Repair and Reconstruction of damaged portion Restoration Renovation for Arulmigu Thirukadeeswarar Thirukoil at Nanalkadu, Srivaikuntam Taluk, Thoothukudi district.

Amount

Dismantling clearing away lime concrete etc., complete as directed by departmental officer

Labour Charges for Old Stone Removing: Chitranvanam, Padma Jagati, Adhistanam, Kandam, Pattiyal, Jagati, Kumudagam, Aswapadam, Sthamaba, Sthambam, Kalasam, Thadi, Kudam, Palagai, Veerakandam, Bodhiyal, Uthiram, Kambu, Eludham, Kabothagam, Viyalam, Koodu, Ull Vari, Pavukkal, Thun, Flooring, Nilaikal, Bodhiyal Thani, Uthiram.etc complete as directed by departmental officer

Labour Charges for Old Stone Removing: Thanithun, Uthiram, Bodhiyalpillar etc complete as directed by departmental officer

Labour charges for old stone removing / Flooring etc complete as directed by departmental officer

Dismantling clearing away Brick masonry in lime mortar etc., complete as directed by departmental officer

Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid over silver oak joists of size 10cm x 6.5cm spaced at about 75cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation. (Payment for centering shall be given after the concrete is laid)

Providing and laying in position, standardised concrete Mix M20 grade in accordance with IS 456-2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of work with minimum cement content of 325 Kg/m3 and maximum water cement ratio of 0.55 including admixyure (Plasticiser / super plasticiser ) in recommended proportions as per : 9103 to accelerate retard setting of concrete, improve workability without impairing strength and durability with about (5Cum) 7730kg. og 0mm machine crushed stone jelly and with about (3.3cu.m.) 5156kg. of 10-12 mm machine crushed stone jelly with about 4.79Cu.m. )7670kg. of sand, but excluding cost of reinforcement grill and fabricating charges centering and shuttering and also including laying , vabricating with mechical vibrators, finishing curing etc., and providing fixtures like fan clamps in the RCC floor/ roof slab where ever necessary without claiming extra ,etc., complete.complying with standarde specification and as directed by departmental officers.The coarse and fine aggregates to be used should compling with the requirements of IS Standards. ( No separete payment will be made by the department for excess usage of materials) Foundation and basement

Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel grills for all RCC works as per design given including cost of steel and G.I. binding wire in all floors etc. complete complying with standard specification. (Contractor has to make his own arrangements for the supply of steel and binding wire)

Supply of new stone for carrying out Garpagraham, Arthamandapam, Maha Mandapam, Thirumathil flooring uthiram pavukal thanithun and other Temple Structures upto 10 feet length including conveyance loading unloading etc., complete

Labour Charges for Stone ReFixing: Aswapadam, Sthamaba, Sthambam, Kalasam, Thadi, Kudam, Palagai, Veerakandam, Bodhiyal, Uthiram, Kambu, Eludham, Kabothagam, Viyalam, Koodu, Ull Vari, Pavukkal, Thun, Flooring, Nilaikal, Bodhiyal Thani, Uthirametc complete as directed by departmental officer

Pointing the cut stone joints for wall with lime Mortor1:1.5 20mm thick including cost of materials such brush and watering, curing etc complete, as per standard specifications

Cut stone pointing for with Lime Mortor1:1.5 20mm thick excluding cost of stone including, curing etc complete, as per standard specifications

Labour charges for refixing cutstone flooring

Scaffolding charges for Vimanams and Gopurams with casurina posts coconut or palm trees wherever necessary for main, form work and providing with net lawn / PVC mesh coverings, providing ladder rangements, country wood plank for working, inspection etc. omplete, hire charges only for erection, maintenance and removing the same on completion of the work. 15' height

Providing vargapoochu over the walls of Kopothagam with lime Mortar 1:1.5 complete including shaping Mukapathrams matha nasi koodu and all ornamental works to proper shape by embedding broken chips or shaped chiselled bricks, rough plastering and finishing with final ornamental plastering and nayam theervai etc., complete for 100sqft.

Brick work lime Mortar 1.2 ( One lime Two CS sand )using best quality of country bricks of size 8-3/4" x 4-1/4" x 2-3/4" for foundation and basement including curing, etc., complete complying with standard specifiction.

Plastering with lime Mortar 1:1.5 (One lime and one &half CS sand with jaggery gallnut), 12mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers.

Labour charges for Palmunai dressing and refixing the old stone menbers etc., as directed and fixing the same in position including all labour charges for dressing and fixing in position as directed etc., complete. Steps

Labour charges for Palmunai dressing and refixing the old stone menbers etc., as directed and fixing the same in position including all labour charges for dressing and fixing in position as directed etc., complete. Wall

Labour charges for Palmunai dressing and refixing the old stone menbers etc., as directed and fixing the same in position including all labour charges for dressing and fixing in position as directed etc., complete. Pavukal

Labour charges for Palmunai dressing and refixing the old stone menbers etc., as directed and fixing the same in position including all labour charges for dressing and fixing in position as directed etc., complete. Nelaikal

Labour charges for Palmunai dressing and refixing the old stone menbers etc., as directed and fixing the same in position including all labour charges for dressing and fixing in position as directed etc., complete. Thanithun

Labour charges for Palmunai dressing and refixing the old stone menbers etc., as directed and fixing the same in position including all labour charges for dressing and fixing in position as directed etc., complete. Uthiram

Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification.

Weathering course in brick jelly lime concrete using broken brick jelly of size 20mm uniform gauge in pure slaked lime (no sand to be used) to the proportion of brick jelly to lime being 32:12.5 by volume and laid over the RCC roof slab in a single layer of required slope and finished by beating the concrete with wooden beaters of approved pattern, keeping the surface constantly wet by sprinkling lime jaggery water, etc., complete as per standard specification and as directed by the deparmental officers.

Finishing the top of roof with one course of machine pressed tiles of size 200mm x 200mm x 20mm of approved quality set in limeMortar 1:1:5 (One lime and one and half CS Sand) 12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification and as directed by the departmental officers

Supplying and fixing mild steel iron grill for windows ventilators and grill gate etc., including one coat of red oxide primer using M.S angle of size 40 x 40 x 6 mm and grill using 20 x 6mm M.S flat and necessary hold fast with M.S angle of size 40 x 40 x 6 mm - 230 mm long spliced at end is to be provided at appropriate places for fixing the grill etc., complete complying with standard specification. The type design for the grills should be got approved by the departmental officers before execution.

Painting new iron works such as steel grill work etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors excluding cost of priming coat etc., complete complying with standard specification.

Supplying and fixing of Teak wood door including furniture fitting etc., complete as per standard specifications.

Painting with Best varnish two coats for wood worksincluding cost of materials and labour charges etc, complete complying with standard specifications.

Restoration by providing water wash and appropriate methodology to restore the originalities of the existing Cutstone structures inclusive of necessary scaffolding charges, conveyance and all hire charges for all tools and plants and clearing the site after completion of work etc, complete

Scraping the decayed lime plaster from the surface of Vimanams and Gopurams, carefully including isolated bricks or brickwork without damaging the vari vargams, racking out the joints, cleaning the surface with water, including all working in heights, hire charges for special tools, brushes complete superficial area including all folds - 100sft.

Painting with multicolour (Panchavarnam) good water based exterior emulson paints complete for the Vinamans/Gopurams, including cost and conveyance of all materials, lobour charges including Artist painter, working in heights, lifting of material, cost of brushes etc, complete-which including all extra for foldings-100sft, superficial area. upto 15feet

Providing new sudhai vigrahams in the vimanams and swamy goupurams with galvanized iron rod reinforcement of suitable dia with binding wires wherever necessary, shaping the core with broken bricks set in CM 1:3 finishing the same with CM 1:3 bringing to the correct shape (Lakshana) in conformist with silpa sastra inclusive of special ornaments weapons peedam etc., complete and providing CM nayam theervai wherever neceessary,inclusive of cost and conveyance of all materials, such as cement broken bricks, sand G.I. rods, binding wire all labour for working in heights, curing lifting of materials etc., complete including cement painting 2 coats over a primary coat (one vigraham is accountable with one head, 4 hands with weapons, ornwmental costumes etc., as per prathima Lakshana, Vigraham height is measurable from the crown be adopted as detailed hereunder).1'6"- 2'6" ht

Supplying and fixing of Teak wood rafter including conveyance etc., complete as per standard specifications.

Supply and fixing PVC pipe 160mm including labour charges cost of materials etc., complete

Supply and fixing of 2'x 1" teak wood reeper on wall along with run of 50mm x50mm UPVSC casting caping ccable trunking box with necessary clamps and screws rigidly in the gap of the stone walls Data(1)

Supply and fixing of single box type 4'20W LEd fitting with TW round blocks on wall or ceiling with PVC unsheathed copper leads from terminals to the fitting (LED fittings should be of higherend campany make like philips / cromption etc., (DATA -2)

Supply and fixing of Havells LED lowbay 40W fitting with MS clamp set with bolt and nut and to be suspended with SS chain32mm width with end hooles with PVC unsheathed copper leads fro terminal to the fitting (DATA-3)

Supply and fixing of Havells jeta alba flood light 100W LEDfitting with necessary wall grouting clamps with fixing bolts on the ceiling with PVC unsheathed copper leads from terminall to the fitting ( Data 4)

supply and fixing of 48W LED street light fitting with Pressure diecase aluminium housing with IP65 protection with 25mm dia. GI pipe and bend class B) with bend complete on the wall with PVC unsheathed copper leads with MS clamps and Aluminium painting LED fittings should be higher end / philips make (Data - 5)

Supplying and fixing of 450MM 18" almonard wall fan heavy duty (higher end) on wall with connection ( Dat -6)

Supply and fixing of 12 module surface mounting box with combined cover plate plastic fixed with 8Nos 6A 1 way switch and 2Nos 6A universal Plug with Connections (DATA 7)

Supply and fixing of 6 module surface mounting box with combined cover plate plastic fixed with 4nos 6A 1 way switch and 1no 6A universal plug with connections (DATA 8)

Supply and fixing of 18 module surface mounting box with combined cover plate plastic fixed with 14nos 6A 1 way switch and 2nos 6A universal plug with connections (DATA 9)

Supply and fixing of 18 module surface mounting box with combined cover plate plastic fixed with 16nos 6A 1 way switch and 1no 6A universal plug with connections (DATA 10)

Supply and fixing of 20A DP MCB switch in suitable 2 pole sheet steel enclosure with earth connection (DATA 11)

Supply and fixing of 63A AP MCB switch in suitable 4 pole sheet steel enclosure with earth connection (DATA 12)

Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A DP MCB switch as incoming and 6 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only. Higher End (SD 601)

Supply and fixing of 8 way Horizontal Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 63A 4P MCB Isolator as incoming and 24 nos. 6A to 32A SP MCB as outgoing on wall with earth connection only. Higher End (SD 642)

Supply and fixing of 1 no.6/16A two module socket , 1 no. 16A one module switch on suitable module surface mounting Box ( Plastic ) with module cover plate (plastic) on wall with connections. Higher End (SD 484)

Supply and run of 2of 1.5 sqmm (22/0.3) PVC insulated single core unsheathed copper conductor of 1100V grade in the existing PVC trunking box with connection (DATA 13)

Supply and run of 2 of 2.5 sqmm (36/0.3) and 1 of 1.5 sq.mm (22/0.3) PVC insulated single core unsheathed copper conductor of 1100V grade in the existing PVC trunking box with connection (DATA 14)

Supply and run of 2 of 4 sqmm (56/0.3) and 1 of 1.5 sq.mm ( 22 / 0.3) PVC insulated single core unsheathed copper conductor of 1100V grade in the existing PVC trunking box with connection (DATA 15)

Supply and run of 4x10 sqmm (140/0.3) and 1 of 1.5 sq.mm ( 22 / 0.3) PVC insulated single core unsheathed copper conductor of 1100V grade in the existing PVC trunking box with connection (DATA 16)

Supply and clamping of 2x16sqmm PVC LTUG armoured cable on post or on wall with MS clamps (SD 217)

Supply and fixing of brass cable gland for 2 x 16 sq.mm. PVC armoured LTUG cable with earth connection (SD !83 )

Supply and clamping of 3-1/2 x 35 sqmm PVC LTUG armoured cable on post or on wall with MS clamps (SD 223)

Supply and fixing of brass cable gland for 3-1/2 x 35 sq.mm. PVC armoured LTUG cable with earth connection (SD 187)

Supply and fixing of 65 mm (2.1/2") dia GI pipe (class B) of 6 mts length with 300mm x 300mmx 6mm base plate duly welded at the bottom with concreting with construction of masonary pedestal with necessary clamps to hold the LTUG Aluminium service cable with painting of suitable colour (DATA-17)

Suppy and fixing of 8"x6" PVC synthetic box for cable connection (DATA18)

Supply and fixng of TNEB meter board suitable for 3 phase 63A service connection made up of suitable angle iron frame work of size 2 feet x 1-1/2 feet using angle iron of size 1-1/2" x 1-1/2" x 1/4" rigidly fixed on wall covered with hylem sheet of size 2 feet x 1/2 feet of 6mm thickness with necessary bolts and nuts supports and supply and fixing of 3 Nos. 63A fuse units (500V), 1 No. neutral link, copper earth flat of size 1" x 1/4" with inter connection of EB meter to fuse units by 16 Sq.mm PVC insulated copper wire with earth connection complete

Supply and run of 1 of No 8 SWC copper conductor on suitable PVC rigid pipe on wall with painting of suitable colour for earth connection (DATA19)

Earthing as per the ISI specification with an earth electrode of 2.10 metre Class 'B' GI pipe of dia not less than 40mm with copper earth plate of size 125mm x 50mm x 6mm with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry (SD 233 )

GST Amount for providing Service to Government Contract Works for the above Construction & Maintenance Works. { GST Amount is the Total GST Amount for overall quoted amount (Both Construction and Maintenance) above this row in column "BB" for all works in this package} (Refer Clause 13.2 & 13.3 of Section 2 of Instruction to Bidders (ITB) of SBD)

P VIJAYA (BID ID -1240779)