Comprehensive Repair to Kitchen at New Mil Stn Kapurthala under GE Kapurthala

Amount

Dismantling boarding, cupborad any description, fixed in any position, complete all as specified and directed by Engr-in-Charge.

M&L for providing and fixing cupboard shutter with 19mm thick one side decorative and other side balancing lamination factory pressed WPC CELLECUKA BOARD 710 of approved brand including 2mm thick PVC edge banding tape with hot glue by edge bending machine etc. with auto closing spring loaded hinges (hydraulic type) etc, complete all as specified and directed by Engr-in-Charge.

M&L for providing and fixing 19mm thick both side balancing lamination factory pressed BWP grade marine ply as per IS 710 of approved brand boxes,shelves,racks,almirah,cupboard and drawer etc. including necessary nails,screws etc, complete all as specified and directed by Engr-in-Charge.

M&L for providing and fixing 200 mm long stainless steel fancy handle of approved make fixed with SS screws etc, complete all as specified and directed by Engr-in-Charge.

M&L for providing and fixing stainless steel soft closing spring hinges at 0 degree hinges (hydraulic type) of approved make/brand to cupboard shutters with full threaded steel screws including making necessary recess in board and finished etc, complete all as specified and directed by Engr-in-Charge.

M&L for providing and fixing stainless steel soft closing heavy type telescopic drawer channels of approved make long with screws etc, complete all as specified and directed by Engr-in-Charge.

M&L for providing Heavy Duty Modular Kitchen Cabinet Door Lift Support Hydraulic Mechanism/Accessories complete all as specified and directed by Engr-in-Charge.

M&L for providing and fixing ready made 304 grade stainless steel Modular kitchen basket and accessories such as right angle basket (Plain Cup & Saucer, plant, Partition, Bottle rack, Thali, Cutlery) kitchen utensil basket, Dinner set basket, kitchen grain basket, Multipurpose basket as per site requirement including finishing (wherever required) and fittings. The same shall be fixed with necessary stainless steel nuts & bolts, Stainless Steel screws & telescopic channel etc. complete all as specified and directed by Engr-in-Charge. (For payment purpose only weight of Stainless steel basket shall be considered excluding weight of all fixing accessories such as nuts, bolts, fasteners telescopic basket channels etc. Payment of providing and fixing telescopic channel shall be paid separately).

M&L for providing and fixing 2mm thick 16 to 19mm wide PVC edge binding tape of approved quality for cupboard/wardrobe shutters including necessary synthetic resin hot pressed to edges on binding machine etc. complete all as specified and directed by Engr-in-Charge.

M&L for 20 mm thick granite slab, tabled rubbed, machine cut, duly grinding, polishing, moulding etc of all outer edges / sharp corners, duly fixed in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4), incl pointing in grey cement (1:2) using marble dust with admixture of pigment to match with the shade of slab, complete all as specified and directed by Engr-in-Charge.

Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed by Engr-in-Charge.

M&L for rendering 15 mm thick in CM 1:4 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.

M&L for rendering 15mm thick in CM(1:6) on fair faces of brick work/concrete surfaces, finished even & smooth (without using extra cement), complete all as specified and directed by Engr-in-Charge.

M&L for 5mm thick rendering in CM 1:3 on brick work or concrete surfaces finished even and smooth w/o using extra cement in Ceiling etc complete all as specified and directed by Engr-in-Charge.

M&L for preparation of newly plastered surfaces of wall and applying two coats of oil bound distember over a coat of 3mm putty to make the surface to be plain and smooth complete all as specified and directed by Engr-in-Charge.

M&L for preparation of newly plastered surfaces of wall and applying two coat of weather proof exterior grade emulsion paint, complete all as specified and directed by Engr-in-Charge.

M&L for preparation of new plastered surfaces of ceiling and applying three coats white wash on ceiling complete all as specified and directed by Engr-in-Charge.

Demolition of brick/block masonry built in CM including all quoins, arches, pillars etc and clearing off the premises complete all as specified and directed by Engr-in-Charge.

M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in CM 1:4, complete all as specified and directed by Engr-in-Charge.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises, complete all as specified and directed by Engr-in-Charge.

M&L for glazed ceramic coloured tiles in vertical surface 450 x350 x 7mm thick set and jointed in neat cement slurry pointed in white or colour cement to match the colour,with 10 mm thick cement screed bed (1:4) complete all as specified and directed by Engr-in-Charge.

M&L for vitrified ceramic coloured tiles 10 mm thick light shade (square /rectangular) area of each tile exceeding 0.18sqm but n.exc 0.38 Sqm in floor set and jointed in neat cement slurry and pointed in white or colour cement to match the tiles, with 15 mm thick cement screed bed in CM (1:6) complete all as specified and directed by Engr-in-Charge.

Taking down GI tubing & connection 15mm dia laid in floor/trenches or fixed to walls complete all as specified and directed by Engr-in-Charge.

S&F GI tubing 15mm dia medium grade galvanized with all fittings & fixed complete to walls & ceiling or laid in floors, complete all as specified and directed by Engr-in-Charge.

Taking down GI tubing & connection 20mm dia laid in floor/trenches or fixed to walls complete all as specified and directed by Engr-in-Charge.

S&F GI tubing 20mm dia medium grade galvanized with all fittings & fixed complete to walls & ceiling or laid in floors, fixed to wall complete all as specified and directed by Engr-in-Charge.

S&F in repairs 15 mm bore CP bib taps fancy type (long body) cast copper alloy with crutch or butter fly handle screwed down for iron pipe or for brass ferrule and fixed complete all as specified and directed by Engr-in-Charge.

S&F in repairs 40 mm borePVC waste cupling with PVC waste pipe for Sink complete all as specified and directed by Engr-in-Charge.

S&F in repair PVC waste pipe 40mm bore, for sink complete all as specified and directed by Engr-in-Charge.

Cutting chases pinning in brick/stone/blocks masonary in making good to facings where required and pointing in CM (1:3) to ends or eges of steps, cills, sun shades, shelves, lintel etc and cutting chases for concealed water tubing or etc and making good complete all as specified and directed by Engr-in-Charge.

Taking down eaves gutters and rainwater pipes including all fittings, complete all as specified and directed by Engr-in-Charge.

S&F 110 mm PVC (SWR) pipes in repair single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed by Engr-in-Charge.

S&F 75 mm PVC (SWR) pipes in repair single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed by Engr-in-Charge.

S&F 75 mm PVC (SWR) bend complete all as specified and directed by Engr-in-Charge.

S&F 110 mm PVC (SWR) bend complete all as specified and directed by Engr-in-Charge.

S&F in repairs PVC(SWR) floor trap with grating and diameter of outlet 75mm including jointing to waste pipe fixed with solvent cement complete all as specified and directed by Engr-in-Charge.

S&F in repairs brass CP mixture valve Centre hole, cast copper alloy fancy type chromium plated for mixing hot and cold water screwed down high pressure with capstan head screwed both ends for iron pipe 15mm bore dia,complete all as specified and directed by Engr-in-Charge.

S&F kitchen sink with drain board made of stainless steel 1mm thick sheet with plugs, washers and waste pipe including bedding in cement mortar including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm and bowl size 410mm x 330mm x 160mm complete all as specified and directed by Engr-in-Charge.

S&F utensil rack stainless steel of size 750x600x250 mm fixed on walls with screws complete all as specified and directed by Engr-in-Charge.

JOGRAJ CONSTRUCTION COMPANY (BID ID -3087954)

G M BUILDERS 36 (BID ID -3094275)