RequiredExperience with Government
RequiredAnnual Turnover
RequiredCertificate (Requested in ATC)
RequiredOEM Authorization Certificate
RequiredOEM Annual Turnover Bid to RA enabled No Tree Guard ( 100 pieces ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Bid Requirement (Allowed Values) CONSTRUCTION/SIZE MATERIAL Construction Type Circular Tree Guard consisting of one circular (Cylindrical) frame made of crack resistant PP/PVC HDPE mesh without any vertical member as per sketch (Fig. 5) Square Tree Guard of Angle Iron consisting of four frames made of M.S. angle iron vertical members welded with M.S. wire mesh as per sketch (Fig. 1) uploaded in GeM Portal
Required1/6 uploaded in GeM Portal Circular Tree Guard of Angle Iron consisting of two semi circular frames made of M.S. angle iron vertical member welded with M.S. wire mesh as per sketch (Fig. 2) uploaded in GeM Portal
RequiredCircular Tree Guard of Round Bars consisting of two semi circular frames made of M.S. Round Bars welded with M.S. wire mesh as per sketch (Fig. 3) uploaded in GeM Portal
RequiredCircular Tree Guard of Angle Iron consisting of one circular frame made of M.S. angle iron vertical member welded with M.S. wire mesh as per sketch (Fig. 4) uploaded in GeM Portal
RequiredCircular Tree Guard consisting of one circular (Cylindrical) frame made of crack resistant PP/PVC/HDPE mesh without any vertical member as per sketch (Fig. 5) uploaded in GeM Portal Availability of Sketch (Figures) Yes * Sketch (Figures) have been seen
Requiredstudied and understood Yes * Number of frames required to form Tree Guard 1 1
Required2
Required4 Width/Diameter of Frame (D) 375 300
Required350
Required375
Required450
Required600
Required750
Required800 Height (H1) of the frame/Mesh (excluding legs) 1500 1000
Required1200
Required1500 Number of Legs in each frame NA 2
Required3
RequiredNA Height (H2) of the Legs (mm) NA 200
Required300
Required400
RequiredNA Number of vertical NA 2
Required3
RequiredNA 2/6 members in each frame Size of Vertical Member (mm x mm x mm) NA Angle Iron of 25 x 25 x 3 mm
RequiredAngle Iron of 25 x 25 x 5 mm
RequiredRound Bar of 10 mm dia.
RequiredNA Number of cross supports in each frame NA 2
Required3
RequiredNA Cross support Size NA Flat of 20 x 3 mm
RequiredRound Bar of 10 mm dia.
RequiredNA Material of the Mesh HDPE M.S. Wire
RequiredGalvanized M.S. Wire
RequiredPolyprpylene
RequiredPVC
RequiredHDPE Wire Mesh Diamter thickness 3 mm for Plastic Mesh 3.15 mm for M.S. Wire Mesh
Required2 mm for Plastic Mesh
Required3 mm for Plastic Mesh Mesh Aperture Size (mm x mm) 25 x 25 12 x 12
Required25 x 25
Required40 x 40
Required45 x 25
Required75 X 50 Frame joining to form Tree Guard NA For joining angle iron frames together
Requiredtwo hloes of size 8 mm dia on each side of the vertical member be drilled on the flange of the angle where wire mesh is not welded.
RequiredFor joining Round Bar frames together
Requiredtwo M.S. Strips of size 15 x 15 x 2 mm welded on each side of the vertical member. Each M.S. Strip be drilled with a hole of size 8 mm.
RequiredNA Hole position from the top of the frame (P1) NA 300
Required400
RequiredNA "Hole position from the bottom of the frame/mesh
Requiredexcluding leg portion (P2)" NA 300
Required400
RequiredNA Provided Appropriate Nuts & Bolts for Forming Tree Gurad NA * Pre-treatment/finish of Tree guard NA for PVC/PP/HDPE Mesh Powder Coated
RequiredRed- Oxide Primer + 3/6 Painted
RequiredGalvanized
RequiredRed-Oxide Primer
RequiredNA for PVC/PP/HDPE Mesh Overall Weight 0.75 * * Bold specifications are the golden parameters. * Bidders may note that In respect of non-golden Parameters
Requiredthe specifications 'Values' chosen by Buyer will generally be preferred over 'Bid requirement ( allowed Values) by the Buyer.
