REPAIR TO PCC PATH, HARD STANDING, KERB STONES, CHEQUER TILES, INTERLOCKING TILES AND CERTAIN MISCELLANEOUS B/R REPAIR WORKS AT RAKSHA VIHAR COLONY UNDER GE(I) R AND D KANPUR.

Amount

Demolition of PCC in ground floor and paving n exe 15 cm thickness (below or above ground level) .

Removing demolished building materials etc; to be distance of 100m or under, beyond the lead inculded in the rates, including loading, unloading and stacking at the destinaton complete all as specified and directed.

M&L 75 mm thick PCC 1:4:8 type D2 using 40 mm graded aggregate as in sub base complete all as specified and directed.

M&L for Sand filling under floors or in foundations including watering and consolidation complete

M&L for machine pressed precast concrete interlocking paver block of any shape and size conforming to IS-15658-2006 of 60mm thickness, M-35 grade with grey cement and no pigment complete all as specified and directed

All as per above Ser No 5 but except Interlocking Paver blocks. Note :- Old serviceable interlocking paver block obtained from demolition shall be reused.

Providing cement concrete 1:2:4 type B-1 in roof kerbs or mud stops,gola, rounded or chamfered on edges,complete all as specified and directed.

Dismantling of Stone slabs and tiles laid dry of any description or thickness in floors, aprons, complete all as specified and directed.

M&L for Chequered cement concrete tiles Squared/rectangle 20 to 22mm thick with grey cement and pigment set, jointed and pointed in neat cement slurry as in floors colour shall be approved by GE (I) R&D, over cement screed bedding 15mm thick in cement mortar (1:6) complete all as specified and directed

M&L 50 mm thick PCC 1:2:4, Type B2, using 20 mm graded aggregate as in paving/path finished fair and even complete all as specified and directed.

M & L for 75mm thick PCC (1:3:6) type C-2 as in plinth protection & finishing the surface even & smooth without using extra cement complete all as specified & directed.

M&L for laying at or near ground level factory made kerb stone 450mmx300mmx150mm of M-25 graded cement concrete in position to the required line, level and curvature jointed with cement mortar 1:4 including making joints with or without grooves (thickness of joint except at Sharpe curve shall not be more than 5mm) including making drainage opening wherever required complete all as specified and directed by Engr-in-Charge (pre cast shall be approved by GE (I) R&D length of finished kerb shall be measured for payment).

M&L applying two coats of synthetic enamel paint on new or old kerb tone surfaces over a coat of primer including preparation of kerb stone surfaces exc 10 cm width or girth, complete all as specified and directed.

Dismentling wrought iron or mild steel work of such as grill/roof purlin etc not otherwise provided for complete all as specified & directed.

Mild steel framed work as in gates, grills, grating pintel higes stope hand made sliding bolts etc with ends of bars shouldered and /or riveted or forged into spikes framed guard bars and for ornamentals and intricate design conforming to Fe 410-0 or 310-0 of angle iron of other sections complete drilled for fixing of steel sheeting or other coverings to be prepared for handing or sliding with and incl either hooks and hinges doors( Exclusive of steel sheeting or other covering running rails and guides) and hanging also fastening and fixing with one shop coat of Zinc Chrmate pait (incl preparation of surface0 at contractor wksp before febrication, complete all as specified.

M&L applying two coats of synthetic enamel paint over a coat of red oxide 0r zinc chromate primer including preparation of new steel or iron surfaces exc 10 cm width or girth, complete all as specified and directed.

Demolition of Brick work built in cement morter as in drains etc complete all specified and directed

M&L bricks work with sub class 'B' bricks straight or curved on plan exc 6 m mean radius built in cm 1:4 all as specified.

Except bricks work with sub class 'B' bricks straight or curved on plan exc 6 m mean radius built in cm 1:4 all as specified.

Taking down old cement plaster from brick or concrete surfaces including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces of wall in cement mortar (1:4) mixed with water proofing compound @ 2% by weight of cement by using scaffolding upto the 15m height complete all as specified and directed.

M&L for preparation of new plastered surface of wall and applying two coats of cement base paint over one coat of cement primer complete all as specified and directed.

Demolition of sunken floor taking out all unserviceable material and deposited 50 mtr away all as directed by Engineer in charge

M&L for 15mm thick cement screed in cement mortar 1:3 mixed with integral water proofing compound FOSROC's complast 421 IC @ 130 ml per bag of cement including a bonding coat of FOSROC's Nito bond AR cement slurry for sunkum slab complete all as specified

Providing and applying two coats of brush bond water profing coating intire surface of shunken portion including 15 mm thick plasting in cm 1:4 a bounding coat of fosrocs nito bound AR cement.

M&L Cement concrete 1:5:10 Type E2(using 40mm graded stone aggregate) in filling mass for Sunken floor all as specified directed.

M&L cement concrete (1:3:6) type C1 as in mass concrete (Using 20mm graged stone aggregate) concrete for Sunken floor all as specified

Dismantling floor and Wall tiling including cement mortar bedding (but backing) removing seviceable to store and rubbish off the premises complete all as specified

M&L 25mm thick PCC 1:2:4 type B-0 using 12.5mm graded aggregate as in bedding, finished fair and even.

M&L non skid ceramic coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.06 sqm but not exceeding 0.11 sqm, in floor etc, set and jointed in neat cement slurry and pointed in white and coloured cement to match coloured tiles including Screed bed of mortar 15mm thick for laying floor finishes CM (1:6) complete all as specified

M&L for glazed ceramic coloured tiles 300x450x7mm thick set and jointed in neat cement slurry and pointed in white cement with pigment or coloured cement to match shade of tiles in vertical surface over and including 10mm thick rendering in CM 1:4 complete all as specified complete all as specified

S&F squatting pan WC orrisa pattern size 580x440mm white intergal foot rest with 'P' or 's' drap incl provn of lime concrete bedding incl breabing tap existing dameaged WC seat and connection flush pipe etc and making good to floor complete all as specified.

S&F in repairs 10 liter capacity PVC valve less syphonic action type, flushing cistern, low level with inlet ball valve etc, complete including 32mm dia flush pipe all as specified & directed.

S&F PVC conneciton 30 cm long, 15mm size with PTMT nuts complete all as specified

S&F in repairs 15mm bore bib tap cast copper cromium plated with crutch or butter fly handle, screwed down, screwed for iron pipe or bore brass ferrule all as specified,

S&F in repairs, 15mm bore angle valve chromium plated, fancy type complete all as specified and directed.

Demolition and breaking up drain pipe of any type and size, set in cement mortar, in foul position.

S&F 110mm PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors, complete all as specified and directed.

S&F 110mm PVC(SWR) bends any radius complete all as specified and directed.

S&F 110mm PVC (SWR), Junction single, (Single T) equal or unequal), fixed with solvent cement, with oval access door, complete all as specified and directed.

S&F 75mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

M&L 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

Taking up or down 15mm dia steel tubing and connections, including cleaning for refixing or removal to store if required complete all as specified and directed

S & F for 3-layer PP-R Polypropylene random copolymer) pipes SDR 7.4 & SDR 11 UV stablised and antimicrobial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors ec complete all as specified and directed.

U.R ASSOCIATES

AJAY CONSTRUCTION COMPANY

ESKEY COMPANY

KALI CHARAN PANDEY