PROVN OF MD ACCN FOR OFFRS (MAJ AND ABOVE) AND ORs AT BELGAUM

Amount

Lumpsum price worked out by the tenderer for BUILDINGS AND STRUCTURES as listed in Schedule ‘A’ Part-I

Lumpsum price worked out by the tenderer for INTERNAL WATER SUPPLY as listed in Schedule ‘A’ Part-II

Lumpsum price worked out by the tenderer for INTERNAL ELECTRIFICATION as listed in Schedule ‘A’ Part-III

Lumpsum price worked out by the tenderer for SITE CLEARANCE & DEVELOPMENT as listed in Schedule ‘A’ Part-IV

Lumpsum price worked out by the tenderer for PROTECTIVE WORKS as listed in Schedule ‘A’ Part-V

Lumpsum price worked out by the tenderer for ROAD, PATH & CULVERT as listed in Schedule ‘A’ Part-VI

Lumpsum price worked out by the tenderer for SEWAGE DISPOSAL as listed in Schedule ‘A’ Part-VII

Lumpsum price worked out by the tenderer for AREA DRAINAGE as listed in Schedule ‘A’ Part-VIII

Lumpsum price worked out by the tenderer for RAIN WATER HARVESTING as listed in Schedule ‘A’ Part-XI

Lumpsum price worked out by the tenderer for FENCING, COMPOUND WALL & GATE as listed in Schedule ‘A’ Part-X

Lumpsum price worked out by the tenderer for EXTERNAL WATER SUPPLY & BOREWELL as listed in Schedule ‘A’ Part-XI

Lumpsum price worked out by the tenderer for EXTERNAL ELECTRIC SUPPLY as listed in Schedule ‘A’ Part-XII

SCHEDULE 'A' PART XV (MISCELLANEOUS ITEMS) Note: This schedule is not pre-priced by MES

INTERNAL WATER SUPPLY

S & F 15mm bore two way bib taps, fancy type brass chromium plated screwed end for iron pipe or brass ferrule complete all as specified and as directed.

S & F 15mm bore Shower arm, any type, brass chromium plated, 230mm long with wall flange, complete all as specified and as directed.

INTERNAL ELECTRIC SUPPLY

Material and labour for point wiring complete all as specified with 1100 Volts grade 1.5 Sqmm PVC insulated FR-LSH unsheathed cable with multistranded copper conductor conforming to IS:694:1990 with ISI marking in and including PVC rigid conduit medium grade of size minimum 20 mm with all accessories concealed in wall / ceiling including continous earth wire 1.5 Sqmm PVC insulated FR-LSH unsheathed 1100 Volts multistranded copper conductor connected to common earth and earth dolly including modular metal flush boxes concealed in walls and modular white plate covers with frame for mounting of modular switches/sockets/fan regulators etc complete all as specified for the following:-

(a) One light / fan point controlled by one switch.

(b) One three pin switch socket 6 Amps outlet on independent board.

(c) One three pin switch socket 6 Amps outlet on same board.

(d) One light point controlled by two nos of two way switches.

(e) One bell point controlled by one bell push.

All as per item No 15 here in before but with cable 4 sqmm multi stranded copper FR-LSH wire, 1100 Volts grade, unsheathed for one 3 pin socket out let 15 amps on independent board including continuous earth wire PVC insulated 4 sqmm copper stranded conductor FR-LSH, 1100 Volts grade, connecting to common earth and earth dolly complete all as specified

Supply and fixing modular Telephone socket including modular metal flush box and modular white cover plate all as specified

Supply and fixing modular TV socket including modular metal flush box and modular white cover plate all as specified

Supply and fix power module 240V, 20A complete with 4 module metal flush box, cover plate, Starter, Plug & Socket all as directed

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 225 mm sweep with, blades, and frame and louvers complete all as specified and directed by engineer-in-charge.

Supply and fixing LED luminaire 300 mm x 300 mm, 18 watt, 220 V AC surface type with high efficiency PMMA diffuser soft glare free light luminous efficacy of minimum 100 lumen/W complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete.

S & F Decorative Wall Bracket Light, input voltage range 140-270 V, input frequency 50-60 Hz made up of poly carbonate, suitable for 9 W LED lamp B22 base complete all as specified and directed by the engineer-in-charge. Make:Havell's Floret line WL 1LS B22SS or equivalent in Make Philips Cat Part No. 34303 or in Make Wipro Model No. Beu Home BW01

S & F Decorative Wall Bracket Light, input voltage range 140-270 V, input frequency 50-60 Hz made up of poly carbonate, suitable for 9 W LED lamp B22 base complete all as specified and directed by the engineer-in-charge. Make:Havell's City 3 model or equivalent model of PHILIPS, or Wipro

S & F LED Bulb 9W B22, BEE star rated with minimum 3 star rating

S & F LED bed side Reading light, 2 Module with poly carbonate base, 230V, 3.3 W with warm white colour light effect with dimming. Make: Legrand Myrius Cat No.679316/Equivalent

Supply, install, commission and testing cubical type LT meter box indoor, suitable for 415 Volts, 50 HZ, 3 Phase 4 wire system, manufactured by a CPRI approved factory, floor mounted, dust & vermin proof, front operated door with necessary locking arrangement made of 50 x 6mm MS angle iron frame work and CRCA sheet of 2.0 mm thick duly painted with two coats of powder coated paint of approved shade after seven tank treatment process both internally and externally complete all as specified and as directed. Note: The panel shall be suitable to accomodate 04 Nos. Smart Meters and MCBs as required at site.

All as per Item No. 26 above but suitable to accommodate 01 No TPN DB 6 ways and 10 Nos Single phase smart meters. Note for Ser No. 26 & 27: MCB DB, MCCBs, MCBs & smart meters shall be measured & paid under relevant items.

M & L for submain wiring using 6 runs of 10 Sq mm 1100 V grade single core FR-LSH flexible cable conforming to IS 694: 2010, having multi-drawn thin strands of electrolytic copper conductors and insulation for phase, neutral and earth continuity conductor connecting to earth dolly, colour-coded as per IS 11353: 1985, drawn in medium grade PVC recessed conduits, conforming to IS 9537 (Part- 3): 1983, of suitable size, including making good disturbed surfaces of wall/ ceiling/ floor complete all as specified in IS 732: 2019 and as directed. Note: Phase & neutral conductors (04 runs), earth continuity conductor (02 runs) and PVC conduit (01 run) shall be combinedly measured as one length.

S & F Vertical Triple pole & neutral, double door, metallic distribution board 6 ways conforming to IEC 61439-3, suitable for flush / surface mounting with provision for 4P MCCB as incomer and 4P MCBs as outgoing, reversible metal door, suitable capacity copper busbar, fully shrouded neutral bar, earth bar, wire set & cable ties for cable management, pre fitted masking sheet, etc. having IK 09 & IP 43 protection complete all as specified in IS 732: 2019 and directed by the engineer-in-charge. (Officer Qtrs Block of 04 Qtrs & ORs Block)

S & F Vertical Triple pole & neutral, double door, metallic distribution board 4 ways conforming to IEC 61439-3, suitable for flush / surface mounting with provision for 4P MCCB as incomer and 4P MCBs as outgoing, reversible metal door, suitable capacity copper busbar, fully shrouded neutral bar, earth bar, wire set & cable ties for cable management, pre fitted masking sheet, etc. having IK 09 & IP 43 protection complete all as specified in IS 732: 2019 and as directed. (Officer Qtrs Block of 02 Qtrs)

S & F GI pipe bracket for security light fitting, having 1.5 m long x 40 mm diameter light grade GI pipe, including fixed to wall with GI clamps, nuts, bolts & washers with two coats of synthetic enemal paint over a coat of red oxide primer complete in all respect as specified and directed.

Material and Labour for Earthing complete with galvanized steel earth plate electrode 60cmX60cmX6mm thick, buried directly in ground (earth pit not less than 2.25m deep below normal ground level) with top edge of plate not less' than 1.5meters below normal ground level, earth plate connected to galvanized earth lead wire 4.00 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 of MES SSR-2009 (part I Specifications) connected to earth test point all as specified or indicated including testing on completion, including necessary excavation and earth work in any type of soil and adequate quantity of common salt & charcoal for alternate layer around the earth plate, including PCC (1:2:4) pit and 10mm thick C.I. cover with arrangement of hinge to 40x40x6mm C.I. angle iron frame, including 20mm dia G.I. pipe for watering purpose with the arrangement of funel and wire mess, including GI pipe of 15 dia for earth lead protection complete all as specified and as directed.

ROAD, PATH & CULVERT

S& F Road stud / cat eye ABS material body of size 100x100x20mm with two highly reflective reflectors fitted in the body, fixed with MS pin & approved epoxy adhesive as per manufacturer instruction on road, of colour as directed complete all as specified and as directed.

