Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹8.5 LAccepted-AOC | L1 | Accepted-AOC REASONABLE | |
| 2 | L2₹10.4 L+₹1.6 L (18.6%)Rejected-Finance | L2 | Rejected-Finance HIGH RATE | |
| 3 | L3₹10.6 L+₹1.8 L (20.8%)Rejected-Finance | L3 | Rejected-Finance HIGH RATE | |
| 4 | L4₹10.7 L+₹1.9 L (21.4%)Rejected-Finance | L4 | Rejected-Finance HIGH RATE | |
| 5 | L5₹11.3 L+₹2.5 L (28.8%)Rejected-Finance | L5 | Rejected-Finance HIGH RATE |
Tender Value
₹8.5 L
EMD Value
₹17,000
Closing Date
26 Dec 2022, 2:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
AJIT KUMAR DWIVEDI,AE (E/M)
AGE (I) AF SINGARSI
Repair to roof covering false ceilings Parking sheds and related civil and E M works to certain building at AF Stn Singarsi
2022_MES_565839_1
C/8584/E8
Open Tender
Civil Works
Item Rate
180 days
AGE (I) AF SINGARSI
Please refer Tender documents.
3 documents required · 3 mandatory
₹500
Yes
AGE (I) AF SINGARSI
₹17,000
Yes
2 Jan 2023
29 Nov 2022
27 Dec 2022
29 Nov 2022
26 Dec 2022
7 Dec 2022
Amount
S&F 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc. and Fixed with L-type or J-type or cranked hook bolts including dismantling of existing sheet,complete all as specified and as directed.
M&L for Pre- painted Galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified including dismantling of existing sheet,complete all as specified and as directed.
M&L for pre-painted Galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified including dismantling of existing sheet,complete all as specified and as directed.
Dismantling MS Work of any description not otherwise provided for all complete all as specified and as directed.
S&F Rolled mild steel sections as in main & cross beams, hip & jack rafters; purlins where connected to common rafters & running rails & guides for sliding doors; fixed with angle cleats or other connecting plates Fe-410-W(Gde-E-250)quality-B,complete all as specified and as directed.
M&L for Mild Steel work as in flat iron for fix the steel framework for eaves board and wind tie complete all as specified and as directed .
Ditto as Item No-6 above but for fixing Only .
S&F Mild steel screw bolts (machine made) with hexagonal / square heads at one end & screwed the other/ screwed both ends, each screwed end to be fitted with washers & one hexagonal or square nut, length of bolt exc 5cm but n exc 10cm long dia of shank 16 to 20 mm,complete all as specified and as directed.
Dismantling of wall and ceiling boards( fibre pulp insulation etc) any thickness including cover fillets,complete all as specified and as directed.
S&F 4 mm thick asbestos cement plain building boards in ceiling and eves boards fixed to timber framework with screws, complete all as specified and as directed.
Material and labour for 7 to 9 mm thick Pre painted gypsum building boards of size 595 x 595mm PVC laminated at back side of board insulation & acoustic purpose flat in ceiling fixed .NOTE: (The rate inclusive of scaffolding and necessary arrangements ( ht of building shall be up to 10m ),complete all as specified and as directed.
Providing and fixing Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions, complete all as specified and asd directed. NOTE: (The rate inclusive of scaffolding and necessary arrangements).
S&F in repair Anodised aluminium snap grid frame work for false ceiling all as specified . NOTE: (The rate inclusive of scaffolding and necessary arrangements).complete all as specified and as directed.
S&F Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and as directed. . NOTE: (The rate inclusive of scaffolding and necessary arrangements).
M&L 2nd class hardwood Plain fillets, square, rectangular or triangular in section, clean sawn, secured with nails for framework sectional area exc 13 sq cm and n'exc 25sq cm, complete all as specified and as directed by Engineer-in-Charge.
M&L for preparation of new celling surfaces and applying two coats of Oil bound distemper over a coat of putty, complete all as specified and directed by Engineer-in-Charge.
