REPAIR REPLACEMENT OF INTERNAL ELECTRIC WORKS INCLUDING REWINDING OF CEILING FAN EXHAUST FAN WALL MOUNTED FAN LIGHT FITTING SUBMAIN WIRING GEYSER AND OTHER ALLIED WORKS INCLUDING OT LIGHTS AT PHASEI OF MH KHADKI UNDER GE MH AND RH KHADKI

Amount

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custodyor for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, complete all as specified.

M&L for point wiring using approved colour coding as per IS (Red , Black and Green for single phase circuits),with multistranded copper conductor 1.5 sq mm nominal cross-sectional area , single core, PVC insulated and unsheathed FRLS cable 1100 Volts grade, ISI-694 marked with valid CML No.in and inciuding medium grade, PVC surface conduit on wall/roof/floor etc, ISI marked with suitable accessories, mild steel/pressed steel sunken box of 1.2 mm thick and 60 mm deep (with earth dolly) duly painted with two coats of anti corrosive paint/aiuminium paint over a coat of red oxide primer internally and two coats of black bituminous paint over a coat of red oxide primer externally,covered with 3 mm thick plastic laminated sheet cover for fixing of switches, socket and fan regulators etc, inciuding PVC insulated multistranded copper conductor 1.5 sq mm nominal cross sectional area single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed by Engineer-in-charge for One light or fan point, controlled by one, one way switch 5 Amps.

One light point controlled by one switch

One Fan point controlled by one switch

One 5 pin 6 Amps socket outlet on independent board.

One 5 pin 6 Amps socket outlet on same board.

Bell /buzzer point controlled by one push button on the same board with other switches or indipendent with cables 1.5 sqmm size.

One light point controlled by two way switch.

All as per item No 01 here-in-before but wiring with 2.5 sqmm single core multi stranded copper condcutor 1100 v grade PVC insulated but unsheheted copper conductorFRLS cable 1100 volts grade and 2.5 sqmm PVC insulated but unsheathed FRLS cable as earthwire for 16 Amps power point on independent board complete all as specified and directed by Engr-in-charge.

S & F in repair switch piano type, one way, 6 Amp complete all as specified

S & F switch piano type inreplacement/ repair 16 Amps complete all as specified

S&F Bell push, flush type, inreplacement/ repair 6 Amp complete all as specified

S & F switch piano type two way 6 Amps inreplacement/ repair complete all as specified

S & F socket outlet 2 in1,3 pin 5 Amps inreplacement/ repair all as specified

S & F socket outlet 2 in 1, 3 pin, 6 and 16 Amps flush type complete all as specified

S & F switch socket combination 2 in 1, 3 pin, 5 and 15 Amps flush type complete all as specified

S & F switch socket combination 2 in 1, 3 pin, 5 Amps flush type inreplacement/ repair complete all as specified

S & F switch socket combination 2 in 1, 3 pin, 5 and 15 Amps Box type in all as specified

S & F switch socket combination 2 in 1, 3 pin, 5 Amps Box type complete all as specified and directed by Engr-in-Charge

S & F PVC ceiling rose surface type three terminals type inreplacement/ repair complete all as specified

S & F Buzzer / ding dong AC 230 volts, 6 Amp single Phase in white /Ivory colour finish inreplacement/ repair complete all as specified

S & F in repairs single pole and neutral enclosure with a metal two pin and earth plug and metal clad socket complete with one single pole MCB 20 Amps

S & F in repairs surface and wall mounted Regal Batten with including T8 tube rod energy efficient 20 W LED (four feet) complete in all respect including taking down old conventional type tube light fitting . Make : Havells/ Wipro/ Philips

S & F in repairs surface and wall mounted LED T5 integrated batten Batten with integrated electronic driver energy efficient 10W LED (Two feet) decorative complete in all respect including taking down old conventional type tube light fitting . Make : Havells/ Wipro/ Philips

S & F including Taking down square 600 mm X 600 mm, 36 w-42 w Reccese mounted bottom opening LED fitting including, LED Lamp with powder coated CRCA housing and polycarbonate diffuser, LED Fixture system wattage 36 -42 w,140V -260 V AC ,System lumen out put min 3600 lumen in 36 w and 4200 lumen in 42 w with 5700-6500 K CCT with PF>0.95 CRI>=80 and with <=10 % THD, with Min 2.5 KV surge protection in Built complete LED fixture with BIS Mark and R Registration no. Make : Havells equivalent in Crompton / WIPRO/ Philips

