SPECIAL REPAIR TO CARRYOUT ROOF TREATMENT IN OR MD ACCN BLDG NO P-200, P-201, P-202, P-297, P-346, P-416 AND P-417 AT HAMID VIHAR AND CERTAIN B/R AND E/M ITEMS IN SAMPLE ROOM AT HQ CE UNDER JAIPUR MIL STN

Amount

Demolition of PCC in roof covering, Kerbs, roof kerbs, benching, coved fillets etc including old decayed water proofing tratment of any type all as directed.

M&L for surface preparation by removal of all loose particle to ensure clean, smooth and dry surface and laying 25mm thick PCC type B-0, (1:2:4) using 12.5 mm graded stone aggregate finished even & smooth without using extra cement to cover negative slope into prop with WPC @ 3% weight of cement complete all as directed. (Note : WPC shall be measured and paid separately)

M&L rendering 10mm thick in cement mortar (1:3) on concrete surfaces to receive water proofing treatment finished even and fair complete all as specified.

M&L for painting with one coat of polymeric primer @ 0.40 kg per sqm conforming to IS: 3384, a layer of APP based polymeric memberance (3 mm thick minimum weight not less 3.5 kg/sqm) and Side over lap shall be 75 mm and ends shall be 100 mm and embeding membrane into spout pipe, roof down ward facia and shall sealed by torch application with bitumen 30/40 grade at ends, complete all as specified. Applicatiion of polymeric memberance shall be torch application all as per manufacturer instructions. (Note : Work will be carried out through authorized applicator of company only)

M&L preparation of APP based polymeric surface and applying two coat of aluminium paint all as specified & directed.

M & L for PCC tiles of size 250 x 250x 22 mm including 20mm thick screed bed of CM 1:4 with grey cement & no pigment set jointed and pouinted in neat cement slurry in as in roof cut & polished complete all as directed

M&L for cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills,sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting exc 10cm but n exc 20 cm girth complete all as directed

Taking down cment plster or cement lime plaster on PCC/ stone surace / brick surfaces including raking out joints hacking for key scrubbing down with water etc all as directed.

M&L for rendering 15mm thick in cement mortar 1:4 on stone masonry surfaces or surface other than fair face of brick work of walls, finished fair & even.

M&L for rendering 15mm thick in cement mortar 1:6 on stone masonry surfaces or surface other than fair face of brick work of walls, finished even & smooth without using extra cement complete all as directed

M&L for rendering 10mm thick in cement mortar 1:4 on concrete surfaces including finished fair & even on ceiling.

Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concretebut excluding ashlar facings, dressed stonework and precast concrete articles.

M&L for brick work with subclass 'B' bricks, straight or curved on plan exc 6 m mean radius built in cement mortar 1:6

All as per serial item No 13 above but except bricks.

M&L for brick work with subclass 'B' old size bricks, straight or curved on plan to any radious half brick half brick thick walls built in cement mortar 1:4

M&L for rendering 10mm thick in cement mortar 1:4 on fair faces of brick masonry or concrete surfaces of walls, finished even & smooth without using extra cement.

M&L for rendering 10mm thick in cement mortar 1:6 on fair faces of brick masonry or concrete surfaces of walls, finished even & smooth without using extra cement.

M&L for three coats of white wash on newly plastered surfaces of ceiling including preparation of surfaces.

M&L for preparation of new plastered surfaces and applying two coats of oil bound distemper of approved shade/tint over a coat of primer on walls all as specified

M&L for preparation of new plastered surfaces and applying two coats of cement base paint of approved shade on walls all as specified

Demolition & breaking up drain pipes AC, (Salt glazed ware, AC or Reinforced concrete) set in CM Internal dia of pipe 100 mm

S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors, Type 'B', ISI marked of 110mm bore (pressure should not be less than 5 kg/cm^2)

S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls, Type 'B', ISI marked of 110mm bore, including clamping arrangement to wall (pressure should not be less than 5 kg/cm^2)

S&F PVC (SWR) bend of any radius of 110mm bore with access door complete all as directed

S&F PVC (SWR) Socket 110mm with Access door.(pressure should not be less than 5 kg/cm^2) complete all as directed

Taking up or down the existing serviceable GI steel tubing of 15mm bore and connection, including cleaning and refixing old steel tubing and connection new or old position (walls, ceiling, floor, trenches etc).

All as per Ser Item no. 26 above but size 20 mm bore

S&F in repair galvanised steel water rubing of 15mm bore, 'medium grade' with all fittings and fixed complete to walls and ceilings or laid in floors.

All as per Ser Item no. 28 above but size 20 mm bore

Dismantling 500 ltr water tank and M&L new 500 ltr tripple layer threaded type cover, ISI marked rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position & including 20mm PVC ball valve all as specified in ssr part-I complete all as directed

M&L for providing rectangular, raised platform of max. hight 20 cm below the tank and base dia 25 cm more than the external dia of tank for PVC cylendrical tank of capicity 500/1000 liters using PCC 1:3:6 type C1 using 20 mm graded stone aggregate with smooth finish including necessary form work etc. complete all as directed

Disconnecting existing tanks, seetting asside (or lowering if required) for repairs, cleaning, etc and hositing if required reconnecting and re-fixing in position capicity exc 250 ltr & nexc 500 litre including cleaning repairing etc, all as specified and as directed.

S&F stop valve, 15mm bore, cast copper alloy, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed.

All as per Ser Item no. 33 above but size 20 mm bore

Dismantling of mild steel work of any descriptions complete all as direceted.

S&F rolled mild steel work as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming to Fe-410-WA (Gde E-250) quality 'A' all as specified

Preparing previously untreated steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of zinc chrome complete all as direceted.

Supply only integral water proofing compound complete all as specified.

S&F Aluminium flat section of 25mm x 4mm including all fixing/ anchoring arragement on parapet wall of roof to end termination of APP Membrane.

Supply & fix mild steel pressed handles, oval type 100mm size complete all as specified

Supply & fix brass handles, cast type polished bright 100mm complete all as specified make Godrej or equivalent as approved by GE

Supply & fix Aluminium handle, cast type, anodised 100 mm size, complete all as specified.

S&F mild steel sliding door bolts, plate type, stove enamelled black, with bright bolts less than 12mm dia with and including a minimum of 6 bolts and nut complete all as specified.

S&F Brass, sliding door bolt 150mm size with sand or die-cast brass hasp, staple or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed make Godrej or equivalent as approved by GE

S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple 150 mm (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed

S&F mild steel barrel tower bolt of length 100 mm stove enamelled black, with bright bolt and fixedcomplete all as specified and as directed.

S&F aluminium anodised barrel tower bolt of length 100 mm of extruded section complete all as specified and as directed.

S&F brass barrel tower bolts 100 mm, with cast barrel,bolts and fixed complete all as specified and as directed. Make : Godrej or equivalent as approved by GE

S&F short body Bib taps, cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for 15 mm bore iron pipe or for brass ferrule. Make: Jaguar or equivalent as approved by GE

S&F long body Bib taps, cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for 15 mm bore iron pipe or for brass ferrule Make: Jaguar or equivalent as approved by GE

S&F long nose Bib taps, cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for 15 mm bore iron pipe or for brass ferrule. Make: Jaguar or equivalent as approved by GE

S&F pillar tap fancy type 15 mm dia cast copper alloy, with capstain heads, chromium plated screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shank and fly nuts screwed for iron pipes and fixed complete all as specified and as directed. Make : Jaguar or equivalent as approved by GE

S&F swan neck pillar tap fancy type 15 mm dia cast copper alloy, with capstain heads, chromium plated screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shank and fly nuts screwed for iron pipes and fixed complete all as specified and as directed. Make : Jaguar or equivalent as approved by GE

S&F 15 mm stop valve cast copper alloy, screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipe or union 15mm bore. Make : Jaguar or equivalent as approved by GE

S&F 15mm bore bib tap two way,cast copper alloy chromium plated.fancy type with capston head,screwed down, screwed for iron pipe or for brass ferrule. Make : Jaquar Cat Part No QQT -7041 or equivalent as approved by GE

S&F central hole single lever wash basin mixer 15mm dia 450 mm Make : Jaquar Cat part No QQT 7001 B or equivalent as approved by GE.

S&F central hole single lever wall mixer 15mm dia Make : Jaquar or equivalent as approved by GE.

S&F cromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union. Make: Jaguar or equivalent as approved by GE

S&F Tubular towel rail, brass chromium plated, 20mm dia, D type, 60Cm long between flanges complete all as specified and as directed. Make: Jaguar or equivalent as approved by GE

Dismantling of floor hearth or wall tiling including cement mortar bedding but not backing and rubbish off the primises complete all as directed.

Non Skid ceramic tiles 7 to 8 mm thick, coloured (squares/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match bedded over and incl 15 mm thick screed bed in CM (1:6) complete all as specified and directed. Make : kajaria or equivalent as appoved by GE

M&L for Vitrified ceramic tiles 10mm thick (square/rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match bedded over and incl 15 mm thick screed bed in CM (1:6) complete all as specified and directed. Make : kajaria or equivalent as appoved by GE

M&L for coloured glazed ceramic tiles 450mm X 350mm X 7 to 8mm thick in vertical surfaces 7 to 8mm thick set and jointed in neat cement slurry and pointed in coloured cement to match including backing coat 10mm thick in cement plaster 1:4 complete all as specified and as directed. Make : kajaria or equivalent as appoved by GE

S&F coloured glazed ceramic tiles 200mm X 300mm X 7 to 8mm thick in vertical surfaces 7 to 8mm thick set and jointed in neat cement slurry and pointed in coloured cement to match including backing coat 10mm thick in cement plaster 1:4 complete all as specified and as directed. Make : kajaria or equivalent as appoved by GE

M&L for 12mm thick terrazzo topping with 2 to 4mm size marble aggregate including grinding and polishing in floors with grey cement and pigment and incl 15 mm thick screed bed in CM 1:6 complete all as specified and as directed

S&F factory made, solid panel PVC door shutter, 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frames shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, supplying and fixing in the frame at site as specified.

Providing and fixing factory made uPVC white colur sliding window three track made of extruded profles with wall thickness of 2.3mm (0.2mm) Windoow profile with hollow secton with multichamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm) Sliding meah Sash (42mm x 57mm) . Slide interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be mitered cut and fusion welded at all corners, including railing of hles for fixing hardware and drainage of water etc. making arrangement for fising of hardware. EPDM gasket 1.2, 1-0.2mm thick galvanized steel frame (30mmx18mm) 2 Nos, sliding sash (30mmx 18mm) sliding meash sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to wall with 8mm x 100mm long fasteners. Hardware Touch lock of Zinc alloy (white powder coated), Steel roller system, Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories (Note. the unit rate qoted by contractor excludes cost of glass and includes all other connected accessoriees. Net opening will be measured for payment purpose) Area n exc 2.00 Sqm Each all as specified in TD No CEJZ/TD/2021/S-01 Sh. 1/1 Dt 28 Jan 2020.

S&F powder coated any colour (minimum thickness of powder coating 50 micron) anodised aluminium window and ventilator shutters, fixed / sliding type without sash bar, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber packing,locks, anodised alumnium snap beading, screws etc. complete all as specified. Make Jindal or equivalent as approved by GE.

M&L for 2nd class hardwood plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and directed

S&F Factory made 35 mm thick, 2nd class hard wood (Hollock), glazed and skeleton shutters open rebated and prepared to receive glass/ gauge etc (without sash bars), edges of framing plain chamfered or rounded, fitted with cut and mitered beads for securing glass etc for doors, size of members as specified in clause 8.24 (a) of MES Schedule Part-I Section-8, complete all as specified.

M&L for 10 mm thick sheet toughened glass with logo embossed complete all as specified and directed.

Providing and fixing suspended false ceiling extra microperforation size of 600 x 600 x 15 mm Ceiling Tiles over suspension metal system (MICRO LOOK) designer grid (15 mm grid 8mm return) SILHOUETTE X L 15 MM (NOMINAL) including necessary hanging system arrangement which is required to be made from existing RCC roof /stone /slab /ac sheet of existing ceiling complete all as specified and directed. (Make : Armstong ORCAL or equivalenet as approved by GE)

M&L for prelaminated particle board 12mm thick exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with & incl screws, hinges in aluminium works complete all as specified and as directed

M&L for CP peg set (coat hook) of 5 complete all as specified and as directed

M&L for Wall treatment (stone cladding, textured wall,exposed brick wall) including backing coat of 15mm thick in cm 1:4 complete all as specified and as directed complete all as specified and as directed

M&L for Paints interior emulsion of different shades and colour (all types) complete all as specified and as directed

S&F towel rack, brass chromium plated, 60Cm long between flanges complete all as specified and as directed. Make: Jaguar or equivalent as approved by GE

S&F hand towel stand brass chromium plated complete all as specified and as directed. Make: Jaguar or equivalent as approved by GE

S&F fancy type brass mortice door lock with handle and all accessories with all arrengements complete all as specified and as directed. Make : Godrej or equivalent as approved by GE

S&F GI tubing medium grade with all fitting 15 mm bore fixed to wall or concealed or fitted to ceiling or laid under floor.

S&F PVC (SWR) pipes 110 mm dia single socketed in length with rubber ring joints liad in trenches or in floors complete all as specified and as directed.

S&F Vitreous china wash down water closet EWC) white semi-pedestal pattern (anglo indian type) complete, including connection to drain pipe and to flushing pipe antisyphonage pipe plastic water closet seat back closed pattern with flat bottom cover and mild steel chromium plated or aluminized hinging device, incl. jet connections, P-trap, S-trap etc complete all as spd & directed

S&F vitreous china WHB with pedestal White flat back size 550 x 400mm with PVC waste pipe, brass chromium plated waste coupling for glazed ware sinks, basins etc with long screw shank and fly nuts flanged incl fixing only of pillar taps and bedded in red lead in cement and other end fixed, complete all as specified

M&L for Makrana white marble 20mm thick machine cut, bedded jointed and pointed with white cement slurry including cutting and polishing types complete all as specified

M&L for black granite (of any type) 20mm thick machine cut, bedded and jointed with grey cement slury and pointed with white cement with admixture of pigment to match the shade of granite stone including cuting and polishing complete all as specified & directed.

M&L for lakha red granite (of any type) 20mm thick machine cut, bedded and jointed with grey cement slury and pointed with white cement with admixture of pigment to match the shade of granite stone including cuting and polishing complete all as specified & directed.

M&L for 4.0 mm thick sheet glass, ordinary quality pin headed/frosted/plain and glazing with aluminium beads and rubber gaskit in square exc 0.5 sqm in each pane frosted on one side complete all as specified and directed.

S&F structural glass (glazing) to facade work incl aluminium grid and necessry arrangements fixed to walls complete all as specified & directed.

S&F CP soap holder of appoved quality complete all as specified and directed.

S&F tooth brush holder of appoved quality complete all as specified and directed.

S&F mirror rack complete all as specified and directed.

M&L for preparation & complete removal of old surfaces of wall and applying two coat of oil bound distempering over one coat of primer including chalk whiting over 2mm thick paris putty over plastered surface complete all as specified and as directed.

S&F Harrison rails, stainless steel, chromium plated with fixing brackets, stops, rollers etc complete all as specified and as directed.

M&L for Solid PVC Wall Lining consisting of 5mm thick wooden grain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing

M&L for 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing.

S&F powder coated any colour (minimum thickness of powder coating 50 micron) anodised aluminium frame for doors/windows/ ventilators with one or more rebates including joining cleat for fixing etc complete all as specified.

S&F Butt hinges, heavy weight, cold rolled mild steel, and fixed etc complete all as specified.

S & F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised etc complete all as specified.

Supply and fixing wooden display board of 1.8 m x 2m size, 25 mm thickness to display the items from sr no 100.01 to 100.10 of BOQ with sunmica sheet of superior quality and outer frame including stand made of stainless steel, having lighting with decorative light and design such that items are clear and visible including welding, cutting and jointing fittings in wall or in ground as specified and directed by Engineeer in charge Note : (i) Design of Display Board and items layout will be approved by GE (ii) Name of items on display board will be wriiten in black colour with white background

Supply only LED Luminairy 10 watt complete all as directed

Supply only LED Bulk head fitting 8 head fitting 8 watt complete all as directed

Supply only 20 W, 200 lumen 2700K LED tube light batten complete all as directed

Supply only Calling Bell Ding Dong make Anchor or equivalent as approved by GE

Supply only Capacitor of capacity of 6 MFD

Supply only Capacitor of capacity of 25 MFD

Supply only MCB single pole 230 Volts 25 Amp Type B ,10ka

Supply only MCB double pole 230 Volts 40Amp Type B ,10ka

Supply only MCB three pole 440 Volts 63 Amp 16 KA

Supply only PCB of AC of Capacity 1.5 TR

All as per item No 100.00 above but for size 1.0 m x 2.0 m display board with 25 mm thickness and fixing of following items of BOQ from 101.01 to 101.11

Supply only Switch 5/6Amp piano type

Supply only Switch 16Amp piano type one way

Supply only Switch P/T 6Amp one way

Supply only Switch P/T 6Amp two way

Supply only Sockets 2-in-1, 3 pin 6 Piano type

Supply only Sockets piano type 2-in-1, 3 pin 6 & 16

Supply only Sockets P/T 06 Amp one way

Supply only 16 A 6 pin switch socket combination with junction box

Modular type 1 module step fan speed controller switch

Supply onlyCeiling rose 65x50mm 2/3 pin

Supply onlyElect fan regulator P/T switch size

Supply and fixing following items from Item No 102.01 to 102.20 for display in samplae room at HQ CEZ Jaipur including fixing in wall / surface and lighting withing decorative light or as specified by Engineer in Charge Note : (i) Point wiring for decoarative light and material deemed included in quated rate by tenderer (ii) Name of items on display board will be wriiten in black colour with white background

Supply only PVC conduit round type 20/25 mm

Supply only PVC cashing capping 15x16 mm 6' Long

Supply only MS sunken boxes rectunglar type

Supply only MS sunken boxes rectunglar type modular

Supply only LED recces mounting luminaries 2'x2' 36 watt

Supply only MCCB TP 440 Volts 25 KA of cap 63 Amp

Supply only MCCB TP 440 Volts 35KA of cap 200 Amp

Supply only MCCB TPN 440 Volts 35 KA of cap 100 Amp

Supply only Earthing Wire 4/6 Sqmm GI

Supply only Earthing wire 32x6 mm strip

Supply only GI Plate earthing 600mmx600mmx6.3mm

Supply only Hot water connection PVC of 20 mm and 300 mm long

Supply only Cold water connection PVC of 25 mm and 300 mm long

Supply only Relays of different sizes for AC/Fridges/Water cooler

Supply only GI Pipe medium grade of bore 100 mm dia

Supply only NRV of capacity 80 mm complete

Supply only Submersible cable flat type 3 core of size 10 sqmm

Supply only Motor starter DOL type of capacity 5 HP, 13-20 Amp

Supply only OHT aviation light of capacity 15/20 Watt with having 3 bulbs

Supply only Flood light luminaries LED Type 60 watt with high pressure 90 lumen/watt. The luminaire shall have rated system lifetime of 50,000 burning hours before reaching at L70. The luminaire should have cool white colour temperature (CCT > 5000K) and a CRI >70. The luminaire shall meet IP 66 rating & IK05 rating with THD < 20% and PF > 0.9. fitting.

Schedule of Credit

Sh. Manoj Nagar

M/S ROHIT CONSTRUCTION

Stuti Trading Company

M/s Radhey Enterprises