REPAIR TO JOINERY FALSE CEILING WARDROBES ROOFING PLUMBING AND SANITARY WORKS ETC IN OTM AND MD ACCN AT LICHUBARI

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises complete all as directed.

Taking down cement plaster from brick or concrete surfaces of any description including racking out joints, hacking for key, scrubbing down with water etc complete all as directed.

Taking up or down steel tubing with connections of 15 mm bore pipe including cleaning for refixing or removal from site with all fittings complete all as specified and directed.

Taking up or down steel tubing with connections of 20 mm bore pipe including cleaning for refixing or removal from site with all fittings complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets, complete all as directed.

Taking down chowkats or frames ( without taking off shutters from the frame ) size exc. n.exc. 1.50 sqm each etc complete all as specified and directed.

Taking down chowkats or frames ( without taking off shutters from the frame ) size exc. 1.50 sqm but n.exc. 4 sqm each etc complete all as specified and directed.

Taking down shutters of any description n.exc 1 sqm size each etc complete all as specified and directed.

Taking down shutters of any description exc 1 sqm size but n.exc.2 sqm each etc complete all as specified and directed.

Dismantling PVC ( SWR) pipes of bore upto 110 mm with all fitting ,fixed at any position etc complete all as specified and directed.

Dismantling old decayed timber scantling 40 sqcm and over in section in any position in unframed work and removing from site etc complete all as directed.

Dismantling old decayed timber fillets , rails , posts,rafters, purlins, etc under 40 sqcm in section in any position in unframed work and removing from site etc complete all as directed.

Materials and Labour for, Non - Skid Ceramic tiles, coloured, 7 to 8 mm thick area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm,conforming to IS 15622, Grade B II, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including 15 mm thick screed bed or bedding layer of cement mortar (1:6),complete all as specified and directed.

Materials and Labour for,Non - skid Ceramic tiles, coloured, 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm,conforming to IS 15622, Grade B II, in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including 15 mm thick screed bed or bedding layer of cement mortar (1:6),complete all as specified and directed.

Materials and Labour for,Non - skid Ceramic tiles, coloured, 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm,conforming to IS 15622, Grade B II, on vertical surface of wall such as dados,skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including 10 mm thick screed bed or bedding layer of cement mortar (1:4),complete all as specified and directed.

Materials and Labour for,Glazed Ceramic coloured tiles, ,300 x 200 x 7 to 8 mm thick ,conforming to IS 15622, Grade B II, on vertical surface of wall such as dados,skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including 10 mm thick screed bed or bedding layer of cement mortar (1:4),complete all as specified and directed.

M&L for 2nd class hardwood Plain, solid, well seasoned , straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as directed.

S&F Pressed steel frames 105 mm x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, all as specified and as directed.

S&F Pressed steel frames 125 mm x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, all as specified and as directed.

S&F Flush shutters, 30 mm thick ,solid core construction, with particle board core and plywood face panels, commercial type on both sides etc complete all as specified and as directed.

S&F 2nd class hardwood 35 mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats etc complete all as specified and as directed.

S&F 2nd class hardwood 30 mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (with sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats etc complete all as specified and as directed.

M&L for Anodised aluminium Powder Coated (minimum thickness of powder coating 50 micron) frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified complete all as specified and directed.

S&F Anodised aluminium Powder Coated of any colour (minimum thickness of powder coating 50 micron) door shutters,aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing,handles 2 Nos in each door, hinges,anodised aluminum snap beading screws etc. complete all as specified and as directed.

S&F Anodised aluminium Powder Coated of any colour (minimum thickness of powder coating 50 micron) window and ventilator shutters, fixed / slide type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and as directed.

S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, guard bars of suitable square or round bars , dovetailed or welded complete all as specified and as directed.

S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified and as directed.

S&F Steel ventilators with centre hung shutter including two pairs of brass cup pivots, catch spring and pulley wheel, completecomplete all as specified and as directed.

Supply and Fix, solid PVC door frame of size 50 mm X 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, fixed in opening all as specified and directed.

Supply and Fix, factory made solid panel PVC door shutter 30 mm thick (Style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail and bottom rail: Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, fixed to door frame complete all as specified and directed.

M&L for 2nd class hardwood in scantling , clean saw and fixed etc complete all as specified and as directed.

M&L for 2nd class hardwood Plain fillets. square,rectangular or triangular in section, clean sawn, secured with nails or brads area exc. 6 sqcm but n.exc. 13 sqcm etc complete all as specified and as directed.

