RENOVATION OF BATHROOMS NEAR SINGLE JCOS ACCN HQ RTG ZONE SHILLONG PROVN OF RETAINING WALL (LENGTH 6 MTR) NEAR BLDG NO DSM 12 AT EASTERN COMD SAINIK ARAMGARH (ECSAG) CONSTRUCTION OF FOOTPATH 100 FT LENGTH (4 FT WIDE) WITH INTERLOCKING TILES INFRONT

Amount

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and as directed.

Excavation in foundation trenches n.exc 1.50m wide and n.exc 1.50m in depth and getting out in soft /loose soil complete all as specified and as directed.

Returning, filling in, including, spreading, leveling, watering and well ramming in layers n.exc 25cm complete all as specified and as directed.

Removing excavated material n.exc 50m and depositing where directed at a level n.exc 1.50m above the starting point complete all as specified and as directed.

Excavation over area n.exc 1.5m wide and n.exc 1.5m in depth and getting out in soft/loose soil complete all as specified and as directed.

Removing excavated materials (soil) exc 50 m and n.exc.250m and depositing where directed at a level n.exc 1.5 m above the starting point complete all as specified and as directed.

Rough excavation not exceeding 1.50 m deep and getting out soft/loose complete all as specified and as directed

Removing excavated material exc 500m and nexc 1.5 km depositing where directed at a level n.exc 1.50m above the starting point complete all as specified and as directed.

Earth filling under floors incl spreading, leveling in layers n.exc 25cm thick including well ramming and watering as reqd complete all as specified and as directed.

M&L for PCC (1:4:8) type D-2 using 40mm graded machine crushed stone aggregate as in foundation, mass concrete and other similar work complete all as specified and as directed.

M & L for 100mm thick PCC 1:4:8 type D2 as in subfloors finished even and rough without using extra cement complete all as specified and as directed.

M&L mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

S&F Steel work in tublar trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade ST-240 complete all as specified and as directed.

S& F Vitreous China EWC with P or S Trap including seat cover closed pattern with flat bottom and cover and MS CP hinging device, PVC flush bend pipe incl PVC Flushing cistern 10 Liter capacity , Low level valve less , symphonic action type , white with inlet ball valve float and handle including 32mm dia PVC flush pipe , a pair of cast iron brackets duly painted / erecting stand including cutting and pinning in ends ,making good distruved surfaces in Cement mortar 1:3 complete all as specified and as directed.

S&F vitreous China clay WHB flat back size 550x400 mm incl PVC waste pipe 32 mm dia, waste coupling brackets etc complete all as specified and as directed.

S&F fancy type CP pillar taps fancy type of 15mm dia with capstan head screwed down and fixed complete all as specified and as directed.

S&F 15mm bore Bib taps cast copper alloy with crutch or butterfly handle , screwed down for iron pipe fancy type chromium plated complete all as specified

M&L for RCC (1:2:4) nominal type B-1 (20mm graded stone aggregate) foundations, including raftfs, footings , plinth beams, bases for columns etc complete all as specified and as directed.

M&L formwork to sides of plinth beams , foundations and other similar works vertical or to bater to rough flat surfaces of concrete complete all as specified and as directed.

M&L for 2nd class hard wood Plain fillets square , rectangular or triangular in section , clean swan secured with nails sectional area exc 13 sqcm nexc 25 sqcm complete all as specified and as directed.

S&F 5 mm thick PVC sheet fillet of 35 mm for wall paneling inclusive of fixing on to wall to make PVC frame as per specification and drawing complete all as specified and as directed.

S&F solid PVC wall panelling consisting of 5 mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and as directed.

Demolition of stone slabs and tiles laid in any mortar of any description or thickness in floors , aprons etc complete all as specified and as directed

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

M&L for hard core of gauge n.exc 63mm, deposited spread and leveled in layers n.exc 15cm thick, watered and rammed to a true surface. complete all as specified and as directed.

M&L for 60mm thick coloured, machine pressed precast conctete rubber moulded interlocking paver block any shape and size confirming to IS 15658-2006, M-35 grade with grey cement and pigment complete all as specificied and directed

M&L for Sand filling under floor including well ramming for laying of interlocking paver blocks complete all as specified and as directed.

M&L for 100mm thick PCC 1:3:6 type C-2 as in sub base finished even and rough to recieve tiling complete all as specified and as directed.

S & F Vitreous china squatting pan of pattern 'long pan' size 580 mm white with 'P' or 'S' trap front or back inlet and foot rests, any pattern (excluding flushing cistern and flush pipe) complete all as specified and as directed.

S&F PVC valveless, 10 ltrs, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified.

Dismantling water tanks exc 500 ltrs but not exc 1000 ltrs capacity , complete all as specified

Supply and fixing rotational moulded HDPE water storage tank ,double layer ,ISI marked (cylendrical vertical type with closed top) of capacity 500 ltrs in position incl float valve high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed all as specified and directed.

