PROVN OF KLP FOR GE (NORTH) AT DELHI CANTT-10

Amount

Total amount of Schedule 'A' Section-I (Constructionof Office Building and Garage) (Ref pre priced Schedule attached seperately)

Total amount of Schedule 'A' Section-II (Demolition & Dismantling) (Ref pre priced Schedule attached seperately)

Total amount of Schedule 'A' Section-III (Excavation & Earthwork) (Ref pre priced Schedule attached seperately)

Total amount of Schedule 'A' Section-IV (Internal Electric Supply) (Ref pre priced Schedule attached seperately)

Total amount of Schedule 'A' Section-V (Internal Water Supply) (Ref pre priced Schedule attached seperately)

Total amount of Schedule 'A' Section-VI (External Electric Supply) (Ref pre priced Schedule attached seperately)

Total amount of Schedule 'A' Section-VII (External Water Supply) (Ref pre priced Schedule attached seperately)

Total amount of Schedule 'A' Section-VIII (Road, Path & Culvert) (Ref pre priced Schedule attached seperately)

Total amount of Schedule 'A' Section-IX (Sewage Disposal) (Ref pre priced Schedule attached seperately)

Total amount of Schedule 'A' Section-X (Area Drainage) (Ref pre priced Schedule attached seperately)

Total amount of Schedule 'A' Section-XI (Compound Wall, Gate & Fencing) (Ref pre priced Schedule attached seperately)

Total amount of Schedule 'A' Section-XII (Summer Appliance) (Ref pre priced Schedule attached seperately)

Description of Work / Item(s)

Amount

INTERNAL ELECTRIC SUPPLY

S&F ventilating fan, wall mounted type, 230mm dia, 240 Volt, AC, 50 Hz, cutting of hole in wall, making wooden frame, all arrangement for mounting of fan incl making good of disturbed surface complete all as specified and directed.

S&F wall fan, 400 mm sweep, 230/240 Volt, single phase, 50 watt, 1320 rpm, air delivery 70 CMM, oscillating type, 3 speed push button control, to be fitted on wall with necessary arrangements incl connection complete all as specified and directed.

S&F on surface and wall mounted LED batten with polycarbonate housing and initigarated electronic drive 20 Watt fixture 4 feet, 5700 K, provided for efficient heat dissipation with policorbonate diffuser and integrated electronic driver and all accessories pre-wired including connection complete all as specified and directed.

S&F surface and wall mounted LED batten 10 watt 2 feet long extruded aluminium housing provided for efficient heat dessipation with polycarbonate diffusser and integrated electronic drive suitable for mirror fittings, pre-wired including connection complete all as specified and directed.

EXTERNAL ELECTRIC SUPPLY

M&L for LED street light fittings 70 watt, made up of of pressure die cast aluminium housing with toughned glass and high power LED as lighting source and lens embedded PC cover having top opening seperate driver compartment with IP 66 protection incl GI bracket with clamps, nut bolt etc of suitable size & length to mount light fitting on pole and connecting the street light fitting using 1.5 Sqmm PVC insulated copper cable complete all as specified and directed.

S&F of street light pole junction box of size 200mm x 160mm x 98mm, made of high quality thermosetting plastic polyesterene, dust and jet water proof, chemical / acid corrosion resistantr impact and shock proof IP 65 with internally imbedded gasket (PUR) including 1 No SP MCB 6 Amps alongwith door arrangement and pre-moulded knock out all the sides including back of the base. The box must be fitted with 10 Sqmm stud type terminal 04 Nos including Elmex stud type TB 04 Nos (Make Hensal or equivalent) incl connection using cable lugs / glands complete all as specified & directed (Note : Cost of incoming & outgoing cable lugs & glands of suitable size deemed to be included in the quoted rate)

Supply, installation, testing and commissioning of factory made and tested LT feeder pillar box, outdoor type, plateform mounted suitable for 415 volts, 3 phase, 4 wire, 50 Hz, AC supply system having bus bar chamber with insulated aluminium bus bar 250 Amps rating installed on porcelain insulators. The panel shall be dust and virmin proof IP 65 class protection and made of 3.15mm CRCA MS sheet and 40x40x6 mm thick angle iron frame work, powder coated finish over one coat of red oxide primer outside and two coats of red oxide primer inside, front opening type with provisions for cable entry with double door shutter and locking arrangement including provision of 65mm godrej freedom lock with 2 keys, internal wiring with PVC insulated solid copper conductor FRLS cable of adequate size but not less than 4 Sqmm. Panel shall be effectively PVC gasketed and sealed, glands to be provided at cable entries, powder coated painting and sign writing for in/out going connections, grouting of panel including PCC work complete all as specified & directed and comprising of following as under :-

S&F LED Post top lantern luminaire, 35 watt, energy saving, enviorinmental friendly, long life aesthetically designed with symmetrical light distribution, spun aluminium landscape luminaire with high power LED as light source incl all accessoriesand and fixing arrangement at gate with GI pipe and civil work as required incl connection with cable of suitable size complete all as specified and directed.

EXTERNAL WATER SUPPLY

M&L for extension of existing CI/MS header of pump house of any dia bore / size in position for insertion of 01 No of CI Tee of required size and bore connecting pieces / flanged / socketed / spigoted of suitable bore and making run lead / flanged joint complete all as specified and directed.

M&L for construction of brick masonary valve pit chamber of size 900mm x 900mm x 900mm (internal dimension) including necessary excavation and earthwork, PCC, brick work, 12 mm thick rendering in cement mortar 1:4 on internal surface of valve pit and mild steel sheet cover 3mm thick and mild steel angle iorn frame size 40 x 40 x 5 mm around of valve pit, locking arrangement with pad lock of size 50 mm brass, 6 leavers and key complete including two coat of synthetic enamel over a coat red oxide primer on steel surface with preparation of surface complete all as specified and directed.

M&L for Boring holes under road pavement by bocky manually, in any type of soil upto 80 mm bore complete all as specified and directed.

AREA DRAINAGE

S&F Factory made steel fibre reinforcement concrete (SFRC) cover of medium duty 70-75mm thick with perforated holes 50mm dia and set in CM 1:6 complete all as specified and directed.

SUMMER APPLIANCES

S&F voltage stabilizer for automatic operation, single phase naturally air cooled, indoor wall mounted type, fully elecronic controlled & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5 % and of capacity 2.0 KVA complete all as specified and directed.

S&F desert cooler of steel body size 25"x25"x32", made out of corrosion resistant ,18 SWG GI sheet duly powder coated paint with 500 mm sweep copper wound fan motor kit of not less than 180 watt with metallic blade, ISI marked, 1400 RPM, 230 volt, AC, having nominal air flow capacity 4000 CUM per hour (or nearest size), water tank capacity not less than 100 ltr, incl plastic submersible pumps, electronic fan regulator with Piano type switch, cooler stand of suitable size as directed, and desert cooler to be fitted at existing window with 6 mm thick plywood of required size at site to cover the gapof window complete all as specified and directed.

Shri Balaji Construction

imran construction company

MINHAS CONSTRUCTIONS

G and G Infratech Private Limited

M/s KUMAR BUILDERS

Shri Balaji Construction

imran construction company

V M CONSTRUCTION

M/s KUMAR BUILDERS

G and G Infratech Private Limited