M&L for 2nd class hardwood Plain fillets. square,rectangular or triangular in section, clean sawn, secured with nails or brads area exc. 13 sqcm but n.exc. 25 sqcm etc complete all as specified and as directed.

S&F 4 mm tjhick asbestos cement plain building boards, fixed to timber framework with screws in ceiling etc complete all as specified and directed.

S&F aluminium anodised snap grid ( with T sec 24 x 38 x 0.70 mm , wall cleat 25 x 25 x 3.5 mm ) frame of size 605 mm x 605 mm with hangers 4 mm dia GI wire adjusting label fixed to roof truss by means of ceiling cleats made out of GI flats 40 x 3 mm size 60 mm long and expansion hold fastener 12.5 mm dia , 40 mm long including 4 mm tjhick asbestos cement plain building ceiling boards, fixed to grid with screws in ceiling etc complete all as specified and directed.

S&F steel tubing 15 mm dia medium grade galvanised , with all GI fittings fixed in wall, ceiling or laid under floor with necessary clamp or hook complete all as specified and as directed.

S&F steel tubing 20 mm dia medium grade galvanised , with all GI fittings fixed in wall, ceiling or laid under floor with necessary clamp or hook complete all as specified and as directed.

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and as directed.

S&F in repairs Bib cock, fancy type , cast copper alloy, chromium plated, with crutch or butterfly handle, screwed down, screwed for iron pipe or brass ferrule,15 mm bore and fixed, complete all as specified and directed.Make:- Jaquar cat part no CON 037KN or equivalent make in Marc / Kohler.

S&F in repairs 15 mm bore Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed.(Minimum weight 90gms) complete all as specified and directed.Make:- Prayag / Hindware / Parryware

S&F in repairs stop cock / angle cock, fancy type , cast copper alloy, chromium plated, with crutch or butterfly handle, screwed down, screwed for iron pipe or brass ferrule,15 mm bore and fixed, complete all as specified and directed.Make:- Jaquar cat part no CON 053KN or equivalent make in Marc / Kohler.

S&F in repairs 15 mm bore angle stop valve of PTMT any colour high pressure screwed for iron pipe and fixed.(Minimum weight 90gms) complete all as specified and directed.Make:- Prayag / Hindware / Parryware

S&F in repairs 15 mm bore Pillar tap of PTMT any colour high pressure screwed for iron pipe and fixed.(Minimum weight 110 gms) complete all as specified and directed.Make:- Prayag / Hindware / Parryware

S&F in repairs stop valve, fancy type , cast copper alloy, chromium plated, with crutch or butterfly handle, screwed down, screwed for iron pipe or brass ferrule,15 mm bore and fixed, complete all as specified and directed.Make:- Jaquar cat part no CON 083KN or equivalent make in Marc / Kohler.

S&F in repairs Plastic water closet seat and cover for pedestal pan, white / black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging devicecomplete all as specified and directed.Make:-Prayag / Hindware / Parryware.

S&F in repairs 32 mm dia waste pipe complete all as specified and directed.Make:-Prayag / Hindware / Parryware.

Supply and Fix in repairs, Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc.,complete all as specified and directed.

S&F Rotational moulded HDPE polyethylene 500 ltrs capacity water storage tanks three layered, (ISI marked) (cylindrical vertical with closed top) hoisted and fixed in position in SSR Part-I including ball valves 20mm dia high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball including 20mm dia GI medium grade over flow pipe, approx lenght 1.5 mtr, 25 mm dia wash out pipe with pluged at one end complete all as specified and directed.

S&F in repair 20 mm bore Ball brass valves, high pressure,with polythenefloat and flynut complete screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

Supply and Fix in repairs, Pillar taps, 15 mm bore , cast copper alloy, with capstan heads, fancy type,chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe, 15 mm bore,complete all as specified and directed.Make:- Jaquar cat part no CON 011KN or equivalent make in Marc / Kohler .

S&F in repairs, 32 mm dia , waste fittings, IS 2963 brass chromium plated for glazed ware sinks and wash basins etc with long shankl and fly nuts , flange end bedded in red lead cement ,complete all as specified and directed.

S&F in repair vitreous China wash down (EWC) water closet pan (pedestal pattern), white (excluding flushing cistern and flush pipe) but including plastic water closet seat cover closed pattern with flat bottom and cover with PVC hinge device, fixing bolt for pedestal pattern complete all as specfied and directed. Make:- Prayag / Hindware / Parryware

S&F in repair Vitreous china squatting pan of Orissa Pattern of size 580x 440 mm white with ‘P’ or ‘S’ trap , front or back inlet but excluding flushing cistern and flush pipe including placing in position in floor and embedded in cushion of PCC type E2 ( using 40 mm graded crushed stone aggregates), 1:5:10 and finishing the top surfaces to match with the existing flooring complete all as specified and as directed .Make:- Prayag / Parryware / Hindware.

S&F in repair PVC (Plastic polymer Cistern) valve less, Symphonic action type, flushing cistern of capacity 10 litres, low level, white with inlet, ball valve, manually operated with one PVC ball valve horizontal plunger type including provision of 32 mm PVC flush pipe of required length and making connections complete all as directed by Engineer-in-Charge .Make:- Parryware Cat part no C8110 or equivalent make in Prayag / Hindware.

S&F in repair Vitreous china wash hand basin, white, flat ball type , size 550 mm x 400 mm including bracket, cutting for and pinning the ends of brackets or erecting stands also including brass chromium plated waste coupling 32mm dia, PVC flexible waste pipe 40 / 32 mm dia of suitable length and PVC connection 15mm size 450mm length with PTMT nuts, complete all as specified and as directed .Make:- Prayag / Parryware / Hindware.

S&F in repair Brass Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union ,125 mm size complete all as specified and directed. Make:- Prayag / Parryware / Hindware.

S&F in repair PTMT shower roses with swivel joints, any colour, including fixing to steel pipe or union ,125 mm size complete all as specified and directed. Make:- Prayag / Parryware / Hindware.

S&F in repair sinks with drainage board made of stainless steel l mm thick kitchen or laboratory with plugs,washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm complete all as specified and directed. Make:- Prayag / Parryware / Hindware.

S&F in repair 15 mm PVC connection pipe with PTMT nut of length 450 mm complete all as specified and directed. Make:- Prayag / Parryware / Hindware.

S&F in repair 15 mm PVC connection pipe with PTMT nut of length 600 mm complete all as specified and directed. Make:- Prayag / Parryware / Hindware.

S&F in repair MS Chromium plated soap dish complete all as directed by Engineer-in-Charge .Make:- Prayag / Hindware / Parryware

S&F in repair tubular towel rail , brass chromium plated 20 mm dia 60 cm long between flanges etc complete all as specified and directed.Make:- Prayag Cat part no BA-30 or equivalent make in Hindware / Parryware.

S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long etc complete all as specified and directed.Make:- Prayag /Hindware / Parryware.

S&F in repair 15 mm Brass CP fancy centre hole basin mixer for mixing hot & cold water screwed down for iron pipe and fixed etc complete all as specified and directed.Make:- Jaquar Cat part No QQT-7169B or equivalent make in Kohler / Cera / Marc.

S&F in repair 15 mm Brass CP fancy wall mixer with L bend ( incl provn of over head shower & hand shower ) for mixing hot & cold water screwed down for iron pipe and fixed etc complete all as specified and directed.Make:- Wall mixer , Jaquar Cat part No QQT-7281 and hand shower Cat part No HSH-1717 with tube or equivalent make in Kohler / Cera / Marc.

S&F in repair Vitreous China Urinal, Half stall type,white (excluding flushing cistern) , flush pipe and waste pipe, providing and fixing plugs , bedding urinal against wall in cement sand mortar 1:2 , securing urinal to plugs with and including 60 mm long brass screws , magnum urinal spreader pointing around urinal back in cement etc complete all as specified and directed.Make:- Prayag / Hindware / Parryware.

S&F in repair 75 mm bore PVC (SWR) floor trap plain with CP grating setting and jointing with solvent cement etc complete all as specified and directed.

S&F in repair 75 mm bore PVC (SWR) multi floor trap plain with CP grating setting and jointing with solvent cement etc complete all as specified and directed.

S & F in repair 125/110 mm bore PVC (SWR) gully trap setting and jointing with solvent cement etc complete all as specified and directed.

S&F 110 mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joint laid in trenches , floor / wall including taking down old unserviceable one with all fittings etc complete all as specified and directed.

S&F 75 mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joint laid in trenches , floor / wall including taking down old unserviceable one with all fittings etc complete all as specified and directed.

S & F 110 mm bore PVC (SWR) bend with access door any radius complete all as specified and directed.

S & F 75 mm bore PVC (SWR) bend with access door any radius complete all as specified and directed.

S&F 50 mm bore Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe etc complete all as specified and directed.

S&F MS butt hinges medium weight cold rolled100 mm , complete all as specified and directed.

S&F MS butt hinges medium weight cold rolled 75 mm , complete all as specified and directed.

S&F MS butt hinges medium weight cold rolled 50 mm , complete all as specified and directed.

S&F Aluminium anodised barrel tower bolt, extruded type, 200 mm long, complete all as specified and directed.

S&F Aluminium anodised barrel tower bolt, extruded type, 150 mm long, complete all as specified and directed.

S&F Aluminium anodised handle, fabricated type, 150 mm long, complete all as specified and directed.

S&F Aluminium anodised handle, fabricated type, 100 mm long, complete all as specified and directed.

S&F Aluminium alloy, 300 mm long , anodised,sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples etc complete all as specified and as directed.

S&F in repair Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples etc complete all as specified and as directed.

S&F in repairs 300 mm , MS ordinary rat tail rod pattern springs including roller and roller plate etc complete all as specified and as directed.

M&L for MS works such as Bands, straps chains; hand made sliding bolts; clamps; hold fasts; wall ties; and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed. Note:- Holdfast shall be treated with 2 coats of coal tar and cost of the same shall be included in the quoted rate against ibid item.

S&F 3 mm thick sheet glass ordinary type and glazing with oil putty in squares n.exceeding 0.5 sqm in each pane etc complete all as specified and as directed.

S&F 3 mm thick sheet glass frosted type and glazing with oil putty in squares n. exceeding 0.5 sqm in each pane etc complete all as specified and as directed.

S&F in repair 5.5 mm thick sheet glass ordinary type and glazing with oil putty in squares exceeding 0.5 sqm in each pane etc complete all as specified and as directed.

M&L for rendering 15 mm thick, cement plaster, in cement sand mortar (1:6),finished plaster surface even and smooth without using extra cement etc complete all as specified and directed.

M&L for rendering 5 mm thick, cement plaster, in cement sand mortar (1:3) on ceiling ,finished plaster surface even and smooth without using extra cement etc complete all as specified and directed.

M&L for Rendering 5 mm thick cement plaster in cement sand mortar 1:4 on brick / concrete surfaces finished even and fair without using extra cement mixed with water proofing compound at the rate of 3 % by the weight of cement used or as per manufacturer's instruction over and including 10 mm thick cement plaster in cement sand mortar 1:4 etc complete all as specified and as directed by Engr in Charge. Note:- WPC compound shall be measured and paid seperately.

Supply only liquid water proofing compound ISI marked etc complete all as specified and as directed.

M&L for preparation of new or previously untreated surfaces of wall and applying two coats of Acrylic emulsion distemper interior type over and including a coat of suitable wall primer over and including 1 mm thick wall care putty chalk whitening etc complete all as specified and as directed by Engr in Charge.

M&L for preparation of new or previously untreated surfaces of ceiling and applying two coats of Acrylic emulsion distemper interior type over and including a coat of suitable wall primer etc complete all as specified and as directed by Engr in Charge.

M&L for preparation of new or previously untreated surfaces of wall and applying two coats of 100 % Acrylic exterior emulsion base premium quality matt finishn paint (weather coat 1st quality ) over and including a coat of anti fungal exterior type wall primer etc complete all as specified and as directed by Engr in Charge.

M&L for preparation of new or previously untreated surfaces of wood and applying two coats of synthetic enamel paint over and including a coat of Pink primer , surface exceeding 10 cm in width or girth including necessary preparation of surfaces complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint over a coat of pink primer on new or previously untreated wooden surface not exceeding 10 cm in width or girth including necessary preparation of surfaces complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint over a coat of red oxide primer on new steel or iron surface exceeding 10 cm in width or girth including necessary preparation of surfaces complete all as specified and directed.

S&F in repair 3 mm thick sheet glass ordinary type and glazing with oil putty or in squares n.exceeding 0.5 sqm in each pane , fixed with wooden beads etc complete all as specified and as directed.

S&F in repair 3 mm thick sheet glass frosted type and glazing with oil putty or in squares n.exceeding 0.5 sqm in each pane , fixed with wooden beads etc complete all as specified and as directed.

S&F in repair Mild steel 300 mm long , sMild steel sliding door bolts,plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed.