S&F in repair Concealed stop cock, Chromium plated, 15 mm, all as specified and directed

S&F Grating doom 100 mm dia of PTMT.(Minimum weight 25 gms) complete all as specified and as directed.

M&L for cement concrete 1:3:6 type C2, 75mm thick as in plinth protection finished even and smooth with out using extra cement complete all as specified and as directed.

M & L for PCC 1:3:6 C2 (40 mm graded aggregate) as in surface channels and drains all as specified & directed.

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms,moulds,mitred/ stop ends complete all as specified and as directed.

M&L for chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry with gray cement and pigment in floors over and including 20mm thick screed bed in cement mortar 1:6 complete all as specified.

M&L for Walling of Random rubble, uncoursed , polygonal rubble walling brought up to course built in cement mortar (1:4) complete all as specified and as directed.

M&L for PCC (1:3:6) type C1 (using 20mm graded stone aggreagtes) including necessary form works as in precast bond stone set in CM (1:6) complete all as specified and as directed.

M&L for extra over Hammer dressing with maximum depression on face from straight edge held against the dressed surface n.exc 20mm in granite or trap stone complete all as specified and as directed.

M&L for raised pointing to random rubble stone masonary uncoursed or brought upto course in cement mortar (1:3) complete all as specified and as directed.

M&L PCC coping (1:2:4) type B-1 (using 20 mm graded aggregate) complete all as specified and as directed.

M&L for Loose filling with aggregates of guage 80 to 150mm broken stone or boulders behind weep holes complete all as specified and as directed..

Dismantling plain or corrugated steel sheeting, any guage, thickness incl nainital or similar pattern as in roof coverings complete all as specified and as directed.

Dismantling boarding any description fixed in any position with nails complete all as specified and as directed.

Dismantling Timber scantlings 40 sqcm and over in section in any position framed work complete all as specified and directed

Taking down chowkat or frame exc 1.5 Sqm but n.exc 4 Sqm each (without taking off shutter from the frame) complete all as specified and as directed.

Taking down chowkats or frames n. exc 1.50 Sqm each with shutters (without taking off shutter from the frames) complete all as specified and as directed.

Taking down shutters of any description nexc 1.0 Sqm refixing in same opening complete all as specified and as directed.

Taking down shutters of any description exc 1.0 Sqm and nexc 2 sqm refixing in same opening complete all as specified and as directed.

Taking down shutters of any description exc.1.0 Sqm and n.exc 2.0 sqm each complete all as specified and as directed.

Taking up or down steel tubing and connections of 15mm bore including cleaning for refixing or removal to store complete all as specified and as directed.

All as per items No 54 above but 20mm or bore of pipe

Taking down plastering on lathing (other than wire-netting, without removing lathing, in cement mortar (one side only measured in cases where both sides are plastered).

Demolition of Brickwork/solid concrete block work built in Cement mortar complete all as specified and as directed.

Dismantling Wall and Ceiling Boards (Fibre ,Pulp,insulation ,etc)or insulation boards /slabs/blankets ,any thickness,including cover fillets complete all as specified and as directed.

Dismantling of floor, hearth or wall tiling including cement mortar bedding ( but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

Demolition and breaking up drain pipes 150mmdia (salt glazed stone ware AC or reinforced concrete pipe set in cement morter) complete all as specified and as directed.

M&L for wrought second class hard wood in scantlings framed and fixed complete all as specified and directed

Fixing only for wrought second class hard wood in scantlings framed and fixed complete all as specified and directed

S&F pre-painted Galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick as in roof covering including fixing with self driving machine made screws with washers and fitting of same manufacture of approved profile, shape and colour complete all as specified and directed

S&F pre-painted Galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick as in roof covering including fixing with self driving machine made screws with washers and fitting of same manufacture of approved profile, shape and colour complete all as specified and directed

S&F 2 mm thick fibre reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof , wall etc complete all as specified and as directed

S&F GI Frame work for snaprid false ceiling comprinsing of GI perimeter channel 0.55mm thick with main T - flange of 25mm and web of 30mm fixed to surrounding wall angle with flange and web 25mm each , cross T with flange 25mm and web 25mm fixed to main T , main T is suspended from soffit @ 1200 mm C/C using GI wire of 4mm thickness GI frame will be 60cm x 60cm to receive E-board celling complete all as specified and as directed..

M&L 4mm thick E Board 600x600 mm prepainted fibre boards ceiling designer/decorative type with different designs as approved by the Engr-in-charge fixed or laid in ceiling timber /GI/ aluminium frame work in ceiling flat or sloping complete all as per manufacturer instruction.

M&L 2nd class hard wood in scantling clean sawn timber fixed all as specified.

M&L Preparing surfaces of wood and wood based materials, new or old, of any description and girth, not otherwise described and treated with Two coats of Creosote oil complete all as specified and as directed.

S&F 40mm thick 2nd class hard wood boarding in floors and skirting plained one side with butt joints and fixed with nails complete all as specified and as directed.

S&F solid PVC door frame of size 50 mmx 47 mm made out of 5mm plain colour PVC sheet reinforced with MS square tube as per specifiecation complete

S&F factory made solid panel PVC door shutter 30mm thick style consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail, panelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement supplying and fixing in the fram at site as per specification and drawing

S&F 30 mm thk Flush door shutters solid core construction with block board core and ply wood face pannels commercial veneered on both faces complete all as specified and as directed.

M &L for 35mm thick second class hard wood glazed skeleton shutters open rebated and prepared to receive glass gauge etc (Without sash bars) , edges of framing plain, chamfered or rounded , fitted with cut and mitred beads for securing glass etc complete all as specified and as directed.

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and as directed.

S&F Aluminium alloy, anodised, sliding door bolt with hasp staple (bolt type) 300mm size and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and as directed.

S&F aluminium anodised barrel bolts and fixed of 200 mm length complete all as specified and as directed.

S&F Extruded Aluminium, anodised, bow handles of size 150mm complete all as specified and as directed.

S&F Butt hinges, medium weight, cold rolled mild steel, size of hinges 75mm complete all as specified and as directed.

S&F butt hinges 100 mm medium weight mild steel cold rolled and fixed

S&F butt hinges 100 mm extruded brass with mild steel hinge pin bright polsihed and fixed type B-11 complete all as specified and as directed.

S&F Aluminium anodised barrel tower bolts of extruded section and fixed complete 150 mm long complete all as specified and as directed.

S&F extruded aluminium alloy handles fabricated type anodised of size 150 mm complete all as specified and as directed.

S&F powder coated (min powder coating 50 micron) anodised aluminium frame for doors, windows , ventilators plain or sliding type with one or more rebates including joining cleat for fixing etc complete all as specified and as directed

S&F powder coated(powder coating min 50 micron) anodised window and ventilator shutters side hung/sliding type without sash , aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, rubber neoprene packing , anodised aluminium snap beading screws ,anodised aluminium fittings such as peg stays 150 mm long(1 no) hinges type B-21 100 mm long (2 no) suitable handle (1 no ) incl stainless steel wire cloth complete as specified

M&L for 4.80 mm thick sheet glass quality and glazing fixed to aluminium frame exc 0.50 sqm complete all as specified and as directed.

M&L for 4.80 mm thick frosted sheet glass quality and glazing fixed to aluminium frame exc 0.50 sqm complete all as specified and as directed.

M&L for precast cement concrete block massonry with solid blocks exc 10 cm in width and settings in CM 1:6 type C1 1:3:6 (20mm graded aggregate) complete all as specified.

M&L for precast cement concrete block massonry with solid blocks nexc 10 cm in width and settings in CM 1:4 type C1 1:3:6 (20mm graded aggregate) complete all as specified.

M & L 75mm thick PCC 1:4:8 type D2 as in subfloors finished even and rough without using extra cement complete all as specified and as directed.

M&L for non skid ceremic white tiles 7 to 8mm thk area of each tile exc 0.18 sqm but n exc 0.36 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to mortar laid over and including15 mm thick cement screed bed in CM 1:6 complete all as specified

M&L for Non Skid coloured Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tile colour including Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in CM (1:6). complete all as specified and directed.

M&L for non skid ceremic white tiles 7 to 8mm thk area of each tile exc 0.06 sqm but n exc 0.11 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to mortar.Laid over and including15 mm thick cement screed bed in CM 1:6 complete all as specified and as directed.

M&L for vitrified tiles darkshade (square /rectangular) polished area of each tiles not exc 0.36 sqm in floors laid over and incl. 20mm thk CM (1:6) screed bed jointed pointed with coloured cement to match the tiles complete all as specified and as directed..

All as Per Item no 94 above but in vertical surfaces such as skirting / dado laid over and incl. a backing coat of 10mm thk CM 1:4 complete all as specified

M & L for glazed ceramic Coloured Tile 300 x 250 x 7mm/ 300x450x7mm/300x600x7 mm thick in Skirting, Dados, etc., Set and Jointed in Neat Cement Slurry and Pointed in White or Colour Cement to match laid over a backing coat of 10mm thick CM 1:4 screed, complete all as specified and as directed.

M&L for 18/20mm thk granite slab ( as in table top rubbed and polished) as in counter basin fixed in CM 1:4 , pointing in white cement 1:2 using granite dust with admixture of pigment to match complete all as specified and as directed.

Labour only for chamfer , splays or arris in facework of Granite not exc 15mm wide complete all as specified and as directed.

Taking down cement plaster on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

M&L for rendering 15mm thick on fair faces of brick or concrete work in CM 1:4 and mixing with WPC @ 3% by weight of cement finished even and smooth without using extra cement complete all as specified and as directed. Note : WPC shall be measured and paid separtely.

Supply only Integral waterproofing compound complete all as specified and as directed.

M&L for rendering 15mm thick on fair faces of brick work in CM 1:6 finished even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering 15mm thick on fair faces of brick work in CM 1:4 finished even and smooth without using extra cement complete all as specified and as directed.

S&F in repair vitreous china wash down water closet padestral patern EWC ,white, including trap set, seat cover and conection to trap, flushing pipe, etc. complete including making good to floor fixing bolt all as specified and directed.

S&F in repair Vitreous china squatting pan, 'Orissa' pattern, size 580 X 440 mm white, with integral foot rests including provision of lime concrete bedding, fixing of flushing cistern all as specified and directed

S & F in repairs Towel rack 600mm long with lower hangers , stainless steel of make Jaguar Cat Part No:-AKP-35781PS or equivalent in Marc/Parryware/Prayag

S&F in repairs vitreous China clay table top WHB of make Jaguar Cat Part No:-ARS-WHT-39903 size 700x435x135 mm incl waste coupling of Cat Part No:-ALD-727 complete or equivalent in Hindware/Cera/Parryware

S&F in repair fancy type tall body with 155 mm extension body fixed spout without popup waste system with 600 mm long braided hoses of make Jaquar Cat Part No:- KUP-35005BPM or equivalent in Marc/Parryware/Prayag

S&Fin repairs 15 mm bore CP health Foucet cock with Flexible pipe 1 m long of make Jaguar Cat Part No:ALD-565 or equivalent in Marc/Parryware/Prayag

S&F in repairs CP Soap dish holder of make Jaguar Cat Part No:-AKP-35731P or equivalent in Marc/Parryware/Prayag

S&F in repairs Toilet roll holder with stainless steel flap of Make Jaguar Cat Part No:- AKP-35753PS OR EQUIVALENT IN Marc/Parryware/Prayag

S&F in repairs Towel ring squre shape stainless steel of Make Jaguar Cat Part No:-AKP-35721P or equivalent in Marc/Parryware/Prayag

S&F in repairs corner glass shelf with bracket of make Jaguar Cat Part No:CAN-1173 or equivalent in Marc/Parryware/Prayag

S&F in repairs CP over head shower square shape of size 150x150mm of make Jaquar cat part No:OHS-CHR-1619 with CP shower arm of size 400x25x25 mm square shape for wall mounted showers flange of make Jaquar Cat partNo-SHA-455L400 or equivalent in Prayag/Hindaware/parryware

S&F in repairs CP single lever wall mixer 3-in-1 system with provision for bath hand shower & overhaed shower complete with 115 mm long bend pipe connecting legs & wall flange (without hand & ober head shower) of make Jaquar cat part No:OPP-15125PM or equivalent in Parryware/Prayad/Hindware

S&F in repairs Brass CP angular stop cock fancy type with Capstan heads of make Jaguar/Marc/Parryware

S&F in repairs Brass chromium plated bottle traps 32 mm dia for wash basins with inlet and outlet screwed for pipe or connections incl necessary packing uniun and cap and fixed complete all as specified and as directed.

M&L 75mm dia PVC(SWR)floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed.

M&L for 110 mm PVC (SWR) pipes single socketed in any length with rubber ring joints ,laid in trenches or in floors complete all as specified and as directed.

M&L for 75 mm PVC (SWR) pipes single socketed in any length with rubber ring joints ,laid in trenches or in floors complete

S&F PVC (SWR) bends 110mm dia complete all as specified and as directed

S&F PVC (SWR) bends 75mm dia complete all as specified and as directed

S&F PVC(SWR) 75mm dia vent cowls complete all as specified and as directed.

S&F PVC (SWR) 110mm bore bends any radius with access door complete all as specified and as directed.

S&F PVC (SWR) 75mm bore bends any radius with access door complete all as specified and as directed.

S&F Stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays ,incl bolts and nuts and securing ends of stays to wall or roof complete all as specified and as directed.

S&F PVC Connections 15mm size with PTMT Nuts of length 450mm and fixed, complete all as specified and as directed.

Supply and Laying Steel Water Tubing 15mm dia (Bore), Galvanised, ‘Medium Grade’ with all Fittings, fixed on Walls, Ceiling or laid in Floors or any other Situation, complete as all specified and as directed.

All as per Item 129 above , but for 20mm dia (Bore).

S&F cutting chases, pinning in concrete block workmaking good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades shelves, lintels etc, and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exc 10cm girth complete all as specified and as directed.

M&L for preparation of new wall surface and applying two finishing coat of cement base paint complete all as specified and as directed.

M&L for preparation of new wall surafces and applying two finishing coat of oil bound distempering over 1mm of wall care putty complete all as specified and as directed.

M&L for preparation of new wall surface and applying two finishing coat of acrylic emulsion paint , anti fungal resistancr , dirt resistance exterior paint of required shade including primer coat on new surfaces complete all as specified and as directed.

M&L for complete removal of existing wall treatment surface and applying two finishing coat of acrylic emulsion paint , anti fungal resistance , dirt resistance exterior paint of required shade including thin layer of wall care putty on wall surfaces complete all as specified and as directed.

Complete removal of existing treatment on old wall surfaces and applying two finishing coat of oil bound distempering over 1mm of wall care putty complete all as specified and as directed.

S&F in repairs 20 mm dia harrison rails, chromiun plated with wooden finished fancy type with fixing brackets stops , rollers etc all as directed and specified.

S&F in repairs 20 mm dia double rod brackets stops , rollers etc wooden finished all as directed and specified.

S&F framed work such as grills, gratings etc with ends of bars shouldered or riveteted or foged into spikes, framed guard bars conforming to FE 290 Gde E-165 complete all as specified and directed.

M&L for preparation of new steel surfaces of any description not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint primer all as specified and as directed.

M&L for preparation of new surfaces of wood and wood based materials of any description not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint over a coat of pink primer all as specified and as directed.

M&L for preparation of old surfaces of wood and wood based materials of any description not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint primer all as specified and as directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for incl (reinforcement cut as reqd to facilitate demolition) complete all as specified and as directed.

E&M SCHEDULE PART - II Taking down carefully copper/aluminum point wiring light/fan/sockets out let/power point complete (fittings such as switches, sockets, ceiling rose, pendent holders, light fittings etc. are to be measured separately) and/or drawing out from existing conduit/batten and making good disturbed surface of walls/floors/ceiling, complete all as specified.

Material and labour for Point wiring with 1.50 Sqmm single core PVC insulated , unsheathed cable FRLS, 1100 volt grade with multi stranded copper conductor drawn through and incuding medium grade, ISI marked, in PVC Casing capping on wall/ceiling and incuding provision of 1.50 Sqmm single core PVC insulated , unsheathed cable FRLS, 1100 volt grade with multi stranded copper conductor green colour as earth continuity conductor and connected to common earth dolly with suitable size of lugs, including mild steel sunken box/metal flush box with suitable steel terminal boxes made out of 1.6 mm thick mild steel sheet metal conforming to IS-5139(pt-I) of 1969 and IS:14772-2000 with earth dolly and coated with two coats of anti corrosive paint over a coat of red oxide primer both internally and externally including provision of new 3 mm thick plastic laminated sheet top cover for housing the switches , socket outlets, fan regulators etc. with brass screws and brass washers and making good the disturbed surfaces as per existing for one light point controlled by one switch. Note :- Switch, socket and fan regulators to be measured and paid for separately .

All as per items No 145 above but for socket outlet point 5 Amp on same board.

All as per items No 145 above but for socket outlet point 5 Amp on Independent board.

All as per items No 145 above but with 4 sqmm cable for 3 pin 15 Amps switch socket outlet (Power point) complete all as specified.

Supply and fix switch piano (ISI marked) Single pole 240 volts, 5Amps all as specified and directed. Make- Havells/anchor/ Legrand.

Supply and fix socket (ISI marked) 2/3 pin and 5 Amps, flush type, 240 volts complete all as specified and as directed. Make- Havells/anchor/ Legrand.

Supply and fix switch socket combination (ISI marked) 2/3 pin and 5/15 Amps, flush type, 240 volts complete all as specified and directed. Make- Havells/anchor/ Legrand.

Supply and fixing ceiling rose surface bakelite 65x50mm, 3 terminal complete all as specified. Make : Cona , Plaza, Anchor .

Supply and fixing LED batten fittings 1x18 Watt complete pre wired fixed to wall with 2 nos PVC block of suitable size including taking down old unserviceable one complete all as specified and as directed.

S & F wall mounted LED batten fittings with all accessories 1X 9 Watt LED / foot light 6000K , extruded polycarbonate, integrated electronic driver and fixed to wall with 2 Nos PVC block suitable size complete all as specified and as directed including taking down old unserviceable light fittings complete all as specified and as directed.

S & F wall light fitting (Florette) Alabaster glass for diffured light effect, recommended to use with energy saving lamp and synchonised design concept with 4 watt complete with necessary connection compelete all as specified and as directed Make- Havells Item code- LHFOAIC1TZ11010

Supply and fixing of hot water Geysers of 25 ltrs capacity 5 star rated vertical type includng fixing of bolts , nuts grouted into the wall , and necessary cement work , making good of disturbed surface of wall , giving electric and water connection and testing after installation complete all as specified and as directed. Make : Havells cat part no - GHWCAMTWH025 : /LG/Ronald.

S&F heat resistant PVC connection pipe for hot and cold water 450mm long 15mm dia complete all as specified and as directed. Make: Prayag or equivalent in Polytuf/ Havells/ Sona.

S & F Exhaust fan 230 volts , 250mm,plastic body including making all electric connection complete all as specified and as directed including cutting of hole on wall and makng good disturbed surface of wall and outer wooden box for fan fix on wall complete all as specified and as directed. Make Bajaj/Havell's/CG.

Supply and fixing LED security Building light LED 25 Watt , pressure die cast aluminum housing, heat resistant glass, IP65 protection, better optics for uniform distribtion complete with all accessories internally pre wired and including connecting up with three core 1.5 sqmm flexible copper conductor cable from ceiling rose to connector of light including taking down old one complete all as specified and as directed.Make Make:- Bajaj Cat part No- 169821 LED/CG as perr vat No LSTO 25 CDL equivalent model as in Surya / havells .

Supply and fix in repairs MCCB DB 4 way vertical sheet metal enclosure TPN 415 volts, 50 Hz, with IP-43 protection, double door with 200 Amps standard bus bar of suitable size and common neutral link all enclosed in standard sheet flush mounting complete including incomer 100 Amps MCCB 4 pole all as specified. . (Note : MCB SP/TPN shall be measured and paid seperately under appropriate items of this schedule . Note : Copper thimble shall be used for connection of cable .

Supply and fix MCB Distribution board , 240 volts single pole and neutral ,double door, sheet steel, enclosure powder coated with 100 Amps rated busbar with neutral link, 12 ways , fixed on wall duly grouted in solid block wall or on wooden board with electrical connection, including taking down old one complete all as specified and directed. Make: Havells Cat part No DHDPSHODRW12 or equivalent in Schnieder/GE/C&S.

Supply and fix MCCB TPN, 240 Volts, 40 to 63 Amps, 10 kA rupturing capacity415 Volts complete all as specified and directed including taking down old one.

Supply and fix MCB DP, 240 Volts, 40 Amps, 10 kA rupturing capacity 'C' series complete all as specified and directed including taking down old one. Make: Havells Cat part No - DHMCCDPF006-032 or equivalent in Schnieder/GE/C&S.

Supply and fix in repairs MCB, single pole 240 volts 6 to 32 Amps capacity fixed in DB's.Make : Hager as per cat part- NCN106N, Schneider as per cat No : A9N4P32C or Indoasian as per cat No : 81195.

M & L for sub main wiring with two runs of single core 6 Sqmm FRLSH copper conductor cable PVC insulated, unsheathed, 1100 V including PVC Cassing capping, medium grade ISI marked with all accessories such as Tees, elbows, junction boxes etc, as required fixed on wall alongwith one run of 6 Sqmm single core PVC FRLSH insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board / distribution board and testing on completion inculding taking down old wiring etc complete all as directed.Note: (i) Two runs of 6 sqmm as PVC cable and one run of 6 sqmm cable as earth wire and one run of PVC cassing / capping shall be measured as one RM. (ii) Cutting of chases in the wall of appropriate size shall be carried out with electric cutter machine . (iii) Necessary plastering in the disturbed surface of wall and distempering /white washing to match the existing colour shall be included in the unit rate quoted.

M & L for sub main wiring with two runs single core 4 Sqmm FRLSH copper conductor cable PVC insulated, unsheathed, 1100 V including PVC Cassing capping ISI marked with all accessories such as Tees, elbows, junction boxes etc, as required fixed on wall alongwith one run of 4 Sqmm single core PVC FRLSH insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board / distribution board and testing on completion inculding taking down old wiring etc complete all as directed.Note: (i) Two runs of 4 sqmm as PVC cable and one run of 6 sqmm cable as earth wire and one run of PVC casing / capping shall be measured as one RM.

Supply lay/spread in trenches , river sand ,clean ,including spreading ,levelling ,punning for laying /cushioning of cables all as specified and as directed.

Supply lay in trenches fly ash bricks, old size sub class “B” for cable protection complete all as specified and as directed.

Supply, lay in trenches, floors ,fix on wall/pole, passing through pipes etc.,LT UG cable , 1100 volts grade, PVC/ XLPE insulated , with multistranded aluminium conductors, armoured with galvanised steel wire or tape ,gland, lugs etc , of size 16 Sq.mm 4 core , confirming to IS specifications complete all as specified and as directed.

Supply, lay in trenches, floors ,fix on wall/pole, passing through pipes etc.,LT UG cable , 1100 volts grade, PVC/ XLPE insulated , with multistranded aluminium conductors, armoured with galvanised steel wire or tape ,gland, lugs etc , of size 10 Sq.mm 2 core , confirming to IS specifications complete all as specified and as directed.

S&F Three Phase street light time switch distribution board consisting with 32 Amps 3 pole power contactor and Analogue time switch including taking down old unserviceable time switch complete all as specified and as directed. Make : Indo Asian cat. No. TL032ABO or equivalent model from Make:- Legrand /BCH.

M&L for PVC Cable of Three core 2.5 Sq.mm size PVC insulated , un sheathed , multi stranded aluminum conductor cables in 20 mm PVC conduit including clamp and connecting up to street light fitting .Make- Havells/ Polycabe/KEI

Supply, Fabricating and fix street light bracket made out of 25mm bore galvanized steel tubing, light grade, 1.5m long, bent to shape as required, fixed to Building with suitable MS clamp (made out of 25x6mm flat iron) and MS bolts, nuts and washer complete.

Supply & fixing factory made IP-65 (Dust and power jet proof according to IEC60529) transparent street light junction box of size 120 X 70 H made of high quality polycarbonate (shock proof, rust free, corrosion free acid and chemical resistant , fire retardant , fire retardant having high impact (IK 08) totally insulated, UV resistant ) having high grade gasket made of polyurethane with two cable gland for cable size 10 sqmm etc and fixing on pole with MS flat iron of size 20X3mm with necessary nut & bolts complete all as specified and directed Make:Hensel Cat No K9105 or equivalent in Sentex

Materials and labour for Steel tubular swaged pole complete with cast iron base plate, finial taper plug, bolts, nuts and screws as specified type 410 SP-22 (9 m long) conforming to IS-2713 (Part-I & II) including painting of pole with two coats of aluminium paint over a coat of red oxide zinc chrome primer from top of the pole to 1.5m above the bottom of the pole and painting with two coats of black bituminous paint over a coat of red oxide zinc chrome primer upto 1.5m from bottom of the pole including numbering of poles as directed complete all as specified and directed.

Material and labour for earthing complete with galvanised steel earth plate electrode 60 Cm X 60 Cm X 6 mm buried directly in ground vertically to a depth notless than 2.25 mtr deep below ground level with top edge of earth plate at a depth not less than 1.5 m below normal ground level connected to galvanised earth lead wire 4.0 mm dia by means of bolts, check nuts and washers ,galvanised steel and protected by GI pipe 15 mm bore light grade & connected to main switch board or main control board as directed and including concrete pit in PCC (1:3:6) type C1, precast RCC (1:2:4) type B1 cover slab 30 cm X 30 cmX 5 cm with 10mm dia TMT bars 8 cm C/c both ways and one handle for lifting made out of 8 mm dia TMT bar, funnel, wire mesh, 20mm bore galvanised iron pipe (medium grade) for watering, charcoal or coke and salt in alternative layers, necessary excavation and earth work in any type of soil and including necessary testing complete all as shown in Electrical Plate No 3 of SSR part -I.

Material and labour for Point wiring with 1.50 Sqmm single core PVC insulated , unsheathed cable FRLSH, 1100 volt grade with multi stranded copper conductor drawn through and incuding medium grade, ISI marked, PVC conduit not less than 20 mm dia with accessories, concealed on wall/ceiling and incuding provision of 1.50 Sqmm single core PVC insulated , unsheathed cable FRLSH, 1100 volt grade with multi stranded copper conductor green colour as earth continuity conductor and connected to common earth dolly with suitable size of lugs, including mild steel sunken box/metal flush box with suitable modular or pressed steel terminal boxes made out of 1.6 mm thick mild steel sheet metal conforming to IS-5139(pt-I) of 1969 and IS:14772-2000 with earth dolly and coated with two coats of anti corrosive paint over a coat of red oxide primer both internally and externally including provision of new 3 mm thick plastic laminated sheet top cover for housing the switches , socket outlets, fan regulators etc. with brass screws and brass washers and making good the disturbed surfaces as per existing for one light point controlled by one switch. Note :- Switch, socket and fan regulators to be measured and paid for separately . PVC Conduit confirming to IS 9537 part I & III Note (All chases will be cut by chase cutter only) AMke of Cable - KEI/ Havells / Kalinga

All as per item No.177 above but for socket outlet point 5 Amp on same board.

All as per item No.177 above but for socket outlet point 5 Amp on Independent board.

All as per item No.177 above but with 4 sqmm cable for 3 pin 15 Amps switch socket outlet (Power point) complete all as specified.

Supply and fixing modular switch 1 way 6 A module 230/250 volt , AC supply, ISI Marked, with white cover plate with frame complete all as specified and directed. Make : Cona , Plaza, Anchor, Vinay

Supply and fixing modular switch 1 way 16 A module 230/250 volt , AC supply, ISI Marked, with white cover plate with frame complete all as specified and directed. Make : Cona , Plaza, Anchor .

Supply and fixing modular sockets 6A 2/3 pin combined 2 module 230/250 Volts, 50 Hz , AC supply, ISI Marked, with white cover plate with frame complete all as specified and directed. ake : Cona , Plaza, Anchor, Vinay

Supply and fixing modular sockets 6A/16A 2/3 pin combined 2 module 230/250 Volts, 50 Hz , AC supply, ISI Marked, with white cover plate with frame complete all as specified and directed. ake : Cona , Plaza, Anchor, Vinay

Supply and fixing LED lights fitting 1x 18W, 220V,AC decorative box type, warm white / white type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete complete pre wired fixed to wall with 2 nos PVC block of suitable size complete all spcifided and directed.

S & F Mirror wall mounted LED batten fittings with all accessories 1X 12 Watt LED 6000K , extruded polycarbonate, integrated electronic driver and fixed to wall complete all as specified and as directed Make- Philips cat Part 31403 12-Watt LED picture Light (Gold)

S & F Exhaust fan 230 volts , 300mm,plastic body including making all electric connection complete all as specified and as directed including cutting of hole on wall and making good disturbed surface of wall and outer wooden box for fan fix on wall complete all as specified and as directed. Make Bajaj/Havell's/CG.

Supply and fix MCB Distribution board , 240 volts single pole and neutral ,double door, sheet steel, enclosure powder coated with 100 Amps rated busbar with neutral link, 12 ways , fixed on wall duly grouted in solid block wall or on wooden board with electrical connection, complete all as specified and directed. Make: Havells Cat part No DHDPSHODRW12 or equivalent in Schnieder/GE/C&S.

Supply and fix MCB DP, 240 Volts, 40 Amps, 10 kA rupturing capacity 'C' series complete all as specified and directed

Supply and fix MCB, single pole 240 volts 6 to 32 Amps capacity fixed in DB's complete all as specified and as directed.

S&F 15mm bore bib taps, chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule all as specified and directed.

S&F 15 mm bore angle stop valve cast copper alloy, chromium plated screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixing of size 15mm complete all as specified and as directed.

S & F single pole and neutral enclosure with a two pin and earth plug and socket with one single pole MCB complete all as specifided and as directed

M & L Sub main wiring with two runs of single core 6 Sqmm FRLSH copper conductor cable PVC insulated, unsheathed, 1100 V including 20 mm dia concealed on wall/ceiling in PVC conduit, medium grade ISI marked with all accessories such as Tees, elbows, junction boxes etc, as required fixed on wall along with one run of 6 Sqmm single core PVC FRLSH insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board / distribution board and testing on completion including taking down old wiring etc complete all as directed. Note: (i) Two runs of 6 sqmm as PVC cable and one run of 6 sqmm as earth wire and one run of PVC conduit shall be measured as one RM. (ii) Cutting of chases in the wall of appropriate size shall be carried out with electric cutter machine . (iii) Necessary plastering in the disturbed surface of wall and distempering /white washing to match the existing colour shall be included in the unit rate quoted.

S & F Wall bracket decorative LED fitting 2 light opal glass with chrome finishing warm white /white type with lamp 12 Watt complete with necessary connection complete Make- Jaquar Cat part KCH-CHR-MB160275532B

S & F Exhaust fan 230 volts , 300mm, heavy duty steel body including making all electric connection complete all as specified and as directed including cutting of hole on wall and making good disturbed surface of wall and outer wooden box for fan fix on wall including taking down old one Make Bajaj/Havell's/CG.

Supply and fixing LED security Building light LED 25 Watt , pressure die cast aluminum housing, heat resistant glass, IP65 protection, better optics for uniform distribtion complete with all accessories internally pre wired and including connecting up with three core 1.5 sqmm flexible copper conductor cable from ceiling rose to connector of light complete.Make Make:- Bajaj Cat part No- 169821 LED/CG as perr vat No LSTO 25 CDL equivalent model as in Surya / havells .

S & F Slim design LED recessed round/square type down lighter 12 watt warm white / white type flat panel PDC aluminium housing and PMMA diffuser including all as directed and specified Make- CG Cat Part No- LCDEP-12-WW

S & F recesss mounted low glare luminaire 28 Watt PLUTO NEO 2 X 2 complete warm white / white with all accessories including taking down old unserviceable one complete all as specified and as directed. Make HAVELLS /Philips/Bajaj/CG

S&F lamp holder, insulated body, with back plate for batten fitting complete all as specified and as directed. Make- Havells/anchor/Legrand.

M & L Sub main wiring with two runs of single core 4 Sqmm FRLSH copper conductor cable PVC insulated, unsheathed, 1100 V including 20 mm dia concealed on wall/ceiling in ISI marked with all accessories such as Tees, elbows, junction boxes etc, as required fixed on wall alongwith one run of 4 Sqmm single core PVC FRLSH insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board / distribution board and testing on completion inculding taking down old wiring etc complete all as directed.Note: (i) Two runs of 4 sqmm and one run of 4 sqmm cable and one run of PVC conduit shall be measured as one RM.