8900/2022-23/E8

Amount

Demolition of brick work built in cement mortar all as specified & directed.

M & L Brick work with sub class 'B' bricks, straight or curved on plan exc 6 m mean radius, built in cement mortar 1:6 completeall as specified & directed.

M & L brick work with sub class 'B' bricks, straight or curved on plan to any radius, built in cement mortar 1:4 as in half brick thick walls complete all as specified & directed.

Taking down chowkats or frame but with shutters (without taking off shutters from the frames) exc 1.5 sqm but not exc 4 Sqm each all as specified & directed.

S & F 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints all all as specified & directed.

S & F 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides all as specified & directed.

M&L Prelaminated particle board of 12mm thick, exteriorgrade, prelaminated one side with decorative choicelamination & other side balancing white lamination fixed with screws to timber frame work

S & F 35 mm thick factory made second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., divided in to squares with plain, chamfered or rounded mitred and rebated sash bars any numbers, edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing glass etc all as specified & directed.

S & F solid PVC door frames of sizes 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube complete all as specified and directed.

S & F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top and bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail , lock rail and bottom rail on either side and as gap insert for top rail and bottom rail , panelling of plain colour PVC sheet to be fitted in the MS framewelded/ sealed to the stiles and rails with suitable PVC sheet beading , and jointed together with solvent cement in the frame at siteall as specified & directed.

S& F Factory made Composite window with double shutter of thickness 2mm for glazed and gauzed side in one pressed steel frame including stainless steel wire cloth 0.45mm nimonal dia of wire and average width of aperature 1,40mm and 5mm thick figured glass with complete all as specified

S&F galvanised mild steel wire cloth ,0.56mm nominal dia of wire and average width of aperature 1.18mm and fixed with tinned tacks,or galvanised wire steples all as specified & directed.

S&F in repair 3mm thick sheet glass ordinary quality and glazing with oil putty in square n. exc 0.5 sq.m. each pane all as specified & directed.

M&L PCC 1:2:4 type B1 (using 20 mm graded aggregate as in hold fast.) all as specified & directed.

S & F M.S. Flat iron of size 25x3 mm as in hold fast and similar small articles, cut to length, bent to shape, drilled hole and fixed with screw etc. conforming to Fe-290 Gde-E-165 complete all as specified & directed.

S & F 150 mm Mild steel barrel tower bolts, stove enamelled black, with bright bolt and all as specified & directed.

S & F 75mm long medium weight, cold rolled mild steel Butt hinges all as specified & directed.

S & F in repairs 150 mm Mild steel pressed handles, oval type, stove enamelled black complete all as specified & directed.

S & F 100 mm Mild steel pressed handles, oval type, stove enamelled black complete all as specified & directed.

M&L for Preparation of New or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of Pink primer all as specified & directed.

M&L for Preparation of old painted wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) all as specified & directed.

Dismantling wrought iron or mild steel work of any description like angle tee, channeletc.

S&F mild steel in joist, channel,or tee sections fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated ) Fe-410-W (Gde E-250) quality B

S & F in repair vitreous china squatting pan Orissa pattern size 580mm x 440mm white with integral foot rest including provision of lime concrete bedding, connection to trap and flush pipe etc as in floor all as specified and directed.

S & F in repair 10 Ltr capacity PVC valveless syphonic action type flushing cistern low level white with inlet ball valve and brackets float and handle, and bracket all as specified & directed.

S & F in repair bib taps 15mm bore cast copper alloy chromonium plated with crutch or butterfly, handle, screwed down, screwed for iron pipe all as specified & directed.

S & F in repair 15 mm bore wall mixer for hot & cold water screwed down for iron pipe and fixed all as specified & directed.

S & F in repair stop valve 15mm bore cast copper alloy chromonium plated screwed down high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions all as specified & directed.

S & F PVC connection pipe 15mm size with PTMT nuts of 450 length including fixed in repairs all as specified & directed.

Taking up or down 15mm bore steel tubing and connection including cleaning for refixing or removel to store.

S & F in repair 15 mm bore Galvanized Steel tubes, medium grade for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors all as specified & directed.

Taking up or down 20mm bore steel tubing and connection including cleaning for refixing or removel to store all as specified & directed.

S & F in repair 20 mm bore Galvanized Steel tubes, medium grade for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors in all as specified & directed.

Demolition and breaking up to 110m bore drain pipes (SGSW/AC/RCC/PVC) set in CM complete all as specified and directed

S&F in repair vitreous china wash basin white of size 550x400mm incl waste coupling, bracket and PVC flexible waste pipe 40mm dia incl taking down old and as specified and directed.

S & F in repair 15 mm bore brass CP mixer for hot & cold water screwed down for iron pipe and fixed all as specified & directed.

S & F in repair towel rail 600mm long of chromium plated brass screw and wooden / plastic cleats all as specified & directed.

S & F in repairs 110mm bore PVC Pipes single socketed, in any length with rubber ring joints, fixed to walls or laid in floor all as specified & directed.

S & F in repairs 110 mm bore PVC (SWR) bends any radius all as specified & directed.

S & F in repair 75 mm bore PVC (SWR) Soil, waste and vent pipes, single socketed in any length with rubber ring joints laid in floors or trenches, etc including necessary excavation & earth work whenever required complete as specified.

S & F in repair 75 mm bore PVC (SWR) bends any radius.

S&F in repairs Grating down 100 mm dia of PTMT 9 minimum weight 25 gm all as specified & directed.

Taking down cement plaster of any description on brick walls/ ceiling etc including racking out joints, hacking for key, scrubbing down with water complete all as specified & directed.

M&L rendering 15 mm thick on external surfaces of wall in cement mortar 1:4 all as specified and directed.

M&L rendering 10mm thick in cm (1:4) as in ceiling , soffit of chajja etc.complete all as specified & directed.

M&L rendering 10 mm thick on internal surfaces of wall in cement mortar 1:6 finished even & smooth without using extra cement as specified and directed.

M & L preparing new plastered surfaces of walls and applying two coats of cement base paint all as specified & directed.

M & L preparing new plastered surfaces of internal walls and applying two coats of distemper oil emulsion over a coat of primer all as specified & directed.

M & L preparing new plastered surfaces of ceiling chajjas facia etc. and applying three coats of white wash all as specified & directed.

M & L preparing new plastered surfaces of walls as required and applying a coat of distemper oil emulsion all as specified & directed.

M & L preparing old plastered surfaces of walls as required and applying one coats of cement base paint all as specified & directed.

M & L preparing old plastered surfaces of ceiling as required and applying one coats of white washing all as specified & directed.

Demolition cement concrete ( unreinforced) of ground floors and paving n exc 15 cm thickness(below or above ground floor) all as specified & directed.

M&L Cement concrete type B-1, 1:2:4 (20mm graded aggregate) of 40mm thick all as specified & directed.

M/L 75 mm thick Cement concrete type B2, 1:2:4 (using 40 mm graded granite stone aggregate) in base of flooring/ hard standing finished evern & smooth w/o using extra cement all as specified & directed.

M & L PCC 1:3:6 type C2 (75 mm thick as in plinth protection & finishing the surface even & fair W/o using extra cement complete all as specified & directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises all as specified & directed.

M&L for non skid cereamic coloured tiles 7 to 8mm thick (square/ rectangle) area of each tiles exceeding 0.11 sqm but n. exc.0.18sqm (400mm X 400 mm), in floor etc set and joined in neat cement slurry and pointed in white or .coloured cement to match all as specified & directed laying over & including 15 mm thick in cement mortar 1:4 screed bed or bedding layer of mortar for laying floor finishes as directed.

M&L for joint free non skid cereamic coloured tiles 7 to 8mm thick (square/ rectangle) area of each tiles exceeding 0.18 sqm but n. exc.0.38sqm (600mm x 600mm), in floor etc set and joined in neat cement slurry and pointed in white or .coloured cement to match complete all as specified and directed laying over & including 15 mm thick in cement mortar 1:4 screed bed or bedding layer of mortar for laying floor finishes as directed.

