Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹8.9 LAccepted-AOC LOKMAT BHAWAN A WING 808 WARDHA ROAD RAMDASPETH NAGPUR 440010 | NAGPUR | MAHARASHTRA | 440010 | L1 | Accepted-AOC Being L1 and reasonable bidder | |
| 2 | L2₹9.1 L+₹11,324 (1.26%)Rejected-Finance | L2 | Rejected-Finance Other than lowest bidder | |
| 3 | L3₹9.6 L+₹59,986.50 (6.67%)Rejected-Finance 58 CHANDRALOK BLDG MAYO HOSPITAL ROAD NAGPUR 440018 | NAGPUR | NAGPUR | MAHARASHTRA | 440018 | L3 | Rejected-Finance Other than lowest bidder |
| Sl No | Description | Qty | Unit | Paragon Electrotechnics L3 | SRI JD CORPORATION L1 | SONA LAKSHMI ASSOCIATE L2 |
|---|---|---|---|---|---|---|
| 1.00 | M & L in replacement cable jointing kit for 11 KV (earthed) grade cable for outdoor termination heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured conductor cable of size 50 to 95 Sqmm complete all as specified and as directed. | 1 | Each | 6,500 ₹6,500 | 5,500 ₹5,500 | 5,000 ₹5,000 Lowest |
| 2.00 | M & L in replacement cable jointing kit for 11 KV (earthed) grade cable for outdoor termination heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured conductor cable of size 50 to 95 Sqmm complete all as specified and as directed. | 1 | Each | 6,500 ₹6,500 | 4,860 ₹4,860 Lowest | 5,000 ₹5,000 |
| 3.00 | M & L for painting to existing surfaces of HT/LT 11 mtr long steel tubular poles with 2 coats of aluminium paint over the existing surface including brackets clamps junction boxes etc including writing of pole number and painting to HT insulator RYB etc complete all as specified and as directed. | 2 | Each | 750 ₹1,500 | 585 ₹1,170 Lowest | 1,000 ₹2,000 |
| 4.00 | M & L for Air break switch (GOD) Gang Operated Device horizontal / vertical type, tripple pole, mechanically operated, mounted on nine FRP insulators and steel frame, with operating mechanism worked from ground level, with operating rod 25mm dia light grade GI pipe, suitable for current rating upto 200 Amps, HT 11 KV including taking out old unserviceable one and connecting up complete with locking arrangement complete all as specified and as directed. | 1 | Each | 26,500 ₹26,500 | 8,550 ₹8,550 Lowest | 15,000 ₹15,000 |
| 5.00 | M & L for lightning arrestors expulsion type complete with all fittings, transmission class discharge capacity 65 kilo amps suitable for 11000 volts complete all as specified and as directed by Engr-in-Charge. | 1 | Per Set | 4,500 ₹4,500 Lowest | 9,450 ₹9,450 | 6,500 ₹6,500 |
| 6.00 | Dehydration including filtration of transformer oil on different locations by dehydration plant including testing of samples before and after dehydration and filtration complete all as specified and directed the dielectric strength to be achieved 60 KV at 4 mm gap after complete dehydration. | 1,200 | Ltrs | 12 ₹14,400 Lowest | 30 ₹36,000 | 12 ₹14,400 Lowest |
| 7.00 | M & L for cleaning of complete body of transformer of capacity 315 KVA and painting with two coat dark BS Grey painting & R, Y, B, Black, Green colour coding to insulators complete all as specified and directed | 1 | Each Job | 5,000 ₹5,000 | 3,000 ₹3,000 Lowest | 15,000 ₹15,000 |
| 8.00 | M & L for filling in with new transformer oil for top up having low viscosity of approved make as per IS 355 of 1992 and di-electric strength 60 KV(after filtration) complete all as specified and directed by Engineer-in-Charge. | 210 | Ltrs | 150 ₹31,500 Lowest | 200 ₹42,000 | 160 ₹33,600 |
| 9.00 | M & L Replacement of HT bushing porcelain, vitreous with brass spindle, threaded with washers nuts, lock nut and rubber seal suitable for transformer of any make /type/capacity in repairs complete all as specified and directed by Engineer-in-Charge. | 1 | Each | 1,500 ₹1,500 | 360 ₹360 Lowest | 5,000 ₹5,000 |
| 10.00 | M & L Replacement of LT bushing porcelain, vitreous with brass spindle, threaded with washers nuts, lock nut and rubber seal suitable for transformer of any make /type/capacity in repairs complete all as specified and directed by Engineer-in-Charge. | 2 | Each | 2,500 ₹5,000 | 270 ₹540 Lowest | 5,000 ₹10,000 |
Tender Value
₹10 L
EMD Value
₹20,000
Closing Date
18 Oct 2025, 6:00 pmClosed
AGE (I) AF Sonegaon, Nagpur
Bldg P-51, 44 Wing AF Station Sonegaon, Nagpur - 440005
REPAIR OF E/M INSTALLATION VCBS, VOLTAGE STABILIZER AND LT ACB ETC AT AF STN SONEGAON.