M&L for Preparing new AC sheet ceiling surfaces and applying three coats of white wash complete all as specified and as directed by Engineer-in-Charge.
S&F asbestos cement building board cover strips, 50 mm x 5 mm with bevelled edges over joints including all mitres as in eave board etc. and fixed with screws complete all as specified and as directed.
M&L for applying two coats of synthetic enamel paint over a coat of primer as in eaves board over 10 cm width or girth including preparation, complete all as specified and as directed .
Demolition of brick work/stone boulder built in cement mortar including all quoins, pillars, arches etc,complete all as specified and as directed.
M&L for Plain cement concrete type 1:4:8 D-2 (using 40mm graded stone aggregate) as in foundation, sub base of path etc complete all as specified and directed by Engr-in-Charge.
M&L for brick work with sub class B bricks straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and as directed.
M&L for Random rubble walling Jodhpur type regular coursed well bonded ,bedded and solidly hearted built in cement mortar 1:6, complete all as specified and as directed.
All as per item No 23above but except stone
Extra over random rubble stone walling uncoursed for hammer dressing to face of stone with max depression on face from a straight edge not exc 20mm and dressing,complete all as specified and as directed.
M&L for copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded for chamfered angles and throating, as directed type B1 (1:2:4) using 20 mm graded aggregate.
M&L for rendering in CM 1:4, 15mm thick on brick work or concrete surfaces finished the surfaces even and fair complete all as specified and as directed.
Taking down cement plaster of any description on brick or stone walls or from concrete surface incl raking out joints, hacking for key, scrubbing down with water etc all as specified,and removing unserviceable material outside cantt area etc complete all as specified and directed by Engr-in-Charge.
M&L for Rendering 15 mm thick in CM 1:4 on fair face of stone work surfaces finished even and smooth without using extra cement etc complete all as specified and directed by Engr-in-Charge.
M&L for applying two coats of cement base paint, white or tinted on new wall surface including preparation of surface,complete all as specified and as directed.
Demolition of cement concrete (unreinforced) in ground floors and pavings n. exc 15 cm thickness (below or above ground level ) and removing unserviceable material and disposed to low lying area etc complete all as specified and directed by Engr-in-Charge.
Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar and removing unserviceable material and disposed to low lying area etc complete all as specified and directed by Engr-in-Charge.
M&L 75mm plain cement concrete type B-1, 1:2:4(using 20 mm graded stone aggregate) as in hard standing etc, complete all as specified and directed by Engr-in-Charge.
M&L for glosy finish chequered cement concrete tiles 30cm x 30cm x 25 mm thick, set, jointed and pointed in neat cement slurry in floors using white cement and pigments including 15mm thick screed bed in CM 1:6etc (as in patches and as per site condition) as per design/pattern approved by AGE(I) etc, complete all as specified and directed by Engr-in-Charge.
M&L for glosy finish Machine pressed precast concrete interlocking paver block rubber moulded laid with Grey cement and pigment any size and shape conforming to IS 15658-2006 of 60mm thick M-35grade over and including 50 thick sand cushion etc complete all as specified and directed by Engr-in-Charge.
Dismantling structural steel work including doors, gates but excluding framed truss etc,complete all as specified and as directed.
Taking down old steel gate/shutter of each size exc 3 Sqm but not exc.9 sqm and in any condition and refixing the same gate 150mm above the road level in same openings after changing the necessary items i,e, pintel hinges, shifting of holdfast with welding, providing of revolving hinges including cutting welding necessary steel items including excavation, demolition of cement concrete and PCC 1:2:4 etc complete all as specified and directed by Engr-in-Charge. Note: Each gate shall be weight will be 200 kg and above, guard bars and angle iron will be measured separately.
ditto all as item no.37 above but exc 1sqm but not exc 4sqm Note: Each gate weight will be less than 100 kg, guard bars and angle iron will be measured separately.