M&L Glazed, coloured, ceramic, tiles of size (450mm x 300 mm) x 7 mm thick, on vertical surfaces, such as dadoes, etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles all as specified and directed 10 mm thick in cement mortar (1:4) as in backing layer for laying of tiles in vertical surfaces complete all as specified & directed.

M&L chequered cement tiles concrete 25cm x 25 cm x 22mm thick, with grey cement & pigments set jointed in neat cement slurry in floor all as specified & directed. laying over & including 15 mm thick in cement mortar 1:4 screed bed or bedding layer of mortar for laying floor finishes as directed.

M&L Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing laying over & including 20 mm thick in cement mortar 1:6 screed bed or bedding layer of mortar for laying floor finishes as directed.

M&L Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed, edge moulding in kotastone consider 10 mm thick in cement mortar (1:4) as in backing layer for laying of tiles in vertical surfaces complete all as specified & directed.

Excavating In post holes (or similar holes) each n.exc 0.5 cu.m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not excedding 25cm.

M&L Cement concrete Type C-2 1:3:6 (40 mm graded aggregate) in foundation,filling and mass concrete for post holes.

M&L MS steel work in staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, Fe410-w( Gde-E250 quality A)etc.

Dismantling water tank ( cement concrete) and removing to stores exc250ltr n.exc 500ltr all as specified & directed.

S&F 500 litres capacity three layers rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top), hoisted and fixed in position all as specified & directed.

S&F 20 mm dia Ball valve PTMT valves, high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule all as specified & directed.

M&L preparation of new steel and iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer complete all as specified and directed.

Dismantling Plain or corrugated steel sheeting any guage, thickness, including Nainital or similar pattern roof coverings

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. (Make TATA or JSW)

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

S&F in repairs 18mm to 20mm dia curtain rod/rail, anodised aluminium alloyl chromium plated with & including fixing brackets, stops, rollers etc.

Dismantling boarding, any description, fixed in any position with nails or screws

S&F Rolled sections Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc.. n exc 10 kg each brackets, conforming to Fe.290.Gde-E-165 (Brackets over 10 kg each to be measured under 'Structural Steel')

M&L providing and fixing Gypsum Board 12mm thick in ceiling fixed with screw as per manufactures instruction

Demolition cement concrete ( unreinforced) of Concrete of any description and in any position not otherwise all as specified & directed.

M & L reinforced cement concrete (NominalMix) type B1 1:2:4 ( 20mm graded aggregate) as in Chajjas

M&L Mild steel TMT bars 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, beams,hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips.

Taking down carefully existing copper/aluminium point wiring of any type (light/fan/socket or power) complete fixture and fittings such as switches ,ceiling rose, regulators,sockets etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per sch of credit) and making good disturbed surfaces of wall, floor, ceiling etc.

M & L for point wiring with copper conductor cable multistrand, PVC sheathed 1.5 Sqmm size for one light point ,fan point, exhaust fan point,or bell point controlled by one switch including one run of 1.5 Sqmm multistrand PVC unsheathed copper conductor cable for earth continuity in PVC Concealed conduit of approved size and quality ISI marked in Brick machinary/Stone machinary wall complete including cutting, chasing, pinning and making good the disturbed surfaces by using cement mortor 1:3 of wall by providing cement plaster and matching the surfaces by white wash/colour wash all as per existing finishes complete including all other required accessories as specified in Preamble 1(a) to (q) of section 19 of SSR Part-II under heading "Point wiring".fixed on walls/ceiling including sunk cast iron terminal boxes grouting/ flushing on wall for mounting fittings like switch, sockets etc covered with 3.00 mm thick plastic laminated sheet top cover complete all as specified and directed by Engr-in-charge.

All as per item no. 83 but for one fan point, exhaust fan point.

All as per item no. 83 but for one bell point.