S&Fin repair Aluminium anodised barrel tower bolt, extruded type, 150 mm long, complete all as specified and directed.

S&F in repair Aluminium anodised barrel tower bolt, extruded type, 100 mm long, complete all as specified and directed.

S&F in repair Aluminium anodised handle, cast type, 150 mm long, complete all as specified and directed.

S&F in repair Aluminium anodised handle, cast type, 100 mm long, complete all as specified and directed.

S&F in repair steel chromium plated hand shower ( health faucet ) 2 in 1 with 1.5 meter tube and hook etc complete all as specified and directed.Make:- Prayag cat part no 452 or equivalent make in Hindware / Parryware.

Taking down existing roof treatment including scrapping with wire brush to remove plaster PCC beddings and cleaning with water and making the surface dry ,to approachable / non approachable RCC roof as per following activities etc complete all as specified and as directed by Engr in Charge. i) Preparation of RCC roof surfaces and providing 15 mm thick cement plaster in cement sand mortar 1:4 mixed with approved water proofing compound @ 3% of the weight of cement used or as per manufacturer's instruction. ii) Supply and applying bituminous based primer conforming to IS-3384 @ 0.40 KG / SQM over plastered surfaces. iii). Supply and applying one coat of hot air blown bitumen of grade 85 / 25 at the rate of 1.20 KG / SQM. iv). M&L for APP (Atactic Polypropylene modified polymeric membrane) based polymeric membrane minimum weighing 3kg/sqm consisting of centre core of 100 micron HM HDPE fprocessed on both sides with a high quality polymeric asphaltic mix with further protected thermofusible HM HDPE film and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application with a overlap of 100 mm on both sides complete all as specified. v) Supply and applying one coat of hot air blown bitumen of grade 85 / 25 at the rate of 1.20 KG / SQM. vi) Supply and applying one coat of heat resistant aluminium paint at the rate of 0.80 KG / SQM.

M&L for Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 etc complete all as specified and as directed.

Dismantling Plain or corrugated AC sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings etc complete all as specified and as directed.

S&F Pre-painted, galvalume aluminium zinc coating GI based corrugated steel sheet, 0.50 mm thick of any colour, having tensile strength of 550 Mpa, as in roof covering/cladding to wall, fixed with self-tapping screws,complete all as specified and directed.

S&F Pre-painted, galvalume aluminium zinc coating GI based plain steel sheet, 0.50 mm thick of any colour, having tensile strength of 550 Mpa, as in roof covering /cladding to wall / eaves and similar nature of work , fixed with self-tapping screws,complete all as specified and directed.

Demolition of brick masonry built in cement sand mortar etc complete all as specified and as directed.

M&L for Brick work with sub class‘B’ bricks,old size ,well kiln burnt , straight or curved on plan exc 6m mean radius, built in cement sand mortar 1:6 etc complete all as specified and as directed.

M&L for Brick work with sub class‘B’ half bricks,old size ,well kiln burnt , straight or curved on plan to any radius, built in cement sand mortar 1:4 etc complete all as specified and as directed.

Demolition of cement concrete ( unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) and removing debris to a distance n.exc. 50 m etc complete all as specified and as directed.

M&L for 75 mm thick plain cement concrete (1:4:8) type D-2 (using 40 mm graded stone aggregates) as in sub base including necessary formwork complete all as specified and as directed.

M&L for 55 mm thick plain cement concrete (1:2:4) type B-1 (using 20 mm graded stone aggregates) as in floor / path / pavings finished fair and even and spike rolling to surfacces or making impression of expanded metal, whilst the concrete is green including necessary formwork complete all as specified and as directed.

M&L for 75 mm thick plain cement concrete (1:3:6) type C-2 (using 40 mm graded stone aggregates) as in plinth protection, finishing surface even and fair without using extra cement including necessary formwork complete all as specified and as directed.

M&L for pre-polished Chequered cement concrete tiles 20cm x 20cm x 25 mm thick,set, jointed and pointed in neat cement slurry with grey cement and pigments over and including 20 mm thick screed bed in cement sand mortar 1:4 in floors etc complete all as specified and as directed.

M&L for sand filling under floors or in foundations including watering and consolidation etc complete all as specified and as directed.

M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigments etc complete all as specified and as directed.

S&F in repairs 18 / 19 mm thick block boards, grade 2 quality,interior grade, commercial type, fixed with screws to shelves and cup board shutter etc complete all as specified and as directed.

M/S RK SAHA AND CO