GE/U(N)-24/2024-25 PERIODICAL SERVICES INCLUDING CERTAIN MISC REPAIRS AT ASHOK VIHAR CELL AND ADJOINING AREA UNDER AGE BR-II OF GE (N) UDHMAPUR

Amount

Complete removal of existing treatment on old decorated surfaces of wall plasteres or unplastered by washing ,rubbing down and stopping of distempred and painted surfaces and applying two coats of oil bound distemper over a coat of primer on wall applying 1 mm thick of wall care putty completed all as specified and directed by Engr-in charge .Note Wall care putty shall be applyed in two coat and each coat shall be rubbed and smoothhen by suitable emery/sand paper .

Preparation of old distempered surfaces of ceiling and plastered or unplastered by washing ,rubbing down and stoping of distempered and painted surfaces and applying one coat of oil bound distempered and fill up holes with wall care putty wherever necessary complete all as specified and directed by Engr-in Charge .

Preparation of old distempered surfaces of wall and applying one coat of oil bound distempre on wall and projection and fill up holes with wall car putty wherever necessary complete all as specified and directed by Engr-in Charge .

Preparation of old painted wooden surfaces of any description exceeding 10 cms width or girth applying one coat of synthetic enamel paint any colour, complete all as specified and directed.

Preparation of plastered or unplastered old surfaces of walls,chajja,balcony,facia etc by brooming down or steel wire brushing, scraping down smoke soots ,moulds ,moss efforescent salls,treating oil and greasy spots etc, and applying one coat of cement base paint , complete all as specified .

Preparation of plastered or unplastered old surfaces of walls,chajja,balcony,facia etc by brooming down or steel wire brushing, scraping down smoke soots ,moulds ,moss efforescent salls,treating oil and greasy spots etc, and applying one coat of exterior emulsion paint white or tinted/any colour complete all as specified .

Preparation of old or previously painted steel or iron surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint,any colour complete all as specified.

Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for rendering 15 mm thick cement plaster on fair face of brick work or concrete surfaces (mixed with water proofing compound) of wall cement mortar 1:4 and finished smooth without using extra cement complete all as specified .WPC shall be paid seperately.

M&L for rendering 5 mm thick cement plaster on fair face of brick work or concrete surfaces of ceiling in cement mortar 1:3, finished even and smooth without using extra cement, complete all as specified.

M&L for rendering 10 mm thick cement plaster on fair face of brick work or concrete surfaces of wall in cement mortar 1:6, finished even and smooth without using extra cement, complete all as specified.

Preparation of new plastered surfaces of wall and applying two coat of cement base paint over one coat of primer , complete all as specified and directed by Engr-in Charge .

Preparation of new plastered surfaces of wall and applying two coat of oil bound distemper over one coat of primer & 1mm thick wall putty , complete all as specified and directed by Engr-in Charge ..

Preparation of new plastered surfaces of ceiling and applying three coat of white wash , complete all as specified and directed by Engr-in Charge .

M & L for writing letter for figure (Black, Roman, Italic or Indian ) n.exc 30cm hight including back black paint complete all as specified and directed by engr-in -charge .

S& F in repair 22mm MS dark brown powder coated curtain rod with end brackets and side brackets with designer end pieces fixed with screw and plugs as per directed complete all as specified.

S& F 20mm in repair stainless steel curtain rod with end brackets and side brackets with designer end pieces fixed with screw and plugs as per directed complete all as specified.

Supply only integral water proofing compound

Taking down chowkats or frames with shutters(without taking off shutters from frame) not exc 1.50 Sqm each including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out holdfasts shall be finished identical to existing finish without any extra cost to Govt.), complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from frame) exc 1.50 Sqm and not exc 4.00 Sqm each including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out holdfasts shall be finished identical to existing finish without any extra cost to Govt.), complete all as specified and directed.

Taking down Shutters of any description exc 1.0 sqm and n.exc 2 sqm each, complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frames/wooden frame/aluminium frame including punching or drilling out old glazing pins or spring clips any type of beading and providing and fixing new clips or pins, complete all as specified and directed.

Dismantling Wall and ceiling boards (fibre pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets, complete all as specified and directed.

Taking up or down steel tubing and connection, including cleaning for re-fixing or removal to store of size of pipe 15 mm bore laid on floor or wall complete all as specified and directed.

Taking up or down steel tubing and connection, including cleaning for re-fixing or removal to store of size of pipe 20 mm bore laid on floor or wall complete all as specified and directed.

Dismantling water tanks of 1000 ltrs and remove from site, complete all as specified and as directed.

Dismantling water tanks of 500 ltrs and remove from site, complete all as specified and as directed.

Dismantling of floor hearth or wall tiling incl CM, bedding (but not backing) and rubbish off the premises complete all as specified and directed.materail obtain from dismantling thrown away out side MD land.

Checking of joinery (wooden/steel) iron/aluminium mongery, pelmet box, door springs etc requiring carpentry work and carrying out minor repairs such as tightening of screws/nails, minor adjustment of joinery, door /windows by means of planer/chisling etc. including petty repairs material like screws/nails, plug etc. to make it functional, complete all as specified and directed. Note : 1. Any items required to be replaced shall be paid under respective items and in that case this items shall not be measured and paid. 2. The contractor or his authorised rep shall collect the complaint of all carpenter work from complaint cell /Engr-in-charge daily and all complaint will be rectified by the contractor with in same day than the returned the complaint slip after completion of complaint and get recipt from concered JE/Enge-in-charge .If he fails to complete the work with in same day then recovery will be made @150.00 per complaint per day .

S & F powder coated (of approved colour ) aluminium sections as in frame & shutter of doors, windows (sliding), ventilators (louvers/fixed type) and fixed frame etc fixed to wall including, preparation of disturbed portion both side (internal & external surfaces of wall) match with existing surface treatment and all sides of aluminium frame shall be sealed with silicon sealent (inner/outer face) complete all as specified as directed by Engr-In-Charge (Note :- Rates includes for necessry roller for sliding and locking of sliding windows/ ventilator, etc)

Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work including welding con- forming to Fe.290.Gde-E-165

S&F Aluminium handles Handles 100mm long Fancy type fixed with screws to window shutters complete all as specified.

S&F Powder coated Hinges 100mm long match with window shutters fixed to door shutters with screw complete all as specified.

S&F Powder coated Aluminium Towerbolt Hinges 150mm long match with windows shutters fixed with screw complete all as specified.

5mm frosted/ tinted sheet glass, ordinary quality and glazing with rubber neoprene packing for aluminium doors/windows in square/rectangular in each pane, complete all as specified and as directed.

Repair to aluminium door or window of any size, shape and description including easing, cutting, drilling, including provn of parts such as rubber gasket, blanket cloth, cleats, rollers locks etc to make door or window fully functional complete all as directed by Engr-in- Charge.

S&F in repair 18 mm thick prelaminated medium density fibre boards, glossy finish/UV finish interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screwsas in cup board, shelves, kitchen cabinet, etc, complete all as specified and directed.

S&F in repairs Drawer side channel of std size and incl of roller for moving drawer, mild steel bright finish, or electrogalvanised, width of flap 30mm fixed in repair, complete all as specified for modular kitchen, complete all as specified and directed.

S&F in repairs Stainless steel multipurpose bracket in wooden drawer/partitions for storing rations of various types made of 4mm dia stainless steel rods, fixed in side partitions etc fixed , complete all as specified for modular kitchen. Make : Usha shriram entp pvt ltd or equivalent, complete all as specified and directed.

Factory made solid PVC door frame of size 50mm x 47mm made out of 5mm wall nut colour PVC sheet reinforced with MS Square tube complete all as specified and directed. Make-Rajshree Doors or equivalent as approved by GE

Factory Made Solid PVC Moulded Door Shutterof wall nut colour, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet onback face, supplying & fixing in frame at site as per specification & drawing complete all as specified and as directed. Make: Rajshree Doors or equivalent as approved by GE

Pressed steel frames 105 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed

Pressed steel frames 125 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed

S&F Plain framed, panelled shutter 35mm thick 2nd class hard wood (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated

35mm thick 2nd class hard wood glazed and skelton shutter open rebated and prepare to receive glass, gauge etc for door edges of framing plain, chamfered rounded fitted with cut and mitred beads for securing glass etc 8.24 (a), complete all as specified and as directed.

S&F 100 mm long mild steel butt hinges, medium weight, cold rolled and fixed, complete all as specified and as dircted.

S&F 150mm long aluminium, anodised, barrel tower bolts of extruded section and fixed, complete all as specified and as dircted.

S&F 150 mm long aluminium handles, cast type, anodised and fixed, complete all as specified and as dircted.

S&F 250 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed, complete all as specified and as dircted.

S&F in repairs continuous piano hinges mild steel, bright finish or electro galvanised with width of flap 30 mm when open, complete all as specified and as dircted.

S&F in repairs 40 mm dia cup board knobs, brass polished, fixed with nut, screws and washer of mild steel, complete all as specified and as dircted.

S&F in repairs mild steel powder coated or chromium plated peg sets of six pegs of standard quality as approved by Engr-in- charge and fixed etc, complete all as specified and as dircted.

S&F in repairs floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, size 140 mm, complete all as specified and as dircted.

S&F in repairs stainless steel wire cloth of 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples, complete all as specified and as dircted.

S&F in repairs PVC bathroom cabinets quality as approved by Engr-in Charge, of size 600mmx400mm with mirror on front door and with one towel rail for hanging towel of MS chromium plated fixed with screw and wooden gutties etc, complete all as specified and as dircted.Make:- Prayag or equivalent

S&F in repairs MS helical door spring 300mm size including roller and roller plate fixed to wooden or welded to steel frames with welding/fitted with screws etc, complete all as specified and as dircted.

S&F in repairs 125 mm long aluminium anodised hasp and staple with mild steel hinge pin including bolts to hinge plate and fixed with screws, complete all as specified and as dircted.

S&F in repairs door closers of aluminium die cast body hydraulically regulated designation No 3, universal type, suitable for door shutters of 851 to1000 mm in width and of weight between 61 to 80 kgs and fixed, complete all as specified and as dircted.

S&F 3.00 mm thick sheet glass, ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane, complete all as specified and as dircted.

Vitreous china wash down water closet (pedestal pattern) white complete, including connection to drain pipe and to flushing pipe antisyphonage pipe etc, fixed in repair, complete all as specified and as directed.

Plastic water closet seat, closet pattern with flat bottom and cover and incl mild steel chromium plated or aluminum hinges device complete fixed in repairs , all as specified.

Vitreous china squalting pan, orissa pattern size 580 x 440 mm white with integral foot rests, P or S trap long body with integral foot rest and fixed with cement concrete bedding complete all as per specified. (Fixed in Repair).

PVC low level flushing cistern 10 ltrs capacity , valve less, syphonic action type, white, with inlet, ball valve, float and handle including brackets, PVC 32mm dia flushing pipe etc., fixed in repairs,complete all as specified and directed

Vitreous china,white, wash hand basin, flat back of size 550x400mm, white including MS brackets and pedestal pattern including cutting for and pinning including 32mm dia CP brass waste coupling and PVC waste pipe, fixed in repair complete all as specified.

Supply and fixing in repair PVC lid with locking arrangements suitable for PVC water tank of capacity upto and including 500 Ltr, complete all as specified and as directed.

Supply and fixing in repair PVC lid with locking arrangements suitable for PVC water tank of capacity exceeding 500 Ltrs and upto and including 1000 Ltr, complete all as specified and as directed.

Supply & fixing ball valves as in repairs high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed of 15mm bore (minimum weight 142 gms ) including fixing of socket if required and taking out old UNSV existing ball valves, complete all as specified and as directed.

Supply & fixing ball valves as in repairs high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed of 20 mm bore including fixing of socket if required and taking out old UNSV existing ball valves, complete all as specified and as directed.

S & F in repairs for spindle suitable for 15mm bore CP taps/ mixers, complete all as specifed and as directed.

15 mm dia medium grade galvanised tubes with all fittings and fixed to walls (concealed type) and ceiling or laid in floors complete all as specified and directed.

Steel water tubing, medium grade, 20mm bore galvanised with all fittings and fixed to walls and ceiling or laid in floors complete all as specified and directed.

20mm dia brass chromium plated tubular towel rails,D type,60 cm long between flanges Fixed in repair complete all as specified and as directed.

Glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated brackets, guard and railing 60cm long fixed in repair complete all as specified and as directed.

Single lever wall mixer 3 in 1, telephonic type, brass, chromium plated, fancy type, with capstan head handles with lettered 'hot' and 'cold', screwed down high pressure, including CP brass wall flanges and necessary extension nipples screwed for 15mm bore pipe connection, with provision for both hand shower and over head shower, fixed in repair, complete all as specified and directed.

Centre hole mixer for mixing hot & cold water for wash hand basin, cast copper alloy, with dual capstan heads, chromium plated, screwed down high pressure, with lettered 'Hot' & 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe suitable for 15mm bore, fixed in repair complete all as specified and directed..

Shower rose, brass, chromium plated, 15mm dia with or without swivel joint, with & including CP brass arm and wall flange, fixing to steel pipe or union as in repair complete all as specified and directed.

Angle valve, brass, chromium plated, fancy type, with capstan head handle screwed down high pressure, including CP brass wall flanges; screwed for 15mm bore pipe connection fixed in repairs complete all as specified and directed.

Bib taps, brass, chromium plated, fancy type, long nose, with capstan head handle screwed down high pressure, including CP brass wall flanges; screwed for 15mm bore pipe connection fixed in repairs complete all as specified and directed.

S&F in repair pillar taps, cast copper alloy, with capstan heads, chromium plated, fancy type ,screwed down high pressure, with or without lettered 'Hot' or 'cold' with long screwed shanks and fly nuts, screwed for iron pipe of dia 15 mm, complete all as specified and as directed.

Health faucet, brass, chromium plated, with 1250mm long 15mm dia chrome finish flexible pipe with wall hook, fixed in repair complete all as specified and directed.

PVC flexible connections 450mm long 15mm dia with brass flange nuts & washers complete all as specified & directed.

PVC flexible connections 600mm long 15mm dia with brass flange nuts & washers complete all as specified & directed.

S&F 15mm Stop valves, brass, fancy type with flange, chromium plated with long shank and cup (concealed type), screwed down high pressure, with capstan head handle, screwed both ends for iron pipe or for unions and fixed.

Soap dish, brass, chromium plated, heavy duty, fixed to wall with plugs with brass cromium plated screws, fixed in repair complete all as specified and directed.

CP brass grating 100mm dia, centre hole, fixed in repair complete all as specified and as directed.

CP brass grating 100mm dia, fixed in repair complete all as specified and as directed.

Toilet paper holder, brass, chromium plated, heavy duty, fixed with brass screw complete all as specified and as directed

Sink wall mixer, brass, chromium plated, fancy type, with capstan head handles screwed down high pressure, with lettered 'hot' and 'cold', including CP brass wall flanges and necessary extension nipples screwed for 15mm bore pipe connection, fixed in repair, complete all as specified and directed.

Sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including waste coupling and waste pipe & bedding in CM to dwarf wall or incl fixing cantilever brackets and connecting union to pipe overall size 915mmx 460mm bowl size 410mmx330mmx160mm, fixed in repair complete all as specified and as directed. Make: Neelkanth/ Nirali/ Jaina/ Blue star.

Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of 1000 litres capacity (Tripple layer), white in colour, including water tank cover (internaly/interlocking arrangment for water tank cover), hoisted and fixed in position including tank nipple inlet & outlet and connecting up pipes complete all as specified and directed.

Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of 500 litres capacity (Tripple layer), white in colour, including water tank cover (internaly/interlocking arrangment for water tank cover), hoisted and fixed in position including tank nipple inlet & outlet and connecting up pipes complete all as specified and directed.

Ball brass valve 20mm dia high pressure with polythene float and fly nut complete all as specified and directed..

Cleaning of 1000 lit capacity water tank including removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc, complete all as specified and as directed.

Cleaning of 500 lit capacity water tank including removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc, complete all as specified and as directed.

Non skid ceramic coloured tiles 7 to 8 mm thick (sqare/ rectanglear) area of each tile exc 0.11sqm but n exc 0.18 sqm in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15mm thick screed bed in Cement mortar (1:4) complete all as specified and directed.

M&LVirified light shade Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:4 complete all as specified and as directed.

Glazed ceramic coloured tiles in vertical surfaces of wall of size 450mm x 300mm x 7 mm thick as approved pattern approved by GE, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick rendering in Cement mortar 1:4 as in skirting, dado, etc, complete all as specified and directed.

Preparation of new or previously untreated steel surface of any description exc 10cm with or girth an applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F powder coated anodised aluminium door shutter, aluminium section weighting 0.55 Kg/m including necessary joining cleats, glazing, clips, rubber packing, 02 Nos in each door, hinges, anodised aluminium snap beading screws etc. complete all as specified and directed by Engr-in-Charge.

Preparation of new wooden or untreated wood surfaces of any description exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed.

KALSOTRA CONSTRUCTION CO

takashdeep traders

JOGINDER SINGH

MADAN LAL SHARMA AND SONS

M/S JANDIAL ENTERPRISES