All as per item no. 83 One light point controlled by two - way switch with cables 1.5 sq. mm size

All as per Srl item No 83 here in before but for one 5 amps socket out let on same board.

All as per Srl item No 83 here in before but for one 5 amps socket out let on independent board.

All as per item No 83 above but for power point 3 pin switch socket 15 Amp with PVC insulated copper conductor cable multistrand unsheathed 2.5 Sqmm on independent board including one run of 1.5 Sqmm multistrand PVC sheathed copper conductor cable for earth continuity in cocealed PVC conduit of appropriate size and best quality ISI marked, including suitable size of copper lugs and all other required accessories as specified in preamble 1(a) to (q) of Section-19 of SSR Part-II under heading "Point wiring" fixed on wall including sunk cast iron terminal boxes grouting/ flushing on wall for mounting fittings like switch, sockets etc covered with 3.00 mm thick plastic laminated sheet top cover all as specified and as directed.

Supply & Fixing Switch piano, flush button, single pole one way 5 Amps

Supply & Fixing switch 2 way 6A flush type, Make :-Anchor/Cona/Plaza/SSK

Supply & Fixing Bell push 6A flush type Make :-Anchor/Cona/Plaza/SSK

Supply & Fixing Socket outlet 3 pin, 5 amps flush type.

Supply & Fixing Switch piano, flush button, single pole one way 15 amps

Supply & Fixing Socket outlet 2 in 1,3 pin 5 and 15 amps flush type.

Supply and fix in replacement ceiling rose 65X50 mm three terminals with back plate complete all as specified. Make :- Anchor / Cona / Plaza / SSK

S & F in replacement Decorative, wall mounting, brushed nickel finish fixture with Opal Glass diffuser suitable with 9 W LED lamp B22 base. including 1 N x 9 W LED Lamp / 1 N x 7.5 W LED filament lamp Cat part of Havells Make LHFOAJE1TZ1I060 (Floretine WL 1LS B22 SS) or equivalent to Crompton /Bajaj / Wipro complete all as specified and as directed by Engr-in- charge.

S & F in replacement of unserviceable Supply and fixing LED lights fitting 1x 20W,4 feet, 220V,AC decorative box type with driver, holder includingLED tube light connecting up with three core flexiblecopper conductor cable of suitable size from ceilingrose complete.Make- Crompton/Havells/Wipro

S & F in replacement of unserviceable LED mirror lights fitting 1x 10W, 2 feet, 220V,AC decorative box type with driver, holder includingLED tube light connecting up with three core flexiblecopper conductor cable of suitable size from ceilingrose complete.Make- Crompton/Havells/Wipro

S & F Buzzer, Ding Dong AC. 230 volts,single pole

Supply and fixing in replacement LED building security light fitting 25/35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete.Make- Havells/Wipro/Crompton

Supply and fixing street light bracket made out of 32 mm dia light grade GI pipe 1.5 mtr long bent in shape required fixed to pole/ wall with two Nos MS clamps made out of 25x4mm thick flat including nuts and bolts and washer etc complete for fixing of street light fitting including taking down existing.

Material and labour factory made sheet metal enclosure dust and vermin proof made out of 2.00mm thick Ms sheet of size 100x60x25 cm depth with double door hinged shutter and locking arrangement for fixing DBs,KWH meter etc flushed/semi flushed /grouting on wall as per site requirement including DIN rail channel for mounting of MCB,s SP/SPN. And provide in 4 rows TPN aluminium bus bar channel of rating 200 Amps duly mounted on 'F' class insulator with colour coded heat shrinkable sleeves and powder coated paint with suitable for one no for incoming of FP MCCB with internal connection of 16 sq mm multistrand copper wire with copper lugs from MCCB to Busbar etc. after prepration of surfaces with suitable glass vision panel complete all as directed (Note: Unit rate shall be inclusive of making good the area not exceeding 0.6 sqm and not exceeding 0.125m depth for filling the hollow existing surface with half bricks in CM (1:4) including taking down old unsv any type of sheet metal enclosure or main switch complete all as specified and as directed by Engr-in- charge.