2025_MES_733063_1
8567/E8
Open Tender
Electrical and Maintenance Works
Item Rate
180 days
Sonegaon
As per NIT
8 documents required · 8 mandatory
₹500
Yes
AGE (I) AF Sonegaon
₹20,000
Yes
27 Nov 2025
27 Sept 2025
25 Oct 2025
27 Sept 2025
18 Oct 2025
11 Oct 2025
27 Sept 2025 - 7 Oct 2025
Amount
M & L in replacement cable jointing kit for 11 KV (earthed) grade cable for outdoor termination heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured conductor cable of size 50 to 95 Sqmm complete all as specified and as directed.
M & L in replacement cable jointing kit for 11 KV (earthed) grade cable for outdoor termination heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured conductor cable of size 50 to 95 Sqmm complete all as specified and as directed.
M & L for painting to existing surfaces of HT/LT 11 mtr long steel tubular poles with 2 coats of aluminium paint over the existing surface including brackets clamps junction boxes etc including writing of pole number and painting to HT insulator RYB etc complete all as specified and as directed.
M & L for Air break switch (GOD) Gang Operated Device horizontal / vertical type, tripple pole, mechanically operated, mounted on nine FRP insulators and steel frame, with operating mechanism worked from ground level, with operating rod 25mm dia light grade GI pipe, suitable for current rating upto 200 Amps, HT 11 KV including taking out old unserviceable one and connecting up complete with locking arrangement complete all as specified and as directed.
M & L for lightning arrestors expulsion type complete with all fittings, transmission class discharge capacity 65 kilo amps suitable for 11000 volts complete all as specified and as directed by Engr-in-Charge.
Dehydration including filtration of transformer oil on different locations by dehydration plant including testing of samples before and after dehydration and filtration complete all as specified and directed the dielectric strength to be achieved 60 KV at 4 mm gap after complete dehydration.
M & L for cleaning of complete body of transformer of capacity 315 KVA and painting with two coat dark BS Grey painting & R, Y, B, Black, Green colour coding to insulators complete all as specified and directed
M & L for filling in with new transformer oil for top up having low viscosity of approved make as per IS 355 of 1992 and di-electric strength 60 KV(after filtration) complete all as specified and directed by Engineer-in-Charge.
M & L Replacement of HT bushing porcelain, vitreous with brass spindle, threaded with washers nuts, lock nut and rubber seal suitable for transformer of any make /type/capacity in repairs complete all as specified and directed by Engineer-in-Charge.
M & L Replacement of LT bushing porcelain, vitreous with brass spindle, threaded with washers nuts, lock nut and rubber seal suitable for transformer of any make /type/capacity in repairs complete all as specified and directed by Engineer-in-Charge.
M & L for Top gasket sheet made out of 2 mm thick cork sheet with suitable GI bolts, nuts, washers for top of transformer any capacity in repairs complete all as specified and directed.
M & L for Dehydrating breather assembly Aluminium/CI body of standard size filled with silica-gel for transformer of any capacity in repairs complete all as specified and directed.
M & L Temperature gauge circular dia type of standard size for transformer of any capacity in repairs complete all as specified and directed.
Annual maintenance including service and all checks as recommended by the manufacturer including opening and taking out unserviceable VCB panel units any capacity at AF Stn Sonegaon carried out repair work including cleaning, insulation value checking, applying lubricants to mechanism and operational check-up complete all as specified and directed. Note: - (i) The service of VCBs are to be carried out through authorised service engineer/dealers. (ii) The duration of the service is once in three months throughout currency of contract. (iii) Periodical test report to be submitted through authorised service engineer/dealers for every quarterly. (iv) Report of quarterly inspection maintenance carried out by the contractor to be submitted on every inspection / maintenance and after rectification of any breakdown. (v) Contractor is liable for conducting inspection/maintenance/repair on call basis if required other than normal quarterly inspection. On call contractor is required to attend the complaint within 24 hrs. If not attended the complaint within 24 hrs contractor is liable to pay a penalty Rs. 1500/- per day. (vi) Replacement of major spare parts as given in item here-in-after will be measured and paid separately.
S & F in replacement of numerical over current protection relay (2OC + 1 EF + 1 REF IDMTL and INST protection) digital type along with high set facility suitable for 11 KV HT VCB/RMU including provisioning blanking sheet to match the existing surface of the VCB complete all as specified and as directed.
S & F in replacement resin cost current transformer 11 KV indor type of protection and metering of accuracy class 1, 5P-10 duel core of ratio 50/5 amps, 15 KVA burden complete all as specified and as directed.
S & F in replacement potential transformer 11 KV 50 HZ, class 0.2, burden - 50VA fixed type 3 phase resin cast indoor type complete all as specified and as directed.
S & F in replacement Tulip support 1250 amps Model HCA/HPA/ESH/VD4/VBF suitable for VCB/Load break switch complete all as specified and as directed by Engr-in-Charge.
S & F in replacement Tulip complete/Tulip contacts (15 Figure) 1250 amps Model HCA/HPA/ESH/VD4/VBF suitable for VCB/Load break switch complete all as specified and as directed by Engr-in-Charge.
S & F in replacement Auxiliary contacts suitable for VCB complete all as specified and as directed.
S & F in replacement support insulator Model HCA/HPA/ESH/VD4/VBF suitable for VCB/Load break switch complete all as specified and as directed by Engr-in-Charge.
S & F in replacement close/trip coil 24 volt/30 volt/110 volt/220 volt DC Model HCA/HPA/ESH/VD4/VBF suitable for VCB/Load break switch complete all as specified and as directed by Engr-in-Charge.
S & F in replacement coil 24 volt/30 volt/110 volt/220 volt DC Model HCA/HPA/ESH/VD4/VBF suitable for VCB/Load break switch complete all as specified and as directed by Engr-in-Charge.
S & F in replacement Motor assembly 110 volt / 220 volt AC/DC Model HCA/HPA/ESH/VD4/VBF suitable for VCB/Load break switch complete all as specified and as directed by Engr In Charge.
S & F in replacement Micro switch with ball or without ball Model HCA/HPA/ESH/VD4/VBF suitable for VCB/Load break switch complete all as specified and as directed by Engr In Charge.
S & F in replacement anti pumping relay 110 volts AC/DC Model HCA/HPA/ESH/VD4/VBF suitable for VCB/Load break switch complete all as specified and as directed by Engr In Charge.
S & F replacement TNC switches suitable for VCBs complete all as specified and as directed.
S & F replacement Indication lamp suitable for VCBs complete all as specified and as directed.
S & F replacement Multifunction meter suitable for VCBs complete all as specified and as directed.
S & F replacement Volt meter suitable for VCBs complete all as specified and as directed.
S & F replacement Ammeter suitable for VCBs complete all as specified and as directed.
S & F replacement Electronic hooters suitable for VCBs complete all as specified and as directed.
S & F in replacement space heater suitable for VCB panel 100 watt 240 AC 50 HZ AC Supply complete all as specified and as directed.
S & F in replacement Thermostat 30 to 70 degree centigrade suitable for controlling space heater inside VCB panel 240 AC 50 HZ AC Supply complete all as specified and as directed.
S & F in replacement manual fixed Air Circuit Breaker intelligent release Micropro2-3.1 four pole 800 amps breaking capacity 50 KA Icu=Ics=Icw 1 Sec microprocessor release, auxiliary switch 6NO+6NC, main CTs, horizontal terminals with LSING protection, Digital display with multifunction meter complete all as specified and as directed.
Dismantling and taking out top cover of servo voltage stabilizer of capacity 250 KVA and carried out repair work including replacement of following spare parts and re-fixing the top cover after repair work including necessary T&P required at site i,e. chain pulley block with tripod arrangement if required and painting with two coat dark BS grey painting & R, Y, B, Black, Green colour coding to insulators complete all as specified and as directed. Note: - Spare parts required for repair of stabilizer are measured and paid separately.
S & F Servo Circuit board (PCB) complete all as specified and as directed.
S & F PCB holder complete all as specified and as directed.
S & F Trigger transformer (9/18 volt) complete all as specified and as directed.
S & F Servo Motor 10 Kg torque with RC complete all as specified and as directed.
S & F Carbon brush complete all as specified and as directed.
S & F Dimmer 125 amps (Per Phase) complete all as specified and as directed.
S & F Transformer 100 KVA for Servo stabilizer (Per Phase) complete all as specified and as directed.
SONA LAKSHMI ASSOCIATE (BID ID -3462612)
Paragon Electrotechnics (BID ID -3458396)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.42 MB
BOQ_820787.xls
BOQ • 0.35 MB
TD8567VCB.pdf
Tender Documents • 1.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .