mixer (hot & cold water) with pop up waste system & 450 mm long braided & making necessary connections as approved Design complete all as specified and directed. Make : Jaquar Cat Part No FLR 50518 or equivalent make

S&F as in repairs SS Towel Rail 600 mm long complete all as specified and directed. Make : Jaquar Cat Part No AKP-35711PS or equivalent make

S&F as in repairs corner glass shelf complete all as specified and directed. Make : Jaquar Cat Part No AQN 7771 or equivalent make

S&F as in repairs Toilet Paper holder, chromoim plated without flap complete all as specified and directed. Make : Jaquar Cat Part No AHS 1553 or equivalent make

S&F as in repairs Soap Dish complete all as specified and directed. Make : Jaquar Cat Part No AHS 1531or equivalent make

S&F as in repairs chromiun plated Towel Ring complete all as specified and directed. Make : Jaquar Cat Part No AQN7721 or equivalent make

S&F as in repairs Soap Dispenser with glass bottle complete all as specified and directed. Make: Jaquar Cat Part No AKP35735P or equivalent make

S&F as in repairs Tumbler Holder complete all as specified and directed. Make : Jaquar Cat Part No ACN1141N or equivalent make

M&L non skid HD Polished coloured cermaic jointless tiles 8 to 10 mm thick of size 600mmx 1200mm as in floors set and jointed in neat cement slurry and pointed with coloured Epoxy grout to match, over and including 15mm thick screed bed in cement mortar (1:4) complete all as specified and directed .

M&L Glazed HD Polished coloured cermaic jointless tiles 8 to 10 mm thick of size 600mmx 1200mm as in vertical surfaces / dado and jointed in neat cement slurry and pointed with coloured Epoxy grout to match, over and including 10 mm thick rendering in cement mortar (1:4) complete all as specified and directed .

Demolition of reinforced cement concrete of any description as in chajjas, parapet wall and similar suspended work and removing to outside MoD land complete all as specified and directed.

M&L formwork to soffits of suspended slab such as roof slabs, floor slabs, landings, chajjas and similar work n.exc 200mm thick horizontal or sloping complete all as specified and directed.

M&L formwork to edges of concrete flats, treads, slabs, floors, roofs etc. n.exc 20cm wide and sides of RCC/PCC bends in walls, horizontal or sloping, chajjas and similar work exc 10cm but n.exc 20 cm wide complete all as specified and directed.

S&F mild steel deformed TMT bars 8 mm dia and over cut to length & bent to shape required including cranking bending spirally for hoping for column, hooking ends & binding with mild steel wire not less than on 0.9 mm dia or securing with clips complete all as specified and directed.

All as per description of serial item No. 133 here in before but 6mm to 8 mm dia bars as in stirrups, spacer & binders

M&L cutting chases pining in concrete surfaces and making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings steps, cills, sun shades slabs not exc 10cm girth complete all as specified adn directed.

M&L RCC M-20 (Design Mix) using 20 mm graded stone aggregate as in chajjas upto any height complete as specified and directed. Note:Reinforcement shall be be measured separately

M&L RCC M-20 (Design Mix) (using 20mm graded stone aggregate) as in footings, beams, plinth beam, bases for columns etc. complete all as specified and directed. Note:Reinforcement shall be be measured separately

M&L RCC M-20 (Design Mix) (using 20mm graded stone aggregate) as in columns , pillars , posts and the like complete all as specified and directed. Note:Reinforcement shall be be measured separately

M&L making POP cornices and other ornamental designs of any shape of width 100mm to 300 mm using POP and chicken wire mesh including all necessary templates, shuttering as required and applying two coats of interior plastic emulsion paint over a coat of approved primer complete all as specified and directed. Note - For payment purposes, external dimensions of the particular Design by considering the uniform size shall only be accounted.

M&L 3D textured coloured cermaic jointless outdoor wall facing tiles 8 to 10 mm thick of size exc 0.09 sqm but not exc 0.36 sqm as in vertical surfaces / dado and jointed in neat cement slurry and pointed with coloured Epoxy grout to match, over and including 10 mm thick rendering in cement mortar (1:4) complete all as specified and directed.

M&L preparation of newly plastered surfaces of ceilling / chajja or similar suspended work and applying three coats of white wash complete all as specified and directed.

M&L as in repairs, rubber moulded pre-cast concrete interlocking paver blocks (coloured) pre polished of any shape and size with grey cement and pigment confirming to IS 15658-2006 of 60 mm thickness M-35 Grade laid over and including 25mm thick (average thickness) tibba sand cushioning including PCC 1:1.5:3 type B-0 (using 12.50 mm graded stone aggregate) benching to discontinuous edges of the Paving complete all as specified and directed.

M&L for Marble / Udaipur green stone 20mm thick as in floor finishes machine cut, bedded jointed and pointed with grey cement slurry including cutting and polishing and rounding edges, set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15 mm thick screed bed in cement maortar 1:6 complete all as specified and directed.

Use and waste of Formwork to sides of pillars, posts, struts, piers, columns and stanchions of square , rectangle or polygonal section , rough finished flat surfaces complete all as specified and directed

Use and waste of Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, rough finished flat surfaces complete all as specified and directed

M&L Cutting openings through brick walls built in cement or cement lime mortar for door, window and other openings or enlarging existing openings, converting window into door openings, etc or cutting out defective brick work for under pinning, incl providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard core, etc to store and rubbish not exc. 50m and making good of jamb and reveals of opening with plastering with cement mortar 1:4 complete all as specified and directed .

M&L for 2nd class hardwood plain fillets of sectional area exc 3 sqcm but n exc 6 sqcm , rectangular or triangular in section clean sawn , secured with nails or brads complete all as specified.

S&F as in repairs door stopper of brass body and tongue with hard drawn steel spring with 150 mm cover plate complete all as specified .

S&F as in repairs curtain rods 25 mm dia, Stainless steel (SS Grade 302 ) of approved quality including Stainless steel fancy dead end and free end brackets, knobs etc complete all as specified and directed.

S&F as in repairs CI floor trap (long nose) 75mm bore with grating including Jointing to waste pipe fixed in PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) complete all as specified and directed.

S&F as in repairs CP grating 125mm dia circular of approved make and fixing with cement mortar 1:3 as in repair complete all as specified and directed.

S&F of 110mm bore PVC (SWR) waste and vent pipes in any length with rubber ring joints fixed to wall including taking down of old pipes with fittings complete all as specified and directed.

S&F of 75mm bore PVC (SWR) waste and vent pipes in any length with rubber ring joints with laid in trenches, wall or in floors including taking down of old pipes with fittings complete all as specified and directed.

S&F PVC (SWR) bends of 110 mm bore with rubber ring joint complete all as specified and directed

S&F PVC (SWR) bends of 75 mm bore with rubber ring joint complete all as specified and directed

S&F PVC (SWR) reducers of 110 mm bore with rubber ring joint complete all as specified and directed

S&F PVC (SWR) 110mm bore with rubber ring joint Junction (single T) equal or unequal complete all as specified and directed.

S&F PVC (SWR) 75 mm bore with rubber ring joint Junction (single T) equal or unequal complete all as specified and directed.

S&F PVC (SWR) vent cowl of 110 mm bore with rubber ring joint complete all as specified and directed

S&F PVC (SWR) vent cowl of 75 mm bore with rubber ring joint complete all as specified and directed

S&F PVC coloured wall paper 2 mm thick to wall or floor with suitable epoxy based adhesive including removing old wall paper and making good surfaces complete all specified and directed.

Fixing only for Modular kitchen cabinet comprising of following :- i) Wire basket bottle rack- 4 Nos ii) Wire basket cuttlery box- 4 Nos iii) Wire basket grain trolly- 2 Nos iv) Wire basket plate rack- 2 Nos v) Wire basket cup and saucer rack- 4 Nos i) Plain Wire basket different patterns- 20 Nos with all fittings/ fixtures hinges, telescopic channel, handles etc. and including manufacturing of all cabinet made of 18mm thick celluka PVC board plain/ prelaminated colour PVC board and fixing the items fitted in position icluding cost all fasteners like screws, adhesives and nut and bolts in all as per space available at site complete all as specified and directed by engineer in charge. Note: a) All the above said accessories such as baskets, hinges, handles, ball bearing shall be measured as supply only under respective items. b) The qty against item no 163 to 175 may vary being measurable items and nothing extra shall not be paid if the quantities are varied while execution on ground. c) The mode of measurement for the said item shall inclusive of all fixing, screws, nut, bolts, adhesives etc. used to fabricate the said cabinet and fix in position and measured as for each for one complete Qtr .

Supply only 19mm thick Solid PVC sheet (Celluka ply) of density not less than 600Kg/cum with prelam economic cover single side with colour / shade approved by GE fixed as in cupboard box, shelves, shutter of rooms, kitchen etc. as per specification & drawing complete all as specified & directed. Make: Rajshri Plastiwood / Century

All as per description of serial item No. 163 here in before but both side prilaminated.

Supply only auto close hinge stainless steel with spring mechanism, for kitchen cabinet shutters complete all as specified and directed. Make : Hettich / Kaff

Supply only 45 mm wide telescopic Channel 20 inch long with Ball bearing runners, Full Extention Load capacity 50 kgs complete all as specified and directed. Make : Hettich Note : Each pair means 2 nos of telescopic channel, one piece fixed on left side and another piece fixed on right side.

Supply only Stainless Steel (SS 304) handles 100 mm size fixed to kitchen Cabinet Shutters complete all as specified and directed. Make : Hettich / Kaff

Supply only CP Stainless Steel (SS 304) Wire basket two shelf pull out (bottle rack) of size 150 mm x 485 mm x 430 mm complete all as specified and directed. Make: Hettich / Godrej/ Ebco

Supply only CP Stainless Steel (SS 304) Wire basket (Cuttlery Box ) size 420 mm x 485 mm x 100mm complete all as specified and directed. Make: Hettich / Godrej/ Ebco

Supply only CP Stainless Steel (SS 304) Wire basket (Grain Trolly ) size 425 mm x 495 mm x 350 mm complete all as specified and directed. Make: Hettich / Godrej/ Ebco

Supply only CP Stainless Steel (SS 304) Wire basket (Plate rack) size 420 mm x 485 mm x 150 mm complete all as specified and directed. Make: Hettich / Godrej/ Ebco

Supply Only CP Stainless Steel (SS 304) Wire basket (Cup and Soucer rack ) size 420 mm x 485 mm x 100 mm complete all as specified and directed Make: Hettich / Godrej/ Ebco

Supply only CP stainless Steel (SS 304) plain Wire basket of size 420 mm x 485mm x 100 mm complete all as specified and directed. Make: Hettich / Godrej/ Ebco

Supply only CP stainless Steel (SS 304) plain Wire basket of size 420 mm x 485mm x 150 mm complete all as specified and directed. Make: Hettich / Godrej/ Ebco

Supply only CP stainless Steel (SS304) plain Wire basket of size 420 mm x 485 mm x 200 mm complete all as specified and directed. Make: Hettich / Godrej/ Ebco

Taking down copper / aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets etc. removing from site and making good disturbed surface of walls, floors, etc. to match with existing complete all as specified and directed.

Dismantling and taking down flourescent tube light fittings of any wattage or size for repair/replacement complete all as specified and as directed.

Dismantling and taking down Ceiling fan / Exhaust fan and after cleaning painting it complete, in situ with synthetic enamel paint by spraying including filling cavities with filler and reconnect the same and testing complete all as specified and directed.

Taking down carefully MCB Distribution board SPN/TPN off sizes & any capacity by unscrewing from DB box, complete all as specified and directed.

M&L Point wiring for One light/fan point controlled by one switch with PVC insulated fire retardant low smoke (FRLS) multi stranded copper conductor cable of 1.5 sqmm with and including concealed non-metaalic rigid PVC conduit heavy duty (ISI mark) and pressed steel terminal boxes (for mounting switches / sockets /regulators / ceiling roses etc) made out of MS sheet not less than 1.6 mm and 6cm depth including painting with one coat of red oxide primer on internal and external surface covered with 3mm thick laminated plastic sheet ISI marked including 1.5 sqmm PVC insulated fire retardant low smoke (FRLS) multi stranded copper conductor cable as earth continuity wire connected to common earth and each terminal box/fitting all as specified and directed . Note :- (i)The wiring shall be provided in standard colour code i.e. Red for Phase, Black for Neural and Green for earth. (ii) The quoted rate is deemed to include for cutting/chasing for concealing the conduit and making good the surface to match the existing surfaces. (iii) In case of ceiling portion where concealed conduiting is not possible, the surface conduit shall be provided ad directed. (iv) The earth wire shall be connected to common earth and each terminal boxes and fitting all as directed.

All as per description of serial item No. 180.00 here in before but for One 3-pin socket outlet 5 Amp on independent board.

All as per description of serial item No. 180.00 here in before but one 3 pin socket outlet 5 Amp on same board

All as per description of serial item No. 180.00 here in before but for One 5-pin socket outlet 5/6 & 15/16 Amp on independent board. with 2.5 sqmm FRLS multistranded copper cable including 2.5 sqmm FRLS multistranded copper cable as earth continuity wire connected to common earth and each terminal box/fitting complete all as specified and directed.

Taking out carefully the existing burnt sub main wiring of size 4 Sqm / 6 Sqmm PVC insulated multi stranded aluminum conductor cable along-with earth continuity conductor from the PVC / rigid steel, concealed / surface conduit complete all as specified and directed.

Supply and laying sub main wiring complete with 03 runs (Phase, Neutral & Earthing colour code) of single core 6 sqmm fire retardant low smoke (FRLS) PVC insulated copper conductor cable multistranded and sheathed LT 1100 V grade drawn through and including steel metalic conduit 20 mm dia ISI marked and accessories surface fixed on wall /floor etc all as specified. Note:- 03 runs of 01 metre cable with one metre conduit shall be considered as one unit for measurement purposes.