S&F Structural steel framed work as in gates of angle or other section for portions framed and hung as gates, including pintle hinges, stops, hand-made sliding bolts etc. to be prepared for hanging or sliding complete steel conforming to Fe-410-0 or Fe-310-0 etc complete all as specified and directed by Engr-in-Charge.
Excavating in post holes (or similar holes) each n.exc 0.5 cum getting out returing filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25cm in soft/loose soil.
S&F MS plain black sheet 1mm thick as in steel gate wall cladding and similar including welding cutting holes etc fixed in repairs etc complete all as specified and directed by Engr-in-Charge.
S&F expanded metal welded steel wire fabric weight n'exc 4kg per Sqm fixed to steel members by welding etc complete all as specified and directed by Engr-in-Charge.
M&L for MS work as in post,roof trusses (framed), trussed, purlins, (pipe/post,beam, tee, angle, channel or flat sections) including distance pieces, cleats etc Fe 410 -W (Gde- E- 250) complete all as specified.
Taking down existing rolling shutter from the existing place and greasing repair to wearing , shutter , channel cover gear etc. and refixing to same opening in serviceable condition complete with the satisfaction of engineer -in- charge.
M& L ball bearing for rollig shutter as in repair complete all as specified and as directed.
M&L PCC 1:3:6 type B2 using 40mm graded aggregate as in foundation filling and mass concrete as in post etc complete all as specified and directed by Engr-in-Charge.
M&L for Cutting chases, pinning in, Brick/stone walls making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps cills, sunshades, shelves,lintels etc; and cutting chases for inserted AC/Steel sheet in walls and making good, cutting including painting to match the existing etc. exc.10CM but n'exc20CM girth complete all as specified and directed by Engineer-in-Charge.
Applying two coats of synthetic enamel paint on steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of new surface & applying one coat of red oxide, zinc chrome.
Applying one coat of synthetic enamel paint on old steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of old painted surface.
Preparation of new wooden Surfaces of any description with one coat of pink primer and two coats of synthetic enamel paint, not otherwise described , n exc 10 cm width or girth complete all as specified and as directed by Engineer-in-Charge.
M&L for applying one coat of cement base paint including preparation of old plastered surfaces of walls,chajjas,facia etc up to 10mtr hight bldg complete all as specified.
Taking down carefully unserviceable copper / aluminium point wiring (light, fan, bell socket or power) including all fittings such as switches, socket, ceiling roses , regulators and fittings complete and making good the disturbed surfaces all as directed by Engineer-in-Charge.
M&L for point wiring with PVC insulated unsheated stranded copper conductor cable of size 1.5 sq mm (FRLS) in and including PVC cassing caping of required width with all necessary fittings with sunk cast iron /pressed steel terminal box of 1.6mm wall thickness and 3 mm thick laminated sheet top cover for mounting switches including 1.5 sq mm (FRLS) PVC insulated unsheathed stranded copper conductor as earth lead and connected to common earth doly for one light / ceiling fan/exhaust fan/bell controlled by one switch complete all as specified and directed by engineer in charge.
M&L for switch piano flush type, single pole one way, 5 Amp complete all as specified and directed by engineer in charge. Make: Anchor/Plaza/Havells/Kinjal
S & F ceiling rose, surface bakelite, 65 x 50 mm,three terminals complete all as specified and directed by engineer in charge.
S&F 36 W (2'X2') , LED Recessed full lit luminarie with glare free uniform illumination with longer life and less maintenance , Environmental friendly, new generation, aesthetically designed, ultra modern with high brightness SMD LED lamp as light source , suitable for Armstrong /Grid ceiling etc pre-wired complete with fixture all as specified and directed after taking down & directed by Engr-in-charge.Make : Havell ,Crompton Phillips,Bajaj.
M/S ASHA ENTERPRISE
LALAN SHARMA
M/S SINGH ENTERPRISE
DANATION CONSTRUCTIONS
M/S New Builders Corporation
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .