Loading
Loading…
Loading…
Tender Value
₹6.4 Cr
EMD Value
₹12.7 L
Closing Date
21 Apr 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
JMP/CON
14 conditions · 2 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.[FOR COMPLETE DETAILS OF THE FINANCIAL ELIGIBILITY CRETIRIA FOR CONTRACT AMOUNT RECEIVED, PLEASE REFER CLAUSE 10.2 CHAPTER -II OF THE TENDER DOCUMENT]
Submit the scanned copy (In PDF form) of the documents for evaluating the Bid capacity(Please refer clause 10.3 & 17.15.3 of chapter-II of the Tender document)This is applicable in all works contract having tender value of Rs. 20.00 Crore and above. TENDERS NOT ACCOMPANIED BY THESE DOCUMENTS WILL BE SUMMARILY REJECTED.
(a)The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i)Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii)Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii)One similar work costing not less than the amount equal to 60% of advertised value of the tender. (b)(1)In case of tenders for composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works,OHE works etc. and in the case of major bridges-substructure, superstructure etc.), tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven)years, ending last day of month previous to the one in which tender is invited: (i)Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or (ii)Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or(iii)One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender. Note for b(1): Separate completed works of minimum required values shall also be considered for fulfillment of technical eligibility criteria for different components. (b)(2)In such cases, what constitutes a component in a composite work shall be clearly pre-defined with estimated tender cost of it, as part of the tender documents without any ambiguity. (b) (3) To evaluate the technical eligibility of tenderer, only components of work as stipulated in tender documents for evaluation of technical eligibility, shall be considered. The scope of work covered in other remaining components shall be either executed by tenderer himself if he has work experience as mentioned in clause 7 of the Standard General Conditions of Contractor through subcontractor fulfilling the requirements as per clause 7 of the Standard General Conditions of Contract or jointly i.e., partly himself and remaining through subcontractor, with prior approval of Chief Engineer in writing. However, if required in tender documents by way of Special Conditions, a formal agreement duly notarised,legally enforceable in the court of law, shall be executed by the main contractor with the subcontractor for the component(s) of work proposed to be executed by the subcontractor(s), and shall be submitted along with the offer for considering subletting of that scope of work towards fulfillment of technical eligibility. Such subcontractor must fulfill technical eligibility criteria as follows: The subcontractor shall have successfully completed at least one work similar to work proposed for subcontract, costing not less than 35% value of work to be subletted, in last 5 years, ending last day of month previous to the one in which tender is invited through a works contract. Note: for subletting of work costing up to Rs 50 lakh, no previous work experience of subcontractor shall be asked for by the Railway. SIMILAR NATURE OF WORK FOR THIS TENDER AS DEFINED UNDER CLAUSE 10.1 OF TENDER FORM (SECOND SHEET) OF ANNEXURE-I OF CHAPTER-II OF TENDER DOCUMENT.
36 conditions · 4 needing a document upload
The Bid Security shall be deposited either in cash through e payment gateway or submitted as Bank Guarantee bond from a scheduled commercial bank of India or as mentioned in tender documents. The Bank Guarantee bond shall be as per Annexure- VIA and shall be valid for a period of 90days beyond the bid validity period. (3)In case, submission of Bid Security in the form of Bank Guarantee, following shall be ensured: i. A scanned copy of the Bank Guarantee shall be uploaded on e-Procurement Portal (IREPS) while applying to the tender. ii. The original Bank Guarantee should be delivered in person to the official nominated as indicated in the tender document before closing date for submission of bids (i.e. excluding the last date of submission of bids). iii. Non submission of scanned copy of Bank Guarantee with the bid on e-tendering portal (IREPS) and/or non submission of original Bank Guarantee within the specified period shall lead to summary rejection of bid. Other stipulations of Clause 5 of Chapter-II of Tender document shall be followed.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
All documents in support of fulfilment of eligibility criteria with respect to completion of Similar nature of work for Technical Eligibility Criteria and Total contract value for Financial Eligibility Criteria should be furnished along with the tender and should be submitted online at the time of tender bidding. Tenders not accompanied by documentary evidence in support of eligibility criteria will be summarily rejected. No post tender communication, in any form will be made or entertained, after opening of tenders, in this regard. Railways may however call for the originals of the credentials for verification or any clarifications/confirmations on the contents of the documents submitted.
Repair & maintenance work of existing Dy CE Con BGP Office at BGP , Malda Office, Officers Rest House at Bhagalpur, Jamalpur, Khalgaon, New Farakka, Mandarhill & Godda, Quarters at BGP, New Farakka, Malda & JMP, Construction of Boundary walls around quarters at Godda & ORH, Bhagalpur, Septic Tanks, Garrage, Gurad room and other ancillary Civil Works, Raising of Boundary Wall & other maintenance works in the jurisdiction of Deputy Chief Engineer(CON) Eastern Railway, Bhagalpur.
BGP04OF2025-26
BGP04OF2025-26
Open
Works - General
18 Months
Kolkata, West Bengal
₹0
₹12.7 L
21 Apr 2026
27 Mar 2026
7 Apr 2026
264 items across 4 schedules · ₹7,49,79,355.04 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | Supply of labour or Helpers for assistance to railway inspectors officers during inspection, supervision and measurement of field work etc. as per instruction of Engineer - in - Charge or his representative. For safety related works, competency will be ensured by the inspector concerned. | Man- Days | 900.00 | 561 | 5,04,900 |
| 2 | Drilling deep boring for sinking 250mm to 300mm dia tube well by any mechanical; method or by reverse circulation method in any kind of soil except rock. Drilling /Boring is to be done as per requirement and instruction of engineer-in-charge for Housing the casing pipe. The rate should include supply of all tools and plants, labour, materials, mechanical rig etc. lowering and extracting the drilling with all ancillary works to achieve the high yield & safe clean drinking water, casing pipe etc. of the following depth ( from GL to 120 m below (+/- 10 m). The rate includes the following items :- (i) Minimum dia 115 to max. 125mm PVC CASING PIPE PLAIN (ISI marked)-As per requirement for the purpose.(ii)Minimum dia 115 to max. 125mm PVC CASING PIPE Ribbed Filter (ISI marked )-As per requirement for the purpose. (iii ) Electric cable ISI marked of requirement length and core upto control panel, (iv) GI Binding wire as per requirement for hanging the pump. (v) Adopter good quality- 1set. (vi) Boring well cap- 1 no. (vii) Submersible pump- minimum 1.5 HP (Crompton Greeves or any similar approved) to give a minimun discharge 4000 litre/hour - 1set complete. (vii) Control panel board-1 no. (ix) Gravel of requirert size & specification or as required, Approx 4 m3 (x) All other required valve, tee, union, socket, jute, grease, reducers, threading, cutting, fiting, fixing complete in all respect. Note: [1] The rate includes Boring, Sinking, cleaning for a specified period to achieve the high Yield and safe clean drinking water free from sand/ earth etc. and fixing all above and such other accessories/materials. [2] Payment of this item shall be made only when the discharge after 24 hours continuous running is minimum 4000 litrs/hour. V notch and tank required for testing shall be made by the contractor The rate includes the cost of this work also and no extra payment will be made for this. [3] Pipes required for connecting pump to supply line shall be paid through Other Schedule of DSR. | Job | 3.00 | 2,64,989 | 7,94,967 |
| 3 | Supply of 12mm saint gob in or equivalent crystal clear glass of requires size for partition | Sqm | 100.00 | 277 | 27,700 |
| 4 | Charges for making 12mm frosted for privacy or durability or safety purpose and installation charges of mm glass including cutting, bending, edge finishing with all fitting and fixing | Square Foot | 450.00 | 185 | 83,250 |
| 5 | Providing and fixing toilet roll holder( CAN- 1153S) with stainless steel flap. | Each | 20.00 | 1,241 | 24,820 |
| 6 | Providing and fixing soap disc holder (CAN 1131N) | Each | 30.00 | 734 | 22,020 |
| 7 | Providing and fixing towel ring (CAN- 1121BN)round with round flange | Each | 30.00 | 1,023 | 30,690 |
| 8 | Providing and fixing curved shape urinal partition with froasted glass 8mm,10mm( 1810- UC/ 1110UC) | Each | 15.00 | 5,801 | 87,015 |
| 9 | Supplying , fitting , fixing of roller type Zebra Blind including all fittings and fixtures of any shade and design including all labour material complete including all taxes complete. | Sqm | 200.00 | 4,843 | 9,68,600 |
| 10 | Supplying, fitting and fixing of wall paper of approved quality and design with proper adhesive complete including finishing. | Sqm | 330.00 | 721 | 2,37,930 |
| 11 | Providing fitting and fixing in position synthetic vertical blind of special quality as approved by engineer including all taxes etc. | Sqm | 200.00 | 1,804 | 3,60,800 |
| 12 | Providing and fixing health Faucet (KUP 35041PM) 2 a bib cock with wall flange , water jet spray, hand shower ALD 573 (health faucet) with 8 mm dia 1.2 m long flexible tube and wall hook. | Each | 45.00 | 5,156 | 2,32,020 |
| 13 | Providing and fixing up of window or glazing door/glazing window or door curtain in required sizes as specified below of having the curtain cloth fabric material: 100% Polyester filament of Fast colours, Assorted colours plain and prints, Beige , cream, light brown, light colour with soft and smooth textured, good drapability & dobby of approved brands and colour as specified below with stiching specifications. "The stiching of the curtains shall be modem, functional with Eyelet, Platter, etc. for easy sliding and maintenance. The curtains will be stitched as per site requirement with necessary modification in stitching as per site or size requirement. For fabricating drapery heading, permanent finish buckram shall be double- folded into the heading (3 thickneses of fabric) and sewn with either clear monofilament or triple-strand polyester thread, colour matched to the fabric used the bottom of the buckram shall be sewn to the face of the fabric. The payment will be made as per number supplied and fixed as per instruction of Engineer-in-Charge. . The rate is excluding for supplying of Curtain rod, Palmets but inclusive of minor refixing of curtain rod or curtain with all hooks and necessary fittings. Separate payment will be made for supplying of curtain rod , if required. Specification:- 1. Cloth: Superior Quality of Fabric: 100 percentage Polyester 2. Curtain Window Size 4 x7 feets with stitching 3. Door Size 4 x7 feets with stitching. Stitching Specifications : 1. The stitching of the curtains shall be modern, functional with Eyelet, Platter, etc. for easy sliding and maintenance. 2. The curtains will be stitched as per site requirement with necessary modification in stitching as per site or size requirement. Curtain to be stitched both sides if required. 3. For fabricating Drapery heading, permanent finish buckram shall be double-folded into the heading (3 thicknesses of fabric) and sewn with either clear monofilament or triple-strand polyester thread, colour matched to the fabric used 4. The bottom of the buckram shall be sewn to the face of the fabric. Islets (1 ½ inch diameter with a ½ inch rim) or Islets (1 inch diameter with a 3/8 inch rim) shall be uniformly set across the heading, apart with the first and last from each end. Islets headers shall create a uniform, structured look that is both modern and functional presenting a clean look with built in hardware. Equidistant circles should be cut into the top of a draped fabric. Then circular metal islets should be secured within each one so that a curtain rod can slide right through with ease. 5. Upper side will have nefa with round cut Islets hole with click-clack Stainless Steel with bucrum lining (15-20 cm) to be supplied with curtain at 150-200 mm distance or as appropriate. 6. . Lower end to be stitched after double turn (nefa) to improve the fall of curtain. Lower nefa 150 mm to 200mm. | Numbers | 164.00 | 2,096.66 | 3,43,852.24 |
| Schedule total | ₹37,18,564.24 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
RevisedStandardTenderPDF_compressed.pdf Tender Document
ATTACHMENT
GCCACS11.pdf
ATTACHMENT
RevisedStandardTenderPDF_compressed.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .