Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹10.0 LAccepted-AOC | L1 | Accepted-AOC lowest | |
| 2 | L2₹11.1 L+₹75,000 (7.25%)Rejected-AOC | L2 | Rejected-AOC not found lowest | |
| 3 | L3₹11.4 L+₹1.0 L (10.1%)Rejected-AOC | L3 | Rejected-AOC not found lowest |
Tender Value
Refer Docs
EMD Value
₹28,000
Closing Date
17 Nov 2022, 6:00 pmClosed
GE Basoli
GE Basoli PO lakhanpur Distt Kathua JK
REPAIR /MAINT and POLISHING OF ALL TYPE OF WOODEN FURNITURE FOR BASOLI and JANGLOT AREA AT BSO YARD UNDER GE BASOLI JK
2022_MES_559113_1
GE/BAS-62/2022-23
Open Tender
Civil Works
Item Rate
270 days
Area of Basoli and Janglot
class E catg d(I)
7 documents required · 7 mandatory
₹500
Yes
GE Basoli
₹28,000
Yes
2 Jan 2023
22 Oct 2022
19 Nov 2022
22 Oct 2022
17 Nov 2022
4 Nov 2022
Amount
REPAIRS TO TABLE 3' X 2' WITH / WITHOUT DRAWER STEEL (FD-1007 & FD-1008) :-( For Serial item No 01 to 07) Material and labour for replacement of top of table 3’ X 2’ with / without drawer steel with 18/19 mm thick MDF board (exterior grade) ISI marked both side commercial over with 1mm thick laminated sheet ( Shade and texture natural teak) shall be fixed with synthetic rubber adhessive of make Fevicol or Pidilite 4 mm thick half round teak wood edging all round shall be fixed to the frame all as per drawing including Taking out old top & all as specified and directed.
Material and labour for replacement of damaged legs by 25 mm square tube of wall thickness 1.6 mm and welding complete all as per shown on drawing complete all as specified and directed
Material and labour for repair/replacement damaged drawer of table made out of 1 mm thick MS black sheet including making shape, welded with gas welding shown on drawing complete all as specified and directed
Material and labour for replacement of unserviceable lock of drawer of table (Make-Link, Harrison) shown on drawing complete all as specified and directed.
S & F new chromium plated recessed handle for drawer of table 3feetx2feet steel of approved quality complete all as specified and directed
Material and labour for preparation of surface and welding to broken place complete all as specified and directed
Material and labour forr replacement of hard rubber shoe of black colour , complete all as specified and directed
Material and labour for preparation of steel surfaces and filling cavities with putty including scrapping out old painted surface (external and internal) of Table 3*2 and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer by spray painting complete all as specified and directed. Painting shall be done in dual tone for drawer & Frame ( OG/smoke gray & whites) complete all as specified and directed
REPAIRS TO TABLE OFFICE CLERK STEEL, FD-1004,381 ( For Srl Item No 9 to 16) Material and labour for replacement of top of table office clerk steel of size 1160 mm x 570 mm with 18/19 mm thickMDF board (exterior grade) ISI marked both side commercial over with 1mm thick laminated sheet ( Shade and texture natural teak) shall be fixed with synthetic rubber adhessive of make Fevicol or Pidilite 4 mm thick half round teak wood edging all round shall be fixed to the frame all as per drawing including Taking out old top & complete all as specified and directed.
Material and labour for repair/replacement damaged drawer of table made out of 1 mm thick MS black sheet including making shape & repair of sliding plate, welded with gas welding as shown on drawing complete all as specified and directed.
Material and labour for replacement of unserviceable lock of drawer with new lock of 6 Lever 65 mm of approved quality with duplicate key complete all as specified and directed.
S & F new chromium plated recessed handle for drawer of table office clk steel of approved quality complete all as specified and directed.
Material and labour for replacement of old keyhole cover with new chromium plated key hole cover of approved quality fixed with two screw complete all as specified and directed.
Material and labour for preparation of surface and welding to broken place complete all as specified and directed.
Material and labour for replacement of hard rubber shoe of as per existing colour as approved complete all as specified and directed.
Material and labour for preparation of steel surfaces and filling cavities with putty including scrapping out old painted surface (external and internal) of Table office clk steel and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer by spray painting complete all as specified and directed .Painting shall be done in dual tone for drawer & Frame ( OG/smoke gray & whites) complete all as specified and directed.
REPAIRS TO TABLE OFFICE OFFICER STEEL – FD-1003,84 ( For Srl Item No 17 to 26) Material and labour for replacement of top of table office officer steel of size 1680mm x 870mm with 18/19 mm thick MDF board (exterior grade) ISI marked both side commercial over with 1mm thick laminated sheet ( Shade and texture natural teak) shall be fixed with synthetic rubber adhessive of make Fevicol or Pidilite 4 mm thick half round teak wood edging all round shall be fixed to the frame all as per drawing including Taking out old top & complete all as specified and directed.