Supply and laying sub main wiring complete with 03 runs (Phase, Neutral & Earthing colour code) of single core 4 sqmm fire retardant low smoke (FRLS) PVC insulated copper conductor cable multistranded and sheathed LT 1100 V grade drawn through and including steel metalic conduit 20 mm dia ISI marked and accessories surface fixed on wall /floor etc all as specified. Note:- 03 runs of 01 metre cable with one metre conduit shall be considered as one unit for measurement purposes.

Supply and fixing Switch piano flush type single pole one way 5/6 amp complete all as specified and directed..

Supply and fixing Switch piano flush button single pole one way 15/16 amp complete all as specified and directed.

Supply and fixing bell push flush type single pole one way 5 amp complete all as specified and directed.

Supply and fixing Socket out let 2 in 1, 3 pin, 5/6 and 15/16 amp multipurpose, flush type complete all as specified and directed.

Supply and fixing as in repairs Ceiling rose surface Bakelite 65 x 50 mm three terminals complete all as specified and directed.

S&F as in repairs call bell AC 230 voly single pole complete all as specified and directed.

supply and fix MCB DB single pole and neutral 240 volt SPN 04 way with 200 Amps rated bus bar double door type complete all as specified and directed.

All as per description of serial item No. 193.00 here in before but 8 way

Supply and fix as in repairs MCB SPN 10-32 Amps 240Volts, Breaking capacity 10 KA 'C' curve complete all as specified and directed.

Supply and fix as in repairs MCB SP 6-32 Amps 240Volts, Breaking capacity 10 KA 'C' curve complete all as specified and directed.

Supply and fixing as in repairs IP-20 linear Retro LED T-8 tubular lamp with extruded aluminium/ PC body and PC diffuser complete with inbuilt driver 1x20 watt Cat Ref LTT8-20,in existing batten/fitting after removing the old choke, stater including electrical connection Make: Crompton Greaves Cat Ref DMLN1 LT8-16/20 or equivalent in Havells/Phillips

All as per description of serial item No. 197.00 here in before but 1x10 watt.

Suply and fixing Lamp holder angular PVC polycrbonate type with back plate suitable for PVC casing capping/conduit fitting complete.

S&F as in repairs sheet metal enclosure single pole and neutral encolsure with two pin and earth plug and socket complete with provision for fixing of one MCB SP 20 Amps complete all as specified and directed.

Supply and fixing as in repairs stepped type electronic fan regulator , SP 230 Volt 100/120 watt complete all as specified and directed.

Suply and fixing as in repairs recessed LED ceiling panel luminare 36 watt provided with best in class aesthetics premium white powder coated frame blends seamlessy with ceiling layout suitable for 600X600 MM modular ceiling grid and also can be suspended with provided kit and celing rose etc complete all as specified and directed. MAKE- Crompton Greaves Cat Ref:- LCPL-36-CDL(2x2) or equivalent of philips/syska.

S&F as in repair pre-painted galvalume Aluminium zinc coating GI based corrugated or semi-corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa and 150 GSM as in ridges fixed with self taping screws complete all as specified and directed.

Supply and fixed as in repair ornamental design gumti made of white or coloured marble of all over size 1.2m x 0.6m x 0.6m consisting of conical shape Dome of size (0.5m x 0.5m x 0.5m) and 04 Nos column of size (0.04m x 0.04m x 0.7m) fixed over RCC/Brick column fixed with araldite or epoxy based mortar up to any height complete all as specified and directed. Note: Marble Dome shall be fixed on the existing RCC/Brick pillar

Supply and fixed as in repair ornamental design gumti made of white or coloured marble of all over size 1.0m x 0.4m x 0.4m consisting of conical shape Dome of size (0.4m x 0.4m x 0.4m) and 04 Nos column of size (0.02m x 0.02m x 0.6m) fixed over RCC/Brick column fixed with araldite or epoxy based mortar up to any height complete all as specified and directed. Note: Marble Dome shall be fixed on the existing RCC/Brick pillar

Supply and fixed as in repair ornamental design gumti made of Red Stone (Bulmera) of all over size 1.0m x 0.4m x 0.4m consisting of conical shape Dome of size (0.4m x 0.4m x 0.4m) and 04 Nos column of size (0.02m x 0.02m x 0.6m) fixed over RCC/Brick column fixed with araldite or epoxy based mortar up to any height complete all as specified and directed. Note: Red stone (Bulmera) Dome shall be fixed on the existing RCC/Brick pillar

SHREE GURU NANAK CONSTRUCTION COMPANY

Vijay Enterprises