REPAIR TO AREA DRAINAGE, STORM DRAIN, PCC WORKS AND CERTAIN RELATED WORKS OF AREA-III UNDER AGE (B/R) CENTRAL AT GE (W) COLABA MUMBAI

Amount

Demolition of brick work or stone masonry built in cement mortar including all quoins, arches, pillars etc and including removing debris/rubbish materials off the site out side MoD land, complete all as specified and directed.

M&L for cleaning of drains/culverts including removing & re-covering of RCC/CI/Steel covers by completely removing silt, soil, mud sludge, vegetation growth etc. and removing the same to out side MoD land all as directed by Engr-in-Charge for any width of drains and depth of drains n exc. 0.90m, complete all as specified and directed.

Demolition of RCC of any description and in any position not otherwise specifically provided for incl reinforcement cut as required to facilitate demolition and separating scrap and cleaning of reinforcement and including removing debris/rubbish materials off the site out side MoD land, complete all as specified and directed.

Demolition of cement concrete of any description and in any position not otherwise speially provided for such as bottom and sides of drain etc including removing debris/rubbish materials off the site out side MoD land, complete all as specified and directed.

Taking down cement plaster on brick or stone walls etc incl raking out joints, hacking for key scrubbing down with water etc and including removing debris/rubbish materials off the site out side MoD land, complete all as specified and directed.

M & L for PCC 1:2:4 type B-0 (using 12.50 mm graded stone aggregate) as in coping, bed concrete and all other similar work incluidng necessary formwork, complete all as specified and directed by Engineer- In-Charge.

Material & Labour for brick work with sub class 'B' bricks straight or curved on plan exc 6 m mean radius built in CM (1:6), complete all as specified and directed.

M & L for Pre-cast cement concrete block masonry with solid blocks type C-1 (1:3:6) (20 mm graded aggregate) exc. 10 cm in width and setting in mortar (1:6), complete all as specified and directed by Engineer- In-Charge.

M&L for 1:3:6 type C-2 (using 40mm graded stone aggregate) as in surface channel and drains and like etc, including necessary formwork, complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided including removing debris/rubbish materials off the site out side MoD land, complete all as specified and directed.

S & F mild steel work such as grill, gratings etc with the ends of bars shoulder and/ or riveted or formed into spikes framed guard bars, barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work, rail & similar fixing with bolts where required conforming to grade E165 as per IS 15911: 2010, complete all as specified and as directed.

M&L for preparation of new untreated steel surface of any description exc 10cm width or girth applying two coats of black Japan paint over a coat of red oxide primer, complete all as specified and as directed.

Material and labour for rendering 15 mm thick on fair faces of brick wall or stone surfaces in cement mortar 1:4 finished even and smooth without using extra cement, complete all as specified and directed.

M&L Two coats of synthetic enamel paint over a coat of plaster priming surfaces including preparation new of surfaces, complete all as specified and directed .

S&F Factory made precast RCC drain cover of size 900 mm x 600 mm x 75 mm thick and fixed to drain in CM (1:4), complete all as specified and directed.

Demolition and breaking up drain pipes (SGSW, AC or RCC, CI, PVC) of internal dia 75/110 mm, set in cement mortar, complete all as specified and directed.

S&F 110mm dia PVC (SWR) pipes double socketed in any length with rubber ring fixed to wall and jointed with solvent cement, complete all as specified and directed by Engr In Charge.

S&F 110mm dia PVC (SWR) bends, complete all as specified and directed by Engr In Charge.

M& L for Reinforced concrete pipes, class NP3, 150 mm, laid and jointed with binding material complete with collars, complete all as specified and directed by Engr In Charge.

M& L for Reinforced concrete pipes, class NP3, 300 mm, laid and jointed with binding material complete with collars, complete all as specified and directed by Engr In Charge.

M& L for Reinforced concrete pipes, class NP3, 600 mm, laid and jointed with binding material complete with collars, complete all as specified and directed by Engr In Charge.

M & L Machine pressed precast concrete interlocking paver block glossy finish any shape and size confirming to IS 15658 - 2006 of 80 mm thickness, M- 40 grade with grey cement and pigment including 40 mm thick sand cushioning layer, complete all as directed and specified.

M & L Machine pressed precast concrete interlocking paver block glossy finish any shape and size confirming to IS 15658 - 2006 of 60 mm thickness, M- 35 grade with grey cement and pigment including 40 mm thick sand cushioning layer, complete all as directed and specified

M & L Hardcore of guage exc 63mm but n.exc. 100 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface, complete all as specified and directed.

M&L for 75mm thick plain cement concrete 1:3:6 type C-2 (using 40mm graded aggregate ) as in plinth protection and similar work including necessary expansion joint filling with bitumen at a certain distance, complete all as specified and directed.

M&L PCC 1:2:4 type B-1 using 20mm graded aggregate as in benching/ coping and sub base set in CM 1:6, complete all as specified and directed.

M&L for 75mm thick plain cement concrete 1:4:8 type D-2 (using 40mm graded aggregate ) as in sub base and similar work including necessary expansion joint filling with bitumen at a certain distance, complete all as specified and directed.

M&L Preparing old painted brick or concrete surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of floor coat emulsion paint complete all as specified and directed.

SAHU AND SAHU CO. (BID ID -3321078)

Bright Construction Co (BID ID -3321045)

SHRI SAI ENTERPRISES (BID ID -3316704)

SAHI SAGAR ENTERPRISES (BID ID -3320360)

SHRIKALP ENGINEERS AND CONTRACTORS (BID ID -3320575)

vikas construction & co (BID ID -3320029)

Nilesh Construction (BID ID -3320446)

ASHOK CONSTRUCTION (BID ID -3321400)

Unitech Enterprises (BID ID -3319495)

Panther Facilities (BID ID -3319928)

SHIV ENTERPRISE (BID ID -3320617)

R.R.Construction.Co (BID ID -3321151)