Material and labour for replacement of damaged drawer of table made out of 1 mm thick MS black sheet including making shape, welded with gas welding as shown on drawing complete all as specified and directed
Material and labour for replacement / repair of damaged box complete with locking arragements of table made out of 1 mm thick MS black sheet including making shape, welded with gas welding as shown on drawing complete all as specified and directed.
Material and labour for replacement of damaged shutter door of box complete with locking arrangements of table made out of 1 mm thick MS black sheet including making shape, welded with gas welding as shown on drawing complete all as specified and directed.
Material and labour for replacement of unserviceable lock of drawer with new lock of 6 Lever 65 mm of approved quality with duplicate key.as shown on drawing complete all as specified and directed.
S & F new chromium plated recessed handle for drawer of table office clk steel of approved quality complete all as specified and directed
Material and labour for replacement of old keyhole cover with new chromium plated key hole cover of approved quality fixed with two screw complete all as specified and directed.
Material and labour for preparation of surface and welding to broken place complete all as specified and directed.
Material and labour for replacement of hard rubber shoe of black colour as per existing as approved.as shown on drawing complete all as specified and directed.
Material and labour for preparation of steel surfaces and filling cavities with putty including scrapping out old painted surface (external and internal) of Table office clk steel and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer by spray painting complete all as specified and directed . Painting shall be done in dual tone for drawer & Frame ( OG/smoke gray & whites) complete all as specified and directed
Table Computer FD/E6/MAP/03 (For Srl Item No 27 to 34 )Material and labour for table top made of 18mm thick prelaminated particle board exterior grade with 4 mm thick beading alround the top, complete all as shown on drawing and complete all as specified and directed
Material and labour for 18mm thick prelaminated particle board as use in key board tray of computer table with 4 mm thick beading alround the tray and telescopic channels fixed with screw.complete all as shown on drawing and complete all as specified and directed
Material and labour for 18mm thick prelaminated particle board key as use in drawer of computer table with 4 mm thick beading alround the tray and telescopic channels and fancy type Knob fixed with screw.complete all as shown on drawing and complete all as specified and directed
Material and labour for 18mm thick prelaminated particle board as use in board pull out tray of computer table with 4 mm thick beading alround the tray and telescopic channels fixed with screw.complete all as shown on drawing and complete all as specified and directed
Material and labour for 18mm thick prelaminated particle board as use in middle shelf of computer table with 4 mm thick beading alround the middle shelf fixed with screw.complete all as shown on drawing and complete all as specified and directed.
Material and labour for 18mm thick prelaminated particle board as use in vertical shelf of computer table with 4 mm thick beading alround the shelf fixed with screw.complete all as shown on drawing and complete all as specified and directed.
Material and labour for 18mm thick prelaminated particle board as use in bottom shelf of computer table with 4 mm thick beading alround the shelf fixed with screw.complete all as shown on drawing and complete all as specified and directed.
Material and labour for replacement of hard rubber shoe of black colour as per existing as approved.as shown on drawing complete all as specified and complete all as specified and directed.
Chair Computer/ Chair Executive Revolving (TP) (For Srl Item No 35 to 39 )Material and labour for taking out unserviceable pedestal assembly and caster wheel(Twin) of chairs and supply fixing new chromium plated steel pedestal assembly as per existing size, shape and pattern and complete all as specified and directed.
Material and labour for taking out unserviceable Gas lift pneumatic system cylinder and assesory of chair computer and supply fixing new all as per existing size, shape and pattern complete all as specified and directed.
Material and labour for taking out unserviceable PVC arm 02Nos of chair computer and supply fixing new all as per existing size, shape and pattern complete all as specified and directed.
Material and labour for taking out unserviceable Tapestry cloth of Seat PU foam cushion and supply and fixing new tapestry cloth and PU foam cushion of approved qulality with PVC lapping all around including new hot pressed plywood 12mm for back complete all as specified and directed
Material and labour for taking out unserviceable Tapestry cloth of back PU foam cushion and supply and fixing new tapestry cloth and PU foam cushion of approved qulality with PVC lapping all around including new hot pressed plywood 12mm for back complete all as specified and directed.
REPAIRS TO TEAPOY VERANDAH (FD-35 & other):- (For ser No 40 to 43) Material and labour for replacement of top of teapoy verandah with 18/19 mm thick MDF Borad (exterior grade) both side white face ISI marked and shall be fixed teak wood beading 4 mm thick all round the frame all as per drawing complete all as specified and directed. Make - Action Tesa, Kitply, Novapan
Material and labour for replacement of damaged legs by 19/20 mm square tube / conduit pipe of wall thickness 1.6 mm and welding complete all as per shown on drawing complete all as specified and directed.
Material and labour for preparation of surface and welding to broken place complete all as specified and directed.
Material and labour for replacement of hard rubber shoe of as per existing colour as approved complete all as specified and directed..
Chair Writing Steel cushioned:- (FD/E6/MAP/12)(For ser No 44 to48) Removing old UNSV PVC arm of Chair Writing MAP and supply fixing new PVC arm 2 Nos all as per existing size, shape and pattern complete all as specified and directed
Removing UNSV Tapestry cloth of seat PU foam cushion and supply and fixing new tapestry cloth and PU foam cushion of approved qulality with PVC lapping all around including new hot pressed plywood 12mm for seat complete all as specified and directed
Removing UNSV Tapestry cloth of back PU foam cushion and supply and fixing new tapestry cloth and PU foam cushion of approved qulality with PVC lapping all around including new hot pressed plywood 12mm for back complete all as specified and directed
Preparation of old steel surface of chair writing and applying one coat of black Japan paint complete all as specified and shown on drg complete all as specified and directed.
Material and labour for replacement of hard rubber shoe of as per existing colour as approved complete all as specified and directed..
REPAIRS TO CHAIR CB STEEL WITH ARM AND WITHOUT ARMS- FD-75 (M)( For Srl Item No 49 to 58 ) Material and labour for replacement for seat of chair CB steel with arms duly painted with two coats of synthetic enameled paint of black colour and 2mm wide 0.4 mm thick white plastic cane and fixed with chair frame with 04 Nos machine screw with washers of size 75mmx 3mm as shown on drawing complete all as specified and directed.
Material and labour for replacement for Back of chair CB steel with arms duly painted with two coats of synthetic enameled paint of black colour complete as per Godrej pattern with 2mm wide 0.4 mm thick white plastic cane and fixed with chair frame with 04 Nos machine screw with washers of size 75mmx 3mm as shown on drawing complete all as specified and directed.
Material and labour for replacement for seat of chair CB steel without arms duly painted with two coats of synthetic enameled paint of black colour and 2mm wide 0.4 mm thick white plastic cane and fixed with chair frame with 04 Nos machine screw with washers of size 75mmx 3mm as shown on drawing complete all as specified and directed.
Material and labour for replacement for Back of chair CB steel without arms duly painted with two coats of synthetic enameled paint of black colour and 2mm wide 0.4 mm thick white plastic cane and fixed with chair frame with 04 Nos machine screw with washers of size 75mmx 3mm as shown on drawing complete all as specified and directed.
Material and labour for Flat Iron stiffener of size 25mm x 3mm size, 500mm long fixed to frame by welding for fixing of seat and back of chair CB steel with arms as shown on drawing complete all as specified and directed.
Material and labour for Flat Iron stiffener of size 25mm x 3mm size, 420mm long fixed to frame by welding for fixing of seat and back of chair CB steel without arms as shown on drawing complete all as specified and directed.
Material and labour for replacement of PVC cap with new PVC cap for 20 mm dia pipe of approved quality of conduit frame of chair CB steelas shown on drawing complete all as specified and directed.
Material and labour for replacement of damaged arm of chair CB steel duly painted with two coats of synthetic enameled paint of black colour as shown on drawing complete all as specified and directed.
Material and labour for preparation of surface and welding to broken place complete all as specified and directed
Material and labour for preparation of steel surfaces and filling cavities with putty including scrapping out old painted surface (external and internal) of Chair CB steel and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer by spray painting complete all as specified and directed .
REPAIRS TO ALMIRAH LARGE STEEL ALL TYPES- FD-67M/1031 &1033 (for Item NO 59 to 69) Taking down old unserviceable lock of almirah large steel and supply and fixing new lock of suitable size provided with and fixed with screws with duplicate keys complete all as specified and directed
Material and labour fixed in repair/replacement for locking device with cover of almirah steel large including lock bar complete all as specified and directed.
Material and labour fixed in repair for door shutters by denting and necessary adjustment as required complete all as specified and directed.
Supply and fixing for new door shutters made out of 1 mm thick mild steel black sheet including taking down old unserviceable door shutters of almirah large steel complete all as specified and directed.
Supply and fixing for new chromium plated handle, fixed with screws incuding taking down old unserviceable handle of almirah large steel complete all as specified and directed.
Supply and fixing for new chromium plated key hole cover plate, fixed with screws incuding taking down old unserviceable key hole cover of almirah large steel complete all as specified and directed.
Supply and fixing for new legs made out of 1 mm thick mild steel black sheet including taking down old unserviceable legs of almirah large steel complete all as specified and directed.
Supply and fixing for new shelves made out of 1 mm thick mild steel black sheet made to shape including down old unserviceable shelves of almirah large steel complete all as specified and directed.
Material and labour for prepartion of welded steel surfacs of externally/ internally with putty ready for painting for denting to old chipped surfaces complete all as specified and directed.
Material and labour for prepartion of surfacs and welding to broken place complete all as specified and directed.
Material and labour for preparation of steel surfaces and filling cavities with putty including scrapping out old painted surface (external and internal) of Almirah Large Steel steel and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer by spray painting complete all as specified and directed .
REPAIRS TO ALMIRAH MEDIUM STEEL WITH SHELVE -FD-67M & FD-1032 &243 (For Srl item No 70 to 80) Material and labour for Supply and fixing new lock of suitable size provided with duplicate keys as per sample, fixed with screws including taking down old unserviceable lock of almirah medium steel complete all as specified and directed.
Material and labour fixed in repair/replacement of locking device with cover of almirah steel medium steel including lock bar complete all as specified and directed.
Material and labour fixed in repair for door shutters by denting and necessary adjustment as required complete all as specified and directed.
Supply and fixing for new door shutters made out of 1 mm thick mild steel black sheet including taking down old unserviceable door shutters of almirah medium steel complete all as specified and directed.
Supply and fixing for new chromium plated key hole cover plate, fixed with screws incuding taking down old unserviceable key hole cover of almirah large steel complete all as specified and directed.
Supply and fixing for new chromium plated handle, fixed with screws including ,taking down old unserviceable handle of almirah medium steel complete all as specified and directed.
Supply and fixing for new legs made out of 1 mm thick mild steel black sheet including taking down old unserviceable legs of almirah medium steel complete all as specified and directed.
Supply and fixing for new shelves made out of 1 mm thick mild steel black sheet made to shape including taking down old unserviceable shelves of almirah medium steel complete all as specified and directed.
Material and labour for prepartion of welded steel surfacs of externally/ internally with putty ready for painting for denting to old chipped surfaces complete all as specified and directed.
Material and labour for prepartion of surfacs and welding to broken place complete all as specified and directed.
Material and labour for preparation of steel surfaces and filling cavities with putty including scrapping out old painted surface (external and internal) of Almirah LargeMed/small Steel and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer by spray painting complete all as specified and directed .
REPAIRS TO LOCKER STEEL (FD-1029& 127)( For Srl Item No 81 to 89) Supply and fixing for new legs made out of 1 mm thick mild steel black sheet including taking down old unserviceable legs of locker steel complete all as specified and directed.
Material and labour for replacement for old damaged hasp and staples with new hasp and staples chromium plated safety type 100mm long of approved quality complete all as specified and directed.
Supply and fixing for new chromium plated handle set, 100 mm size of approved quality fixed with screws including taking down old unserviceable handle of locker steel complete all as specified and directed.
Material and labour for repairing of door shutters for denting and necessary adjustment as required complete all as specified and directed.
Supply and fixing for new locker steel door shutters made out of 1 mm thick mild steel black sheet including taking down old unserviceable door shutters of locker steel complete all as specified and directed.
Material and labour for prepartion of welded steel surfacs of externally/ internally with putty ready for painting for denting to old chipped surfaces complete all as specified and directed.
Supply and fixing for replacement of new chromium plated hanging rod of locker steel shape & size complete all as specified and directed.
Material and labour for prepartion of surfacs and welding to broken place complete all as specified and directed.
Material and labour for preparation of steel surfaces and filling cavities with putty including scrapping out old painted surface (external and internal) of Locker Bed side steel and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer by spray painting complete all as specified and directed .
Supply of new bucket shall be made of 1 mm thick GI sheet 340mm dia at top and 210 mm dia at bottom. Top of bucket shall have two nos bracket 50x65x3mm thick flat iron welded to bucket for holding 10 mm dia MS bar Handle.40mmx3mm MS flat iron rings shall be provided at bottom of bucket. all steel surface execpt GI sheet, shall be given 02 coats of aluminium paint over a coat of primer after preparation of surface complete all as shown on drawing and complete all as specified and directed
REPAIR TO TABLE DINING (ORS) (FD-165M):-(for Srl item No 91 to 94) Replacement of top of table dining for OR’s with 18/19 mm thick pre laminated Particle board (exterior grade)one side teak face ISI marked and shall be fixed teak wood beading 4 mm thick half round all round the frame all as per drawing,complete all as specified and directed. Make of board Bhutan Board,Kitply,Century.
Material and Labour for replacement of damaged legs 25 mm square tube of wall thickness 1.6 mm and welding complete all as per shown on drawing and complete all as specified and directed.
Material and Labour for replacement of short stiffener and short rail with 25 mm square tube of wall thickness 1.6 mm welded to frame complete all as per shown on drawing and complete all as specified and directed.
Material and Labour forr replacement of hard rubber shoe of black colour and match as per existing complete all as per shown on drawing and complete all as specified and directed.
CHARPOY GI PIPE WITH PLY TOP FD-220 & other: ( For Serial item No 95 to 101) Material and Labour for replacement of 12 mm thick Plywood top on existing charpoy GI pipe after tightening/ repairing of frame/charpoy . plywood shall be 12 mm thick, commercial type, BWR grade, ISI marked of Make : Century ply/ Archid ply / green ply/ Kit Ply in single piece with teak wood beading all around.Plywood shall be fixed to charpoy frame with and including nuts, bolts and GI washers (minimum 12 Nos. per charpoy), dia of bolt not less than 8mm complete all as specified and as directed.
Material and Labour for replacement stiffeners made of 25mm Sq MS Conduit pipe 1.6 mm thick and welded to long rail horizontally (one end to each long rail) at equal distance including drilling holes where ever required for fixing plywood with bolts and painting to Sq MS pipe pieces with two coats of black synthetic enameled paint over a coat of red oxide zinc chrome primer all as specified and as directed.
Material and Labour for replacement three way elbow, 32mm dia, heavy duty, ISI marked for GI pipe charpoy 8mm complete all as specified and as directed.
Material and Labour for replacement GI check nut hexagonal ISI marked, 32mm bore for GI pipe charpoy 8mm complete all as specified and as directed.
Material and Labour for replacement new long rail for charpoy GI Pipe of 32mm bore GI pipe medium grade (ISI marked) long rails threaded on both ends one side 22mm and other side 40mm complete all as shown on Drg 8mm complete all as specified and as directed. Drawing No FD-220
Cutting and fixing old unserviceable long rail of charpoy GI pipe 32mm and converted into short rail obtained from ser No 1.5 above and threaded both ends one side 22mm and other side 40mm complete all as shown on Drg 8mm complete all as specified and as directed. Drawing No FD-220
Cutting and fixing 32mm bore GI pipe for legs made out of unserviceable short rails obtained from ser No 1.6 and above as per drg including threading. S&F 50mm dia, 5mm thick MS washer at bottom of legs and S&F of MS clamps for FMN set complete all as shown on Drg and directed Drawing No FD-220.
CHARPOY TUBULAR STEEL JCOs (FD/MAP-II/01& all): (For ser No 102 to 104)Material and Labour for replacement of 12 mm thick Plywood top on existing charpoy tubular steel after repairing of frame/charpoy . plywood shall be 12 mm thick, commercial type, BWR grade, ISI marked of Make : Century ply/ Archid ply / green ply/ Kit Ply in single piece. Plywood shall be fixed to charpoy frame with and including nuts, bolts and screws complete all as specified in drawing and as directed.
Material and labour for replacement of head board of CHARPOY TUBULAR STEEL JCOs with new headboard of 18/19 mm thick PPB with beading fixed complete all around as shown in drawing as specified and directed .
Material and labour for preparation of steel surfaces and filling cavities with putty including scrapping out old painted surface of CHARPOY TUBULAR STEEL JCOs and applying coats of powder coating complete all as specified and directed .
REPAIR TO CHAIR DINING (FD-279, FD-228 & other) :- ( For Serial item No 105 to 114) Material and labour for replacement of damaged front leg of chair dining with well seasoned 1st class teak wood, all as per drawing and as specified and directed.
Material and labour for replacement of damaged rear leg of chair dining with well seasoned 1st class teak wood, all as per drawing and as specified and directed
Material and labour for replacement of damaged back rest of chair dining with well seasoned 1st class teak wood, all as per drawing and as specified and directed.
Material and labour for replacement of damaged stiffener of chair dining with well seasoned 1st class teak wood, all as per drawing and as specified and directed by the Engineer in Charge.
Material and labour for replacement of damaged side rail of chair dining with well seasoned 1st class teak wood, all as per drawing and as specified and directed.
Material and labour for replacement of damaged front rail of chair dining with well seasoned 1st class teak wood, all as per drawing and as specified and directed.
Material and labour for replacement of damaged back rail of chair dining with well seasoned 1st class teak wood, all as per drawing and as specified and directed.
Material and labour for preparation of surfaces by removing of old existing fade out polish from following wooden furniture by scrapping or with caustic soda and rubbed down by emery paper including filled up the cracks and pores with a paste and putty and applying two coats of French polish of approved quality/PFU with high gloss finish on exposed surfaces to view all as specified.
M&L for removing U/S plastic cane from various type of chairs and recanning with 2MM vide SHAH/PRIMIUM plastic cane incl porvn of plastic cane good quality as directed Boarder of chair shall be canning with 3 MM vide cane of Make SHAH/Primium quaity of Godreg pattern. Rest all as specified and shown on drg 8mm complete all as specified and as directed. .
Material and labour for supply and fixing of PVC shoes (04 Nos per chair) of chair dinning fixed to the legs with screw , all as per drawing and as specified and directed.
Replacement/Repair to following parts of Sofa Set 5 seater FD-1113:- ( For Serial item No 115 to 123) Supply of foam cushion of size 530 mm X 565 mm X 100 mm thick (32 high density) covered with tapesty cloth (not less than Rs.250/- per mtr cost of cloth) including stitchingwith one side Zip complete as per sample and all as directed. (Make : Sleepwell / Kurlon )
M & L for supply and fixing of Arm rest made of 1st class teak wood of size 35mmx70mm and shape & length as per drg 8mm complete all as specified and as directed. .
M & L for supply and fixing of front long rail made of 1st class teak wood of long piece (3 seater) of size 35mmx70mmx1730MM and shape & length as per drg 8mm complete all as specified and as directed. .
M & L for supply and fixing of back long rail made of 1st class teak wood of long piece (3 seater) of size 35mmx70mmx1730MM and shape & length as per drg 8mm complete all as specified and as directed. .
M & L for supply and fixing of front rail single seater made of 1st class teak wood of long piece of size 35mmx70mmx530MM and shape & length as per drg 8mm complete all as specified and as directed. .
M & L for supply and fixing of back rail single seater made of 1st class teak wood hard of size 35mmx70mmx530MM and shape & length as per drg 8mm complete all as specified and as directed. .
M & L for supply and fixing of legs made of 1 st class teak wood hard of size 70mmx35mmx530MM & shape& length as per drg 8mm complete all as specified and as directed. .
M&L for supply & fixing of wooden batten for long seat & Back size as per drg
Material and labour for preparation of surfaces by removing of old existing fade out polish from following wooden furniture by scrapping or with caustic soda and rubbed down by emery paper including filled up the cracks and pores with a paste and putty and applying two coats of French polish of approved quality/PFU with high gloss finish on exposed surfaces to view all as specified and as directed.
TABLE DRESSING LADIES FD-32,FD-251 etc:- ( For Serial item No 124 to 127) M & L forrepair/replacement of following partrs of Table Dressing Ladies ,complete all as spfd and as directed by Engr-in-Charge including french polishing with one or more coats :-(a) Box for Table Dressing Ladies of size 1200mm x 600mm made out of 18mm thick PPB exterior grade melamine faced. ISI marked with and including aluminium channel 12mm x 22mm all round 8mm complete all as specified and as directed. Make : Novapan / KITPLY / ACTION TESA or equivlant.
(c) Frame of size 1200mm x 365mm made of Sheesham wood, with & including back of 6mm thick ply wood ISI Marked commercial for looking mirror 8mm complete all as specified and as directed.
Material and labour for preparation of surfaces by removing of old existing fade out polish from following wooden furniture by scrapping or with caustic soda and rubbed down by emery paper including filled up the cracks and pores with a paste and putty and applying two coats of French polish of approved quality/PFU with high gloss finish on exposed surfaces to view complete all as specified and as directed.
REPAIR TO TABLE CENTRE (FD-274 & other) :- ( For Serial item No 128 to 133) Material and labour for replacement of table top with 18/19mm thick P/L Particle board (exterior grade) one side teak face, ISI Marked, incl 4mmthick half round teak wood beading shall be provided al-round the top of table. complete all as specified and as directed
Taking out broken legs of Table and supply and fixing new leg of required size made out of well seasoned 1st class teak wood, all as per drawing complete all as specified and as directed
Material and labour for replacement of damaged front rail of table with well seasoned 1st class Teakwood, all as per drawing and as specified and directed including taking out old front rail 8mm complete all as specified and as directed.
Material and labour for replacement of damaged side rail of table with well seasoned 1st class Teakwood, all as per drawing including taking out old side rail and as specified and directed
Taking out broken stiffener of table centre and supply and fixing new stiffener of required size made out of well seasoned 1st class teak wood, all as per drawing and as specified and directed.
Material and labour for preparation of surfaces by removing of old existing fade out polish from following wooden furniture by scrapping or with caustic soda and rubbed down by emery paper including filled up the cracks and pores with a paste and putty and applying two coats of French polish of approved quality/PFU with high gloss finish on exposed surfaces to view all as specified and as directed.
REPAIR TO TEA POY (FD-232 and FD-278) :- ( For Serial item No 134 to 139) Material and labour for replacement of table top with 18/19mm thick P/L Particle board (exterior grade) one side teak face, ISI Marked, incl 4mm thick half round teak wood beading shall be provided al-round the top of table. All as per drawing and complete all as specified and as directed.
Taking out broken legs of tea poy and supply and fixing new leg of required size made out of well seasoned 1st class teak wood, all as per drawing and complete all as specified and as directed.
Material and labour for replacement of damaged front rail of tea poy with well seasoned 1st class Teakwood, all as per drawing and complete all as specified and as directed.
Material and labour for replacement of damaged side rail of tea poy with well seasoned 1st class Teakwood, all as per drawing and complete all as specified and as directed..
Taking out broken stiffener of tea poy and supply and fixing new stiffener of required size made out of well seasoned 1st class teak wood, all as per drawing complete all as specified and as directed.
Material and labour for preparation of surfaces by removing of old existing fade out polish from following wooden furniture by scrapping or with caustic soda and rubbed down by emery paper including filled up the cracks and pores with a paste and putty and applying two coats of French polish of approved quality/PFU with high gloss finish on exposed surfaces to view complete all as specified and as directed.
Table Bed Side FD-248 & other :- ( For Serial item No 140 to 146) Taking out of un serviceable legs including fixing of new leg made of 1st class hard teak wood (MP) and equilant of size and shape , complete all as shown on drawing and complete all as specified and as directed.
Material and labour for taking out broken front/back rail of Table and supply and fixing new front rail of required size made out of well seasoned 1st class teak wood, complete all as shown on drawing and complete all as specified and as directed..
Material and labour for taking out broken side rail of Table and supply and fixing new side rail of required size made out of well seasoned 1st class teak wood, complete all as shown on drawing and complete all as specified and as directed.
Material and labour for taking out unserviceable back ply of Table bed side and fixing new back ply of 6 mm thick commercial type of required size , complete all as shown on drawing complete all as specified and as directed. ,Make:-Kitply,Duraply,Bhutan board.
Material and labour for taking out unserviceable Shelve of table and fixing new back shelve of 18/19mm thick prelaminated particle board , complete all as shown on drawing and complete all as specified and as directed. Make:-Kitply,Duraply,Bhutan board.
Material and labour for taking out Top/Bottem unserviceable board with hard wood beeding and fixing 18/19mm thick prelaminated particle board including hard wood beeding , complete all as shown on drawing and complete all as specified and as directed.Make:-Kitply,Duraply,Bhutan board
Material and labour for taking out unserviceable side board and fixing 18/19mm thick prelaminated particle board including hard wood beeding , complete all as shown on drawing and complete all as specified and as directed.Make:-Kitply,Duraply,Bhutan board.
Repair to table dining 6 person (FD/MAP-II/03 , FD-115 & FD 273) :- ( For Serial item No 147 to 152) Removing the following U/S parts of tables and supply and fixing with new parts as shown agisnt each :-(a) S&F in replacement of top to table dining 6 person made out of 18/19mm thick P/L MDF board (exterior grade confirming to IS standard one side teak finish and other side white laminated duly fixed with 4mm thick beading of teak wood all around the top after taking out old top.
(b) Supply & fixing in replacement of long rail to table dining 6 person made out of Teak wood
(c) Supply & fixing in replacement of short rail to table dining 6 person made out ofTeak wood
(d) Supply & fixing in replacement of legs to table dining 6 person made out of Teakwood
supply and fixing new H stiffener of required size made out of well seasoned 1st class teak wood, all as per drawing and complete all as specified and as directed.
Material and labour for preparation of surfaces by removing of old existing fade out polish from following wooden furniture by scrapping or with caustic soda and rubbed down by emery paper including filled up the cracks and pores with a paste and putty and applying two coats of French polish of approved quality/PFU with high gloss finish on exposed surfaces to view all as specified and complete all as specified and as directed.
Trastle store room wooden :- ( For Serial item No 153 to 158) Suply & Fixing for replacement of following parts of trustle store room wooden of size as shown on drawing including removing/taking of the old UNSV respective parts completes all as specified and as directed :- (a) Long rail made out of Ist class hard wood sheesham .
(b) Short rail made out of Ist class hard wood sheesham .
(c) Centre rail made out of Ist class hard wood sheesham .
(d) Leg rail made out of Ist class hard wood sheesham .
(e) PGI Sheet 22 Guage to the trustle store wooden.
(f) Preservative of trustle store room wooden with creaosote oil and used Engine oil of mixed Ration 50 : 50 .
REPAIR TO TABLE OFFICE CLERK WOODEN (FD/DB):- ( For Serial item No 159 to 165) Material and labour for replacement of top of table office clk wooden with 18/19 mm thick MDF board (exterior grade) ISI marked both side commercial over with 1mm thick laminated sheet ( Shade and texture natural teak) shall be fixed with synthetic rubber adhessive of make Fevicol or Pidilite 4 mm thick half round teak wood edging all round shall be fixed to the frame all as per drawing including Taking out old top and completes all as specified and as directed.
M & L for Taking out broken legs of Table and supply and fixing new leg of required size made out of well seasoned 1st class teak wood, all as per drawing & view completes all as specified and as directed.
M & L for taking out broken front rail of Table and supply and fixing new front rail of required size made out of well seasoned 1st class teak wood, all as per drawing & completes all as specified and as directed.
M & L for taking out broken side rail of Table and supply and fixing new side rail of required size made out of well seasoned 1st class teak wood, all as per drawing & completes all as specified and as directed.
M & L for taking out broken drawer of Table and supply and fixing new drawer with fency crome plated knob of required size made out of well seasoned 1st class teak wood, all as per drawing & completes all as specified and as directed.
M & L for taking out broken stiffener of Table and supply and fixing new stiffener of required size made out of well seasoned 1st class teak wood, all as per drawing & as specified and completes all as specified and as directed.
Material and labour for preparation of surfaces by removing of old existing fade out polish from following wooden furniture by scrapping or with caustic soda and rubbed down by emery paper including filled up the cracks and pores with a paste and putty and applying two coats of French polish of approved quality/PFU with high gloss finish on exposed surfaces to view completes all as specified and as directed.
REPAIR TO TABLE OFFICE OFFICER WOODEN (FD/DB):- ( For Serial item No 166to 173) Material and labour for replacement of top of table office OFFICER wooden with 18/19 mm thick MDF board (exterior grade) ISI marked both side commercial over with 1mm thick laminated sheet ( Shade and texture natural teak) shall be fixed with synthetic rubber adhessive of make Fevicol or Pidilite 4 mm thick half round teak wood edging all round shall be fixed to the frame all as per drawing & including Taking out old top view completes all as specified and as directed.
M & L for Taking out broken legs of Table and supply and fixing new leg of required size made out of well seasoned 1st class teak wood, all as per drawing & view completes all as specified and as directed.
M & L for taking out broken front rail of Table and supply and fixing new front rail of required size made out of well seasoned 1st class teak wood, all as per drawing & view completes all as specified and as directed.
M & L for taking out broken side rail of Table and supply and fixing new side rail of required size made out of well seasoned 1st class teak wood, all as per drawing & view completes all as specified and as directed.
M & L for taking out broken drawer of Table and supply and fixing new drawer with fency crome plated knob of required size made out of well seasoned 1st class teak wood, all as per drawing & view completes all as specified and as directed.
M & L for taking out broken door of box of Table and supply and fixing new door with fency crome plated knob of required size made out of well seasoned 1st class teak wood, all as per drawing & view completes all as specified and as directed.
M & L for taking out broken stiffener of Table and supply and fixing new stiffener of required size made out of well seasoned 1st class teak wood, all as per drawing & view completes all as specified and as directed.
Material and labour for preparation of surfaces by removing of old existing fade out polish from following wooden furniture by scrapping or with caustic soda and rubbed down by emery paper including filled up the cracks and pores with a paste and putty and applying two coats of French polish of approved quality/PFU with high gloss finish on exposed surfaces to view view completes all as specified and as directed.
REPAIR TO TABLE 3’ X 2’ (WITH / WITHOUT DRAWER) (FD-283 & other):- ( For Serial item No 174 to 180) Material and labour for replacement of top of table 3’ X 2’ with / without drawer with 18/19 mm thick MDF board (exterior grade) ISI marked both side commercial over with 1mm thick laminated sheet ( Shade and texture natural teak) shall be fixed with synthetic rubber adhessive of make Fevicol or Pidilite 4 mm thick half round teak wood edging all round shall be fixed to the frame all as per drawing & including Taking out old top view completes all as specified and as directed.
Taking out broken legs of Table and supply and fixing new leg of required size made out of well seasoned 1st class teak wood, all as per drawing and view completes all as specified and as directed.
Taking out broken front rail of Table and supply and fixing new front rail of required size made out of well seasoned 1st class teak wood, all as per drawing and view completes all as specified and as directed.
Taking out broken side rail of Table and supply and fixing new side rail of required size made out of well seasoned 1st class teak wood, all as per drawing and view completes all as specified and as directed.
Material and labour for replacement of drawer with fancy knob B46 completes all as specified and as directed.
Taking out broken stiffener of Table and supply and fixing new stiffener of required size made out of well seasoned 1st class teak wood, all as per drawing and completes all as specified and as directed.
Material and labour for preparation of surfaces by removing of old existing fade out polish from following wooden furniture by scrapping or with caustic soda and rubbed down by emery paper including filled up the cracks and pores with a paste and putty and applying two coats of French polish of approved quality/PFU with high gloss finish on exposed surfaces to view completes all as specified and as directed.
vivek and co
SEALINE BUILDERS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .