1)ACP Signage Board: Design, supply, fabrication, fixing, installation and commissioning of 4 mm thick ACP signage board with 0.5 mm aluminium skin on both sides, minimum 25 micron PVDF coating on front side and 4?7 micron polymer/epoxy coating on back side, complete with vinyl/retro-reflective sheeting, aluminium substructure, SS fasteners and MS stand/support wherever required, including all necessary accessories, transportation, fixing and commissioning, complete in all respects as per approved design and Railway guidelines. 2)Foam Sheet Signage Board: Design, supply, fabrication, fixing, installation and commissioning of foam sheet signage board of approved thickness and size, with suitable MS/GI/aluminium frame, including vinyl/printed graphic, complete with required stand/support wherever necessary, all accessories, fasteners, transportation, fixing and commissioning, complete in all respects as per approved design.

Special Eligibility Criteria

1. 1

   Material to be supply as per railway requirement.

   Document required

Commercial-Compliance

1. 1

   Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.

   Document optional

Other Conditions

1. 1

   Inspection to be done by consignee.
2. 2

   Bidders must note that for offers having vague delivery schedule like - as per your requirements- or any time delivery- or indefinite like -02 to 12 months- or like - 06 to 08 months- etc, delivery period while issuing the contract shall be given as per the requirement best suited to this office within the quoted range. No further claim by the bidder shall be admissible in such cases.
3. 3

   By default your offer shall be considered as valid for 90 days from the date of tender opening. This is a mandatory requirement and no deviations to this will be permitted or considered while consideration of the offer. Bidders not willing to accept this condition must not submit the offer. Bids if submitted shall be considered as deemed acceptance of this condition. Any deviation regarding this or remarks for not agreeing to this condition, offered in the deviation column or anywhere including in uploaded document will not be accepted or considered while consideration of the offer. The purchaser may, at his discretion ignore any such deviation, if quoted, while issuing the contract. No further claim by the bidder shall be admissible in such cases.
4. 4

   Bidders to indicate the HSN code of the tendered item along with their GST registration number in the remarks column.

   Document optional
5. 5

   Whether statutory variation clause is acceptable to bidder?

   Confirmation required
6. 6

   MSEs registered under Udyam Registration are only eligible to avail the benefits under the Public Procurement Policy for MSE.

   Document optional
7. 7

   For orders placed on dealers/traders/agents, documents certifying that the material is sourced from the OEM/OEM authorised dealer will have to be produced by the firm at the time of delivery.
8. 8

   I have read the clause regarding restrictions on procurement from a bidder of a country which shares a land border with India; I certify that this bidder is not from such a country or, if from such a country, has been registered with the Competent Authority, I hereby certify that this bidder fulfils all requirements in this regard and is eligible to be considered. [Where applicable, evidence of valid registration by the Competent Authority shall be attached]

   Document optionalConfirmation required
9. 9

   I have read the clause regarding restrictions on procurement from a bidder of a country which shares a land border with India and on sub-contracting to contractors from such countries; I certify that this bidder is not from such a country or; if from such a country, has been registered with the Competent Authority and will not sub-contract any work to a contractor from such countries unless such contractor is registered with the Competent Authority. I hereby certify that this bidder fulfills all requirements in this regard and is eligible to be considered [Where applicable, evidence of valid registration by the Competent Authority shall be attached.

   Document optionalConfirmation required
10. 10

    Offers will be evaluated strictly as per the eligibility criteria as defined under para ELIGIBILITY CONDITIONS : Special Eligibility Criteria of this tender document. Any other eligibility criteria if mentioned anywhere in any of the uploaded documents will have no relevance with respect to evaluation of the bids.
11. 11

    Delivery Address: Narkher, Katol, Pulgaon, Multai, Padhurna stations , Contact to Prashant Behara , Mobile No. 8421712987

1. 1

   Other terms and conditions as per IMPORTANT TERMS and CONDITIONS OF TENDER [copy is attached] is applicable