S&F in repair Moulded case circuit Breaker (MCCB) TP Fixed type capacity 63 Amps ,415 Volts 50 HZ 10 KA including making necessary connection with spreader, link and copper lugs including taking down old unserviceable MCCB/ main switch of any capacity and make complete all as specified and as directed. Make:- C&S / Havells /Legrand /Indoasian/Standard

Supply & Fixing in replacement Sheet metal enclosure for DB,s, double door (when MCB,s to be used) single pole & neutral 12 way with 200 amps rated bus bar 240 volts with fixing arrangements. Make- C&S/Havells/Indoasian/Legrand

Supply and fixing inreplacement MCB single pole and neutral 6 to 32 Amps, 240 volts complete all as specified and directed. Make :- C&S/Havells/Indoasian/Legrand

Supply and fixing MCB single pole 6 to 32 Amps, 240 volts all as spd and directed. Make C&S, Havells, Legrand, L&T

M & L for sub main wiring with 6.0 sqmm copper conductor cable multistrand, PVC sheathed two run (as phase and neutral) and run 4.0 Sqmm multistrand PVC sheathed copper conductor cable for earth continuity in drawn in one PVC concealed conduit wiring in Brick machinary / Stone machinary wall complete including cutting, chasing, pinning and making good the disturbed surfaces by using cement mortor 1:3 of wall by providing cement plaster and matching the surfaces by white wash / colour wash all as per existing finishes complete all as specified and directed by Engr-in-charge.

Dismantling of old aluminium strip of any size, complete including making good of disturbed portions of wall all as specified and directed by Engr-in-charge.

S&F in replacement aluminium strip 25 x 3.15mm thick fixed with porcelain/PVC saddles and fixing screws etc with minimum two number saddles with screws on and including PVC gutties in each one mtr of length for roof conductors and down conductors above ground, complete all as specified and directed.

S&F in replacement Air termination single pointed aluminium rod 12 mm dia 300 mm long fixed including taking out old air termination rod complete all as specified and directed

S&F in Test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 nos. 8 mm dia 25 mm long hex. head screw complete all as specified and directed by Engr in charge.

Material and labour for Earthing complete with galvanised steel earth plate electrode 600x600x6.00mm thick burried directly in ground any type of soil including rocky soil also(earth pit not less than 2.25 Mtrs below ground level) with top edge of plate not less than 1.5 Mtr below normal ground level connected to GI earth lead wire of 4.0 mm dia by means of bolts, nuts, check nuts, as earth lead complete including 40 mm bore dia protection pipe GI medium grade upto 7.5m length, watering pipe 15mm bore dia GI medium grade 1.70m length, charcoal & salt filling, necessary earth work in any type of soil including rocky soil also, concrete pit, funnel removal of surplus soil upto 50m distance all as per electrical plate No.3 of SSR Part I and connected to earthing test point, main board including testing on completion all as specified and directed.

M&L in replacement for Earthing complete with galvanised steel earth plate electrode 60 X 60 cm X 6 mm thick, buried directly in ground (earth pit not less than 2.25 meter deep below ground level) with top edge of the plate not less than 1.5 meters below normal ground level, connected to and inclduing GI Strip 25X4 mm as earthing lead, by means of bolts, nuts, check nuts and washers of galvanised iron all as shown in electrical plate No 5 of MES SSR Part I and testing on completion inclduing excavation and earth work in any type of soil, PCC (1:3:6) type C1 chamber, and cover 6 mm thick in cement concrete (1:2:4) type B1, funnel with wire mesh, GI watering pipe 20mm dia medium grade and lugs complete all as specified and directed with earth resistance not more than 1.0 OHMS. Note- In case earth resistance more than 1.0 ohms, the contractor wiil re earthing at no extra cost.

M/s. Rishav Sood

M/S Ajay Kumar Mahajan

M/s Joginder Paul Bhatia

Pathania Builders

m/S Varun Gupta

Roshan Lal Thakur

M/s Shakti Electric Works

Havish Construction