Replacement of Existing Iron Main Gate and Provision of Sign Board for Road at INS Gomantak and Provision of Shed for Drying of Diving Equipment and Suit infront of AC Store in CDU Goa under GE Gomantak

Amount

M&L for Surface excavation n.exc(not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft disintegrated rock

M&L Surface excavation in soft/loose soil n.exc 30cm deep and averaging 15cm deep and getting out

M&L for Excavating in post holes (orsimilar holes) each n exc 0.5cu. m, getting out, returning,filling in and ramming earthor broken rubble mixed withearth around, in layers not exceeding 25 cm in soft disintegrated rock

M&L Hardcore broken stone or boulders of gauge exc. 63 mm but n exc 100mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to true surface

M&L 100mm thick PCC type D-2, (1:4:8) using 40mm graded stone aggregate as in sub base all as specified and directed by Engr in charge.

M & L chequered cement concrete tiles 20cm x 20cm x 25mm thick, with grey cement and pigment set, jointed and pointed in neat cement slurry in floors over 20mm screed bed in CM ( 1 : 4)

M&L for cement concrete type C2(1:3:6) 40mm graded stone aggreagte in foundations,filling and mass concrete

M&L for Cement concrete (1:4:8) type D2 as in foundations, filling and mass concrete all as specified and as directed.

S&F stainless steel road sign board made up of 3mm thick ACP board with night glow radium letters(an average of 30letters per board) including logo&stainless steel frame of size 4mmX4mm and 2Nos of stainless steel pole with 50mm dia for fixing the board of size 1.50mX1.50m all as specified and directed by Engineer in charge

Removing excavated materials (soft/disintegrated rock) to a distance n.exc 50m and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and directed

Removing excavated materials (soft/loose soil) to a distance n.exc 50m and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and directed

Returning, filling in , including, spreading, levelling, watering and well ramming in layers not exc 25cm thick soft/disintegrated rock complete all as specified and directed

Sand cushning 50 mm thick spread, levelled, compacted to receive interlocking tiles all as specified and directed

M&L for Cement concrete type B- 1, 1:2:4 (20mm graded aggregate) for coping or chamfered on edges .

M&L for Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade with grey cement and pigment.

M&L for Pre-cast cement concrete type C1 (1:3;6) block masonry with solid blocks, exc. 10 cm in width and setting in mortar (1:4) complete all as specified and as directed.

M & L 15 mm thick rendering on fair faces of concrete in CM 1:6 finish the surface even & smooth without using extra cement complete all as specified and directed

M & L 15 mm thick rendering on fair faces of concrete in CM 1:4 finish the surface even & smooth without using extra cement complete all as specified and directed

Applying three coats of white wash on new wall surface including preparation of surface.

S&F Rolled mild steel Roof trusses (framed), trussed purlins crane gantries, rails & fastenings & heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc. GDE Fe410-0 or Fe 310-O

M&L for applying two coats of synthetic enamel paint on steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of new surface & applying one coat of red oxide, zinc chrome primer.

Dismantling of Plain or corrugated steel sheeting , any gauge, thickness, including Nainital or similar pattern roof coverings etc. complete all as specified and directed.

Supply and fixing Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

S&F mild steel work in tubular pipes including special shaped washer etc complete using ERW or induction butt welded tubes complete all as specified and directed.

Demolition of RCC of any description and in any position not otherwise specifically provided for and disposal of the waste material exc. 1.50 km but n exc. 10 km and depositing where directed

M&L for Excavating in trenches, n exc1.5 m wide and n exc 1.5 m indepth; for foundation, etc. orfor shafts, wells, cesspits,manholes, pier holes, etc. nexc 10 sq m on plan and n exc1.5 m in depth and getting out in soft disintegrated rocks

M&L for RCC M20 nominal mix(using 20mm graded aggregate) for Foundations, including rafts, footings, foundationbeams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete

M&L for RCC M20(using 20mm graded aggregate) for Columns, pillars, piers,posts and struts

M&L for providing TMT bars 10 mm dia and over, cut to length, bent to shape required incl cranking, bending, sprilly for hooping for columns hooking ends and binding with and including mild steel wire(annealed) not less than 0.9mm dia or securing with clips complete all as specfied

Providing TMT bars 5 mm dia and over up to and including 10mm in stirrups ,spacers &binders, cut to length, bent to shape required incl cranking, bending, spirally for hooping for columns etchooking ends and binding with and including mild steel wire (annealed) not lessthan 0.9mm dia or securing with clips complete all as specfied

M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams,sides and soffits (if any) of foundation and plinth beams;and similar work; vertical or to batter

M&L for Formwork to sides of pillars,posts, struts, piers, columns and stanchions for rough finished flat concrete surface

M & L 10 mm thick rendering in CM 1:3 as backing coat to receive granite/marble stone as in cills and similar works.

M & L Granite (of any type) 20mm work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed .

Dismantling structural steel work including doors,gates but excluding framed truss ets

S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete Fe 290 Gde- E-165)

S&F Stainless steel framed work for fixing fibre translucent boards all as specified and as directed

Demolition of Brickwork or stone/boulder masonry, built in lime mortar including all quoins, arches, pillars,etc, but excluding ashlar facings, dressed stonework and precast concrete articles.

M&L applying two coats of synthetic enamel paint on newly plastered surfaces of of wall including preparation of new surface

Dismantling Stone slabs in roofs, suspended floors, chajjas, landings, etc., any thickness, jointed in any mortar and rubbish off the premises complete all as specified.

Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level)

AATREYA CONSTRUCTION

SHIVANI ENTERPRISES

M/S G.N.POWAR

M/s J.D. DESAI

Tara Construction

M/s Ekta Engineering Works

M/S. M M S ENTERPRISES

M/s Gayatri Contruction Co.