S& F road safety convex mirror 80cm dia. for road safety and shop security with adjustable brackets fixed on MS tube of size 60mm dia medium grade duly painted powder coated , 1.2m high fixed in PCC as per manufacturer instruction on road side or as directed complete all as specified .

S& F Readymade ABS plastic speed breaker / speed bumps of size 350x250x50mm designed so dynamically and compact to bear max load , with reflectors moulded in PMMA material to be fixed on road as per manufacturer instruction complete all as specified and as directed.

Material and labour for concrete bed to drain pipes of 450mm bore in PCC 1:3:6 type C2 (using 40mm graded stone aggregate) including packing under and haunching against the sides of pipe after they are laid and tested complete all as specified and as directed.

FENCING, COMPOUND WALL & GATE

S & F PVC coated MS galvanised Chain link fencing, with 3mm dia GI fencing wire and with minimum thickness of PVC coating as 1mm thick, 50 x 50mm mesh size, fixed complete all as specified and directed.

EXTERNAL WATER SUPPLY & BOREWELL

M&L for construction of valve chamber 900x900x900 mm depth with PCC foundation in the ratio 1:4:8 brick work cement mortar in the ratio 1:6 using of class B bricks , PCC 1:2:4 type B0 using 12.5 mm aggregate at the top , plastering 15 mm thick in the ratio 1:4 including MS sheet cover 3mm thick with angle iron frame 50x50x6mm locking arrengement complete with painting on steel surface with two coatsof synthetic enameeled paint over one coat of red oxide paint all as specified and directed . (Earth work shall be measured and paid seperetely in the respective items)

Drilling trial bore well vertically by using high speed reverse rotary fast rig machinery or any other approved method of size 150mm dia through any type of soil/rock strata such as hard/ dense soil, soft /loose soil, sandy clay, red clay, moored, weathered rock, hard rock, slightly fracturered rock, pebbled rock or any other geological formation at given location by ground water survey experts all as per IS-2800 for a depth not exceeding 150m below ground level complete all as specified and as directed.

Developing/drilling/reaming of bore well drilled before for enlargement of dia of bore hole of 150mm dia to 250mm dia vertically by using high speed reverse rotary fast rig machinery or any other approved method through any type of soil/rock strata such as hard/ dense soil, soft /loose soil, sandy clay, red clay, moorum, weathered rock, hard rock, slightly fracturered rock, pebbled rock or any other geological formation at given location by ground water survey experts all as per IS-2800 for a depth not exceeding 150m below ground level complete all as specified and as directed

Notes for item No. 39 & 40: (a) The location is Lakshmi Tek in front of Temple. (b) The unit rate quoted is deemed to include for collection of soil samples and strata, removal of mud and slurry from the site, hire charges of rig, tools and plants, machinery, fuel charges, labour, consumables, transportation, drilling and operation including use and waster of all necessary appliances and materials in complete all respects to entire satisfaction of Engineer-in-Charge. (c) ERW/MS/GI pipe, MS cap and PCC as required shall be measured and paid separately. (d) The hydro geological investigation by CGWB is available in the office of GE Belgaum. The tenderer shall refer the same before quoting for the items.

Developing and flushing the bore well with high pressure compressed air and thereafter by pumping muddy water with 25% extra capacity pump till clear water flows out complete all as specified and as directed by Engr-in-Charge Note :- Developing period shall be minimum of 24 hrs per bore well or till clear water flows whichever is later.

Supply, lowering and fixing of GI casing pipes into bore holes, GI plain pipe , , medium grade of dia 150mm bore, heavy duty, 6kg/sqcm pressure rating, ISI marked in length of 3 to 6m, complete including jointing of casing pipe suitable for retaining water without filter pack, to secure the pipes firmly in position conforming to IS specifications including all tools and plant and equipment required complete all as specified and as directed by Engineer-in-Charge.

Supply, lowering and fixing of GI casing pipes into bore holes, GI ribbed, screen slotted type pipe, medium grade of dia 150mm bore, heavy duty, 6kg/sqcm pressure rating, ISI marked in length of 3 to 6m, complete including jointing of casing pipe suitable for retaining water without filter pack, to secure the pipes firmly in position conforming to IS specifications including all tools and plant and equipment required complete all as specified and as directed by Engineer-in-Charge.

Supply and lowering into GI casing of bore well, column pipe of High Density Polymer Ethyl pipe of size 75mm bore dia, PN-8 (SDR-17) with ISI marked (IS:14930-2001) to connect from submersible pump to ground level of bore well complete all as specified and as directed by Engineer-in-Charge.

Supply and providing of gravel packing of suitable grade in the annular space between casing pipe and true bore hole, fine aquifers, complete all as specified and as directed by Engineer-in-Charge.

Conducting of electro logging test for water bearing zone identification including all tools and equipment complete all as specified and as directed by Engineer-in-Charge.

Conducting of Verticality test to the bore well as per IS-2800 (latest edition) complete all as specified and as directed by Engineer-in-Charge.

Conducting of Yield test of bore well (V-notch type) continuously for 08 hours in the presence of department representative nominated by Accepting Officer and submitting the test report including all equipment and consumable etc. complete all as specified and as directed.

Getting of water samples of bore well tested (chemical and bacteriological analysis) by any NABL accredited labs including collection of samples from various bore well in clean sterilized bottles, transportation and collection and submission of report in triplicate complete all as specified and as directed.

Supply and fix well cap cover made out of 6mm thick mild steel sheet suitable for casing pipe of bore well in two half sections duly hinged with locking and fixing arrangement, nuts and bolt with accessibility of pump delivery pipe, steel surface, duly prepared and coated with two coats of epoxy paint over a coat of epoxy primer complete all as specified and as directed by Engineer-in-Charge.

Supply and fix lifting /housing clamp for housing pipe, set of two, with mild steel of section 100mm x 20mm, 900mm long each bent to shape, held together with suitable bolts and buts, mild steel surface duly prepared and coated with two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer, for holding GI pipe complete all as specified and as directed by Engineer-in-Charge.

Supply and fix Air pressure gauge suitable for GI pipe 50 to 100mm bore of pipes including check nuts and making holes/arrangement for proper insertion complete all as specified and as directed by Engineer-in-Charge.

Submission of sample strata box and bore chart complete all as specified and as directed.

S & F 3 core copper conductor submersible cable (water proof) of 10 Sq mm size complete all as specified and as directed.

Supply and installation of Chemical Dozer bucket type of capacity 100 Ltrs with 0.25 HP motor, 1440 RPM single phase, IP 55, Foot mounting, agitator shaft and balde of SS-316 for chlorination by Granules with and including following items complete all as specified and as directed. Make RMCO, Model No. CDS-1010 or Equivalent. (a) Preparation tank of capacity 100 ltrs with lid, port hole, inlet/outlet/drain connection, level gauge etc and fitted with speed reducing motor & SS-316 agitator (FRP coated) (b) Dosing tank cap. 100 ltrs with lid, port hole, inlet/outlet/drain connection, level gauge etc.

EXTERNAL ELECTRIC SUPPLY

M/L for Earthing of machinery/equipment Installed at power house/substation complete using galvanized steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 mtrs deep below ground level) with top edge of the earth plate at a depth of not less than 1.5 mtr below ground level connected to galvanized iron strip 32x 6 mm as earthing lead by means of bolts, nuts and washers made out of GI/steel earth strip protected by GI light grade pipe of 40 mm dia and connecting to main panel board/switch board/control board all as shown in electrical plate No 3 of SSR Pt I incl PCC chambers in 1:2:4 and RCC cover slab with 8mm dia MS bars reinforced at 10 cm center to center both ways incl earth work like excavation, returning filling back disposal etc complete.

M & L for Earthing complete with galvanized steel earth plate electrode 60cmX60cmX6 mm thick buried in ground vertically to a depth not less than 2.25 metre below normal ground level, normal with top edge of earth plate not less than 1.5 metre below normal ground level, earth plate connected to a galvanised earth lead wire 4 mm dia as earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No.3 of MES SSR Part-I (2009) connected to earth test point all as specified or indicated including testing on completion with and including 15 mm bore light grade GI protection pipe 7.5 meters long for earth including PCC 1:2:4 pit with pre cast RCC 1:2:4 type B1 cover 40 mm thick reinforced with 6mm dia MS bars @ 100mm both ways with lifting hook made out of 6mm dia MS bars watering arrange,ent with funnel wire, common salt and charcoal filling, necessary excavation and earth work in any type of soil complete all as specified.

Supply and fix pole mounted FRP box weather proof type with hinged type doorof white colour of size 250x181x98 mm with 4 way PVC connector including 1 No MCB SP 6 amps and with suitable clamping arrangements for street light fittings all as specified and directed by Engr-in-charge.

Supply and fixing LED All in One solar street light fitting 36 watt luminiare output (120 Lumen/Watt) in built Lithium Ferro Phosphate battery 12.8V & 27 Ah, Mono Crystalline solar panel 60W &18V, PIR Sensor with Colour Temperature 6000K, MPPT charge controller with dusk down sensor, 2 days autonomy with dimming profile complete incuding galvanised Octagonal steel pole of 6 mtr length, 3 mm thickness, 70 mm top & 130 mm bottom with base plate 200x200x12 mm and 64 micron, M16x600/EN 8 grade foundaction bolt, 1 mtr arm for light fixing & PCC foundation all as per manufacturer's specifications/ instructions and as directed.

Supply, Installation, testing and commissioning of LT feeder pillar box, factory made, CPRI approved, complying with IEC 61439-1&2, outdoor type floor mounting with channel iron pedestal frame made out of 3 mm thick CRCA sheet steel for outer body and 2 mm thick for inner partition, compartmental type, dust proof, free standing, suitable for working on440 volts 3 phase 50 Hz A C supply, vermin proof, front and rear opening, hinged doors etc powder coated as per seven tank process and IP 55 protection, cable alley, cable entry hole at the bottom, earth strip 25x4mm , 3 phase and neutral aluminium bus bar suitable capacity with non adhesive color coded insulation sleeves mounted on insulators, drilled holes on bus bar strips for tapping including nuts bolts and washers, copper strips of suitable size for connecting MCCB, Digital Multifunction Meter with suitable rated CTs, LED phase indication lamps & PCC works complete all as specified and direc ted with the following switch gears: - (Main LT Panel Mohit Enclave 500 KVA Tansformer)

(i) ACB 4 pole 1000 Amps 35 KA, Manual drawout type - 01 No (Incoming) (ii) MCCB 4 pole 250 Amps 25 KA - 05 Nos (Outgoing) (iii) MCCB 4 pole 100 Amps 25 KA - 03 Nos (Outgoing) (iv) Timer switch three phase with contactor 16/20 amp (for JCOs Street Lt) - 01 Nos (vi) Aluminium bus bar 3 phase & neutral of suitable capacity.

All as per Item No. 61 but with the following accessories:- (LT Panel Laxmitek Area) (i) MCCB 4 pole 200 Amps 36 KA - 01 No Incoming (ii) MCCB 4 pole 100 Amps 16 KA - 04 Nos ( 03 Nos for Prop Qtrs & 01 Spare) (iii) Timer switch three phase with contactor 16/20 amp (for JCOs Street Lt) - 01 Nos

All as per Item No. 61 but with the following accessories:- (LT Panel Harshan Enclave) (i) MCCB 4 pole 125 Amps 36 KA - 01 No Incoming (ii) MCCB 4 Pole, 100 Amps, 25 KA- 01 No (iii) MCCB 4 pole 25 Amps 16 KA - 02 Nos

Disconnecting & dismantling the existing old U/s LT Panel Board with transformer Secondary cable of size 3.5 C x 400 Sq mm of approx length 20 mtr with the following U/s switch gears:- (i) MCCB 4 pole 630 Amps 35 KA - 01 No (Incoming) (ii) MCCB 4 pole 250 Amps 25 KA - 04 No (Outgoing ) (iii) Street Light timer with contactor & MCB (iv) LED phase indication lamp for 3 phase- 01 No

S&F cable route indicator Oval shape 200x150x6mm cast iron fixed on 25x25xx6mm angle iron incuding marking of HT/LT UG Cable duly painted and grouted in PCC

Supply,install,connect test and commisioning of Electric Chimney of width 90 cm , Baffle type filter, wall mounted type ,operating voltage 240 V, 50 Hz with having features of suction 1150-1200 m3 /Hr , push button controls,LED lights 2 Nos and all other necessary fittings and fixtures required complete . Make: ARCO 3D PLUS T2S2 BK LTW 90 of Faber/Equivalent model in Hindware/Elica/Glen

SHRUSTI CONSTRUCTIONS (BID ID -3259532)

Beejay Associates Contracts Pvt Ltd (BID ID -3261191)

Brahma Infra (BID ID -3260958)

Parth Infrastructure Pvt. Ltd. (BID ID -3261410)

K R TRADERS (BID ID -3261078)

SOOD ASSOCIATES PVT LTD (BID ID -3261204)

Bidder Name

PROSPECTS INFRA PVT LTD