Rough cost estimate of S/R ...

Amount

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. (HSR 5.45)

Removal of old broken glass panes (any thickness or size, quality or description) from wooden frames, glazed with putty or fixed with beads. (HSR 5.50)

Repair to plaster of thickness 12mm to 20 mm in patches of area 2.5 sqm and under, including cutting the patch in proper shape, raking out joints and preparing plastering the wall surface with white cement based polymer modified self curing mortar, including disposal of rubbish, all complete as per the direction of Engineer-In-Charge. (HSR 30.17)

Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. (HSR 11.59)

Finishing walls with textured exterior paint of required shade New work (Two or more coats applied @ 3.28 litre/1 O sqm) over. (HSR 11.94.1)

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including ISi marked Stainless Steel butt hinges with necessary screws. (HSR 12.36.1)

Extra for Providing and fixing flush doors with decorative veneering instead of non decorative ISI marked flush door shutters conforming to IS: 2202 (Part I). (HSR 12.38)

Providing and fixing wire gauge shutters using stainless steel grade 304 wire gauge with wire of dia 0.5 mm and average width of aperture 1.4 mm in both directions for doors, windows and clerestory windows with necessary screw. 30 mm thick shutter. Second class teak wood. (HSR 12.32.2.2.1)

Providing and fixing 25 mm thick shutters for cup board etc. Second class teak wood including ISI marked anodised aluminium butt hinges with necessary screws. (HSR 12.25.1.1)

Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete : (HSR 12.69)

125 mm. (HSR 12.69.1)

100 mm. (HSR 12.69.2)

French spirit polishing : One or more coats on old work. (HSR 30.32.1)

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end). (HSR 22.98) 20mm dia

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe. 40mm dia. (HSR 22.14.2.2)

Providing and fixing kitchen sink including making all connections excluding cost of fittings. Providing and fixing kitchen sink including making all connections excluding cost of fittings. (HSR 22.13.1)

Providing and fixing toilet paper holder: C.P. brass. (HSR 22.42.1)

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White vitreous chinaware Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests (HSR 22.22.1)

Providing and fixing white vitreous chinaware pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous chinaware flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISi marked white solid plastic seat and lid (HSR 22.24.1)

Providing and fixing controlled flush, low level cistern made of vitreous chinaware with all fittings complete. 10 litre (full flush) capacity-white (HSR 22.40.1)

Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete: White solid plastic seat with i/d. (HSR 22.36.1)

Providing and fixing in position vitreous chinaware white lavatory suites of approved make (to the approval of Engineer-in-charge) including Rack Bolt Screw Pair 115mm long without CP fittings complete in all respect. Size 550 mm x 400 mm x 815 mm. (HSR 22.221.2)

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. (HSR 22.106)

Bib cock long body

Bib cock

Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. (HSR 22.105) i) Stop cock male and female end. (HSR 22.105.1)

Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet: 150 mm diameter. (HSR 22.102.2)

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Oval shape 450x350 mm (outer dimensions). (HSR 22.210.3)

Providing and fixing rectangular high density polyethylene water storage loft tank with cover, conforming to ISI : 12701, colour of opaque white or as approved by Engineer-in-charge. The rate includes making necessary holes for inlet, outlet & over flow pipes. The base support i/c fittings & fixtures for tank shall be paid separately. (HSR 22.182)

MTZ Associates