S & F including Taking down square 600 mm X 600 mm, 36 w-42 w Surface mounted bottom opening LED fitting including, LED Lamp with powder coated CRCA housing and polycarbonate diffuser, LED Fixture system wattage 36 -42 w,140V -260 V AC ,System lumen out put min 3600 lumen in 36 w and 4200 lumen in 42 w with 5700-6500 K CCT with PF>0.95 CRI>=80 and with <=10 % THD, with Min 2.5 KV surge protection in Built complete LED fixture with BIS Mark and R Registration no. Make : Havells equivalent in Crompton / WIPRO/ Philips

Taking down old unserviceable fitting, and S & F 20 W ultra bright glass LED Tube Rod of size 4 ft complete all as specified and directed . Make Havells/ Wipro/ Philips

S & F wall mounted extruded PVC housing high quality indoor batten LED tube 20 watt colour temperature 6500 K (4' long) lumen 2000 - 3000, PF> 0.9, THD less 10% diffused connecting with three core flexible copper wire from connecto to ceiling rose/angle holder as per existing site requirement including taking down old conventional type tube light fitting as directed by Engr-in-charge. Make : Havells or equivalent in Crompton / Wipro/ Philips

Taking down old unserviceable fitting, and S & F New genration energy saving environment friendly long life LED street light 25 Watt made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having TOP Opening seprate driver compartment with IP66 Protection and impact resistance of IK07 Building security lights. Make : Havells/ Wipro/ Philips

Supply and fix in repair ultra bright LED PLL with very high efficacy suited for installation in existing 2G11 lamp holder to give glare free light of capacity 18 watt, 4 pin suitable for existing fitting and all as specified and directed Make : Havells/Wipro/HPL/PHILIPS

Taking down old Unserviceable & Supply and Fixing Plano Surface 4x1 G2 Version, 36 Watt Recess mounting LED Light fitting including Suspended Chain arrangement with neccessary fixture,LED Lamp with CRCA housing White powder coated finish and polycarbonate diffuser, LED Fixture system wattage 36 watt,140V -270 V AC,System lumen out put min 3600 lumen in 36 watt with 5700 K CCT with PF>0.95 CRI>=80 and with <=10 % THD, with Min 2.5 KV surge protection in Built complete LED fixture with BIS Mark and R Registration no. Make : Cat Part-PLANOSUR4X1PLS36LED857G2S or equivalent PHILIPS/WIPRO

Taking down old unserviceable Tube light fitting of any type and S & F Suspended Architectural LED 40 Watt fitting with CRCA white powder Coated housing high quality indoor batten LED tube 40 watt colour temperature 5700 K (4" long) lumen 3700 -4100, PF> 0.95, THD less 10% diffused connecting with three core flexible copper wire from connector to ceiling rose/angle holder as per existing site requirement as directed by Engr-in-charge. Make : Cat Part- CONSTA 1144LP40WLED857SPCWH or equivalent PHILIPS/WIPRO/Crompton

Supply and fix in repair of LED Driver suitable for recess mounting LED Light fitting 32W to 42W watt of (any Make) 600 mm x 600mm size. Make : Crompton / bajaj/ Havells/HPL/Syska

Supply & fix PIR Motion sensor of detection range 360 , detectction distance more than 6 mtr,installation height 2.5 to 4 m and detection movement speed .06-1.5 m/s including necessary wiring with 2.5 sqmm three core multi stranded copper condcutor 1100 v grade from light/ main board to sensor all as specified and directed. Make : Crabtree Product code ACSBA005 equivalent

Supply & fix PIR surface mounted Motion sensor of detection range 360 , detectction distance more than 20 mtr,installation height 2.5 to 6 m and detection movement speed .06-1.5 m/s including wiring with 2.5 sqmm three core multi stranded copper condcutor 1100 v grade from light/ main board to sensor all as specified and directed. Make Crabtree: Product code ACSBA003 equivalent

S & F for sheet metal enclosure MCB DB VTPN 12 way with 200 Amps rated bus bar 415 volts double door with magnitic locking system complete all as specified and as directed. Make- Standard, Indoasian,L&T

S & F for sheet metal enclosure MCB DB TPN 8 way with 200 Amps rated bus bar 415 volts double door with magnitic locking system complete all as specified and as directed. Make- Standard, Indoasian,L&T

S & F for sheet metal enclosure MCB SPN DB way with 200 Amps rated bus bar 240 volts double door with magnitic locking system complete all as specified and as directed of following size. Make- Standard, Indoasian,L&T

(a) SPN DB 8 way

(b) SPN DB 4 way

M&L for sub main wiring but using two single core multistranded PVC insulated copper conductor FRLS Cable of size 2.5 sqmm 1100 volt grade drawn into PVC conduit of size 25 mm dia including 2.5 sqmm. PVC multi standard copper conductor FRLS cable in green colour for continious earthing including taking down old unserviceable/burnt wiring of any type or size complete all as directed by Engr-in-Charge.

M&L for sub main wiring but using two single core multistranded PVC insulated copper conductor FRLS Cable of size 4 sqmm 1100 volt grade drawn into PVC PVC conduit of size 25 mm dia including 4 sqmm. PVC multi standard copper conductor FRLS cable in green colour for continious earthing including taking down old unserviceable/burnt wiring of any type or size complete all as directed by Engr-in-Charge.

M&L for sub main wiring but using two single core multistranded PVC insulated copper conductor FRLS Cable of size 6 sqmm 1100 volt grade drawn into PVC PVC conduit of size 25 mm dia including 6 sqmm. PVC multi standard copper conductor FRLS cable in green colour for continious earthing including taking down old unserviceable/burnt wiring of any type or size complete all as directed by Engr-in-Charge.

Taking down old submain wiring and M&L for sub main wiring with four single core multistranded PVC insulated copper conductor FRLS Cable of size 4 sqmm 1100 volt grade drawn into PVC PVC conduit of size 25 mm dia including 4 sqmm. PVC multi standard copper conductor FRLS cable in green colour for continious earthing including taking down old unserviceable/burnt wiring of any type or size complete all as directed by Engr-in-Charge. Note: Four single core cable, earth wire and conduit / casing capping shall be measured as one length.

Taking down old submain wiring and M&L for sub main wiring with four single core multistranded PVC insulated copper conductor FRLS Cable of size 6 sqmm 1100 volt grade drawn into PVC PVC conduit size 32mm of suitable size including 6 sqmm. PVC multi standard copper conductor FRLS cable in green colour for continious earthing including taking down old unserviceable/burnt wiring of any type or size complete all as directed by Engr-in-Charge. Note: Four single core cable, earth wire and conduit / casing capping shall be measured as one length.

S & F for MCB TPN rated capacity 63 Amps, 415 volts breaking capacity 16 KA complete all as specified and as directed. Make - Standard/indoasian/L&T

S & F for MCB TPN rated capacity 40 Amps, 415 volts breaking capacity 16 KA complete all as specified and as directed. Make - Standard/indoasian/L&T

S & F for MCCB rated capacity 25 to 100 Amps, 415 volts breaking capacity 16 KA, as per existing complete all as specified and as directed. Make - Standard/indoasian/L&T

S & F for MCB Single pole and neutral (SPN) rated capacity 32A to 40A , 240 volts breaking capacity 10 KA complete all as specified and as directed. Make - Standard/indoasian/L&T

S & F for MCB Single pole (SP) rated capacity 6 to 32 A, 240 volts breaking capacity 10 KA complete all as specified and as directed. Make - Standard/indoasian/L&T

S & F in repairs thermostats ISI marked as required at site for geyser of capacity 25/35/50 Ltr of any make complete all as directed by Engr-in-charge

S & F in repairs of safety valve/high pressure valve ISI marked as per site requirement or complete all as directed by Engineer-in-Charge.

S & F in repairs heating element of rating 1.5/2 KW as required at site including rubber washers complete all as specified and directed by Engr-in-charge..

S & F in repairs of PVC pipe with brass hexagonal adopters both side, suitable for 15 mm dia pipe 60 cm long for cold water connection complete all as specified and directed by Engineer-in-charge.

S & F in repairs metal braided PVC/CP pipe with brass hexagonal adopters both side, suitable for 15 mm dia pipe 60 CM long for hot water connection complete all as specified and directed by Engineer-in-charge.

S & F in repairs, non return valve 15 mm dia of brass, ISI marked all as specified and directed by Engineer-in-charge.

M & L for refixing of geysers of any capacity to walls by grouting with new nut,bolts and refiixng the geysers at a location directed by Engr-in-charge complete with all necessary pipe connections, testing.

S&F plug top 16 Amps flush type

M & L for stop valve, cast copper alloy screw down high pressure crutch handle, screwed both end for iron pipe suitable for 15 mm bore

Taking down carefully ceiling fan of any make, size from its location,dimantling complete fan ,examine complete parts thoroughly, servicing oiling, greasing all parts and complete overhauling of fan including checking of winding, replacement of small parts such as split pin, nut bolt, screw and assembling complete fan and make fully functional with replacement of old unservicable rewinding with new rewinding of fan, refixing the fan to its original position including replacement of three core PVC insulated multi strandard copper wire 0.5 sq mm 1100 Volts grade from fan connector to ceiling rose complete all as directed. Note : Ball bearing, bush fan blade etc will be measured and paid seperately under relevant item of schedule as supply only.

All as per item No 52 above but Exhaust Fan of sweep 150-350 mm

Supply only ball bearing(DE/NDE) to match the existing make suitable for 1200/1400 mm sweep ceiling fan including greasing complete all as specified and directed by Engr-in-charge. Make : SKF/NBC or equivalent

Supply only ball bearing to match the existing make suitable for 150-350 mm exhaust fan inclduing greasing. Make : SKF/NBC or equivalent

S & F only fan regulator suitable for 1200/1400 mm ceiling fans (electronics step type) Make-Anchor

Supply only capacitor 2.5 mfd for ceiling fan all as specified and as directed by Engr-in-charge Make:Havells/Epcos)

Supply only capacitor 4 mfd for exhaust fan all as specified and as directed (Make:Havells/Epcos)

Taking down carefully old unserviceable existing copper strip of size 20 mm x 3 mm and Supply & fix copper strip 20 mm x 3 mm complete with saddles and fixing screws for fitting the strip all as specified and directed by Engr In Charge.

Supply & fix in replacement /repair Aluminium strip 25 mm x 3 mm complete with saddles and fixing screws for fitting the strip complete all as specified and directed by Engr In Charge.

Fixing in repair aluminium strip 25 mm x 3mm complete with saddles and screws for fitting the strip.

Supply &Fix in repair GI strip 32 mm x 6 mm complete with saddles and screws for fitting the strip.

M&L for Air terminations single pointed Aluminium rod 12 mm dia and 300 mm long with necessary fixing copper wire with copper lugs and suitable nut bolt arrangements on roof including taking down old complete all as directed.

Supply & fix four pointed ( centre tip 150mm and side spike 75mm) copper spike lighting arrester heavy duty copper rod opf size 15 mm dia both end screwed for easy fitment and 1.5mtr long and heavy duty copper base plate duly drilled on four corners of size 75mm x 75mm ,with necessary fixing arrangement on Top/side of pole complete including taking down old complete all as spcified and directed by Engr- in - Charge.

Supply and fix test point terminal block made out of gun metal or phosphorus bronze size 75 x 75 x 25 mm drilled and screwed including 3 Nos 8 mm dia 25 mm long hex head screw including taking down old complete all as spcified and directed by Engr- in - Charge.

Material & labour for fixing of 50 mm bore GI Pipe medium grade galvanised 1.5 mrt. long fixed on wall with proper fixing and clamping of strip & 1.5 mtr to 300mm long copper/Aluminium lightening arrester rod with all fitting and fixed complete to wall or roof top of bldg. Note: Joints shall be made with welding to get proper conductivity

Material and labour in repairs for GI earthing complete with GI earth plate 600 mm x 600 mm x 6 mm thick burried directly in ground (earth pit not less than 3.25 mtr below nor mal ground level ) with top edge of the plate not less than 3.25 mtr below normal ground level connected to GI earth strip of size 20 x 3 mm by means of bolts check nuts and washers of brass/ bronge all as shown in electrical plate no 3 connecting to earthing test point all as specified and indicated and testing on completion including excavation earth work drilling holes for electrode PCC pit in PCC 1:2:4 type B1 using 20mm graded stone aggregate, RCC precast cover 1:2:4 type B1 using 20mm graded stone aggregate, GI pipe 40 mm dia (medium grade) and MS funnel, wire mesh and protection pipe of GI of suitbale size upto 7.5 mtr length including charcoal in black cotton soil as required at site to achieve the earthing result and common salt, excavation earth work etc in any type of starta complete all as per the sketch given in particular specification, GI wire suitable size and length for continuity earth wire from test point to main distribution Board etc., complete all as directed. Note:- Quoted rates shall be deemed to include for earth strip with protection pipe up to 7.5 M length. All the joints shall be made with welding to get proper conductivity. Rate required deemed to be including excavation by compressor machine or breaker for soft /disintegrated rock to required depth and results of earthing should be below 1 Ohm.

M & L for maintenenace/servicing including attending fault on call basis and repairs philiux / Meditech major with standard /LED OT light of capacity (140000Lux or as per exisiting) Make Phililux / Technomed, as prescribed in repairs and maintenance manual, including fixing/replacement of spare parts (if required). The maintenance schedule shall be under of each OT (i) Dismantling the complete OT light fittings (ii) Checking and servicing/repair and maintenance of OT Lights (iii) After the repairing/servicing/Maintenence, reinstallation, realignment of OT fittings Note:- (i) Spares requried for above maintenece will be measured and paid separeataly under relevant items of Sch 'A' (ii) Servicing of the above item shall be carried out by the authorized service providers specially for OT light. (iii) Any break down during the contract period should be attended by contractor with in a day.

M & L maintenance /servicing including attending fault on call basis and repairs, Phililux Mobile OT light capacity Make: Phililux, as per prescribed in repqirs and maintenance manual, including fixing / repalcement of spare parts (if required). The maintenance schedule shall be under of each OT (i) Dismantling the complete OT light fittings (ii) Checking and servicing/repair and maintenance of OT Lights (iii) After the repairing/servicing/Maintenence, reinstlltion realignment of OT fittings Note:- (i) Spares requried for above maintenece will be measured and paid separeataly under relevant items of Sch 'A' (ii) Servicing of the above item shall be carried out by the authorized service providers specially for OT light of Philips make. (iii) Any break down during the contract period should be attended by contractor with in a day.

Supply only diffusers for for Phililux major with standard OT light Make: Philips or recommended by manufacturer or service provider.

Supply only Reflector for Phililum major with standard OT lights Make: Philips or recommended by manufacturer or service provider.

Supply only Bulb Holder for Phililum major with standard OT light Make: Philips or recommended by manufacturer or service provider.

Supply only Halogen Bulb 12 V 50 Watts for Philium major with standard OT light Make: Philipsor recommended by manufacturer or service provider.

Supply only filter glass for Phililum major with standard OT light Make: Philipsor recommended by manufacturer or service provider.

Supply only Rotary Switch CL 05 for Phililux major with Standard OT light Make: Philipsor recommended by manufacturer or service provider.

Supply obly Rotary Switch CL 06 for Phililux major with Standard OT light Make: Philipsor recommended by manufacturer or service provider.

Supply only Condensor CL 01 for Phililux major with standar OT light Make: Philipsor recommended by manufacturer or service provider.

Supply only fuse holder and base for major with standerd OT light light Make: Philips or recommended by manufacturer or service provider.

Supply only Condensor CL 02 for Phililux major with standard OT lights Make: Philips or recommended by manufacturer or service provider.

Repair to CVT 12V 250 by replaceing following burnt items :- (i) Internal wiring as per existing size. (ii) Burnt MCB of existing capacity (iii) Replacment of multi tap ,stepdown transformer of existing capacity, (iv) Trial and testing completely directed by Engineer in charge

Repair to CVT 12V 500 by replaceing following burnt items :- (i) Internal wiring as per existing size. (ii) Burnt MCB of existing capacity (iii) Replacment of multi tap ,stepdown transformer of existing capacity, (iv) Trial and testing completely directed by Engineer in charge

LED Panel with 19 LED bulb yellow and white combination with Teflon coated wire suitable for Modle HOSPI CT 5+5 HEX

Controller touch Panel suitable for Modle HOSPI CT 5+5 HEX

SMPS input 220 V AC output 24 V 5 amp DC suitable for Modle HOSPI CT 5+5 HEX

Hydraulic arm set with base plate suitable for Modle HOSPI CT 5+5 HEX

30 Minute battery backup system unit suitable for Modle HOSPI CT 5+5 HEX